| データシートサーチシステム |
|
8136L-AB3-D-R 販売店 |
| 販売店 | 部品番号 | メーカー | 部品情報 | Price | Qty. BuyNow | |
![]() TME | 4-643813-6 | TE Connectivity | Connector: wire-board; female; data; Inom: 5A; PIN: 16; 2.54mm; 22AWG RoHS : Compliant |
| 3,905 | |
| 6-178136-2 | TE Connectivity | Connector: wire-board; male; data; Inom: 8A; PIN: 3; shrouded; 5.08mm RoHS : Compliant |
| 3,780 | ||
| 2318136-8 | TE Connectivity | Plug; Inom: 5A; 250V; PIN: 8; vertical,straight; on PCBs; SMT; tinned RoHS : Compliant |
| 3,150 | ||
| 2081365-1 | TE Connectivity | Connector: SMA; plug; coaxial; 50Ω; RG316; soldering; gold-plated RoHS : Compliant |
| 450 | ||
| 368136-1 | TE Connectivity | Connector: wire-wire; plug; female; Automotive; 19A; PIN: 26; PBT RoHS : Compliant |
| 300 | ||
| 1-1478136-0 | TE Connectivity | Connector: BNC; male; coaxial; straight; 50Ω; soldering,clamp RoHS : Compliant |
| 116 | ||
| 1813640000 | Weidmüller Interface GmbH & Co. KG | Connector: pluggable terminal block; male; power supply; 1kV RoHS : Compliant |
| 12 | ||
| 8136R5KL.25 | TT Electronics plc | Potentiometer: shaft; 5kΩ; 2W; ±10%; 6.35mm; linear; L: 20.6mm |
| 4 | ||
| 1581360000 | Weidmüller Interface GmbH & Co. KG | Connector: pluggable terminal block; male; power supply; 14.5A RoHS : Compliant |
| 0 | ||
| 81-360-2-S | NEO TOOLS | Dungarees; Size: S; grey; DENIM; 400g/m2 |
| 0 | ||
| 81-361-2-XL | NEO TOOLS | Dungarees; Size: XL; grey; DENIM; 400g/m2 |
| 0 | ||
| 813697-SF | TE Connectivity | Filter: anti-interference; single-phase; 250VAC; Cx: 100nF; 1MΩ RoHS : Compliant |
| 0 | ||
| 81-360-2-XL | NEO TOOLS | Dungarees; Size: XL; grey; DENIM; 400g/m2 |
| 0 | ||
| 81-361-1-XXL | NEO TOOLS | Dungarees; Size: XXL; navy blue; DENIM; 400g/m2 |
| 0 | ||
| 1081-36-0 | Pomona Electronics | Test lead: single; 15A; Urated: 3kV; Len: 0.9144m; black; 1081 RoHS : Compliant |
| 0 | ||
![]() Avnet Americas | 3-643813-6 | TE Connectivity | - Bag (Alt: 3-643813-6) RoHS : Compliant |
| 36,300 | |
| CF-198136-001 | Amphenol Corporation | - Bag (Alt: CF-198136-001) RoHS : Not Compliant |
| 2,000 | ||
| CF-198136-000 | Amphenol Corporation | - Bulk (Alt: CF-198136-000) RoHS : Not Compliant | 1,771 | |||
| 22-28-1360-POS | Molex | Conn Partial Shrouded HDR 36 POS 2.54mm Solder RA Thru-Hole Bag - Bulk (Alt: 22-28-1360-POS) RoHS : Compliant |
| 1,764 | ||
| D20418-136 | ITT Interconnect Solutions | DSUB FEMALE SCREW LOCK ROHS - Bulk (Alt: D20418-136) RoHS : Not Compliant |
| 246 | ||
| MKT1813610255 | Vishay Intertechnologies | General Purpose Film Capacitor, Metallized Polyester, 10 uF, ? 10%, 160 V, 250 V, Through Hole - Bulk (Alt: MKT1813610255) RoHS : Compliant |
| 74 | ||
| 2318136-3 | TE Connectivity | Conn Poke-In Connector HDR 3 POS 8mm Solder RA SMD T/R - Tape and Reel (Alt: 71AC4746) RoHS : Compliant |
| 0 | ||
| TSOP58136 | Vishay Intertechnologies | IR SENSOR IC 36kHz -e3 - Bulk (Alt: TSOP58136) RoHS : Compliant |
| 0 | ||
GS88136CGT-250V![]() | GSI Technology | SRAM Chip Sync Single 1.8V/2.5V 9M-Bit 256K x 36 5.5ns/3ns 100-Pin TQFP Tray - Trays (Alt: GS88136CGT-250V) RoHS : Compliant |
| 0 | ||
| DSC1101AI2-081.3600 | Microchip Technology Inc | MEMS OSC, LVCMOS, 81.36MHz, 25PPM, 2.5-3.3V, -40 to 85C, 7.0 x 5.0mm - Rail/Tube (Alt: DSC1101AI2-081.3600) RoHS : Not Compliant |
| 0 | ||
| R573813640 | Radiall | - Bulk (Alt: R573813640) RoHS : Not Compliant |
| 0 | ||
| 78136078 | Qnity Laird | - Bulk (Alt: 78136078) RoHS : Compliant |
| 0 | ||
GS88136CGT-150IV![]() | GSI Technology | SRAM Chip Sync Single 1.8V/2.5V 9M-Bit 256K x 36 7.5ns/3.8ns 100-Pin TQFP Tray - Trays (Alt: GS88136CGT-150IV) RoHS : Compliant |
| 0 | ||
| 78136076 | Qnity Laird | - Bulk (Alt: 78136076) RoHS : Compliant |
| 0 | ||
| SEAC-020-08-13.6-TU-TU-N | Samtec Inc | B43706B6278M607 - Bulk (Alt: SEAC-020-08-13.6-TU-TU-N) RoHS : Compliant |
| 0 | ||
![]() Newark | 2318136-3 | TE Connectivity | Tb, Hdr, 8Mm, 3Positions; |Te Connectivity Buchanan 2318136-3 RoHS : Compliant |
| 1,400 | |
| 2318136-3 | TE Connectivity | Terminal Block, Header, 3Pos, Smd; |Te Connectivity Buchanan 2318136-3 RoHS : Compliant |
| 1,050 | ||
| 2318136-5 | TE Connectivity | Tb, Hdr, 8Mm, 5Positions; |Te Connectivity Buchanan 2318136-5 RoHS : Compliant |
| 1,050 | ||
| 2-178136-2 | TE Connectivity | Wtb Conn, Header, 3Pos, 1Row, 5.08Mm; |Te Connectivity Amp 2-178136-2 RoHS : Compliant |
| 881 | ||
| 1881367 | Phoenix Contact | Pluggable Terminal Block, 2.5Mm; |Phoenix Contact 1881367 RoHS : Compliant |
| 812 | ||
| 2318136-5 | TE Connectivity | Terminal Block, Header, 5Pos, Smd; |Te Connectivity Buchanan 2318136-5 RoHS : Compliant |
| 700 | ||
| MP008136 | SPC Multicomp | Tb, Wire To Brd, R/A, 12Way, 14Awg; |Multicomp Pro MP008136 RoHS : Compliant |
| 406 | ||
| 2318136-3 | TE Connectivity | Terminal Block, Header, 3Pos, Smd; Gende |Te Connectivity Buchanan 2318136-3 RoHS : Compliant |
| 350 | ||
| 2318136-3 | TE Connectivity | Terminal Block, Header, 3Pos, Smd; Gende |Te Connectivity Buchanan 2318136-3 RoHS : Compliant |
| 350 | ||
| 2318136-5 | TE Connectivity | Terminal Block, Header, 5Pos, Smd; Gende |Te Connectivity Buchanan 2318136-5 RoHS : Compliant |
| 350 | ||
| 2318136-5 | TE Connectivity | Terminal Block, Header, 5Pos, Smd; Gende |Te Connectivity Buchanan 2318136-5 RoHS : Compliant |
| 350 | ||
| FMCA2681-36 | Fairview Microwave Inc | Rf/Coaxial Cbl Assy, 36", 914.4Mm, Rg223; |Fairview Microwave FMCA2681-36 RoHS : Not Compliant |
| 4 | ||
| PDW1C-08136-NN46 | L-com Inc | Mux/Demux 8Ch 1527.22-1564.68 Nm 300 Mw; |L-Com PDW1C-08136-NN46 RoHS : Compliant |
| 4 | ||
| FMCA2813-60 | Fairview Microwave Inc | Ra N Male-N Female Cbl Rg402; |Fairview Microwave FMCA2813-60 RoHS : Not Compliant |
| 1 | ||
| FMHR0081-36 | Fairview Microwave Inc | Rf/Coaxial Cbl Assy, 36", 914.4Mm, Rg400; |Fairview Microwave FMHR0081-36 RoHS : Not Compliant |
| 1 | ||
![]() RS | 2318136-3 | TE Connectivity | TERMINAL BLOCK CONNECTOR WIREMATE 2-PIECE 8MM HDR ASSY 3 POS RoHS : Compliant |
| 1,400 | |
| 2318136-5 | TE Connectivity | TERMINAL BLOCK CONNECTOR WIREMATE 2-PIECE 8MM HDR ASSY 5 POS RoHS : Compliant |
| 1,050 | ||
| 2318136-4 | TE Connectivity | TERMINAL BLOCK CONNECTOR WIREMATE 2-PIECE 8MM HDR ASSY 4 POS RoHS : Compliant |
| 1,050 | ||
| 2318136-8 | TE Connectivity | TERMINAL BLOCK CONNECTOR WIREMATE 2-PIECE 8MM HDR ASSY 8 POS RoHS : Compliant |
| 700 | ||
| 2318136-7 | TE Connectivity | TERMINAL BLOCK CONNECTOR WIREMATE 2-PIECE 8MM HDR ASSY 7 POS RoHS : Compliant |
| 700 | ||
| 1881367 (FK-MC 0 5/ 6-ST-2 5) | Phoenix Contact | PCB PLUG PUSH-IN 2.5MM 20AWG 160V 4A 6 POSITION MICRO-COMBICON FK-MC SERIES |
| 39 | ||
| 28136 | Wiha Quality Tools | DRIVE-LOC VI SECURITY BLADE T30S AND T40S |
| 5 | ||
| 1981365 | RS Pro | GRAY ABS HAND HELD ENCLOSURE 130X68X25MM WITH INTEGRAL BATTERY COMPARTMENT IP54 |
| 5 | ||
| 4881364 | RS Pro | HAND RATCHET CRIMP TOOL, FLAG TERMINAL CONNECT, 22-10AWG, RIGHT-ANGLED |
| 4 | ||
| 3781-36-9 (1922891) | Pomona Electronics | MINIGRABBER TEST CLIP PATCH CORD 36 INCH WHITE |
| 4 | ||
| 3781-36-2 (1922816) | Pomona Electronics | MINIGRABBER TEST CLIP PATCH CORD 36 INCH RED |
| 4 | ||
| 48-13-6000 | Milwaukee Electric Tool Corporation | SHIP AUGER BIT 1-INCH X 18-INCH |
| 2 | ||
| 1081-36-0 (1942357) | Pomona Electronics | PATCH CORD MINIATURE STACKING BANANA PLUG EACH END 20 AWG BLACK 36" |
| 2 | ||
| 1081-36-2 (1942369) | Pomona Electronics | BANANA PLUG, 3000 VAC/VDC, 5, 20 AWG, 41 X 36, 0.087 IN., RED, 36 IN. |
| 1 | ||
| 8136 | Exair LLC | ION AIR KNIFE, 36" GEN 4 STANDARD |
| 0 | ||
![]() Microchip Technology Inc | DSC1101AI2-081.3600 | Microchip Technology Inc | MEMS OSC, LVCMOS, 81.36MHz, 25PPM, 2.5-3.3V, -40 to 85C, 7.0 x 5.0mm, VDFN, Projected EOL: 2051-07-27 RoHS : Compliant |
| 2,405 | |
| DSC1101AI2-081.3600T | Microchip Technology Inc | MEMS OSC, LVCMOS, 81.36MHz, 25PPM, 2.5-3.3V, -40 to 85C, 7.0 x 5.0mm, VDFN, Projected EOL: 2051-07-27 RoHS : Compliant |
| 2,405 | ||
| DSC1003AI1-081.3600 | Microchip Technology Inc | MEMS OSC, LVCMOS, 81.36MHz, 50PPM, 1.8-3.3V, -40 to 85C, 7.0 x 5.0mm, VDFN, Projected EOL: 2051-07-15 RoHS : Compliant |
| 0 | ||
| DSC1004AI1-081.3600 | Microchip Technology Inc | MEMS OSC, LVCMOS, 81.36MHz, 50PPM, 1.8-3.3V, -40 to 85C, 7.0 x 5.0mm, VDFN, Projected EOL: 2051-07-22 RoHS : Compliant |
| 0 | ||
| DSC1003AI1-081.3600T | Microchip Technology Inc | MEMS OSC, LVCMOS, 81.36MHz, 50PPM, 1.8-3.3V, -40 to 85C, 7.0 x 5.0mm, VDFN, Projected EOL: 2051-07-15 RoHS : Compliant |
| 0 | ||
| DSC1004AI1-081.3600T | Microchip Technology Inc | MEMS OSC, LVCMOS, 81.36MHz, 50PPM, 1.8-3.3V, -40 to 85C, 7.0 x 5.0mm, VDFN, Projected EOL: 2051-07-22 RoHS : Compliant |
| 0 | ||
![]() Bisco Industries | MS35338-136 | ITW Shakeproof | 7,246,109 | |||
| MS35338-136 | MS Washers | 197,686 | ||||
| MS35338-136B | MS Washers | 57,528 | ||||
| MS51038-136 | Cam-Tech Industries Incorporated | 125 | ||||
| 09-8136-1-01 | Staffall | 100 | ||||
| 2081361-1 | MISC. INDUSTRIAL CONNECTORS | 12 | ||||
| 8136 | Holo-Krome | 10 | ||||
| 8136-632-A | RAF Electronic Hardware | 10 | ||||
| 8136-651P2 | TE Connectivity | RoHS : Compliant | 9 | |||
| 8136-832-A | RAF Electronic Hardware | 4 | ||||
| 3781-36-0 | Pomona Electronics | RoHS : Compliant | 2 | |||
| 18136888 | Misc. Rods and Studs | 1 | ||||
![]() Rochester Electronics | LV8136V-MPB-H | onsemi | Motor Driver ICs Controller - Commutation, Direction Management 30-SOP Fan-Fold RoHS : Compliant |
| 576 | |
| LV8136V-TLM-H | onsemi | Brushless DC Motor Controller, 0.015A, BICMOS, PDSO30 RoHS : Compliant |
| 52,547 | ||
| UCC5630MWP/81364 | Texas Instruments | IC SCSI, LVD, SE 9 LINE TERM 2.7V - 5.25V 36-SOP RoHS : Not Compliant |
| 1,984 | ||
THS8136IPHP![]() | Texas Instruments | Special Purpose Data Converter 10Bits 3 CH Video DAC Parallel 48-QFP Tray RoHS : Compliant |
| 353 | ||
THS8136IPHPR![]() | Texas Instruments | Special Purpose Data Converter 10Bits 3 CH Video DAC Parallel 48-QFP T/R RoHS : Compliant |
| 2,380 | ||
| UCC5630MWPTR/81364 | Texas Instruments | IC SCSI, LVD, SE 9 LINE TERM 2.7V - 5.25V 36-SOP RoHS : Not Compliant |
| 2,000 | ||
THS8136IPHPRQ1![]() | Texas Instruments | D/A Converter, 1 Func, Parallel, Word Input Loading, 0.015us Settling Time, PQFP48 RoHS : Compliant |
| 84,002 | ||
| AY-5-8136/J | Microchip Technology Inc | Dual Baud Rate Generator |
| 1,316 | ||
| ISL28136FHZ-T7 | Renesas Electronics Corporation | ISL28136 - 5MHz, Single Precision Rail-to-Rail Input-Output (RRIO) Op Amp RoHS : Compliant |
| 6,000 | ||
| LV8136V-TLM-H | SANYO Semiconductor Co Ltd | Brushless DC Motor Controller, 0.015A, BICMOS, PDSO30 RoHS : Compliant |
| 1,000 | ||
| COM8136-6P | SMSC | Dual Baud Rate Generator RoHS : Not Compliant |
| 522 | ||
| COM8136CD | SMSC | Micro Peripheral IC, MOS, CDIP18 RoHS : Not Compliant |
| 27 | ||
| COM8136T-027CD | SMSC | Dual Baud Rate Generator RoHS : Not Compliant |
| 2,261 | ||
| COM8136T-041P | SMSC | Dual Baud Rate Generator RoHS : Not Compliant |
| 620 | ||
| COM8136T-P | SMSC | Dual Baud Rate Generator |
| 310 | ||
![]() Sager | 9813608136 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | ||
| 9813618136 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 0873813671 | Molex | Headers & Wire Housings | 0 | |||
| 0022281364 | Molex | Headers & Wire Housings KK 100 Hdr FrLk RtAn 36 Ckt 15 SGold | 0 | |||
| 2238136-2 | TE Connectivity | Rectangular MIL Spec Connectors RECEPTACLE, POSITIVE-LOCK, RAST 6.35 RoHS : Compliant |
| 0 | ||
| 7706608136 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 7707218136 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 2318136-3 | TE Connectivity | Pluggable Terminal Blocks 8MM HDR ASSY, 3 POS WIREMATE 2-PIECE RoHS : Compliant |
| 0 | ||
| 68136 | TE Connectivity | Other Tools JAW ASSY SOLIS 68068 #6 | 0 | |||
| 78136078 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding LS-26 .75X24X24 |
| 0 | ||
| 281369-2 | TE Connectivity | Terminals .197 FASTON RCPT CTC SNPL |
| 0 | ||
| 9813602018 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9813602063 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9813602144 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9813603035 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
![]() ComSIT USA | BFC233828136 | Vishay Intertechnologies | INTERFERENCE SUPPRESSION FILM CAPACITOR Film Capacitor, Polypropylene, 800V, 10% +Tol, 10% -Tol, 0.47uF, Through Hole Mount RoHS : Compliant | 3,400 | ||
![]() Interstate Connecting Components | 22-28-1361 | Molex | KK 100 HDR FRLK RTAN 36 CKT 1 SGOLD RoHS : Compliant |
| 1,079 | |
| 2238136-2 | TE Connectivity | RECEPTACLE, POSITIVE-LOCK, RAS RoHS : Compliant |
| 0 | ||
| 2318136-3 | TE Connectivity | TWO-PIECE POKE-IN, 8MM HEADER, RoHS : Compliant |
| 0 | ||
| 248-136-1614S-02 | Amphenol Aerospace | 26500 POWER CONTACT | 0 | |||
| 281369-2 | TE Connectivity | .197 FASTON RCPT CTC SNPL |
| 0 | ||
| 82A0813-6-9-F874 | TE Connectivity | 82A0813-6-9-F874 | 0 | |||
| IT40581-36FM40F6 | Glenair Inc | 0 | ||||
| 7-178136-2 | TE Connectivity | DYNAMIC D3200 HDR V ASSY 3P PD RoHS : Compliant | 0 | |||
| 2081361-1 | TE Connectivity | RoHS : Compliant |
| 0 | ||
| 2318136-5 | TE Connectivity | TWO-PIECE POKE-IN, 8MM HEADER, RoHS : Compliant |
| 0 | ||
| 813649-011 | TE Connectivity | EPKJ-17D/1XU-1HL | 0 | |||
| 68498-136HLF | Amphenol FCi | BERG II SR RIGHT RoHS : Compliant |
| 0 | ||
| G88MP08136KEU | Amphenol Commercial | G88MP08136KEU-MICROPWR PLUS,VT | 0 | |||
| 2-178136-3 | TE Connectivity | DYNAMIC D3200 HDR V ASSY 3P RoHS : Compliant |
| 0 | ||
| 8136003001 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYC99M0111-22-2LCK0001 | 0 | |||
![]() NexGen Digital | W681360RG | Nuvoton Technology Corp | RoHS : Compliant | 63,772 | ||
![]() PEI Genesis | CF-198136-000 | Amphenol Corporation |
| 540 | ||
| CF-198136-001 | Amphenol Corporation |
| 3 | |||
![]() Powell Electronics | 2318136-3 | TE Connectivity | Terminal Blocks RoHS : Compliant |
| 8,313 | |
| 2307813-6 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 5,346 | ||
| 2318136-5 | TE Connectivity | Terminal Blocks RoHS : Compliant |
| 2,772 | ||
| 6-178136-2 | TE Connectivity | Connectors RoHS : Compliant |
| 2,504 | ||
| 2318136-4 | TE Connectivity | Terminal Blocks RoHS : Compliant |
| 2,079 | ||
| BU-P1081-36-0 | Mueller Electric Company | TL ,mini stackable banana black 36 inch |
| 459 | ||
| 2081365-1 | TE Connectivity | Connectors RoHS : Compliant |
| 297 | ||
| 1-1478136-0 | TE Connectivity | Connectors RoHS : Compliant |
| 292 | ||
| TW-03-07-LM-D-408-136 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 271 | ||
| 2-178136-2 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 103 | ||
| 1-643813-6 | TE Connectivity | Connectors RoHS : Not Compliant |
| 83 | ||
| 8-1393813-6 | TE Connectivity | Relays |
| 17 | ||
| R-10813-6 | TE Connectivity | SENSOR R-10813-6 |
| 7 | ||
| 248-136-2016S-02 | Amphenol Corporation | 26500 CONNECTOR POWER CONTACT |
| 6 | ||
| A81367-000 | TE Connectivity | CABLE-PROTECTION PART A81367-000 RoHS : Compliant |
| 1 | ||
![]() Richardson RFPD | R573813640 | Radiall | RF Switch SP6T 0MHz to 40GHz 50dB RoHS : Not Compliant |
| 0 | |
| R413813650 | Radiall | Fixed Coax Attenuatr RoHS : Compliant | 0 | |||
| R573813600 | Radiall | RF Switch SP6T 0MHz to 40GHz 50dB RoHS : Not Compliant |
| 0 | ||
| R573813645 | Radiall | SP6 R 2.9 NoI 28 C+D Ds RoHS : Not Compliant |
| 0 | ||
| R573813615 | Radiall | RF Switch SP6T 0MHz to 40GHz 50dB RoHS : Not Compliant |
| 0 | ||
| R413813600 | Radiall | RF Coaxial Attenuators | 0 | |||
| 22658136 | HUBER+SUHNER | Conn 7/16 Adapter 0Hz to 7.5GHz 50Ohm ST RCP/RCP S RoHS : Compliant |
| 0 | ||
| 935281363128 | NXP Semiconductors | I2C/SPI Interface 400kHz 2.7V/3.6V 24-Pin HVQFN EP RoHS : Compliant | 0 | |||
| R574813645 | Radiall | SP6Z R2.9 NOI 28 C+D DS |
| 0 | ||
| R573813625 | Radiall | RF Switch SP6T 0MHz to 40GHz 50dB RoHS : Not Compliant |
| 0 | ||
| R574813615 | Radiall | SP6Z R 2.9 NOI 28 C+ DS RoHS : Not Compliant |
| 0 | ||
| R573813610 | Radiall | RF Switch SPnT 0MHz to 40GHz RoHS : Not Compliant |
| 0 | ||
| R574813625 | Radiall | RF Switch SP6T 0MHz to 40GHz 50dB RoHS : Compliant |
| 0 | ||
![]() Chip 1 Exchange | 521458136- | INSTOCK | 66,765 | |||
| 225520813649 | Burr-Brown Corp | INSTOCK | 15,000 | |||
| W681360RGTR | Winbond Electronics Corp | INSTOCK | 501 | |||
| W681360RGTR | Winbond Electronics Corp | INSTOCK | 501 | |||
| W681360RG | Nuvoton Technology Corp | INSTOCK RoHS : Compliant | 500 | |||
| MKT1813610016 | Vishay Intertechnologies | INSTOCK | 141 | |||
| MKT1813-610/015 | INSTOCK | 81 | ||||
| MS35338-136 | INSTOCK | 30 | ||||
![]() Avnet Abacus | 1881367 | Phoenix Contact | Pluggable Terminal Block 25 mm 6 Ways 26 AWG 20 AWG 05 mm Push In (Alt: 1881367) RoHS : Compliant | 150 | ||
| 68136 | TE Connectivity | (Alt: 68136) RoHS : Not Compliant | 0 | |||
| 281369-2 | TE Connectivity | Contact RCP Crimp ST Cable Mount Reel (Alt: 281369-2) RoHS : Compliant | 0 | |||
| 2238136-2 | TE Connectivity | (Alt: 2238136-2) RoHS : Compliant | 0 | |||
| 2318136-3 | TE Connectivity | Conn PokeIn Connector HDR 3 POS 8mm Solder RA SMD TR (Alt: 2318136-3) RoHS : Compliant | 0 | |||
| 2318136-5 | TE Connectivity | Conn PokeIn Connector HDR 5 POS 8mm Solder RA SMD TR (Alt: 2318136-5) RoHS : Compliant | 0 | |||
| 2081362-1 | TE Connectivity | Connector SMA Receptacle 0GHz to 124GHz 50Ohm Solder Right Angle Through Hole Gold (Alt: 2081362-1) | 0 | |||
| 1813650000 | Weidmüller Interface GmbH & Co. KG | (Alt: 1813650000) RoHS : Compliant | 0 | |||
| 7-178136-2 | TE Connectivity | (Alt: 7-178136-2) RoHS : Compliant | 0 | |||
| 1813620000 | Weidmüller Interface GmbH & Co. KG | (Alt: 1813620000) RoHS : Compliant | 0 | |||
| 2-178136-3 | TE Connectivity | Conn Power M 3 POS 508mm Solder ST ThruHole 3 Terminal 1 Port Tube (Alt: 2-178136-3) RoHS : Compliant | 0 | |||
| 2-178136-3 | TE Connectivity | Conn Power M 3 POS 508mm Solder ST ThruHole 3 Terminal 1 Port Tube (Alt: 2-178136-3) RoHS : Compliant | 0 | |||
| 8136003001 | TE Connectivity | (Alt: 8136003001) RoHS : Compliant | 0 | |||
| 8-2151813-6 | TE Connectivity | (Alt: 8-2151813-6) RoHS : Not Compliant | 0 | |||
| MKT1813610015R | Vishay Intertechnologies | General Purpose Film Capacitor Metallized Polyester 10 uF 10 63 V 100 V Through Hole - Tape and Reel (Alt: MKT1813610015R) RoHS : Compliant | 0 | |||
![]() Avnet Asia | LXMSAPHA08-136 | Murata Manufacturing Co Ltd | (Alt: LXMSAPHA08-136) RoHS : Compliant | 0 | ||
| 3-643813-6 | TE Connectivity | (Alt: 3-643813-6) RoHS : Compliant | 0 | |||
![]() Avnet Silica | GS88136CGD-200![]() | GSI Technology | SRAM Chip Sync Single 25V33V 9MBit 256K x 36 65ns3ns 165Pin FBGA Tray (Alt: GS88136CGD-200) RoHS : Compliant | 0 | ||
GS88136CGT-200![]() | GSI Technology | SRAM Chip Sync Single 25V33V 9MBit 256K x 36 65ns3ns 100Pin TQFP Tray (Alt: GS88136CGT-200) RoHS : Compliant | 0 | |||
GS88136CGT-150![]() | GSI Technology | SRAM Chip Sync Single 25V33V 9MBit 256K x 36 75ns38ns 100Pin TQFP Tray (Alt: GS88136CGT-150) RoHS : Compliant | 0 | |||
GS88136CGD-200I![]() | GSI Technology | SRAM Chip Sync Single 25V33V 9MBit 256K x 36 65ns3ns 165Pin FBGA Tray (Alt: GS88136CGD-200I) RoHS : Compliant | 0 | |||
GS88136CGD-150I![]() | GSI Technology | SRAM Chip Sync Single 25V33V 9MBit 256K x 36 75ns38ns 165Pin FBGA Tray (Alt: GS88136CGD-150I) RoHS : Compliant | 0 | |||
GS88136CGT-150I![]() | GSI Technology | SRAM Chip Sync Single 25V33V 9MBit 256K x 36 75ns38ns 100Pin TQFP Tray (Alt: GS88136CGT-150I) RoHS : Compliant | 0 | |||
| DSC1003AI1-081.3600 | Microchip Technology Inc | MEMS OSC LVCMOS 8136MHz 50PPM 1833V 40 to 85C 70 x 50mm (Alt: DSC1003AI1-081.3600) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | ESS-10-81-36.5K-1% | Vishay Intertechnologies | IN STOCK SHIP TODAY |
| 495 | |
| AK8136A-E2 | Asahi Kasei Microsystems Corporation | IN STOCK SHIP TODAY | 175 | |||
| 643813-6 | Pancon Corporation | IN STOCK SHIP TODAY |
| 82 | ||
| C8136-04 | Texas Instruments | IN STOCK SHIP TODAY |
| 62 | ||
| 8136-475G23 | IN STOCK SHIP TODAY |
| 52 | |||
| 958-13-68SM15-90 | Methode Electronics Inc | IN STOCK SHIP TODAY | 41 | |||
THS8136IPHP![]() | Texas Instruments | IN STOCK SHIP TODAY RoHS : Compliant |
| 40 | ||
| MS35338-136 | IN STOCK SHIP TODAY | 21 | ||||
| COM8136 | SMSC | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 18 | ||
| 22-28-1360 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 6 | ||
| 0022281360 | Molex | IN STOCK SHIP TODAY |
| 6 | ||
| TC8136-16 | TE Connectivity | IN STOCK SHIP TODAY |
| 6 | ||
| 1081-36-0 | Pomona Electronics | IN STOCK SHIP TODAY RoHS : Compliant |
| 3 | ||
| 813643 | Weidmüller Interface GmbH & Co. KG | IN STOCK SHIP TODAY | 1 | |||
| 1081-36-2 | Pomona Electronics | IN STOCK SHIP TODAY RoHS : Compliant |
| 1 | ||
![]() DB Roberts | 8136-632-SS | RAF Electronic Hardware | 0 | |||
| 47-81-366-51 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 47-81-364-10 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 88136 | Pop Rivets | SNAD3065BS 001 S5C | 0 | |||
| 8136-632-A | RAF Electronic Hardware | 0 | ||||
| 47-81-366-50 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 47-81-362-50 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 47-81-362-10 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 47-81-362-51 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 47-81-364-11 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 47-81-362-11 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 8136-832-A-7 | RAF Electronic Hardware | 0 | ||||
| 47-81-364-51 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 8136-832-SS-26 | RAF Electronic Hardware | 0 | ||||
| 47-81-364-50 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
![]() EBV Elektronik | TSOP38136 | Vishay Intertechnologies | IR Sensor IC 36kHz e3 (Alt: TSOP38136) RoHS : Compliant | 0 | ||
![]() Master Electronics | 281369-2 | TE Connectivity | .197 FASTON RCPT CTC SNPL RoHS : Compliant |
| 21,500 | |
| 2238136-2 | TE Connectivity | RECEPTACLE POSITIVE-LOCK RAST 6.35 MOQ Reduction RoHS : Compliant |
| 0 | ||
| 701781363 | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
| FW-02-03-L-D-208-136 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-S-D-168-136 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-G-D-098-136 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-G-D-128-136 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-L-D-158-136 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-LM-D-108-136 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FFMD-03-S-81.36-01 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DSC1101AI2-081.3600 | Microchip Technology Inc | MEMS OSC LVCMOS 81.36MHz 25PPM 2.5-3.3V -40 to 85C 7.0 RoHS : Compliant |
| 0 | ||
| 82A0813-6-9-F874 | TE Connectivity | Hook-up Wire 1Conductors 6AWG 7.03mm Nickel Coated Copper White 600VAC MOQ Reduction RoHS : Compliant |
| 0 | ||
| SEAC-020-08-13.6-TU-TU-N | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-G-D-108-136 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-H-D-198-136 | Samtec Inc | RoHS : Compliant |
| 0 | ||
![]() Neutron USA | 1708136 | Phoenix Contact | Fixed Terminal Blocks 12P 3.81mm 90DEG RoHS : Compliant |
| 50 | |
| 1881367 | Phoenix Contact | PCB Connector, Female, Push-In 2.5mm 20AWG 160V 4A, 1row 6 Position, FK-MC 0,5/ 6-ST-2,5 RoHS : Compliant |
| 50 | ||
| U350018-1361-24VDC | Norgren | VALVE, S3,2WNC,1/4NPT,BRKT SLOTTED,SS, KIP |
| 43 | ||
| AR8136WHT | APC by Schneider Electric | Schneider Electric APC 1U 19" White Modular Toolless Blanking Panel - Qty 10 |
| 21 | ||
| 1081-36-0 | Pomona Electronics | Patch Cord Miniature Stacking Banana Plug Each End 20 Awg Black 36" RoHS : Compliant |
| 2 | ||
| AR8136BLK200 | APC by Schneider Electric | APC 1U 19" Black Modular Toolless Blanking Panel |
| 2 | ||
| 1581360000 | Weidmüller Interface GmbH & Co. KG | Fixed Terminal Blocks SL 5.00/06/180 3.2SN OR BX RoHS : Compliant |
| 2 | ||
| VDV813-619 | Klein Tools Inc | RF Connectors / Coaxial Connectors Universal BNC Compression Connectors RG59 35-Pack |
| 1 | ||
| 1081-36-2 | Pomona Electronics | Banana Plug, 3000 VAC/VDC, 5, 20 AWG, 41 x 36, 0.087 in., Red, 36 in. RoHS : Compliant |
| 1 | ||
| AR8136BLK | APC by Schneider Electric | APC 1U 19" Black Modular Toolless Blanking Panel |
| 0 | ||
| 2981363, PSR-SCF- 24UC/URM/2X21 | Phoenix Contact | Phoenix Contact 2981363 Safety Relays, Safety, 1 Channel, 250 VAC/VDC, PSR CLASSIC Series |
| 0 | ||
| 2981363 | Phoenix Contact | Safety Relays PSR-SCP-24UC/URM TYPE C DPDT RoHS : Compliant |
| 0 | ||
| 1088136 | Phoenix Contact | Module carrier, Backplane, 6 slots, for Axioline Smart Elements, AXL F BP SE6 |
| 0 | ||
| 2481360000 | Weidmüller Interface GmbH & Co. KG | Circuit Breakers MCB 1077 3P D 20A ACDC |
| 0 | ||
![]() Pasternack Enterprises US | PE3W18136LF/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240-FR, RF Cable Type: LMR-240-FR, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to SMA Male Right Angle Low Loss Cable 24 Inch Length Using LMR-240-FR Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male to SMA male right angle low loss cable 24 inch length using LMR-240-FR coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA male right angle low loss cable 24 inch length using LMR-240-FR coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a right angle SMA cable connection on the other. Our low loss SMA to right angle SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W18136LF/HS-24 can also be known as a low loss SMA plug to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W18136LF/HS-24 RF cable has a FRPE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. Our SMA male to right angle SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3W18136LF/HS-24 is built with LMR-240-FR which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W18136LF/HS-24 can also be used in the other direction and will be a right angle SMA male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 988 | |
| PE3W18136LF/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240-FR, RF Cable Type: LMR-240-FR, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Male to SMA Male Right Angle Low Loss Cable 48 Inch Length Using LMR-240-FR Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male to SMA male right angle low loss cable 48 inch length using LMR-240-FR coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA male right angle low loss cable 48 inch length using LMR-240-FR coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a right angle SMA cable connection on the other. Our low loss SMA to right angle SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W18136LF/HS-48 can also be known as a low loss SMA plug to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W18136LF/HS-48 RF cable has a FRPE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. Our SMA male to right angle SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3W18136LF/HS-48 is built with LMR-240-FR which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W18136LF/HS-48 can also be used in the other direction and will be a right angle SMA male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 988 | ||
| PE3W18136-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240-FR, RF Cable Type: LMR-240-FR, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Fire Rated SMA Male Right Angle to SMA Male Low Loss Cable 12 Inch Length Using LMR-240-FR Coax., Radio frequency assembly fire rated SMA male right angle to SMA male low loss cable 12 inch length using LMR-240-FR coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated SMA male right angle to SMA male low loss cable 12 inch length using LMR-240-FR coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a SMA cable connection on the other. Our low loss right angle SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W18136-12 can also be known as a low loss right angle SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W18136-12 RF cable has a FRPE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. Our right angle SMA male to SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3W18136-12 is built with LMR-240-FR which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W18136-12 can also be used in the other direction and will be a SMA male to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 988 | ||
| PE3W18136LF/HS-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240-FR, RF Cable Type: LMR-240-FR, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to SMA Male Right Angle Low Loss Cable 12 Inch Length Using LMR-240-FR Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male to SMA male right angle low loss cable 12 inch length using LMR-240-FR coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA male right angle low loss cable 12 inch length using LMR-240-FR coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a right angle SMA cable connection on the other. Our low loss SMA to right angle SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W18136LF/HS-12 can also be known as a low loss SMA plug to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W18136LF/HS-12 RF cable has a FRPE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. Our SMA male to right angle SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3W18136LF/HS-12 is built with LMR-240-FR which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W18136LF/HS-12 can also be used in the other direction and will be a right angle SMA male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 988 | ||
| PE3W18136-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240-FR, RF Cable Type: LMR-240-FR, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Fire Rated SMA Male Right Angle to SMA Male Low Loss Cable 36 Inch Length Using LMR-240-FR Coax., Radio frequency assembly fire rated SMA male right angle to SMA male low loss cable 36 inch length using LMR-240-FR coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated SMA male right angle to SMA male low loss cable 36 inch length using LMR-240-FR coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a SMA cable connection on the other. Our low loss right angle SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W18136-36 can also be known as a low loss right angle SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W18136-36 RF cable has a FRPE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. Our right angle SMA male to SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3W18136-36 is built with LMR-240-FR which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W18136-36 can also be used in the other direction and will be a SMA male to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 988 | ||
| PE3W18136LF/HS-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240-FR, RF Cable Type: LMR-240-FR, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Male to SMA Male Right Angle Low Loss Cable 60 Inch Length Using LMR-240-FR Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male to SMA male right angle low loss cable 60 inch length using LMR-240-FR coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA male right angle low loss cable 60 inch length using LMR-240-FR coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a right angle SMA cable connection on the other. Our low loss SMA to right angle SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W18136LF/HS-60 can also be known as a low loss SMA plug to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W18136LF/HS-60 RF cable has a FRPE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. Our SMA male to right angle SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3W18136LF/HS-60 is built with LMR-240-FR which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W18136LF/HS-60 can also be used in the other direction and will be a right angle SMA male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 843 | ||
| PE3W18136-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240-FR, RF Cable Type: LMR-240-FR, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. Fire Rated SMA Male Right Angle to SMA Male Low Loss Cable 60 Inch Length Using LMR-240-FR Coax., Radio frequency assembly fire rated SMA male right angle to SMA male low loss cable 60 inch length using LMR-240-FR coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated SMA male right angle to SMA male low loss cable 60 inch length using LMR-240-FR coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a SMA cable connection on the other. Our low loss right angle SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W18136-60 can also be known as a low loss right angle SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W18136-60 RF cable has a FRPE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. Our right angle SMA male to SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3W18136-60 is built with LMR-240-FR which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W18136-60 can also be used in the other direction and will be a SMA male to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 843 | ||
| PE3W00781-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. 2.92mm Male to 2.4mm Female Cable 36 Inch Length Using PE-SR405AL Coax., Radio frequency assembly 2.92mm male to 2.4mm female cable 36 inch length using PE-SR405AL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to 2.4mm female cable 36 inch length using PE-SR405AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.92mm to 2.4mm cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with 2.92mm cable connection on one end and 2.4mm cable connection on the other. Our 2.92mm to 2.4mm cable assembly has male gender on end 1 and female on end 2. PE3W00781-36 can also be known as a 2.92mm plug to 2.4mm jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. 2.92mm plug to 2.4mm jack cable assembly PE3W00781-36 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to 2.4mm cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a clamp/solder attachment method and a passivated stainless steel body with plating. Additional dimensions, specifications and CAD drawings for this PE3W00781-36 RF cable are available on our downloadable PDF datasheet.PE3W00781-36 can also be used in the other direction and will be 2.4mm female to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to 2.4mm jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm RF cable assembly as per your requirements. |
| 73 | ||
| PE3W08136/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. N Female to SMA Female Cable Using LMR-195 Coax with HeatShrink. PE3W08136/HS is a N female to SMA female cable using LMR-195 coax. This Pasternack N female to SMA female cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. Our female N to female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08136/HS N female to SMA female cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W08136 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. SMA Female to N Female Cable Using LMR-195 Coax. PE3W08136 is a SMA female to N female cable using LMR-195 coax. This Pasternack SMA female to N female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. Our female SMA to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08136 SMA female to N female cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W11181-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to N Male Low PIM Cable 36 Inch Length Using 1/4 inch Superflexible Coax., Radio frequency assembly SMA male to N male low PIM cable 36 inch length using 1/4 inch superflexible coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to N male low PIM cable 36 inch length using 1/4 inch superflexible coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with SMA cable connection on one end and type N cable connection on the other. Our low PIM SMA to N type cable assemblies have a male gender on end 1 and male on end 2. PE3W11181-36 can also be known as a low PIM SMA plug to N type plug cable assembly and will be shipped same-day as it is purchased. SMA plug to type N plug cable assembly PE3W11181-36 is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency low PIM SMA male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W11181-36 can also be used in the other direction and will be N type male to SMA male cable assembly if the opposite connectivity is required. Low PIM SMA plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to N type cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N male low PIM cable 36 inch length using 1/4 inch superflexible coax. |
| 0 | ||
| PE3C8181-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMC, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to SSMC Plug Low Loss Cable 36 Inch Length Using LMR-100 Coax., Radio frequency assembly SMA male to SSMC plug low loss cable 36 inch length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SSMC plug low loss cable 36 inch length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SSMC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SSMC cable connection on the other. Our low loss SMA to SSMC cable assembly has a male gender on end 1 and a plug on end 2. PE3C8181-36 can also be known as a low loss SMA plug to SSMC male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C8181-36 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our SMA male to SSMC plug cable has a maximum VSWR of 1.4:1. SMA plug to SSMC male cable assembly PE3C8181-36 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SSMC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder (captive contact) attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C8181-36 can also be used in the other direction and will be a SSMC plug to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SSMC male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SSMC cable assembly for quick shipment worldwide. Variations of SMA and SSMC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SSMC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3M0281-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BMA, Connector 1 Size: 8, Connector 1 Gender: Socket, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Specification: MIL-STD-348A, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Passivated, RF Cable Part Number: PE-P141, RF Cable Type: Coax, RF Cable Specification: PE-P141 datasheet, RF Cable Impedance : 50 Ohm. BMA Size 8 D38999 Contact Socket to SMA Male Cable 36 Inch Length Using PE-P141 Coax with HeatShrink, LF Solder. The PE3M0281-36 from Pasternack is a D38999 contact cable assembly that is built with a size 8 BMA socket contact connection on one end and a SMA male connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This BMA to SMA cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 18 GHz. The PE3M0281-36 RF cable has a FEP jacket of 0.163-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 165 degrees C. Our BMA socket to SMA male cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. BMA socket to SMA male cable assembly is built with PE-P141, which is a flexible coax type. The Pasternack PE3M0281-36 flexible cable assembly has a 50 Ohm impedance and is double-shielded. Additional dimensions, specifications, and CAD drawings for this BMA to SMA RF cable are available on our downloadable PDF datasheet. BMA socket to SMA male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of BMA and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMA to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3M0381-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: M39029, Connector 1 Size: 8, Connector 1 Gender: Pin, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: M39029, Connector 2 Size: 8, Connector 2 Gender: Pin, Connector 2 Specification: MIL-DTL-38999, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P141, RF Cable Type: Coax, RF Cable Specification: PE-P141 datasheet, RF Cable Impedance : 50 Ohm. MIL Size 8 Contact Pin to MIL Size 8 Contact Pin Cable 36 Inch Length Using PE-P141 Coax with HeatShrink, LF Solder. The PE3M0381-36 from Pasternack is a D38999 contact cable assembly that is built with a size 8 M39029 pin contact connection on one end and a M39029 pin connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This M39029 to M39029 cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 3 GHz. The PE3M0381-36 RF cable has a FEP jacket of 0.163-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 125 degrees C. Our M39029 pin to M39029 pin cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The PE3M0381-36 in-series RF cable has 0.8 inches of repeated minimum bend radius along with 110 dB of minimum RF shielding. M39029 pin to M39029 pin cable assembly is built with PE-P141, which is a flexible coax type. The Pasternack PE3M0381-36 flexible cable assembly has a 50 Ohm impedance and is double-shielded. Additional dimensions, specifications, and CAD drawings for this M39029 to M39029 RF cable are available on our downloadable PDF datasheet. M39029 pin to M39029 pin cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of M39029 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal M39029 to M39029 RF cable assembly as per your requirements. |
| 0 | ||
| PE3C9581-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: MMCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. MMCX Plug Right Angle to SMA Female Bulkhead Cable 36 Inch Length Using PE-P086 Coax., Radio frequency assembly MMCX plug right angle to SMA female bulkhead cable 36 inch length using PE-P086 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The MMCX plug right angle to SMA female bulkhead cable 36 inch length using PE-P086 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MMCX to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle MMCX cable connection on one end and a SMA bulkhead cable connection on the other. Our right angle MMCX to SMA cable assembly has a plug gender on end 1 and a female on end 2. PE3C9581-36 can also be known as a right angle MMCX male to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9581-36 RF cable has a FEP jacket of 0.104-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 110 dB. Our right angle MMCX plug to bulkhead SMA female cable has a maximum VSWR of 1.4:1. MMCX male to SMA jack cable assembly PE3C9581-36 is built with PE-P086 which is a flexible coax type. The Pasternack flexible MMCX cable assembly is manufactured with right angle MMCX to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with gold over nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C9581-36 can also be used in the other direction and will be a SMA female bulkhead to right angle MMCX plug cable assembly if the opposite connectivity is required. MMCX right angle male to SMA jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MMCX to SMA cable assembly for quick shipment worldwide. Variations of MMCX and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MMCX to SMA RF cable assembly as per your requirements. |
| 0 | ||
![]() Vyrian | LXMSAPHA08-136 | Murata Manufacturing | Telecom Circuit, 1-Func | 12,214 | ||
| LV8136V-MPB-H | onsemi | Brushless DC Motor Controller, 0.015A, BICMOS, PDSO30 RoHS : Compliant | 11,256 | |||
LP2981-36DBVT![]() | Texas Instruments | Fixed Positive LDO Regulator, 3.6V, 0.375V Dropout, BIPolar, PDSO5 | 8,467 | |||
LP2981-36DBVR![]() | Texas Instruments | Fixed Positive LDO Regulator, 3.6V, 0.375V Dropout, BIPolar, PDSO5 | 8,042 | |||
| 1081368-1 | TE Connectivity | Blindmate Connector, 1 Contact(s), Female, Board Mount, Solder Terminal, Locking, Jack RoHS : Compliant | 6,413 | |||
| LV8136VGEVB | onsemi | 6,123 | ||||
| RJE3B1881362 | Broadcom Limited | 4,449 | ||||
| 10-88-1361 | Molex | Board Connector, 36 Contact(s), 2 Row(s), Male, Straight, 0.1 inch Pitch, Solder Terminal, Locking, Black Insulator, Receptacle RoHS : Compliant | 4,013 | |||
| MKT1813-610-254-G | Vishay Intertechnologies | Film Capacitor, Polyester, 250V, 5% +Tol, 5% -Tol, 10uF, Through Hole Mount | 849 | |||
| 10-88-1363 | Molex | Board Connector, 36 Contact(s), 2 Row(s), Male, Straight, 0.1 inch Pitch, Solder Terminal, Receptacle RoHS : Compliant | 765 | |||
| 10-88-1360 | Molex | Board Connector, 36 Contact(s), 2 Row(s), Male, Straight, Solder Terminal RoHS : Compliant | 699 | |||
| 10-88-1366 | Molex | Board Connector, 36 Contact(s), 2 Row(s), Male, Right Angle, 0.1 inch Pitch, Solder Terminal, Receptacle RoHS : Compliant | 621 | |||
| 10-88-1365 | Molex | Board Connector, 36 Contact(s), 2 Row(s), Male, Right Angle, 0.1 inch Pitch, Solder Terminal, Locking, Black Insulator, Receptacle RoHS : Compliant | 420 | |||
| MKT1813-610-254-R | Vishay Intertechnologies | Film Capacitor, Polyester, 250V, 5% +Tol, 5% -Tol, 10uF, Through Hole Mount | 378 | |||
| MKT1813-610-255-G | Vishay Intertechnologies | Film Capacitor, Polyester, 250V, 10% +Tol, 10% -Tol, 10uF, Through Hole Mount RoHS : Compliant | 369 |
| ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |