| データシートサーチシステム |
|
816-R68M 販売店 |
| 販売店 | 部品番号 | メーカー | 部品情報 | Price | Qty. BuyNow | |
![]() Avnet Silica | STM1816SWX7F![]() | STMicroelectronics | Processor Supervisor 288V 3V33V5V 3Pin SOT23 TR (Alt: STM1816SWX7F) RoHS : Compliant | 285,000 | ||
| NCV8163ASN180T1G | onsemi | LDO Regulator 250 mA UltraLow Dropout UltraLow Iq UltraHigh PSRR UltraLow Noise 18 V Active Discharge TSOP5 ONSSPCLDO (Alt: NCV8163ASN180T1G) RoHS : Compliant | 27,000 | |||
| BC816-25HR | Nexperia | (Alt: BC816-25HR) RoHS : Compliant | 24,000 | |||
| NCV8160AMX180TBG | onsemi | LDO Regulator 250 mA UltraLow Dropout Low Iq UltraHigh PSRR UltraLow Noise 18 V 250 mA (Alt: NCV8160AMX180TBG) RoHS : Compliant | 10,000 | |||
ATMEGA128-16AUR![]() | Microchip Technology Inc | MCU 8bit ATmega AVR RISC 128KB Flash 5V 64Pin TQFP TR (Alt: ATMEGA128-16AUR) RoHS : Compliant | 5,000 | |||
STM1816TWX7F![]() | STMicroelectronics | Voltage Supervisor ActiveLow OpenDrain 1 V to 55 V 150 ms 306 V 3 Pins SOT23 (Alt: STM1816TWX7F) RoHS : Compliant | 3,000 | |||
| AP22816BKEWT-7 | Diodes Incorporated | USB Power DistributionHigh Side Switch Single 27V to 55V 1A 5Pin TSOT25 TR (Alt: AP22816BKEWT-7) RoHS : Compliant | 3,000 | |||
| AP22816BKBWT-7 | Diodes Incorporated | (Alt: AP22816BKBWT-7) RoHS : Compliant | 3,000 | |||
| IPS8160HQ | STMicroelectronics | MOTION CONTROL AUTOMATION (Alt: IPS8160HQ) RoHS : Compliant | 2,500 | |||
SERC816![]() | STMicroelectronics | SERCOS Interface Controller 100Pin PQFP Tray (Alt: SERC816) RoHS : Compliant | 726 | |||
SERC816/TR![]() | STMicroelectronics | SERCOS Interface Controller 100Pin PQFP Tray (Alt: SERC816/TR) RoHS : Compliant | 500 | |||
ATMEGA128-16AU![]() | Microchip Technology Inc | 8 Bit MCU AVR ATmega Family ATmega128 Series Microcontrollers AVR 16 MHz 128 KB 64 Pins (Alt: ATMEGA128-16AU) RoHS : Compliant | 360 | |||
ATMEGA8-16AU![]() | Microchip Technology Inc | 8 Bit MCU AVR ATmega Family ATmega8 Series Microcontrollers AVR 16 MHz 8 KB 32 Pins TQFP (Alt: ATMEGA8-16AU) RoHS : Compliant | 250 | |||
TYN816RG![]() | STMicroelectronics | (Alt: TYN816RG) RoHS : Compliant | 150 | |||
IS61WV12816DBLL-10TLI![]() | Integrated Silicon Solution Inc | SRAM Chip Async Single 25V33V 2MBit 128K x 16 10ns 44Pin TSOPII (Alt: IS61WV12816DBLL-10TLI) RoHS : Compliant | 135 | |||
![]() DB Roberts | BSC3/8-16X1-1/2-STL | BUTTON HEAD SOCKET | Button Head Socket Cap Screw |
| 100 | |
| 17W02816B | Essentra Components | FLAT WASHER, .120 ID, .281 OD, | 0 | |||
| 38-208-18-16 | Southco | Create high-strength permanent bonding of diverse materials such as metal wood and masonry in through-hole and blind-hole applications with affordable Southco Drive Rivets. Easy installation and removal make Drive Rivets an easy choice for field wo | 0 | |||
| 47-63-181-65 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 47-63-281-64 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 47-63-581-61 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 47-63-681-60 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 47-81-604-14 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 47-81-630-15 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 47-93-181-60 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 47-61-381-61 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 47-81-604-54 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 47-81-626-14 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 47-81-630-55 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| AECH8-160 | PennEngineering (PEM) | #8 | 0 | |||
![]() Flip Electronics | NCV8160BMX280TBG | onsemi | Stock, Ship Today RoHS : Compliant |
| 124,704 | |
| NCV8161AMX250TBG | onsemi | Stock, Ship Today RoHS : Compliant |
| 53,865 | ||
| NCV8164AMTWADJTAG | onsemi | Stock, Ship Today RoHS : Compliant |
| 33,000 | ||
| NCV8160AMX180TBG | onsemi | Stock, Ship Today RoHS : Compliant |
| 31,875 | ||
| FOD8163TR2 | onsemi | Stock, Ship Today RoHS : Compliant |
| 11,655 | ||
| SURA8160T3G | onsemi | Stock, Ship Today RoHS : Compliant |
| 10,000 | ||
| ISL95816HRZ-T | Renesas Electronics Corporation | Stock, Ship Today RoHS : Compliant |
| 6,000 | ||
| NCV8164AML150TCG | onsemi | Stock, Ship Today RoHS : Compliant |
| 3,959 | ||
| NCV8164AML120TCG | onsemi | Stock, Ship Today RoHS : Compliant |
| 1,369 | ||
| LC75816WS-8722-E | onsemi | Stock, Ship Today |
| 1,200 | ||
| NCV8161AMX330TBG | onsemi | Stock, Ship Today RoHS : Compliant |
| 1,171 | ||
| NCV8164ASNADJT1G | onsemi | Stock, Ship Today RoHS : Compliant |
| 1,056 | ||
| NCV8161BMX300TBG | onsemi | Stock, Ship Today RoHS : Compliant |
| 881 | ||
| GS8162Z36BB-150I | Gsi Technology | Stock, Ship Today |
| 161 | ||
CYD18S72V18-167BGXC![]() | Cypress Semiconductor | Stock RoHS : Compliant | 125 | |||
![]() Pasternack Enterprises US | PE3W09816LF-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to TNC Male Low Loss Cable 60 Inch Length Using LMR-240 Coax, LF Solder., Radio frequency assembly N male to TNC male low loss cable 60 inch length using LMR-240 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to TNC male low loss cable 60 inch length using LMR-240 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a TNC cable connection on the other. Our low loss type N to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3W09816LF-60 can also be known as a low loss type N plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W09816LF-60 RF cable has a PE jacket of 0.240-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our type N male to TNC male cable has a maximum VSWR of 1.4:1. Type N plug to TNC plug cable assembly PE3W09816LF-60 is built with LMR-240 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/non-solder contact attachment method and a brass body with tri-metal plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W09816LF-60 can also be used in the other direction and will be a TNC male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 1,617 | |
| PE45816 | Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: 4.3-10, Connector Gender: Female, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Solder/Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 6 GHz, Interface Type 1: PE-SR402FL, Interface Type 2: PE-SR402FLJ, Interface Type 3: RG402, Interface Type 4: PE-SR402AL. 4.3-10 Female Low PIM Connector Solder Attachment for PE-SR402FL, PE-SR402FLJ, RG402, PE-SR402AL. PE45816 4.3-10 female coaxial connector has an interface type of 4.3-10 female PE-SR402FL, PE-SR402FLJ, RG402, PE-SR402AL and a 50 Ohm impedance. Pasternack 4.3-10 female connector uses shield/contact solder/solder as an attachment method. Our female 4.3-10 coaxial connector provides a minimum frequency of DC and a maximum frequency of 6 GHz. The Pasternack 4.3-10 female coaxial connector has a PTFE dielectric type. The Pasternack 4.3-10 coaxial connector has a brass body with tri-metal plating. Our PE45816 4.3-10 connector uses bronze contact and a tri-metal plating material. This 4.3-10 female coaxial RF connector is REACH compliant. This Pasternack female 4.3-10 connector will ship the same day as purchased. Our 4.3-10 female connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom 4.3-10 connector cable assemblies that will ship the same day as well. |
| 26 | ||
| PE3C1816/HS | Pasternack Enterprises | 0 | ||||
| PE3C8816/VL | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-VL, RF Cable Type: Belden 1694A-VL, RF Cable Impedance: 75 Ohm, Length, Max: 0 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable Using 75 Ohm 1694A-VL Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable using 75 Ohm 1694A-VL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable using 75 Ohm 1694A-VL coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8816/VL, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8816/VL is built with Belden 1694A-VL which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable using 75 Ohm 1694A-VL coax. | 0 | |||
| PE3W18169 | Pasternack Enterprises | Key Specifications, Connector Series 1: Double Banana, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C195, RF Cable Type: PE-C195, RF Cable Impedance: 50 Ohm. Double Banana Plug to Reverse Polarity SMA Male Right Angle Cable Using PE-C195 Coax. PE3W18169 is a Double Banana plug to reverse polarity SMA male right angle cable using PE-C195 coax. This Pasternack Double Banana plug to reverse polarity SMA male right angle cable assembly uses a 50 Ohm Double Banana for connector 1 and a 50 Ohm SMA for connector 2. Double Banana to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug Double Banana to reverse polarity male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18169 Double Banana plug to SMA reverse polarity male right angle cable assembly is constructed with PE-C195 coax. | 0 | |||
| PE3816LF-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Length: 48 inches. BNC Male Right Angle to BNC Male Right Angle Cable 48 Inch Length Using RG223 Coax, RoHS., Radio frequency assembly BNC male right angle to BNC male right angle cable 48 inch length using RG223 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male right angle to BNC male right angle cable 48 inch length using RG223 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle BNC cable connection on one end and right angle BNC cable connection on the other. Our right angle BNC to right angle BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3816LF-48, can also be known as a right angle BNC plug to right angle BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3816LF-48 is built with RG223 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with right angle BNC to right angle BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this BNC right angle male to BNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC right angle plug to BNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male right angle to BNC male right angle cable 48 inch length using RG223 coax, RoHS. |
| 0 | ||
| PE3816/HS/PH90-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. BNC Male Right Angle to BNC Male Right Angle Cable Using RG223 Coax with HeatShrink and 90 Deg. Clock in 48 Inch., Radio frequency assembly BNC male right angle to BNC male right angle cable using RG223 coax with heatshrink and 90 deg. clock in 48 inch from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC male right angle to BNC male right angle cable using RG223 coax with heatshrink and 90 deg. clock in 48 inch, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle BNC cable connection on one end and right angle BNC cable connection on the other. Our right angle BNC to right angle BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3816/HS/PH90-48, can also be known as a right angle BNC plug to right angle BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3816/HS/PH90-48 is built with RG223 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with right angle BNC to right angle BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency BNC right angle male to BNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC right angle plug to BNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male right angle to BNC male right angle cable using RG223 coax with heatshrink and 90 deg. clock in 48 inch. |
| 0 | ||
| PE3W03816/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402TN, RF Cable Type: RG402 Tinned, RF Cable Impedance: 50 Ohm. Push-On 4.3-10 Male Right Angle to 7/16 DIN Female Cable Using Tinned RG402 Coax with HeatShrink. PE3W03816/HS is a 4.3-10 male right angle to 7/16 DIN female cable using RG402 Tinned coax. This Pasternack 4.3-10 male right angle to 7/16 DIN female cable assembly uses a 50 Ohm 4.3-10 for connector 1 and a 50 Ohm 7/16 DIN for connector 2. 4.3-10 right angle to 7/16 DIN coaxial cable assembly uses 90 degree right angle coax cable connector. Our male 4.3-10 right angle to female 7/16 DIN cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W03816/HS 4.3-10 male right angle to 7/16 DIN female cable assembly is constructed with RG402 Tinned coax. | 0 | |||
| PE3W21816 | Pasternack Enterprises | Key Specifications, Connector Series 1: 3.5mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 3.5mm, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm. 3.5mm Male to 3.5mm Female Cable Using RG402 Coax. PE3W21816 is a 3.5mm male to 3.5mm female cable using RG402 coax. This Pasternack 3.5mm male to 3.5mm female cable assembly uses a 50 Ohm 3.5mm for connector 1 and a 50 Ohm 3.5mm for connector 2. Our male 3.5mm to female 3.5mm cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W21816 3.5mm male to 3.5mm female cable assembly is constructed with RG402 coax. | 0 | |||
| PE3C8163 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE3W08167 | Pasternack Enterprises | Key Specifications, Connector Series 1: 3.5mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: 3.5mm, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402TN, RF Cable Type: RG402 Tinned, RF Cable Impedance: 50 Ohm. 3.5mm Female Bulkhead to 3.5mm Female Bulkhead Cable Using Tinned RG402 Coax. PE3W08167 is a 3.5mm female bulkhead to 3.5mm female bulkhead cable using RG402 Tinned coax. This Pasternack 3.5mm female bulkhead to 3.5mm female bulkhead cable assembly uses a 50 Ohm 3.5mm for connector 1 and a 50 Ohm 3.5mm for connector 2. Our female 3.5mm bulkhead to female 3.5mm bulkhead cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W08167 3.5mm female bulkhead to 3.5mm female bulkhead cable assembly is constructed with RG402 Tinned coax. | 0 | |||
| PE3C8162 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE3C9881-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Straight Cut Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. TNC Female Bulkhead to Straight Cut Lead Cable 6 Inch Length Using PE-SR402FL Coax., Radio frequency assembly TNC female bulkhead to straight cut lead cable 6 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC female bulkhead to straight cut lead cable 6 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to straight cut lead cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a TNC bulkhead cable connection on one end and a straight cut lead cable connection on the other. Our TNC to straight cut lead cable assembly has a female gender on end 1 and a sexless on end 2. PE3C9881-6 can also be known as a TNC jack to straight cut lead sexless cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. TNC jack to straight cut lead sexless cable assembly PE3C9881-6 is built with PE-SR402FL which is a formable coax type. The Pasternack formable TNC cable assembly is manufactured with TNC to straight cut lead cable connectors, has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C9881-6 can also be used in the other direction and will be a straight cut lead sexless to TNC female bulkhead cable assembly if the opposite connectivity is required. TNC jack bulkhead to straight cut lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to straight cut lead cable assembly for quick shipment worldwide. Variations of TNC and straight cut lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to Straight Cut Lead RF cable assembly as per your requirements. |
| 0 | ||
| PE3W08166 | Pasternack Enterprises | Key Specifications, Connector Series 1: 3.5mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 3.5mm, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402TN, RF Cable Type: RG402 Tinned, RF Cable Impedance: 50 Ohm. 3.5mm Female to 3.5mm Female Cable Using Tinned RG402 Coax. PE3W08166 is a 3.5mm female to 3.5mm female cable using RG402 Tinned coax. This Pasternack 3.5mm female to 3.5mm female cable assembly uses a 50 Ohm 3.5mm for connector 1 and a 50 Ohm 3.5mm for connector 2. Our female 3.5mm to female 3.5mm cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W08166 3.5mm female to 3.5mm female cable assembly is constructed with RG402 Tinned coax. | 0 | |||
| PE3W24816 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm. SMA Female to BNC Male Cable Using PE-SR402FLJ Coax. PE3W24816 is a SMA female to BNC male cable using PE-SR402FLJ coax. This Pasternack SMA female to BNC male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BNC for connector 2. Our female SMA to male BNC cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W24816 SMA female to BNC male cable assembly is constructed with PE-SR402FLJ coax. | 0 | |||
![]() Teledyne HiRel | 5962-9581601QXA | Teledyne HiRel | TRANSCEIVER/REGISTER, 16-BIT, WITH 3-STATE INPUTS, TTL-COMPATIBLE INPUTS RoHS : Not Compliant | 0 | ||
![]() Venkel Ltd. | TFCR0402-16W-E-8162BT-1K | VENKEL LTD | Thin Film CR;0402;1/16W;�25PPM;81.6K;�0.1% RoHS : Compliant | 0 | ||
| TFCR0603-10W-C-8162CT-1K | VENKEL LTD | Thin Film CR;0603;1/10W;�50PPM;81.6K;�0.25% RoHS : Compliant | 0 | |||
| TFCR0603-10W-E-8163DT-1K | VENKEL LTD | Thin Film CR;0603;1/10W;�25PPM;816K ;�0.5% RoHS : Compliant | 0 | |||
| TFCR0603-16W-C-8162BT | VENKEL LTD | Thin Film CR;0603;1/16W;�50PPM;81.6K;�0.1% RoHS : Compliant | 0 | |||
| TFCR0603-16W-E-8160BT | VENKEL LTD | Thin Film CR;0603;1/16W;�25PPM;816R;�0.1% RoHS : Compliant | 0 | |||
| TFCR0805-10W-C-8163CT | VENKEL LTD | Thin Film CR;0805;1/10W;�50PPM;816K ;�0.25% RoHS : Compliant | 0 | |||
| TFCR0805-10W-E-8161CT | VENKEL LTD | Thin Film CR;0805;1/10W;�25PPM;8.16K;�0.25% RoHS : Compliant | 0 | |||
| TFCR0805-10W-K-8162BT | VENKEL LTD | Thin Film CR;0805;1/10W;�100PPM;81.6K;�0.1% RoHS : Compliant | 0 | |||
| TFCR0805-8W-E-8163FT | VENKEL LTD | Thin Film CR;0805;1/8W;�25PPM;816K ;�1% RoHS : Compliant | 0 | |||
| TFCR1206-4W-C-8160DT-1K | VENKEL LTD | Thin Film CR;1206;1/4W;�50PPM;816R;�0.5% RoHS : Compliant | 0 | |||
| TFCR1206-4W-C-8163BT | VENKEL LTD | Thin Film CR;1206;1/4W;�50PPM;816K ;�0.1% RoHS : Compliant | 0 | |||
| TFCR1206-4W-E-8161BT | VENKEL LTD | Thin Film CR;1206;1/4W;�25PPM;8.16K;�0.1% RoHS : Compliant | 0 | |||
| TFCR1206-8W-C-8162DT-1K | VENKEL LTD | Thin Film CR;1206;1/8W;�50PPM;81.6K;�0.5% RoHS : Compliant | 0 | |||
| TFCR1206-8W-E-8162CT | VENKEL LTD | Thin Film CR;1206;1/8W;�25PPM;81.6K;�0.25% RoHS : Compliant | 0 | |||
| TFCR1206-8W-K-8163BT | VENKEL LTD | Thin Film CR;1206;1/8W;�100PPM;816K ;�0.1% RoHS : Compliant | 0 | |||
![]() Vyrian | ZLR16300S2816 | Analog Devices Inc | Microcontroller, 8-Bit, MROM, 8MHz, CMOS, PDSO28 | 11,789 | ||
| ZLP32300S2816C00TR | Analog Devices Inc | 11,458 | ||||
| ZLR16300S2816G | Analog Devices Inc | Microcontroller, 8-Bit, MROM, 8MHz, CMOS, PDSO28 | 10,905 | |||
| ZLR32300H2816X | Analog Devices Inc | Microcontroller, 8-Bit, MROM, 8MHz, CMOS, PDSO28 | 10,751 | |||
| ZLR16300P2816C | Analog Devices Inc | Microcontroller, 8-Bit, MROM, 8MHz, CMOS, PDIP28 | 10,629 | |||
| ZLR16300S2816C | Analog Devices Inc | Microcontroller, 8-Bit, MROM, 8MHz, CMOS, PDSO28 | 10,147 | |||
| ZLR32300H2816G | Analog Devices Inc | Microcontroller, 8-Bit, MROM, 8MHz, CMOS, PDSO28 | 10,012 | |||
| ZLR16300H2816G | Analog Devices Inc | Microcontroller, 8-Bit, MROM, 8MHz, CMOS, PDSO28 | 8,666 | |||
| ZLR16300P2816 | Analog Devices Inc | Microcontroller, 8-Bit, MROM, 8MHz, CMOS, PDIP28 | 8,641 | |||
| ZLR32300H2816C | Analog Devices Inc | Microcontroller, 8-Bit, MROM, 8MHz, CMOS, PDSO28 RoHS : Unknown | 8,607 | |||
| ZLR32300H4816C | Analog Devices Inc | Microcontroller, 8-Bit, MROM, 8MHz, CMOS, PDSO48 | 8,183 | |||
| ZLR16300H2816C | Analog Devices Inc | Microcontroller, 8-Bit, MROM, 8MHz, CMOS, PDSO28 | 6,853 | |||
| ZLR16300H2816 | Analog Devices Inc | Microcontroller, 8-Bit, MROM, 8MHz, CMOS, PDSO28 | 6,115 | |||
| ZLR16300P2816G | Analog Devices Inc | Microcontroller, 8-Bit, MROM, 8MHz, CMOS, PDIP28 | 5,912 | |||
| XPS62816QWRWYRQ1 | Texas Instruments | Switching Regulator, Current-mode, 6A, 4000kHz Switching Freq-Max, PQCC9 RoHS : Not Compliant | 5,703 | |||
![]() Waytek, Inc. | 142816-91AW | General Cable Technologies Corporation | 10GA GXL Red Cross-Link Automotive Wire XLPE -51C to 125C |
| 47,985 | |
| 1816T1007-0 | Unified Wire and Cable Inc | 18GA Black Tinned Copper UL 1007/1569 CSA TR-64 300V |
| 29,000 | ||
| 1816T1015-1 | Unified Wire and Cable Inc | 18GA Brown MTW/AWM Wire Tinner Copper 600V, 1000V UL 1015/1230/1032 CSA TEW |
| 19,550 | ||
| 1816T1015-8 | Unified Wire and Cable Inc | 18GA Gray MTW/AWM Wire Tinned Copper 600V, 1000V UL 1015/1230/1032 CSA TEW |
| 17,250 | ||
| 1816T1007-1 | Unified Wire and Cable Inc | 18GA Brown Tinned Copper UL 1007/1569 CSA TR-64 300V |
| 15,650 | ||
| 1816T1015-5 | Unified Wire and Cable Inc | 18GA Green MTW/AWM Wire Tinned Copper 600V, 1000V UL 1015/1230/1032 CSA TEW |
| 12,000 | ||
| JB3816-2 | Eaton Electronics | Junction Block .87" Stud Black 250A 1 Stud Thread 3/8-16 BUSSMANN JB3816-2 |
| 11,217 | ||
| 1816T1015-7 | Unified Wire and Cable Inc | 18GA Violet MTW/AWM Wire Tinned Copper 600V, 1000V UL 1015/1230/1032 CSA TEW |
| 9,500 | ||
| 1816T1015-9 | Unified Wire and Cable Inc | 18GA White MTW/AWM Wire Tinned Copper 600V, 1000V UL 1015/1230/1032 CSA TEW |
| 9,250 | ||
| 1816T1015-4 | Unified Wire and Cable Inc | 18GA Yellow MTW/AWM Wire Tinned Copper 600V, 1000V UL 1015/1230/1032 CSA TEW |
| 6,750 | ||
| 1816T1015-6 | Unified Wire and Cable Inc | 18GA Blue MTW/AWM Wire Tinned Copper 600V, 1000V UL 1015/1230/1032 CSA TEW |
| 6,750 | ||
| 1816BTFFN-5 | Unified Wire and Cable Inc | 18GA Green TFFN/TEWN Wire Bare Copper 600V, 1000V DISC WAY |
| 3,500 | ||
| JB3816-3 | Eaton Electronics | Junction Block .87" Stud Red 250 A 1 Stud Thread 3/8-16 BUSSMANN JB3816-3 |
| 1,153 | ||
| 10816 | Hillsdale Terminal & Tool Inc | 16 Ga Wire Ferrule, Black |
| 625 | ||
| 1816T1015-0 | Unified Wire and Cable Inc | 18GA Black MTW/AWM Wire Tinned Copper 600V, 1000V UL 1015/1230/1032 CSA TEW |
| 0 | ||
![]() Win Source Electronics | LTV-816S-TA1-B | Lite-On Semiconductor Corporation | OPTOISOLATR 5KV TRANSISTOR 4SMD RoHS : Compliant |
| 990,000 | |
| LTV-816S-TA1-C | Lite-On Semiconductor Corporation | OPTOISOLATR 5KV TRANSISTOR 4SMD RoHS : Compliant |
| 600,000 | ||
| BSS816NW | Infineon Technologies AG | OptiMOS™2 Small-Signal-Transistor RoHS : Compliant |
| 60,000 | ||
| NCV8165ML330TCG | onsemi | IC REG LINEAR 3.3V 500MA 8DFNW / Linear Voltage Regulator IC Positive Fixed 1 Output 500mA 8-DFNW (3x3) RoHS : Compliant |
| 49,653 | ||
| LTV816STP-D3-TXCU | Lite-On Semiconductor Corporation |
| 44,000 | |||
| IR38165M | Infineon Technologies AG | SupIRBuck 30A Integrated Point-of-Load Regulator 5x7mm PQFN |
| 40,000 | ||
| FOD8160R2 | onsemi | OPTOISO 5KV OPEN COLLECTOR 5-SOP RoHS : Compliant |
| 25,000 | ||
| ISL81601FRZ-T | Renesas Electronics Corporation | SWITCH SYNCHRONOUS BUCK BOOST RoHS : Compliant |
| 11,330 | ||
| ISL81601FRZ-T7A | Renesas Electronics Corporation | SWITCH SYNCH BUCK-BOOST PWM / Buck-Boost Regulator Positive Output Step-Up/Step-Down DC-DC Controller IC 32-QFN (5x5) RoHS : Compliant |
| 10,980 | ||
TPS2816DBVT![]() | Texas Instruments | IC INVERTING FET DRVR SOT23-5 RoHS : Compliant |
| 6,000 | ||
LTC2641IMS8-16#TRPBF![]() | Linear Technology | IC DAC 16BIT VOUT 8-MSOP RoHS : Compliant |
| 5,140 | ||
ATMEGA128-16AU![]() | Atmel Corporation | IC MCU 8BIT 128KB FLASH 64TQFP RoHS : Compliant |
| 5,000 | ||
ATMEGA8-16AUR![]() | Microchip Technology Inc | 8-bit Atmel with 8KBytes In-System PRogrammable Flash | IC MCU 8BIT 8KB FLASH 32TQFP RoHS : Compliant |
| 5,000 | ||
ATMEGA128-16AUR![]() | Atmel Corporation | IC MCU 8BIT 128KB FLASH 64TQFP / AVR AVR® ATmega Microcontroller IC 8-Bit 16MHz 128KB (64K x 16) FLASH 64-TQFP (14x14) RoHS : Compliant |
| 4,610 | ||
| 4816P-2-103LF | Bourns Inc | RES ARRAY 15 RES 10K OHM 16SOIC RoHS : Compliant |
| 1,028 | ||
![]() Wuhan P&S | NCV8161AMX300TBG | onsemi | XDFN4 AD 3.0V LDO 450 MA, RoHS : Compliant |
| 10,000 | |
NTMS4816NR2G![]() | onsemi | Power MOSFET 30 V, 11 A, N-Channel, SO-8 RoHS : Compliant |
| 2,500 |
| ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |