 |
データシートサーチシステム |
|
|
データシートサーチシステム |
|
L102-04SC-R 販売店 |
| 販売店 | 部品番号 | メーカー | 部品情報 | Price | Qty. BuyNow | |
 GLYN GmbH & Co. KG | NL10276BC20-18 | Tianma Micro-electronics Co | TFT 10.40", 1024x768, 400cd, LVDS | 1 | ||
 NexGen Digital | JA1333L-102 | Foxconn | RoHS : Unknown | 845 | ||
| SEAF-20-06.5-L-10-2-A-K-R | Samtec Inc | 130 | ||||
| SEAF-20-06.5-L-10-2-A-KTR | Samtec Inc | 30 | ||||
 Rutronik | TSM4YL102KR05 | Vishay Intertechnologies | TSM4 1K 10% LIN 0,25W RoHS : Compliant |
| 2,000 | |
 Braemac Americas-Symmetry | HAL102TQ-I | TDK Micronas GmbH | HAL102TQ-INEOL - Possible Repl = HAL1502 |
| 1 | |
| AMEOFL10-24S480LPZ | Aimtec | RoHS : Compliant |
| 0 | ||
AMEL10-24SAZ | Aimtec | RoHS : Compliant |
| 0 | ||
| HX15-8-LR-GIL-102 | Digi International Inc | HX15 Indoor Gateway, 8-channel LoRaWAN, 863-870MHz, 10/100 Ethernet, LTE, SIM, 1.2dBi 868MHz antenna, 2x LTE antenna, USB-C |
| 0 | ||
| HX15-9-LR-GIL-102 | Digi International Inc | HX15 Indoor Gateway, 8-channel LoRaWAN, 902-928MHz, 10/100 Ethernet, LTE, SIM, 1.2dBi 915Mhz Antenna, 2x LTE Antenna, USB-C |
| 0 | ||
AMEL10-24SMAZ | Aimtec | RoHS : Compliant |
| 0 | ||
| HX20-8-LR-GOL-102 | Digi International Inc | HX20 Outdoor Gateway, 8-channel LoRaWAN, 868MHz, 10/100 Ethernet, 802.3af PoE+, LTE Cat-M1, SIM, IP67 |
| 0 | ||
| AMEL10-24S277HAGY | Aimtec | RoHS : Compliant |
| 0 | ||
| HX20-9-LR-GOL-102 | Digi International Inc | HX20 Outdoor Gateway, 8-channel LoRaWAN, 902-928MHz, 10/100 Ethernet, 802.3af PoE+, LTE Cat-M1, SIM, IP67 |
| 0 | ||
 DB Roberts | SHTC-MDL-1024 | SHEREX FASTENING SO | 0 | |||
| 2051-440-SMODL1.020-12 | RAF Electronic Hardware | 0 | ||||
 FDH Electronics | UL1028126530 | Atlas Wire Corporation | Wire and Cable | 9,000 | ||
| UL1028813329-92 | Whitmore/Wirenetics | Wire and Cable | 3,300 | |||
| UL10288133293 | Atlas Wire Corporation | Wire and Cable | 3,000 | |||
| UL10288133298 | Unified Wire and Cable Inc | Wire and Cable |
| 2,400 | ||
| UL10288133296 | Atlas Wire Corporation | Wire and Cable |
| 2,000 | ||
| UL10288133292 | Coleman Cable Inc | Wire and Cable | 2,000 | |||
| UL10288133294 | Atlas Wire Corporation | Wire and Cable | 1,692 | |||
| UL10288133290 | Atlas Wire Corporation | Hook-Up Wire |
| 885 | ||
| UL10288133293 | Unified Wire and Cable Inc | Wire and Cable | 350 | |||
| UL10288133291 | Unified Wire and Cable Inc | Wire and Cable | 230 | |||
| GXL 10-2 | Wire | Wire and Cable | 1 | |||
| CL102021 | SOURIAU-SUNBANK | Connector Misc | 0 | |||
| CL102041 | SOURIAU-SUNBANK | Connector Misc | 0 | |||
CL102051 | SOURIAU-SUNBANK | Connector Misc RoHS : Compliant | 0 | |||
| CL102030 | SOURIAU-SUNBANK | Connector Misc | 0 | |||
 Flip Electronics | HBL1025T1G | onsemi | Stock, Ship Today RoHS : Compliant |
| 27,000 | |
| SAF7770EL/102Q120K | NXP Semiconductors | Stock | 1,260 | |||
| NL102048HFA600T3 | Broadcom Limited | Stock, Ship Today |
| 28 | ||
 Maritex | RI0402L102JT | Guangdong Hottech Industrrial Co | Chip Resistor; SMD; 0402; 1KOhm; 5%; 1/16W |
| 59,969 | |
| RI0603L102JT | Guangdong Hottech Industrrial Co | Chip Resistor; SMD; 0603; 1K; 5%; 1/10W |
| 502 | ||
| MM-1018-L-10-20-S, AT10-20 | RRE | Micro Miniature Reed Switch RS-MM1018, Operate Band: 10-20AT, Switching Current (max): 0,5A, Dimensions: FI1,8x10mm, SMD |
| 249 | ||
| EKYB160ELL102MJ16S | United Chemi-Con Inc | Electrolytic capacitor; 1000uF; 16V; 20%; 105deg.C; 10x16 r5mm; 10000h |
| 182 | ||
| RI0805L102JT | Guangdong Hottech Industrrial Co | Chip Resistor; SMD; 0805; 1K0; 5%; 1/8W |
| 159 | ||
 Pasternack Enterprises US | PE87FL1021 | Pasternack Enterprises | Key Specifications, Connector-In Series: SMA, Connector-In Gender: Female, Connector-Out Series: SMA, Connector-Out Gender: Female, Impedance: 50 Ohm, Maximum Insertion Loss: 1.5 dB, Maximum Power: 50 Watts. Bandpass Filter with SMA Female Connectors Operating at 4 GHz with a 25 MHz Passband Bandwidth. Band pass filter PE87FL1021 from Pasternack is part of our extensive in-stock RF components for sale. Our band pass filter is manufactured with SMA connectors that are female. This band pass filter for has a maximum insertion loss of 1.5 dB and a maximum power of 50 watts. Our PE87FL1021 is a band pass filter with a 50-ohm impedance and is a great option for wireless communication, test instrumentation, and antenna testing applications. Our high-quality filter has a 1.2:1 typical passband VSWR. Our high-quality filter’s typical passband VSWR is 1.2:1 and its maximum passband VSWR is 1.3:1. This radio frequency filter has a lower stopband rejection of 70 dB(min) and an upper stopband rejection of 70 dB(min). The PE87FL1021 band pass filter from Pasternack operates at temperatures ranging from -20 to 60 deg C. This radio frequency filter has the lower stop band from 3.5 GHz and the upper stop band to 4.5 GHz. This cavity band pass filter’s body is made of aluminum and has a grey paint finish. Our band pass filter has dimensions of 2.29 inches long, 0.47 inches wide, and 1.14 inches high. The PE87FL1021 band pass filter is one of over 40,000 RF, microwave, and millimeter wave components supplied by Pasternack. Our band pass filter can be bought and shipped worldwide the same day as our other in-stock RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality radio frequency filters that meet your requirements. |
| 5 | |
| PE87FL1024 | Pasternack Enterprises | Key Specifications, Connector-In Series: SMA, Connector-In Gender: Female, Connector-Out Series: SMA, Connector-Out Gender: Female, Impedance: 50 Ohm, Maximum Insertion Loss: 1.5 dB, Maximum Power: 50 Watts. Bandpass Filter with SMA Female Connectors Operating at 8 GHz with a 40 MHz Passband Bandwidth. Band pass filter PE87FL1024 from Pasternack is part of our extensive in-stock RF components for sale. Our band pass filter is manufactured with SMA connectors that are female. This band pass filter for has a maximum insertion loss of 1.5 dB and a maximum power of 50 watts. Our PE87FL1024 is a band pass filter with a 50-ohm impedance and is a great option for wireless communication, test instrumentation, and antenna testing applications. Our high-quality filter has a 1.2:1 typical passband VSWR. Our high-quality filter’s typical passband VSWR is 1.2:1 and its maximum passband VSWR is 1.3:1. This radio frequency filter has a lower stopband rejection of 70 dB(min) and an upper stopband rejection of 70 dB(min). The PE87FL1024 band pass filter from Pasternack operates at temperatures ranging from -20 to 70 deg C. This radio frequency filter has the lower stop band from 7.5 GHz and the upper stop band to 8.5 GHz. This cavity band pass filter’s body is made of aluminum and has a grey paint finish. Our band pass filter has dimensions of 2.29 inches long, 0.47 inches wide, and 0.83 inches high. The PE87FL1024 band pass filter is one of over 40,000 RF, microwave, and millimeter wave components supplied by Pasternack. Our band pass filter can be bought and shipped worldwide the same day as our other in-stock RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality radio frequency filters that meet your requirements. |
| 3 | ||
| PE87FL1023 | Pasternack Enterprises | Key Specifications, Connector-In Series: SMA, Connector-In Gender: Female, Connector-Out Series: SMA, Connector-Out Gender: Female, Impedance: 50 Ohm, Maximum Insertion Loss: 1.8 dB, Maximum Power: 50 Watts. Bandpass Filter with SMA Female Connectors Operating at 6 GHz with a 45 MHz Passband Bandwidth. Band pass filter PE87FL1023 from Pasternack is part of our extensive in-stock RF components for sale. Our band pass filter is manufactured with SMA connectors that are female. This band pass filter for has a maximum insertion loss of 1.8 dB and a maximum power of 50 watts. Our PE87FL1023 is a band pass filter with a 50-ohm impedance and is a great option for wireless communication, test instrumentation, and antenna testing applications. Our high-quality filter has a 1.2:1 typical passband VSWR. Our high-quality filter’s typical passband VSWR is 1.2:1 and its maximum passband VSWR is 1.3:1. This radio frequency filter has a lower stopband rejection of 70 dB(min) and an upper stopband rejection of 70 dB(min). The PE87FL1023 band pass filter from Pasternack operates at temperatures ranging from -20 to 70 deg C. This radio frequency filter has the lower stop band from 5.5 GHz and the upper stop band to 6.5 GHz. This cavity band pass filter’s body is made of aluminum and has a grey paint finish. Our band pass filter has dimensions of 2.29 inches long, 0.47 inches wide, and 0.91 inches high. The PE87FL1023 band pass filter is one of over 40,000 RF, microwave, and millimeter wave components supplied by Pasternack. Our band pass filter can be bought and shipped worldwide the same day as our other in-stock RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality radio frequency filters that meet your requirements. |
| 3 | ||
| PE87FL1026 | Pasternack Enterprises | Key Specifications, Connector-In Series: SMA, Connector-In Gender: Female, Connector-Out Series: SMA, Connector-Out Gender: Female, Bandpass Min Frequency: 3.49 GHz, Bandpass Max Frequency: 3.52 GHz, Impedance: 50 Ohm, Maximum Insertion Loss: 2 dB, Maximum Power: 30 Watts. Bandpass Filter with SMA Female Connectors Operating from 3.485 GHz to 3.515 GHz with a 45 MHz Passband Bandwidth. Band pass filter PE87FL1026 from Pasternack is part of our extensive in-stock RF components for sale. Our band pass filter is manufactured with SMA connectors that are female. This band pass filter for has a maximum insertion loss of 2 dB and a maximum power of 30 watts. Our PE87FL1026 is a band pass filter with a 50-ohm impedance and is a great option for wireless communication, test instrumentation, and antenna testing applications. This band pass filter has a passband frequency ranging from 3.49 GHz to 3.52 GHz. Our high-quality filter has a 1.25:1 typical passband VSWR. Our high-quality filter’s typical passband VSWR is 1.25:1 and its maximum passband VSWR is 1.3:1. This radio frequency filter has a lower stopband rejection of 70 dB(min) and an upper stopband rejection of 70 dB(min). The Pasternack PE87FL1026 RF band pass filter offers a maximum passband ripple of 0.8 dB and a typical passband ripple of 0.6 dB. The PE87FL1026 band pass filter from Pasternack operates at temperatures ranging from 0 to 40 deg C. This radio frequency filter has the lower stop band from 3.3 GHz and the upper stop band to 3.7 GHz. This cavity band pass filter’s body is made of aluminum and has a grey paint finish. Our band pass filter has dimensions of 4.33 inches long, 0.71 inches wide, and 1.02 inches high. The PE87FL1026 band pass filter is one of over 40,000 RF, microwave, and millimeter wave components supplied by Pasternack. Our band pass filter can be bought and shipped worldwide the same day as our other in-stock RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality radio frequency filters that meet your requirements. |
| 2 | ||
| PE87FL1020 | Pasternack Enterprises | Key Specifications, Connector-In Series: SMA, Connector-In Gender: Female, Connector-Out Series: SMA, Connector-Out Gender: Female, Bandpass Min Frequency: 2.4 GHz, Bandpass Max Frequency: 2.48 GHz, Impedance: 50 Ohm, Maximum Insertion Loss: 0.5 dB, Maximum Power: 50 Watts. Bandpass Filter with SMA Female Connectors Operating from 2.4 GHz to 2.484 GHz with a 165 MHz Passband Bandwidth. Band pass filter PE87FL1020 from Pasternack is part of our extensive in-stock RF components for sale. Our band pass filter is manufactured with SMA connectors that are female. This band pass filter for has a maximum insertion loss of 0.5 dB and a maximum power of 50 watts. Our PE87FL1020 is a band pass filter with a 50-ohm impedance and is a great option for wireless communication, test instrumentation, and antenna testing applications. This band pass filter has a passband frequency ranging from 2.4 GHz to 2.48 GHz. Our high-quality filter has a 1.25:1 typical passband VSWR. Our high-quality filter’s typical passband VSWR is 1.25:1 and its maximum passband VSWR is 1.3:1. This radio frequency filter has a lower stopband rejection of 50 dB(min) and an upper stopband rejection of 50 dB(min). The Pasternack PE87FL1020 RF band pass filter offers a maximum passband ripple of 0.3 dB and a typical passband ripple of 0.15 dB. The PE87FL1020 band pass filter from Pasternack operates at temperatures ranging from -25 to 60 deg C. This radio frequency filter has the lower stop band from 2.1 GHz and the upper stop band to 2.8 GHz. This cavity band pass filter’s body is made of aluminum and has a grey paint finish. Our band pass filter has dimensions of 2.44 inches long, 0.83 inches wide, and 2.44 inches high. The PE87FL1020 band pass filter is one of over 40,000 RF, microwave, and millimeter wave components supplied by Pasternack. Our band pass filter can be bought and shipped worldwide the same day as our other in-stock RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality radio frequency filters that meet your requirements. |
| 2 | ||
| PE87FL1022 | Pasternack Enterprises | Key Specifications, Connector-In Series: SMA, Connector-In Gender: Female, Connector-Out Series: SMA, Connector-Out Gender: Female, Impedance: 50 Ohm, Maximum Insertion Loss: 1.8 dB, Maximum Power: 50 Watts. Bandpass Filter with SMA Female Connectors Operating at 5 GHz with a 40 MHz Passband Bandwidth. Band pass filter PE87FL1022 from Pasternack is part of our extensive in-stock RF components for sale. Our band pass filter is manufactured with SMA connectors that are female. This band pass filter for has a maximum insertion loss of 1.8 dB and a maximum power of 50 watts. Our PE87FL1022 is a band pass filter with a 50-ohm impedance and is a great option for wireless communication, test instrumentation, and antenna testing applications. Our high-quality filter has a 1.2:1 typical passband VSWR. Our high-quality filter’s typical passband VSWR is 1.2:1 and its maximum passband VSWR is 1.3:1. This radio frequency filter has a lower stopband rejection of 70 dB(min) and an upper stopband rejection of 70 dB(min). The PE87FL1022 band pass filter from Pasternack operates at temperatures ranging from -20 to 60 deg C. This radio frequency filter has the lower stop band from 4.5 GHz and the upper stop band to 5.5 GHz. This cavity band pass filter’s body is made of aluminum and has a grey paint finish. Our band pass filter has dimensions of 2.29 inches long, 0.47 inches wide, and 1.02 inches high. The PE87FL1022 band pass filter is one of over 40,000 RF, microwave, and millimeter wave components supplied by Pasternack. Our band pass filter can be bought and shipped worldwide the same day as our other in-stock RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality radio frequency filters that meet your requirements. |
| 1 | ||
| PE87FL1027 | Pasternack Enterprises | Key Specifications, Connector-In Series: SMA, Connector-In Gender: Female, Connector-Out Series: SMA, Connector-Out Gender: Female, Bandpass Min Frequency: 1.88 GHz, Bandpass Max Frequency: 1.92 GHz, Impedance: 50 Ohm, Maximum Insertion Loss: 1 dB, Maximum Power: 50 Watts. Bandpass Filter with SMA Female Connectors Operating from 1.88 GHz to 1.92 GHz with a 55 MHz Passband Bandwidth. Band pass filter PE87FL1027 from Pasternack is part of our extensive in-stock RF components for sale. Our band pass filter is manufactured with SMA connectors that are female. This band pass filter for has a maximum insertion loss of 1 dB and a maximum power of 50 watts. Our PE87FL1027 is a band pass filter with a 50-ohm impedance and is a great option for wireless communication, test instrumentation, and antenna testing applications. This band pass filter has a passband frequency ranging from 1.88 GHz to 1.92 GHz. Our high-quality filter has a 1.25:1 typical passband VSWR. Our high-quality filter’s typical passband VSWR is 1.25:1 and its maximum passband VSWR is 1.3:1. This radio frequency filter has a lower stopband rejection of 60 dB(min) and an upper stopband rejection of 60 dB(min). The Pasternack PE87FL1027 RF band pass filter offers a maximum passband ripple of 0.5 dB and a typical passband ripple of 0.4 dB. The PE87FL1027 band pass filter from Pasternack operates at temperatures ranging from -25 to 70 deg C. This radio frequency filter has the lower stop band from 1.83 GHz and the upper stop band to 1.97 GHz. This cavity band pass filter’s body is made of aluminum and has a grey paint finish. Our band pass filter has dimensions of 3.47 inches long, 1.02 inches wide, and 2.36 inches high. The PE87FL1027 band pass filter is one of over 40,000 RF, microwave, and millimeter wave components supplied by Pasternack. Our band pass filter can be bought and shipped worldwide the same day as our other in-stock RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality radio frequency filters that meet your requirements. |
| 1 | ||
| PE87FL1028 | Pasternack Enterprises | Key Specifications, Connector-In Series: SMA, Connector-In Gender: Female, Connector-Out Series: SMA, Connector-Out Gender: Female, Bandpass Min Frequency: 2.01 GHz, Bandpass Max Frequency: 2.03 GHz, Impedance: 50 Ohm, Maximum Insertion Loss: 1 dB, Maximum Power: 50 Watts. Bandpass Filter with SMA Female Connectors Operating from 2.01 GHz to 2.025 GHz with a 25 MHz Passband Bandwidth. Band pass filter PE87FL1028 from Pasternack is part of our extensive in-stock RF components for sale. Our band pass filter is manufactured with SMA connectors that are female. This band pass filter for has a maximum insertion loss of 1 dB and a maximum power of 50 watts. Our PE87FL1028 is a band pass filter with a 50-ohm impedance and is a great option for wireless communication, test instrumentation, and antenna testing applications. This band pass filter has a passband frequency ranging from 2.01 GHz to 2.03 GHz. Our high-quality filter has a 1.25:1 typical passband VSWR. Our high-quality filter’s typical passband VSWR is 1.25:1 and its maximum passband VSWR is 1.3:1. This radio frequency filter has a lower stopband rejection of 60 dB(min) and an upper stopband rejection of 60 dB(min). The Pasternack PE87FL1028 RF band pass filter offers a maximum passband ripple of 0.5 dB and a typical passband ripple of 0.4 dB. The PE87FL1028 band pass filter from Pasternack operates at temperatures ranging from -25 to 70 deg C. This radio frequency filter has the lower stop band from 1.98 GHz and the upper stop band to 2.06 GHz. This cavity band pass filter’s body is made of aluminum and has a grey paint finish. Our band pass filter has dimensions of 3.47 inches long, 1.02 inches wide, and 2.36 inches high. The PE87FL1028 band pass filter is one of over 40,000 RF, microwave, and millimeter wave components supplied by Pasternack. Our band pass filter can be bought and shipped worldwide the same day as our other in-stock RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality radio frequency filters that meet your requirements. |
| 1 | ||
| PE87FL1025 | Pasternack Enterprises | Key Specifications, Connector-In Series: SMA, Connector-In Gender: Female, Connector-Out Series: SMA, Connector-Out Gender: Female, Bandpass Min Frequency: 2.99 GHz, Bandpass Max Frequency: 3.02 GHz, Impedance: 50 Ohm, Maximum Insertion Loss: 2 dB, Maximum Power: 30 Watts. Bandpass Filter with SMA Female Connectors Operating from 2.985 GHz to 3.015 GHz with a 40 MHz Passband Bandwidth. Band pass filter PE87FL1025 from Pasternack is part of our extensive in-stock RF components for sale. Our band pass filter is manufactured with SMA connectors that are female. This band pass filter for has a maximum insertion loss of 2 dB and a maximum power of 30 watts. Our PE87FL1025 is a band pass filter with a 50-ohm impedance and is a great option for wireless communication, test instrumentation, and antenna testing applications. This band pass filter has a passband frequency ranging from 2.99 GHz to 3.02 GHz. Our high-quality filter has a 1.25:1 typical passband VSWR. Our high-quality filter’s typical passband VSWR is 1.25:1 and its maximum passband VSWR is 1.3:1. This radio frequency filter has a lower stopband rejection of 70 dB(min) and an upper stopband rejection of 70 dB(min). The Pasternack PE87FL1025 RF band pass filter offers a maximum passband ripple of 0.8 dB and a typical passband ripple of 0.6 dB. The PE87FL1025 band pass filter from Pasternack operates at temperatures ranging from 0 to 40 deg C. This radio frequency filter has the lower stop band from 2.8 GHz and the upper stop band to 3.2 GHz. This cavity band pass filter’s body is made of aluminum and has a grey paint finish. Our band pass filter has dimensions of 4.33 inches long, 0.71 inches wide, and 1.02 inches high. The PE87FL1025 band pass filter is one of over 40,000 RF, microwave, and millimeter wave components supplied by Pasternack. Our band pass filter can be bought and shipped worldwide the same day as our other in-stock RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality radio frequency filters that meet your requirements. |
| 1 | ||
| PE87FL1029 | Pasternack Enterprises | Key Specifications, Connector-In Series: SMA, Connector-In Gender: Female, Connector-Out Series: SMA, Connector-Out Gender: Female, Bandpass Min Frequency: 2.5 GHz, Bandpass Max Frequency: 2.7 GHz, Impedance: 50 Ohm, Maximum Insertion Loss: 0.5 dB. Bandpass Filter with SMA Female Connectors Operating from 2.5 GHz to 2.7 GHz with a 235 MHz Passband Bandwidth. Band pass filter PE87FL1029 from Pasternack is part of our extensive in-stock RF components for sale. Our band pass filter is manufactured with SMA connectors that are female. This band pass filter for has a maximum insertion loss of 0.5 dB and a maximum power of 0 watts. Our PE87FL1029 is a band pass filter with a 50-ohm impedance and is a great option for wireless communication, test instrumentation, and antenna testing applications. This band pass filter has a passband frequency ranging from 2.5 GHz to 2.7 GHz. This radio frequency filter has a lower stopband rejection of 60 dB(min) and an upper stopband rejection of 60 dB(min). The PE87FL1029 band pass filter from Pasternack operates at temperatures ranging from -20 to 70 deg C. This radio frequency filter has the lower stop band from 2.4 GHz and the upper stop band to 2.8 GHz. This cavity band pass filter’s body is made of aluminum and has a grey paint finish. Our band pass filter has dimensions of 3.35 inches long, 0.79 inches wide, and 1.77 inches high. The PE87FL1029 band pass filter is one of over 40,000 RF, microwave, and millimeter wave components supplied by Pasternack. Our band pass filter can be bought and shipped worldwide the same day as our other in-stock RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality radio frequency filters that meet your requirements. |
| 0 | ||
 Relay Specialties | THL-1024U-31 | Macromatic Industrial Controls Inc | TDR; 1...100 s; On Delay 24-240VAC/12-48VDC; 1A SPST-NO QC 0.250"; Surface Mount |
| 5 | |
 Venkel Ltd. | PWCR0805-TL-1020FT | VENKEL LTD | Pulse Withstanding CR;0805;1/4W;�200PPM;102R;�1% RoHS : Compliant | 0 | ||
| AGCR0201-NL-1022FT | VENKEL LTD | Auto Grade Resistor;0201;1/20W;�200PPM;10.2K;�1% RoHS : Compliant | 0 | |||
| PWCR0805-RL-1020FT | VENKEL LTD | Pulse Withstanding CR;0805;1/8W;�200PPM;102R;�1% RoHS : Compliant | 0 | |||
| PWCR0603-QL-1020FT | VENKEL LTD | Pulse Withstanding CR;0603;1/10W;�200PPM;102R;�1% RoHS : Compliant | 0 | |||
| AGCR0201-NL-102JT | VENKEL LTD | Auto Grade Resistor;0201;1/20W;�200PPM;1K;�5% RoHS : Compliant | 0 | |||
| AGCR0201-NL-1020FT | VENKEL LTD | Auto Grade Resistor;0201;1/20W;�200PPM;102R;�1% RoHS : Compliant | 0 | |||
| AGCR0805-RL-1024FT | VENKEL LTD | Auto Grade Resistor;0805;1/8W;�200PPM;1.02M;�1% RoHS : Compliant | 0 | |||
| PWCR0805-VL-1020DT | VENKEL LTD | Pulse Withstanding CR;0805;1/2W;�200PPM;102R;�0.5% RoHS : Compliant | 0 | |||
| AGCR2010-WL-1024FT | VENKEL LTD | Auto Grade Resistor;2010;3/4W;�200PPM;1.02M;�1% RoHS : Compliant | 0 | |||
| AGCR0201-NL-1023FT | VENKEL LTD | Auto Grade Resistor;0201;1/20W;�200PPM;102K;�1% RoHS : Compliant | 0 | |||
| AGCR2512-XL-1024FT | VENKEL LTD | Auto Grade Resistor;2512;1W;�200PPM;1.02M;�1% RoHS : Compliant | 0 | |||
| AGCR1210-VL-1024FT | VENKEL LTD | Auto Grade Resistor;1210;1/2W;�200PPM;1.02M;�1% RoHS : Compliant | 0 | |||
| PWCR0603-UL-1020DT | VENKEL LTD | Pulse Withstanding CR;0603;1/3W;�200PPM;102R;�0.5% RoHS : Compliant | 0 | |||
| PWCR0603-UL-1020FT | VENKEL LTD | Pulse Withstanding CR;0603;1/3W;�200PPM;102R;�1% RoHS : Compliant | 0 | |||
| PWCR0603-TL-1020FT | VENKEL LTD | Pulse Withstanding CR;0603;1/4W;�200PPM;102R;�1% RoHS : Compliant | 0 | |||
 Vyrian | PE30L0FL102MAB | Vishay Intertechnologies | Potentiometer, Cermet, 3W, 1000ohm, 54.8V, 20% +/-Tol, 150ppm/Cel, 1 Turn(s) RoHS : Compliant | 15,103 | ||
| SL1021B260CF | Littelfuse Inc | Gas Discharge Tube Suppressor RoHS : Compliant | 13,047 | |||
| SL1024B400RF | Littelfuse Inc | Gas Discharge Tube Suppressor RoHS : Compliant | 12,767 | |||
| MXL1028AESA | Analog Devices Inc | 10,675 | ||||
| SL1024B500C | Littelfuse Inc | Gas Discharge Tube Suppressor RoHS : Compliant | 10,438 | |||
| MXL1028MH | Analog Devices Inc | 9,604 | ||||
| MXL1028AMJ8 | Analog Devices Inc | 8,414 | ||||
| SL1021B250X | Littelfuse Inc | Gas Discharge Tube Suppressor RoHS : Compliant | 6,472 | |||
| MXL1028CS | Analog Devices Inc | 6,409 | ||||
| TIBPAL20L10-25MJTB | Texas Instruments | EE PLD, 25ns, PAL-Type, TTL, CDIP24 RoHS : Not Compliant | 6,225 | |||
| SL1024A500R | Littelfuse Inc | Gas Discharge Tube Suppressor RoHS : Compliant | 5,798 | |||
| SL1021A300C | Littelfuse Inc | Gas Discharge Tube Suppressor RoHS : Compliant | 5,214 | |||
| SL1024A400RG | Littelfuse Inc | Gas Discharge Tube Suppressor RoHS : Compliant | 4,757 | |||
| SL1024B090C | Littelfuse Inc | Gas Discharge Tube Suppressor RoHS : Compliant | 3,970 | |||
| KTC-PRL/1024 | Kingston Technology Company | 3,008 | ||||
 Win Source Electronics | WSL10203L000FEA | Vishay Huntington | RES 0.003 OHM 1% 2W 2010 |
| 97,287 | |
| TSML1020 | Vishay Huntington | Infrared Emitter 950nm 7mW/sr Circular Top Mount 2-Pin SMD T/R / EMITTER IR 940NM 100MA SMD |
| 30,000 | ||
| AO4482L_102 | Alpha & Omega Semiconductor | MOSFET N-CH 100V 6A 8SOIC |
| 16,300 | ||
| LY61L102416ALL-10 | Lyontek Inc | 1024K X 16 BIT HIGH SPEED CMOS SRAM RoHS : Compliant |
| 7,000 | ||
BQ76PL102RGTR | Texas Instruments | IC BATTERY MGMT CTRLR 16QFN RoHS : Compliant |
| 6,410 | ||
| BQ76PL102RGTT | Texas Instruments | IC BATTERY MGMT CTRLR 16QFN RoHS : Compliant |
| 6,410 | ||
BQ76PL102RGT | Texas Instruments | Battery Cell Monitor and Balancer |
| 6,410 | ||
| B3SL-1022P | OMRON Corporation | SWITCH TACTILE SPST-NO 0.05A 12V / Tactile Switch SPST-NO Top Actuated Surface Mount RoHS : Compliant |
| 1,000 | ||
| EPCQL1024F24IN | Intel Corporation | IC QUAD-SERIAL LOW VOLTAGE CONFI RoHS : Compliant |
| 95 |
| ALLDATASHEETはお客様のビジネスに役立ちますか？ [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Japanese ▼ 
English
Chinese
German
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand