 |
データシートサーチシステム |
|
|
データシートサーチシステム |
|
C208-DS00-R 販売店 |
| 販売店 | 部品番号 | メーカー | 部品情報 | Price | Qty. BuyNow | |
 Avnet Americas | DALC208SC6 | STMicroelectronics | ESD Protection Device, Array, SOT-23, 6 Pins, 1.2 V, DALC2 - Tape and Reel (Alt: DALC208SC6) RoHS : Compliant |
| 429,000 | |
| HLMP-C208-S0000 | Broadcom Limited | - Bulk (Alt: HLMP-C208-S0000) RoHS : Compliant |
| 7,000 | ||
| NK-2C2-085-125-TH00 | Molex | I/O Connector, Plug, Nano-D Subminiature Connector, 85 Contacts, Gold, Beryllium Copper, Right Angle - Tape and Reel (Alt: NK-2C2-085-125-TH00) RoHS : Not Compliant |
| 10 | ||
| BC2-08TF | Eaton Corporation | - Bulk (Alt: BC2-08TF) RoHS : Compliant |
| 0 | ||
ATS-10C-208-C3-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,XCUT, HO - Trays (Alt: ATS-10C-208-C3-R0) RoHS : Compliant |
| 0 | ||
AMPMADC-2.0800 | Abracon Corporation | MEMS Oscillator, 2.08 MHz, SMD, 2mm x 1.6mm, 25 ppm, 3.3 V, AMPM - Bulk (Alt: AMPMADC-2.0800) RoHS : Compliant | 0 | |||
| AMPMDGC-2.0800T | Abracon Corporation | MEMS Oscillator, 2.08 MHz, SMD, 2.5mm x 2mm, 50 ppm, 3.3 V, AMPM - Tape and Reel (Alt: AMPMDGC-2.0800T) RoHS : Compliant | 0 | |||
| AMPMEFC-2.0800 | Abracon Corporation | MEMS Oscillator, 2.08 MHz, SMD, 3.2mm x 2.5mm, 25 ppm, 3.3 V, AMPM - Bulk (Alt: AMPMEFC-2.0800) RoHS : Compliant | 0 | |||
| AMPMEGC-2.0800T3 | Abracon Corporation | MEMS Oscillator, 2.08 MHz, SMD, 3.2mm x 2.5mm, 50 ppm, 3.3 V, AMPM - Tape and Reel (Alt: AMPMEGC-2.0800T3) RoHS : Compliant | 0 | |||
| SP02C-20-8P(424) | Amphenol Corporation | - Bulk (Alt: SP02C-20-8P(424)) RoHS : Not Compliant |
| 0 | ||
| RNR55C2080BSRSL | Vishay Intertechnologies | - Custom Tape W/Leader (Alt: RNR55C2080BSRSL) RoHS : Not Compliant |
| 0 | ||
| RNR55C2083DSM76 | Vishay Intertechnologies | Through Hole Resistor, 208 kohm, HDN RNR Series, 100 mW, ? 0.5%, Axial Leaded, 200 V, Metal Film - Bulk (Alt: RNR55C2083DSM76) RoHS : Not Compliant |
| 0 | ||
| RNR60C2080BSM761 | Vishay Intertechnologies | Through Hole Resistor, 208 ohm, HDN RNR Series, 125 mW, ? 0.1%, Axial Leaded, 250 V, Metal Film - Bulk (Alt: RNR60C2080BSM761) RoHS : Not Compliant |
| 0 | ||
| RNR60C2084BSBSL | Vishay Intertechnologies | - Bulk (Alt: RNR60C2084BSBSL) RoHS : Not Compliant |
| 0 | ||
| PC03C-20-8P | Amphenol Corporation | - Bulk (Alt: PC03C-20-8P) RoHS : Not Compliant |
| 0 | ||
 Newark | CBR06C208B5GACAUTO | KEMET Corporation | Rf Capacitor, 0.2Pf, 50V, 125Deg C, 0603; |Kemet CBR06C208B5GACAUTO RoHS : Compliant |
| 10,190 | |
| CBR04C208B5GACAUTO | KEMET Corporation | Cap Mlcc Smd, 0.2Pf, 50V, C0G/Np0; |Kemet CBR04C208B5GACAUTO RoHS : Compliant |
| 9,880 | ||
| CBR04C208B5GACAUTO | KEMET Corporation | Cap Mlcc Smd, 0.2Pf, 50V, C0G/Np0; |Kemet CBR04C208B5GACAUTO RoHS : Compliant |
| 9,880 | ||
| CBR04C208B5GACAUTO | KEMET Corporation | Rf Capacitor, 0.2Pf, 50V, 125Deg C, 0402; |Kemet CBR04C208B5GACAUTO RoHS : Compliant |
| 9,707 | ||
CBR02C208B3GAC | KEMET Corporation | Cap, 0.2Pf, 25V, 0201; |Kemet CBR02C208B3GAC RoHS : Compliant |
| 9,460 | ||
| CBR02C208B3GAC | KEMET Corporation | Cap, 0.2Pf, 25V, 0201; |Kemet CBR02C208B3GAC RoHS : Compliant |
| 9,460 | ||
| CBR06C208B5GACAUTO | KEMET Corporation | Cap, Rf, 0.2Pf, 50V, ±0.1Pf; |Kemet CBR06C208B5GACAUTO RoHS : Compliant |
| 1,141 | ||
| CBR06C208B5GACAUTO | KEMET Corporation | Cap, Rf, 0.2Pf, 50V, ±0.1Pf; |Kemet CBR06C208B5GACAUTO RoHS : Compliant |
| 1,141 | ||
| CSEC208-1002A001C1AC | Greenconn Corp | Connector, Rcpt, 20Pos, 2Row, 1.27Mm; Available Until Stocks Are Exhausted |Greenconn CSEC208-1002A001C1AC RoHS : Compliant |
| 997 | ||
| SC2083 | Fairview Microwave Inc | Connector Accessory; |Fairview Microwave SC2083 RoHS : Compliant |
| 329 | ||
| MEC2-08-01-L-DV-WT | Samtec Inc | Card Edge Conn, Dual Side, 16Pos, Smd; |Samtec, Inc. MEC2-08-01-L-DV-WT RoHS : Compliant |
| 64 | ||
| ATS-TEC20-84-054 | Advanced Thermal Solutions Inc | Tec Module, 20X20X4.2; |Advanced Thermal Solutions ATS-TEC20-84-054 RoHS : Compliant |
| 50 | ||
| DSPIC33AK512MC208-I/PT | Microchip Technology Inc | Dsc, 200Mhz, 512Kb, Tqfp-80; |Microchip Technology DSPIC33AK512MC208-I/PT RoHS : Compliant |
| 26 | ||
| TC208 | Weller Hand Tools GmbH | Heating Element; |Weller (Apex Tool Group) TC208 RoHS : Not Compliant |
| 18 | ||
| DC2086A | Analog Devices Inc | Powered Programming Adapter, Psm Product; |Analog Devices, Inc. DC2086A RoHS : Compliant |
| 2 | ||
 RS | 831860C2.0 (83186001) | Crouzet | SWITCH SNAP ACTION SUBMINIATURE, 83180 SERIES |
| 577 | |
| C2080 | Heyco | HOLE PLUG, NYLON 66/TPE, BLACK, HOLE SIZE 1.375 IN, LTBP SERIES RoHS : Compliant |
| 498 | ||
| C20820400 | Norgren | FITTING, UNION PARALLEL Y 1/4" |
| 47 | ||
| C20820200 | Norgren | FITTING, UNION Y 5/32" |
| 10 | ||
| C20820600 | Norgren | FITTING, UNION Y 3/8 |
| 6 | ||
| TC208 | Weller Hand Tools GmbH | WELLER, HEATING ELEMENT FOR SOLDERING PENCIL ON WTCP SERIES SOLDERING STATIONS |
| 2 | ||
| JC20-8-125 | SMC Corporation of America | LIGHT WEIGHT FLOATING JOINT, M8 X 1.25 PORT SIZE, ALUMINUM, JC SERIES |
| 1 | ||
| UC208 (1741109) | FAG Bearings | RADIAL INSERT BALL BEARING ID40MM OD80MM |
| 1 | ||
| C208 | Goodyear Belts | CLASSICAL V-BELT, 1 BAND, C' SECTION |
| 0 | ||
| HC208-25 (PER.HC208-25) | PEER Bearing Company | PEER AGRICULTURE (AG) |
| 0 | ||
| UC208-25 (PER.UC208-25) | PEER Bearing Company | PEER AGRICULTURE (AG) |
| 0 | ||
| 01C208EX (COP.01 C 208 EX) | SKF Cooper | COOPER SPLIT BEARING |
| 0 | ||
| 02BC208EXAT (COP.02BC208EXAT) | SKF Cooper | COOPER BEARING AND CARTRIDGE ASSEMBLY, BORE DIA. 2-1/2 IN |
| 0 | ||
| 01EBC208GRAT (COP.01EBC208GRAT) | SKF Cooper | COOPER BEARING AND CARTRIDGE ASSEMBLY, BORE DIA. 2-1/2 IN |
| 0 | ||
| HC208-24-AP-SP1 (PER.HC208-24A-A) | PEER Bearing Company | PEER AGRICULTURE (AG) |
| 0 | ||
 STMicroelectronics | DALC208SC6 | STMicroelectronics | LOW CAPACITANCE DIODE ARRAY RoHS : Compliant |
| 10,296 | |
| DALC208SC6Y | STMicroelectronics | Automotive low capacitance diode array for ESD protection RoHS : Compliant |
| 2,614 | ||
 Bisco Industries | MS24693-C208 | North East Fasteners Corporation | 9,100 | |||
| C2082 | Heyco | RoHS : Compliant | 49 | |||
| C20883-2 | MISC. INDUSTRIAL CONNECTORS | 25 | ||||
| 17P1C2088-503 | SPRINGS | 20 | ||||
| 20097-12C-208 | Unbrako Group | 4 | ||||
| 79NC2-0832 | Greer Stop Nut Inc | 3 | ||||
| C20858-1 | MISC. INDUSTRIAL CONNECTORS | 1 | ||||
| MC-C20883-2 | MISC. INDUSTRIAL CONNECTORS | 1 | ||||
 Rochester Electronics | PN5472A2EV/C20803Y | NXP Semiconductors | RF - Other 49-BGA T/R RoHS : Compliant |
| 37,971 | |
CDC208DW | Texas Instruments | Clock Buffer 1:4 60MHz 20-SOIC Tube RoHS : Compliant |
| 19,812 | ||
| CDC208NS | Texas Instruments | Clock Buffer 1:4 60MHz 20-SOIC Tube RoHS : Compliant |
| 6,930 | ||
EPF8820ARC208-4 | Altera Corporation | FPGAs FLEX 8000 4.75V 152 I/O 208-QFP Tray RoHS : Compliant |
| 623 | ||
| EPM7512BQC208-10 | Altera Corporation | CPLD EE PLD 512 Macrocell 2.375V - 2.625V 208-QFP Tray RoHS : Not Compliant |
| 271 | ||
| EP20K200RC208-1 | Altera Corporation | FPGAs APEX-20K 106496b 1.71V 144 I/O 208-QFP RoHS : Not Compliant |
| 698 | ||
| EPF10K50SQC208-1N | Altera Corporation | FPGAs FLEX 10KE 40960b 2.375V 147 I/O 208-QFP Tray RoHS : Compliant |
| 806 | ||
| EPM9400RC208-20 | Altera Corporation | CPLD In System Programmable 400 Macrocell 4.75V - 5.25V 208-QFP Tray RoHS : Compliant |
| 80 | ||
| EP20K200RC208-2 | Altera Corporation | FPGAs APEX-20K 106496b 1.71V 144 I/O 208-QFP RoHS : Compliant |
| 88 | ||
| EPF10K100BQC208-1 | Altera Corporation | FPGAs FLEX 10K 24576b 4.75V 208-QFP RoHS : Not Compliant |
| 1,643 | ||
| EPF10K100BQC208-3 | Altera Corporation | FPGAs FLEX 10K 24576b 4.75V 208-QFP RoHS : Not Compliant |
| 5,283 | ||
| EPF10K50EQC208-3 | Altera Corporation | FPGAs FLEX 10KE 40960b 2.375V 147 I/O 208-QFP Tray RoHS : Not Compliant |
| 312 | ||
| EPM7512BQC208-5 | Altera Corporation | CPLD EE PLD 512 Macrocell 2.375V - 2.625V 208-QFP Tray RoHS : Not Compliant |
| 299 | ||
| EPF10K100EQC208-2X | Altera Corporation | FPGAs FLEX 10KE 49152b 2.375V 147 I/O 208-QFP Tray RoHS : Not Compliant |
| 300 | ||
| TMC2081KBC | Rochester Electronics LLC | TMC2081 - Digital Video Mixer, QFP128 RoHS : Not Compliant |
| 1,060 | ||
 Sager | BC2-08TF | Eaton Bussmann | Terminal Block Tools & Accessories TOP COVER-MFGR |
| 0 | |
| ATS-10C-208-C3-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,T412 |
| 0 | ||
| ATS-TEC20-84-054 | Advanced Thermal Solutions Inc | TEC MODULE, 20X20X4.2 RoHS : Compliant |
| 0 | ||
| JC2-08/J | Eaton Bussmann | Terminal Block Tools & Accessories JUMPER/CONTACT | 0 | |||
| MEC2-08-01-L-DV-NP-K-TR | Samtec Inc | Standard Card Edge Connectors 2.00 mm Mini Edge Card Connector, Vertical RoHS : Compliant |
| 0 | ||
| MEC2-08-01-L-DV-NP-WT-FR | Samtec Inc | Standard Card Edge Connectors | 0 | |||
| MEC2-08-01-L-DV-WT | Samtec Inc | Standard Card Edge Connectors 2.00 mm Mini Edge Card Connector, Vertical RoHS : Compliant |
| 0 | ||
| MEC2-08-02-L-DV-WT-TR | Samtec Inc | Standard Card Edge Connectors 2.00 mm Mini Edge Card Connector, Vertical RoHS : Compliant |
| 0 | ||
| MEC2-08-01-L-DV-NP-WT-TR | Samtec Inc | Standard Card Edge Connectors 2.00 mm Mini Edge Card Connector, Vertical RoHS : Compliant |
| 0 | ||
| ATS-20C-208-C2-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,T766 RoHS : Compliant |
| 0 | ||
| K5C/2086 | Saia-Burgess | Johnson Electric | 0 | |||
| ATS-17C-208-C3-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,T412 |
| 0 | ||
| MEC2-08-01-L-DV-FR | Samtec Inc | Standard Card Edge Connectors 2.00 mm Mini Edge Card Connector, Vertical RoHS : Compliant |
| 0 | ||
| ATS-04C-208-C2-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,T766 RoHS : Compliant |
| 0 | ||
| ATS-17C-208-C2-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,T766 |
| 0 | ||
 TME | MDC-208 | Ninigi | Connector: DIN mini; socket; female; audio video; PIN: 8; THT |
| 499 | |
| ALR-LC-208-277 | TE Connectivity | Sensor: photoelectric |
| 266 | ||
| C208-BLUE | tasker | Wire: microphone cable; 2x0.25mm2; blue; OFC; -15÷70°C; PVC |
| 103 | ||
| C.2080 | Pawbol Sp zoo | Stopper; ABS; W: 52mm; L: 219mm; for enclosures; white |
| 57 | ||
| LC 20/80-500/54 FLEXC NF H16 EXC4 | Tridonic Gmbh & Co Kg | Power supply: switching; LED; 20W; 15÷54VDC; 80÷500mA; 198÷264VAC |
| 5 | ||
| C208-RED | tasker | Wire: microphone cable; 2x0.25mm2; red; OFC; -15÷70°C; PVC |
| 0 | ||
| DF40C(2.0)-80DS-0.4V(51) | Hirose Electric Co Ltd | Connector: PCB to PCB; socket; female; data; PIN: 80; DF40; vertical RoHS : Compliant |
| 0 | ||
| MCT06030C2082DP500 | Vishay Intertechnologies | Resistor: thin film; 20.8kΩ; SMD; 0603; 0.125W; ±0.5%; MCT0603; 0 RoHS : Compliant |
| 0 | ||
| MCT06030C2083DPW00 | Vishay Intertechnologies | Resistor: thin film; 208kΩ; SMD; 0603; 0.125W; ±0.5%; MCT0603; 0; 75V RoHS : Compliant |
| 0 | ||
| MCT06030C2081DP500 | Vishay Intertechnologies | Resistor: thin film; 2.08kΩ; SMD; 0603; 0.125W; ±0.5%; MCT0603; 0 RoHS : Compliant |
| 0 | ||
| MCT06030C2082DPW00 | Vishay Intertechnologies | Resistor: thin film; 20.8kΩ; SMD; 0603; 0.125W; ±0.5%; MCT0603; 0 RoHS : Compliant |
| 0 | ||
| CIPR-GA50C2082ABAA-BAAASA | Yaskawa Controls Co Ltd | Automation module: vector inverter; 18.5/22kW; 3x230VAC; 0÷590Hz |
| 0 | ||
| CIPR-GA70C2082BBAA-BAAAAA | Yaskawa Controls Co Ltd | Automation module: vector inverter; 18.5/22kW; 3x230VAC; 0÷590Hz |
| 0 | ||
| MCT06030C2083DP500 | Vishay Intertechnologies | Resistor: thin film; 208kΩ; SMD; 0603; 0.125W; ±0.5%; MCT0603; 0; 75V RoHS : Compliant |
| 0 | ||
| IIC208 | ifm efector inc | Sensor: inductive |
| 0 | ||
 Ameya Holding Limited | DALC208SC6 | STMicroelectronics | DALC208 Series 4 Channel Bi-Directional Diode Array SMT - SOT-23-6 RoHS : Compliant | 23 | ||
| MTC20C2085S1TC56BD1 | Micron Technology Inc | 20 | ||||
 ComSIT USA | EPF6016AQC2082N | Altera Corporation | FPGAs FLEX 6000A 3V 171 I/O 208-QFP RoHS : Compliant | 36 | ||
| EPF10K100BQC2083 | Altera Corporation | EMBEDDED PROGRAMMABLE LOGIC DEVICE Loadable PLD, 14.5ns, CMOS, PQFP208 RoHS : Not Compliant | 17 | |||
| EPF10K50EQC2083 | Altera Corporation | EMBEDDED PROGRAMMABLE LOGIC DEVICE Loadable PLD, 0.8ns, CMOS, PQFP208 RoHS : Not Compliant | 16 | |||
| EP20K60EQC2082N | Altera Corporation | PROGRAMMABLE LOGIC DEVICE Loadable PLD, 2.41ns, CMOS, PQFP208 RoHS : Compliant | 14 | |||
| EP20K200RC2083 | Altera Corporation | PROGRAMMABLE LOGIC DEVICE Loadable PLD, 3.6ns, CMOS, PQFP208 RoHS : Not Compliant | 12 | |||
| EP20K30EQC2081X | Altera Corporation | PROGRAMMABLE LOGIC DEVICE Loadable PLD, 1.91ns, CMOS, PQFP208 RoHS : Not Compliant | 11 | |||
| EP20K160EQC2082X | Altera Corporation | PROGRAMMABLE LOGIC DEVICE Loadable PLD, 1.93ns, CMOS, PQFP208 RoHS : Not Compliant | 9 | |||
| EPF10K50SQC2081 | Altera Corporation | EMBEDDED PROGRAMMABLE LOGIC DEVICE Loadable PLD, 0.3ns, CMOS, PQFP208 RoHS : Not Compliant | 8 | |||
| EPF10K30RC2083N | Altera Corporation | EMBEDDED PROGRAMMABLE LOGIC DEVICE FAMILY Loadable PLD, 0.6ns, CMOS, PQFP208 RoHS : Compliant | 7 | |||
| EPF10K10AQC2083 | Altera Corporation | EMBEDDED PROGRAMMABLE LOGIC DEVICE FAMILY Loadable PLD, 0.8ns, CMOS, PQFP208 RoHS : Not Compliant | 3 | |||
| EPF10K30AQC2082N | Altera Corporation | EMBEDDED PROGRAMMABLE LOGIC DEVICE FAMILY Loadable PLD, 0.7ns, CMOS, PQFP208 RoHS : Compliant | 3 | |||
| EPM9400RC20815 | Altera Corporation | PROGRAMMABLE LOGIC DEVICE EE PLD, 16.2ns, 400-Cell, CMOS, PQFP208 RoHS : Not Compliant | 1 | |||
| EPF10K10QC2083N | Altera Corporation | EMBEDDED PROGRAMMABLE LOGIC DEVICE FAMILY Loadable PLD, 0.5ns, CMOS, PQFP208 RoHS : Compliant | 1 | |||
| EP1K30QC2082N | Altera Corporation | PROGRAMMABLE LOGIC DEVICE Loadable PLD, 0.4ns, CMOS, PQFP208 RoHS : Compliant | 1 | |||
| EPM9320RC20815 | Altera Corporation | PROGRAMMABLE LOGIC DEVICE EE PLD, 16ns, 320-Cell, CMOS, PQFP208 RoHS : Not Compliant | 1 | |||
 Interstate Connecting Components | SP02C-20-8P(424) | Amphenol Aerospace | RECEPT 91-184220-08P | 0 | ||
| PC03C-20-8P | Amphenol Aerospace | RECEPT 10-152320-08P | 0 | |||
| SP02C-20-8P | Amphenol Aerospace | RECEPT 72-314552-08P | 0 | |||
| PC02C-20-8P | Amphenol Aerospace | RECEPT 10-152220-08P | 0 | |||
| PT00C-20-8S(027) | Amphenol Industrial Operations | RECEPTACLE | 0 | |||
| PT07C-20-8P(027) | Amphenol Industrial Operations | RECEPTACLE | 0 | |||
| MS3102C20-8P | Amphenol Industrial Operations | RECEPTACLE | 0 | |||
| PT07C-20-8P(025) | Amphenol Industrial Operations | RECEPTACLE | 0 | |||
| PC03C-20-8S | Amphenol Aerospace | RECEPT 10-152320-08S | 0 | |||
| PT03C-20-8S(025) | Amphenol Industrial Operations | RECEPTACLE | 0 | |||
| 801-069-26M10-26BC208 | Glenair Inc | 0 | ||||
| 801-069-26M16-55PC208 | Glenair Inc | RoHS : Compliant | 0 | |||
| 801-069-26NF16-55SC208 | Glenair Inc | RoHS : Not Compliant | 0 | |||
| 804-066-06NF10-26SC208 | Glenair Inc | RoHS : Not Compliant | 0 | |||
| SP02C-20-8P(013) | Amphenol Aerospace | RECEPT 87-314552-08P | 0 | |||
 PEI Genesis | CB6LC20-8SS | ITT Interconnect Solutions |
| 0 | ||
| CB6TC20-8SC | ITT Interconnect Solutions |
| 0 | |||
| CB1LC20-8PS | ITT Interconnect Solutions |
| 0 | |||
| CB6FC20-8SS | ITT Interconnect Solutions |
| 0 | |||
| CB6LC20-8SC | ITT Interconnect Solutions |
| 0 | |||
 Rutronik | ESDALC208 | Diotec Semiconductor AG | ESD ARRAY 6A 9V SOT-26 RoHS : Compliant |
| 24,000 | |
 Chip 1 Exchange | LFL152G45TC4C208 | Murata Manufacturing Co Ltd | INSTOCK | 24,411 | ||
| EP20K160EQC208-3 | Altera Corporation | INSTOCK RoHS : Not Compliant | 4,483 | |||
| DALC208SC6 | STMicroelectronics | INSTOCK RoHS : Compliant | 3,242 | |||
| DALC208SC6 | Sangdest Microelectronics (Nanjing) Co Ltd | INSTOCK | 2,041 | |||
| EPM7256AQC208-7 | Altera Corporation | INSTOCK RoHS : Not Compliant | 233 | |||
| EPM3256AQC208-10 | INSTOCK | 168 | ||||
| EPF10K10AQC208-3 | Altera Corporation | INSTOCK RoHS : Not Compliant | 109 | |||
| EPF6016AQC2083 | INSTOCK | 36 | ||||
| EPM3256AQC208-7N | Altera Corporation | INSTOCK RoHS : Compliant | 30 | |||
| DC208 | INSTOCK | 15 | ||||
| EPF10K20RC2084 | Altera Corporation | INSTOCK | 11 | |||
| 42C2088 | IBM | INSTOCK | 10 | |||
| CDC208DW | Texas Instruments | INSTOCK RoHS : Compliant | 5 | |||
| EPF10K100EQC2081 | INSTOCK | 2 | ||||
| EPM3256AQC208-7 | INSTOCK | 1 | ||||
 Avnet Abacus | AMPMADC-2.0800 | Abracon Corporation | (Alt: AMPMADC-2.0800) RoHS : Compliant | 0 | ||
| AMPMEFC-2.0800 | Abracon Corporation | (Alt: AMPMEFC-2.0800) RoHS : Compliant | 0 | |||
| CBR02C208B3GAC | KEMET Corporation | SMD Multilayer Ceramic Capacitor 02 pF 25 V 0201 0603 Metric 01pF C0G NP0 - Tape and Reel (Alt: CBR02C208B3GAC) RoHS : Compliant | 0 | |||
| AMPMDGC-2.0800T | Abracon Corporation | (Alt: AMPMDGC-2.0800T) RoHS : Compliant | 0 | |||
| AMPMEGC-2.0800T3 | Abracon Corporation | (Alt: AMPMEGC-2.0800T3) RoHS : Compliant | 0 | |||
| AMPMGFC-2.0800T3 | Abracon Corporation | (Alt: AMPMGFC-2.0800T3) RoHS : Compliant | 0 | |||
| AMPMDDC-2.0800T3 | Abracon Corporation | (Alt: AMPMDDC-2.0800T3) RoHS : Compliant | 0 | |||
| AMPMEFC-2.0800T3 | Abracon Corporation | (Alt: AMPMEFC-2.0800T3) RoHS : Compliant | 0 | |||
| MMA02040C2081DB300 | Vishay Intertechnologies | - Tape and Reel (Alt: MMA02040C2081DB300) RoHS : Compliant | 0 | |||
| MEC2-08-01-L-DV-WT | Samtec Inc | Card Edge Connector Dual Side 157 mm 16 Contacts Surface Mount Straight (Alt: MEC2-08-01-L-DV-WT) RoHS : Compliant | 0 | |||
| CBR06C208B5GACAUTO | KEMET Corporation | (Alt: CBR06C208B5GACAUTO) RoHS : Compliant | 0 | |||
| MEC2-08-01-L-DV-FR | Samtec Inc | (Alt: MEC2-08-01-L-DV-FR) RoHS : Compliant | 0 | |||
| GPHC208-0354A010B1BC | Greenconn Corp | header 2x3pos pitch 254mm SMD (Alt: GPHC208-0354A010B1BC) RoHS : Compliant | 0 | |||
| MEC2-08-02-L-DV-WT-TR | Samtec Inc | (Alt: MEC2-08-02-L-DV-WT-TR) RoHS : Compliant | 0 | |||
| MEC2-08-01-L-DV-NP-K-TR | Samtec Inc | Conn Card Edge F 16 POS 2mm Solder ST SMD TR (Alt: MEC2-08-01-L-DV-NP-K-TR) RoHS : Compliant | 0 | |||
Avnet Asia | GPEC208-0802A110C1ZF | Greenconn Corp | GCTGPEC208-0802A110C1ZF CONNECTOR 1.27 P (Alt: GPEC208-0802A110C1ZF) RoHS : Compliant | 0 | ||
| CSEC208-0802A001C1AD | Greenconn Corp | Conn Socket Strip RCP 16 POS 1.27mm Solder RA SMD (Alt: CSEC208-0802A001C1AD) RoHS : Compliant | 0 | |||
| CSEC208-0302A004C1AH | Greenconn Corp | GCTCSEC208-0302A004C1AH 1.27MM PITCH DAU (Alt: CSEC208-0302A004C1AH) RoHS : Compliant | 0 | |||
| PI6C20800SAEX | Diodes Incorporated | Clock Buffer, PCIe Fanout, 95 MHz to 400 MHz, 8 Outputs, 3.135 V to 3.465 V, 48 Pins, TSSOP (Alt: PI6C20800SAEX) RoHS : Compliant | 0 | |||
 Avnet Silica | DALC208SC6Y | STMicroelectronics | ESD Protection Device SOT23 6 Pins (Alt: DALC208SC6Y) RoHS : Compliant | 21,000 | ||
| PI6C20800SVEX | Diodes Incorporated | Clock Buffer LowOutput Skew 95 MHz to 400 MHz 8 Outputs 3135 V to 3465 V 48 Pins SSOP (Alt: PI6C20800SVEX) RoHS : Compliant | 0 | |||
| PI6C20800BAEX | Diodes Incorporated | Clock Buffer PCIe Fanout 95 MHz to 400 MHz 8 Outputs 3135 V to 3465 V 48 Pins TSSOP (Alt: PI6C20800BAEX) RoHS : Compliant | 0 | |||
| PI6C20800SAEX | Diodes Incorporated | Clock Buffer PCIe Fanout 95 MHz to 400 MHz 8 Outputs 3135 V to 3465 V 48 Pins TSSOP (Alt: PI6C20800SAEX) RoHS : Compliant | 0 | |||
| PI6C20800SIAEX | Diodes Incorporated | Clock Buffer PCIe Fanout 95 MHz to 400 MHz 8 Outputs 3135 V to 3465 V 48 Pins TSSOP (Alt: PI6C20800SIAEX) RoHS : Compliant | 0 | |||
| PI6C20800BIAEX | Diodes Incorporated | Clock Buffer PCIe Fanout 95 MHz to 400 MHz 8 Outputs 3135 V to 3465 V 48 Pins TSSOP (Alt: PI6C20800BIAEX) RoHS : Compliant | 0 | |||
| DSPIC33AK512MC208-I/PT | Microchip Technology Inc | 200MHz 512KB Flash FuSaCompliant HSAnalog HSPWMs Touch (Alt: DSPIC33AK512MC208-I/PT) RoHS : Compliant | 0 | |||
| DSPIC33AK512MC208-E/PT | Microchip Technology Inc | 200 MHZ 512KB FLASH FUSACOMPLIANT HSANALOG HSPWMS TOUCH (Alt: DSPIC33AK512MC208-E/PT) RoHS : Compliant | 0 | |||
 Component Electronics, Inc | EPF6016AQC208-1 | Altera Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 68 | |
| DALC208SC6 | STMicroelectronics | IN STOCK SHIP TODAY RoHS : Compliant |
| 30 | ||
PI6C20800VE | Pericom Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 30 | ||
| EPF10K10QC208-4 | Altera Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 18 | ||
| EPM3256AQC208-7 | Altera Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 10 | ||
| EPF6016AQC208-3 | Altera Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 5 | ||
| EPF10K20RC208-3 | Altera Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 3 | ||
| EP1K30QC208-2 | Altera Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 3 | ||
| EPF10K30AQC208-3 | Altera Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 2 | ||
| EPF10K40RC208-4 | Altera Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant | 2 | |||
| EPF81188AQC208-2 | Altera Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 2 | ||
| EPF10K10QC208-3 | Altera Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 2 | ||
| EPF6024AQC208-2 | Altera Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 2 | ||
| EP1K30QC208-3 | Altera Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 1 | ||
| MC208B | LOCUS | IN STOCK SHIP TODAY | 1 | |||
 DB Roberts | CM-C208 | Southco | 0 | |||
| C2082JJ | Heyco | LTBP 1500-250 LT GRAY 00050047 | 0 | |||
| AE803C2083 | PennEngineering (PEM) | GUN | 0 | |||
| AE803C2083R | PennEngineering (PEM) | REPAIR | 0 | |||
| C2080-P | Heyco | LTBP 1375-250 BLACK 10PK | 0 | |||
| C2082 | Heyco | LTBP 1500-250 BLACK RoHS : Compliant | 0 | |||
| C20-832 | PennEngineering (PEM) | 0 | ||||
| C2080 | Heyco | LTBP 1375-250 BLACK RoHS : Compliant | 0 | |||
| C2082-P | Heyco | LTBP 1500-250 BLACK 10PK | 0 | |||
 EBV Elektronik | DALC208SC6 | STMicroelectronics | ESD Protection Device Array SOT23 6 Pins 12 V DALC2 (Alt: DALC208SC6) RoHS : Compliant | 342,000 | ||
| DALC208SC6 | STMicroelectronics | ESD Protection Device Array SOT23 6 Pins 12 V DALC2 (Alt: DALC208SC6) RoHS : Compliant | 0 | |||
| DALC208SC6Y | STMicroelectronics | ESD Protection Device SOT23 6 Pins (Alt: DALC208SC6Y) RoHS : Compliant | 0 | |||
| HLMP-C208-S0000 | Broadcom Limited | (Alt: HLMP-C208-S0000) RoHS : Compliant | 0 | |||
| NPC1002A2EV/C208BY | NXP Semiconductors | PHANPC1002A2EVC208BY NFC CONTROLLER (Alt: NPC1002A2EV/C208BY) RoHS : Compliant | 0 | |||
| NPC1002A2EV/C20803 | NXP Semiconductors | Identification Authentication Security ICs (Alt: NPC1002A2EV/C20803) RoHS : Compliant | 0 | |||
| XC208096F66LACKXUMA1 | Infineon Technologies AG | MCU 16Bit XC2000 C166 RISC 768KB Flash 144Pin LQFP TR (Alt: SP000919146) RoHS : Compliant | 0 | |||
| DSPIC33AK512MC208-I/PT | Microchip Technology Inc | 200MHz 512KB Flash FuSaCompliant HSAnalog HSPWMs Touch (Alt: DSPIC33AK512MC208-I/PT) RoHS : Compliant | 0 | |||
 Flip Electronics | EPM3256AQC208-7 | Altera Corporation | Stock, Ship Today RoHS : Not Compliant |
| 4,590 | |
| EPM3256AQC208-10 | Altera Corporation | Stock RoHS : Not Compliant | 4,590 | |||
| EPM3256AQC208-10N | Altera Corporation | Stock RoHS : Compliant | 4,590 | |||
 Master Electronics | TC208 | Weller Hand Tools GmbH | Heating Element For Soldering Pencil On Wtcp Series Soldering Stations RoHS : Compliant |
| 2 | |
| MIC2085-JYQS | Microchip Technology Inc | Single-Channel Low Voltage Hot Swap Controller VFAST = 100 RoHS : Compliant |
| 0 | ||
| MEC2-08-01-L-DV-NP-K-TR | Samtec Inc | 2.00 mm Micro Edge Card Socket RoHS : Compliant |
| 0 | ||
| MEC2-08-01-L-DV-WT | Samtec Inc | 2.00 mm Mini Edge Card Connector Vertical RoHS : Compliant |
| 0 | ||
| MEC2-08-02-L-DV-WT-TR | Samtec Inc | 2.00 mm Mini Edge Card Connector Vertical RoHS : Compliant |
| 0 | ||
| MEC2-08-01-L-DV-NP-WT-TR | Samtec Inc | 2.00 mm Micro Edge Card Socket RoHS : Compliant |
| 0 | ||
| MEC2-08-01-L-DV-FR | Samtec Inc | 2.00 MM MINI EDGE CARD CO RoHS : Compliant |
| 0 | ||
| 3SBC2082A2 | TE Connectivity | Military/Aerospace High Performance Relays MOQ Reduction RoHS : Not Compliant |
| 0 | ||
| B07D932BC2-0863 | TE Connectivity | B07D932BC2-0863=07 10AMP RELAY MOQ Reduction RoHS : Not Compliant |
| 0 | ||
| DSPIC33AK256MC208-E/PT | Microchip Technology Inc | 200MHz 256KB Flash FuSa-Compliant HS-Analog HS-PWMs Tou RoHS : Compliant |
| 0 | ||
| HL-C208CE-MK | Panasonic Electronic Components | MEASURING RANGE: 85 20MM / RoHS : Compliant |
| 0 | ||
| ECM-B3M-C20810SB1 | Delta Power | RoHS : Compliant |
| 0 | ||
| MEC2-08-01-L-DV-K-FR | Samtec Inc | 2.00 MM MINI EDGE CARD CO RoHS : Compliant |
| 0 | ||
| MEC2-08-01-L-DV-NP-WT | Samtec Inc | 2.00 mm Micro Edge Card Socket RoHS : Compliant |
| 0 | ||
| DSPIC33AK512MC208-I/PT | Microchip Technology Inc | 200MHz 512KB Flash FuSa-Compliant HS-Analog HS-PWMs Tou RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE3C2080/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. N Male to N Male Low Loss Cable Using LMR-400-UF Coax With Times Microwave Components with HeatShrink., Radio frequency assembly N male to N male low loss cable using LMR-400-UF coax with Times Microwave components with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable using LMR-400-UF coax with Times Microwave components with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and type N cable connection on the other. Our low loss N type to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C2080/HS can also be known as a low loss type N plug to N type plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE3C2080/HS is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable using LMR-400-UF coax with Times Microwave components with heatshrink. | 4,290 | ||
| PE3C2080 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. N Male to N Male Low Loss Cable Using LMR-400-UF Coax with Times Microwave Components., Radio frequency assembly N male to N male low loss cable using LMR-400-UF coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable using LMR-400-UF coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C2080 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2080 RF cable has a TPE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C2080 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 3,310 | |||
| PE3C2080LF-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to N Male Low Loss Cable 60 Inch Length Using LMR-400-UF Coax with Times Microwave Components, LF Solder., Radio frequency assembly N male to N male low loss cable 60 inch length using LMR-400-UF coax with Times Microwave components, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 60 inch length using LMR-400-UF coax with Times Microwave components, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low loss N type to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C2080LF-60 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to type N plug cable assembly PE3C2080LF-60 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency type N male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 60 inch length using LMR-400-UF coax with Times Microwave components, LF solder. |
| 850 | ||
| PE3C2080LF-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 120 inches. N Male to N Male Low Loss Cable 120 Inch Length Using LMR-400-UF Coax with Times Microwave Components, LF Solder., Radio frequency assembly N male to N male low loss cable 120 inch length using LMR-400-UF coax with Times Microwave components, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 120 inch length using LMR-400-UF coax with Times Microwave components, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low loss N type to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C2080LF-120 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to type N plug cable assembly PE3C2080LF-120 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency type N male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 120 inch length using LMR-400-UF coax with Times Microwave components, LF solder. |
| 850 | ||
| PE3C2080/HS-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 120 inches. N Male to N Male Low Loss Cable 120 Inch Length Using LMR-400-UF Coax With Times Microwave Components with HeatShrink., Radio frequency assembly N male to N male low loss cable 120 inch length using LMR-400-UF coax with Times Microwave components with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 120 inch length using LMR-400-UF coax with Times Microwave components with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and type N cable connection on the other. Our low loss type N to N type cable assemblies have a male gender on end 1 and male on end 2. PE3C2080/HS-120 can also be known as a low loss type N plug to N type plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE3C2080/HS-120 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 120 inch length using LMR-400-UF coax with Times Microwave components with heatshrink. |
| 850 | ||
| PE3C2080LF-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Male to N Male Low Loss Cable 12 Inch Length Using LMR-400-UF Coax with Times Microwave Components, LF Solder., Radio frequency assembly N male to N male low loss cable 12 inch length using LMR-400-UF coax with Times Microwave components, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 12 inch length using LMR-400-UF coax with Times Microwave components, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and N type cable connection on the other. Our low loss type N to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C2080LF-12 can also be known as a low loss N type plug to type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to N type plug cable assembly PE3C2080LF-12 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency type N male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss N type plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 12 inch length using LMR-400-UF coax with Times Microwave components, LF solder. |
| 850 | ||
| PE3C2080-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Male to N Male Low Loss Cable 36 Inch Length Using LMR-400-UF Coax with Times Microwave Components., Radio frequency assembly N male to N male low loss cable 36 inch length using LMR-400-UF coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 36 inch length using LMR-400-UF coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C2080-36 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2080-36 RF cable has a TPE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C2080-36 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 777 | ||
| PE3C2080-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. N Male to N Male Low Loss Cable 300 Inch Length Using LMR-400-UF Coax with Times Microwave Components., Radio frequency assembly N male to N male low loss cable 300 inch length using LMR-400-UF coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 300 inch length using LMR-400-UF coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C2080-300 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2080-300 RF cable has a TPE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C2080-300 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 202 | ||
| PE3C2082-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Male to SMA Male Right Angle Low Loss Cable 48 Inch Length Using LMR-100 Coax., Radio frequency assembly SMA male to SMA male right angle low loss cable 48 inch length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA male right angle low loss cable 48 inch length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and right angle a SMA cable connection on the other. Our low loss a SMA to right angle a SMA cable assembly has male gender on end 1 and male on end 2. PE3C2082-48 can also be known as a low loss SMA plug to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2082-48 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SMA plug to SMA plug cable assembly PE3C2082-48 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C2082-48 can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C2089 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-600, RF Cable Type: LMR-600, RF Cable Impedance: 50 Ohm. N Male to N Female Cable Using LMR-600 Coax., Radio frequency assembly N male to N female cable using LMR-600 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N female cable using LMR-600 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with N type cable connection on one end and type N cable connection on the other. Our N type to type N cable assemblies have a male gender on end 1 and female on end 2. This N type to type N cable is a male to female coax assembly, PE3C2089, can also be known as a type N plug to type N jack cable assembly and will be shipped same-day as it is purchased. Type N plug to N type jack cable assembly PE3C2089 is built with LMR-600 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2089 can also be used in the other direction and will be type N female to N type male cable assembly if the opposite connectivity is required. Type N plug to N type jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N female cable using LMR-600 coax. | 0 | |||
| PE3C2082LF/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Right Angle Low Loss Cable Using LMR-100 Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male to SMA male right angle low loss cable using LMR-100 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA male right angle low loss cable using LMR-100 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and right angle a SMA cable connection on the other. Our low loss a SMA to right angle a SMA cable assembly has male gender on end 1 and male on end 2. PE3C2082LF/HS can also be known as a low loss SMA plug to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2082LF/HS RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SMA plug to SMA plug cable assembly PE3C2082LF/HS is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C2082LF/HS can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 0 | |||
| PE3C2082LF/HS-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. SMA Male to SMA Male Right Angle Low Loss Cable 100 cm Length Using LMR-100 Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male to SMA male right angle low loss cable 100 cm length using LMR-100 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA male right angle low loss cable 100 cm length using LMR-100 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and right angle a SMA cable connection on the other. Our low loss a SMA to right angle a SMA cable assembly has male gender on end 1 and male on end 2. PE3C2082LF/HS-100CM can also be known as a low loss SMA plug to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2082LF/HS-100CM RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SMA plug to SMA plug cable assembly PE3C2082LF/HS-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C2082LF/HS-100CM can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C2080/HS2 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. N Male to N Male Cable Using LMR-400-UF Coax with Double HeatShrink., Radio frequency assembly N male to N male cable using LMR-400-UF coax with double heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N male cable using LMR-400-UF coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our type N to N type cable assemblies have a male gender on end 1 and male on end 2. This type N to type N cable is a male to male coax assembly, PE3C2080/HS2, can also be known as a N type plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to type N plug cable assembly PE3C2080/HS2 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Type N plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male cable using LMR-400-UF coax with double heatshrink. | 0 | |||
| PE3C2082LF/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to SMA Male Right Angle Low Loss Cable 36 Inch Length Using LMR-100 Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male to SMA male right angle low loss cable 36 inch length using LMR-100 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA male right angle low loss cable 36 inch length using LMR-100 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and right angle a SMA cable connection on the other. Our low loss a SMA to right angle a SMA cable assembly has male gender on end 1 and male on end 2. PE3C2082LF/HS-36 can also be known as a low loss SMA plug to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2082LF/HS-36 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SMA plug to SMA plug cable assembly PE3C2082LF/HS-36 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C2082LF/HS-36 can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C2084/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to BNC Female Bulkhead Cable Using LMR-100 Coax with HeatShrink. PE3C2084/HS is a SMA male right angle to BNC female bulkhead cable using LMR-100A coax. This Pasternack SMA male right angle to BNC female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BNC for connector 2. SMA right angle to BNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to female BNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C2084/HS SMA male right angle to BNC female bulkhead cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
 Venkel Ltd. | TFCR0402-16W-C-2082FT-1K | VENKEL LTD | Thin Film CR;0402;1/16W;�50PPM;20.8K;�1% RoHS : Compliant | 0 | ||
| TFCR0603-10W-C-2080FT | VENKEL LTD | Thin Film CR;0603;1/10W;�50PPM;208R;�1% RoHS : Compliant | 0 | |||
| TFCR0805-8W-C-2083CT-1K | VENKEL LTD | Thin Film CR;0805;1/8W;�50PPM;208K ;�0.25% RoHS : Compliant | 0 | |||
| TFCR0805-8W-C-2083DT | VENKEL LTD | Thin Film CR;0805;1/8W;�50PPM;208K ;�0.5% RoHS : Compliant | 0 | |||
| TFCR1206-8W-C-2080BT-1K | VENKEL LTD | Thin Film CR;1206;1/8W;�50PPM;208R;�0.1% RoHS : Compliant | 0 | |||
| TFCR1210-4W-C-2081FT-1K | VENKEL LTD | Thin Film CR;1210;1/4W;�50PPM;2.08K;�1% RoHS : Compliant | 0 | |||
| TFCR2010-4W-C-2080CT | VENKEL LTD | Thin Film CR;2010;1/4W;�50PPM;208R;�0.25% RoHS : Compliant | 0 | |||
| TFCR2512-2W-C-2080CT-1K | VENKEL LTD | Thin Film CR;2512;1/2W;�50PPM;208R;�0.25% RoHS : Compliant | 0 | |||
| TFCR2512-2W-C-2082BT | VENKEL LTD | Thin Film CR;2512;1/2W;�50PPM;20.8K;�0.1% RoHS : Compliant | 0 | |||
| TFCR0603-10W-C-2082BT-1K | VENKEL LTD | Thin Film CR;0603;1/10W;�50PPM;20.8K;�0.1% RoHS : Compliant | 0 | |||
| TFCR0603-16W-C-2081BT | VENKEL LTD | Thin Film CR;0603;1/16W;�50PPM;2.08K;�0.1% RoHS : Compliant | 0 | |||
| TFCR0805-10W-C-2082CT | VENKEL LTD | Thin Film CR;0805;1/10W;�50PPM;20.8K;�0.25% RoHS : Compliant | 0 | |||
| TFCR1206-4W-C-2080CT-1K | VENKEL LTD | Thin Film CR;1206;1/4W;�50PPM;208R;�0.25% RoHS : Compliant | 0 | |||
| TFCR1206-4W-C-2080FT | VENKEL LTD | Thin Film CR;1206;1/4W;�50PPM;208R;�1% RoHS : Compliant | 0 | |||
| TFCR1206-8W-C-2082CT-1K | VENKEL LTD | Thin Film CR;1206;1/8W;�50PPM;20.8K;�0.25% RoHS : Compliant | 0 | |||
 Vyrian | MT5C1601EC-20883C | Micron Technology Inc | Standard SRAM, 16KX1, 20ns, CMOS, CQCC20 RoHS : Not Compliant | 7,056 | ||
| MIC2085-JYQS | Microchip Technology Inc | Power Supply Support Circuit, Adjustable, 1 Channel, +0.095, PDSO16 RoHS : Compliant | 6,369 | |||
| MTC16C2085S1UC56BA1 | Micron Technology Inc | DDR5 DRAM Module, 4GX64, CMOS | 5,730 | |||
| MT4264EC-20883C | Micron Technology Inc | 5,607 | ||||
| MT5C2564C20/883C | Micron Technology Inc | Standard SRAM, 64KX4, 20ns, CMOS, CDIP24 RoHS : Not Compliant | 5,250 | |||
| EP20K100ERC208-2 | Intel / Altera | Loadable PLD, CMOS, PQFP208 | 4,126 | |||
| EP1K10QC208-1X | Intel / Altera | Field Programmable Gate Array, 576-Cell, CMOS, PQFP208 | 3,973 | |||
| EPF8820ARC208-4N | Intel / Altera | Loadable PLD, CMOS, PQFP208 | 3,367 | |||
| EP1K10QC208-1 | Intel / Altera | Loadable PLD, 0.4ns, CMOS, PQFP208 | 3,366 | |||
| EPM7256ERC208-15C | Intel / Altera | EE PLD, 15ns, CMOS, PQFP208 | 3,314 | |||
| EPF8820RC208-3 | Intel / Altera | Loadable PLD, CMOS, PQFP208 | 3,293 | |||
| EP1K100QC208-3F | Intel / Altera | Field Programmable Gate Array, 4992-Cell, CMOS, PQFP208 | 3,291 | |||
| EPM7256AQC208-6 | Intel / Altera | EE PLD, 6ns, 256-Cell, CMOS, PQFP208 | 2,787 | |||
| EP20K100QC208-2V | Intel / Altera | Loadable PLD, 0.4ns, CMOS, PQFP208 | 2,175 | |||
| EPF81188AQC208-3 | Intel Corporation | Loadable PLD, CMOS, PQFP208 RoHS : Not Compliant | 1,708 | |||
 Waytek, Inc. | C2082 | Heyco | Heyco C2082 liquid-tight hole plug is a sealing panel plug sized for a 1.500" opening to close unused liquid-tight conduit entry holes. Its sealing design supports secure retention, moisture resistance, and cleaner enclosure protection in electrical and equipment applications. RoHS : Compliant |
| 1,272 | |
| C2080 | Heyco | Heyco C2080 liquid-tight hole plug is a sealing panel plug sized for a 1.375" opening to close unused liquid-tight conduit entry holes. Its sealing design supports secure retention, moisture resistance, and cleaner enclosure protection in electrical and equipment applications. RoHS : Compliant |
| 0 |
| ALLDATASHEETはお客様のビジネスに役立ちますか？ [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Japanese ▼ 
English
Chinese
German
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand