| 販売店 | 部品番号 | メーカー | 部品情報 | Price | Qty. BuyNow |
 ComSIT USA | M600511203FP
| mit | Electronic Component RoHS : Not Compliant | | 4,863
 |
B72660M600K72
| TDK Electronics | CERAMIC TRANSIENT VOLTAGE SUPPRESSOR Varistor, 85V, 4.8J, Surface Mount RoHS : Compliant | | 2,985
 |
 GLYN GmbH & Co. KG | SFM6000D-5SLM
| Sensirion | Mass Flow Meter, Digital RS485 / IýC, Legris 6 mm RoHS : Compliant | | 1
 |
 NexGen Digital | CMM6004-SC-0G0T
| MACOM | | | 51,000
 |
WNM6001-3/TR
| Will Semiconductor Ltd | | | 1,744
 |
ACB3216M-600-T
| TDK Corporation | RoHS : Compliant | | 800
 |
 Powell Electronics | LTM-600
| Bivar Inc | LED Mount, Self Retaining, Vertical, 0.6 RoHS : Compliant | 100 : $0.2229 500 : $0.2017 1,000 : $0.1929 5,000 : $0.1415 10,000 : $0.115
|
| 15,444
 |
NTM-600
| Bivar Inc | LED Mount, Self Retaining, Vertical, 0.6 RoHS : Compliant | 100 : $0.2052 500 : $0.1875 1,000 : $0.1787 5,000 : $0.1292 10,000 : $0.1044
|
| 2,638
 |
BU-6161-M-60-0
| Mueller Electric Company | Black Shrouded Banana Plug on Both Ends- RoHS : Compliant | 7 : $24.4949 42 : $22.2681
|
| 16
 |
3SBM6004R2
| CII Guardian | MIL/AERO RELAY 3SBM6004R2 | 1 : $1,054.23 2 : $1,034.52 20 : $1,014.81 25 : $938.71 50 : $883.91
|
| 9
 |
M6007
| Heyco | SSCG 1/2 NPT | 10 : $60.615 100 : $54.554
|
| 7
 |
 Chip 1 Exchange | FBMH1608HM600-T
| | INSTOCK | | 5,150
 |
M-600.6W2RF100PPM
| Flexohm Company | INSTOCK | | 4,000
 |
M60-04-30-134P
| Mitsubishi Electric | INSTOCK | | 500
 |
M600340PCIBRX221
| | INSTOCK | | 240
 |
M600340PC1BD794
| | INSTOCK | | 90
 |
FBJ3216HM600-T
| TAIYO YUDEN | INSTOCK | | 50
 |
LCM600Q-T-N
| Artesyn Embedded Technologies | INSTOCK | | 20
 |
PM600HSA120
| | INSTOCK | | 10
 |
M600653-1203FP
| Mitsubishi Electric | INSTOCK | | 5
 |
50M60-01-2-03N
| | INSTOCK | | 3
 |
 Braemac Americas-Symmetry | ABMM-6.000MHZ-D2-T
| Abracon Corporation | CRYSTAL 6.000MHZ 18PF SMD | | 0
 |
CFM600S120C-PC
| Cincon Electronics Corporation | ITE/Industrial Open Frame Baseplate-cooled Power Supply | | 0
 |
CFM600S180-R
| Cincon Electronics Corporation | ITE/Industrial Open Frame Baseplate-cooled Power Supply | | 0
 |
CFM600S300-PC
| Cincon Electronics Corporation | ITE/Industrial Open Frame Baseplate-cooled Power Supply | | 0
 |
CFM600S480
| Cincon Electronics Corporation | ITE/Industrial Open Frame Baseplate-cooled Power Supply | | 0
 |
CFM600S300F-PC
| Cincon Electronics Corporation | ITE/Industrial Open Frame Baseplate-cooled Power Supply | | 0
 |
CFM600S150F
| Cincon Electronics Corporation | ITE/Industrial Open Frame Baseplate-cooled Power Supply | | 0
 |
CFM600S180F-R
| Cincon Electronics Corporation | ITE/Industrial Open Frame Baseplate-cooled Power Supply | | 0
 |
CFM600S480-PC
| Cincon Electronics Corporation | ITE/Industrial Open Frame Baseplate-cooled Power Supply | | 0
 |
CFM600S480F-PC
| Cincon Electronics Corporation | ITE/Industrial Open Frame Baseplate-cooled Power Supply | | 0
 |
CFM600S360C-PC
| Cincon Electronics Corporation | ITE/Industrial Open Frame Baseplate-cooled Power Supply | | 0
 |
ABMM-6.000MHZ-B2-T
| Abracon Corporation | CRYSTAL 6.0000MHZ 18PF SMD | | 0
 |
CFM600S150F-R
| Cincon Electronics Corporation | ITE/Industrial Open Frame Baseplate-cooled Power Supply | | 0
 |
CFM600S360
| Cincon Electronics Corporation | ITE/Industrial Open Frame Baseplate-cooled Power Supply | | 0
 |
CFM600S280
| Cincon Electronics Corporation | ITE/Industrial Open Frame Baseplate-cooled Power Supply | | 0
 |
 Maritex | AM-2835H489W-S1-08HL-HR3(R9)-3SDCM 6000K
| Hongli Zhihui Group Co LTD | LED LED HL-AM-2835H489W-S1-08HL-HR3(R9)-3SDCM; PLCC2 2835; cool white 6000K; min. 25lm/60mA; 2.8-3.4V; CRI min 80; 120 deg; yellow diffused lens; 3.3x2.8x0.7mm; Honglitronic /16000 | 16,000 : $0.009 1,000 : $0.009 100 : $0.01 1 : $0.012
|
| 3,950
 |
ADUM6000ARWZ-RL
 | Analog Devices Inc | DC DC Converters; ADUM6000ARWZ-RL; ANALOG DEVICES; 16; 1; 7.366 mm RoHS : Compliant | 30 : $10.588 10 : $12.559 1 : $15.757
|
| 139
 |
 Pasternack Enterprises US | TCOM-600-FR
| Pasternack Enterprises | Key Specifications, Generic Name: TCOM-600-FR, Flex Type: Flexible, Impedance: 50 Ohm, Dielectric Type: PE (F), Velocity of Propagation: 87 %, Jacket Diameter: 0.59 in, Jacket Material: FRPE, No. of Shields: 3, Passive Intermodulation: -155 dBc, RF Shielding: 100 dB, Frequency, Max: 10 GHz, Max Operating Temperature: 85 deg C, Center Conductor Type: Solid, Inner Conductor, Number of Strands: 1, Minimum Bend Radius, One Time: 1.5 in, Minimum Bend Radius, Repeated: 6 in, Coax Type: Coax. Low PIM Flexible TCOM-600-FR Fire Rated Coax Cable Triple Shielded with Black FRPE Jacket. The TCOM-600-FR part number from Pasternack is a low PIM coax cable that is flexible. Pasternack flexible coax RF cable has an impedance of 50 Ohm and a foam polyethylene dielectric. Our TCOM-600-FR coax cable is constructed with a 0.59-inch jacket made of FRPE. This RF coaxial cable is ideal for wireless base station interconnect, distributed antenna systems (DAS), antenna jumpers, UL/NEC & CSA rating of ‘CMR’ and ‘FT4’, low smoke requirements, small cell and indoor-riser CMR applications. This coaxial cable has a dielectric withstanding voltage of 4,000 Vdc. This black-colored low PIM coax cable has a nominal capacitance of 23.4 pF/Ft. This TCOM-600-FR flexible RF cable has a shield count of 3 and RF shielding of 100 dB. Our coax cable from Pasternack has a maximum frequency of 10 GHz. The maximum passive intermodulation of this low PIM cable is -155 dBc. Additional specifications for this TCOM-600-FR triple-shielded RF coaxial cable are on our downloadable PDF datasheet above. This low PIM RF cable has a one-time minimum bend radius of 1.5 inch and a repeat minimum bend radius of 6 inch. Our low PIM 50 Ohm flexible cable has a peak power rating of 40,000 watts. Our TCOM-600-FR coax cable can operate at temperatures ranging from -40 to +85 deg C. The black-colored coax cable has a typical insertion loss/attenuation of 0.45, 1.1, 1.9, 2.8, 4.5, 7.6 and 11 dB/100ft at frequency of 30 MHz, 150 MHz, 450 MHz, 900 MHz, 2 GHz, 5.8 GHz and 10 GHz respectively. Our TCOM-600-FR flexible RF cable has a solid copper clad aluminum center conductor. This fire-rated coaxial cable features a dual shield of tinned copper braid over the silver plated copper braid. Pasternack TCOM-600-FR low PIM coax cables are part of our RF, microwave, and millimeter wave components. These flexible cables and our other RF parts are available for same-day shipping worldwide. Custom RF cable assemblies using TCOM-600-FR or other coax can be built and shipped the same business day as well. | 1 : $23.2 25 : $22.27 50 : $21.58 100 : $21.11
|
| 840
 |
TCOM-600
| Pasternack Enterprises | Key Specifications, Generic Name: TCOM-600, Flex Type: Flexible, Impedance: 50 Ohm, Dielectric Type: PE (F), Velocity of Propagation: 87 %, Jacket Diameter: 0.59 in, Jacket Material: PE, No. of Shields: 2, Passive Intermodulation: -155 dBc, RF Shielding: 100 dB, Frequency, Max: 10 GHz, Max Operating Temperature: 85 deg C, Center Conductor Type: Solid, Inner Conductor, Number of Strands: 1, Minimum Bend Radius, One Time: 1.5 in, Minimum Bend Radius, Repeated: 6 in, Coax Type: Coax. Low PIM Flexible TCOM-600 Coax Cable Double Shielded with Black PE Jacket. TCOM-600 part number from Pasternack is a low PIM coax cable that is flexible. Pasternack flexible coax RF cable has an impedance of 50 Ohm and a PE (F) dielectric. Our TCOM-600 coax cable is constructed with a 0.59-inch jacket made of polyethylene. This coaxial cable has a dielectric withstanding voltage of 4,000 Vdc. This black-colored low PIM coax cable has a nominal capacitance of 23.4 pF/Ft. The TCOM-600 flexible RF cable has a shield count of 2 and RF shielding of 100 dB. Our coax cable from Pasternack has a maximum frequency of 10 GHz. The maximum passive intermodulation of this low PIM cable is -155 dBc. Additional specifications for this TCOM-600 double-shielded RF coaxial cable are on our downloadable PDF datasheet above. This flexible coax RF cable has a one-time minimum bend radius of 1.5 inch. Our TCOM-600 coax cable can operate at temperatures ranging from -40 to +85 degrees C. Our black-colored coax cable has a typical insertion loss/attenuation of 1, 1.2, 1.8, 2.6, 3.5, 3.9, 4.1, 4.6, 7.6 and 10.6 dB/100ft at frequency of 150 MHz, 220 MHz, 450 MHz, 900 MHz, 1.5 GHz, 1.8 GHz, 2 GHz, 2.5 GHz, 5.8 GHz and 10 GHz respectively. The TCOM-600 flexible RF cable has a solid copper clad aluminum center conductor. This coaxial cable features a dual shield of tinned copper braid over the silver plated copper braid. Pasternack TCOM-600 low PIM coax cables are part of our RF, microwave, and millimeter wave components. These flexible cables and our other RF parts are available for same-day shipping worldwide. Custom RF cable assemblies using TCOM-600 or other coax can be built and shipped the same business day as well. | 1 : $15.32 25 : $14.71 25 : $14.71 50 : $14.25
|
| 294
 |
TCOM-600-BULK
| Pasternack Enterprises | Key Specifications, Generic Name: TCOM-600, Flex Type: Flexible, Impedance: 50 Ohm, Dielectric Type: PE (F), Velocity of Propagation: 87 %, Jacket Diameter: 0.59 in, Jacket Material: PE, No. of Shields: 2, Passive Intermodulation: -155 dBc, RF Shielding: 100 dB, Frequency, Max: 10 GHz, Max Operating Temperature: 85 deg C, Center Conductor Type: Solid, Inner Conductor, Number of Strands: 1, Minimum Bend Radius, One Time: 1.5 in, Minimum Bend Radius, Repeated: 6 in, Coax Type: Coax. Low PIM Flexible TCOM-600 Coax Cable Double Shielded with Black PE Jacket. TCOM-600-BULK part number from Pasternack is a TCOM-600 low PIM coax cable that is flexible. Pasternack flexible coax RF cable has an impedance of 50 Ohm and a PE (F) dielectric. Our TCOM-600 coax cable is constructed with a 0.59-inch jacket made of polyethylene. This coaxial cable has a dielectric withstanding voltage of 4,000 Vdc. This black-colored low PIM coax cable has a nominal capacitance of 23.4 pF/Ft. The TCOM-600 flexible RF cable has a shield count of 2 and RF shielding of 100 dB. Our coax cable from Pasternack has a maximum frequency of 10 GHz. The maximum passive intermodulation of this low PIM cable is -155 dBc. Additional specifications for this TCOM-600-BULK double-shielded RF coaxial cable are on our downloadable PDF datasheet above. This flexible coax RF cable has a one-time minimum bend radius of 1.5 inch. Our TCOM-600 coax cable can operate at temperatures ranging from -40 to +85 degrees C. Our black-colored coax cable has a typical insertion loss/attenuation of 1, 1.2, 1.8, 2.6, 3.5, 3.9, 4.1, 4.6, 7.6 and 10.6 dB/100ft at frequency of 150 MHz, 220 MHz, 450 MHz, 900 MHz, 1.5 GHz, 1.8 GHz, 2 GHz, 2.5 GHz, 5.8 GHz and 10 GHz respectively. The TCOM-600-BULK flexible RF cable has a solid copper clad aluminum center conductor. This coaxial cable features a dual shield of tinned copper braid over the silver plated copper braid. Pasternack TCOM-600 low PIM coax cables are part of our RF, microwave, and millimeter wave components. These flexible cables and our other RF parts are available for same-day shipping worldwide. Custom RF cable assemblies using TCOM-600 or other coax can be built and shipped the same business day as well. | 1 : $19.29 25 : $18.52 25 : $18.52 50 : $17.94
|
| 35
 |
TCOM-600-FR-BULK
| Pasternack Enterprises | Key Specifications, Generic Name: TCOM-600-FR, Flex Type: Flexible, Impedance: 50 Ohm, Dielectric Type: PE (F), Velocity of Propagation: 87 %, Jacket Diameter: 0.59 in, Jacket Material: FRPE, No. of Shields: 3, Passive Intermodulation: -155 dBc, RF Shielding: 100 dB, Frequency, Max: 10 GHz, Max Operating Temperature: 85 deg C, Center Conductor Type: Solid, Inner Conductor, Number of Strands: 1, Minimum Bend Radius, One Time: 1.5 in, Minimum Bend Radius, Repeated: 6 in, Coax Type: Coax. Low PIM Flexible TCOM-600-FR Fire Rated Coax Cable Triple Shielded with Black FRPE Jacket. The TCOM-600-FR-BULK part number from Pasternack is a TCOM-600-FR low PIM coax cable that is flexible. Pasternack flexible coax RF cable has an impedance of 50 Ohm and a foam polyethylene dielectric. Our TCOM-600-FR coax cable is constructed with a 0.59-inch jacket made of FRPE. This RF coaxial cable is ideal for wireless base station interconnect, distributed antenna systems (DAS), antenna jumpers, UL/NEC & CSA rating of ‘CMR’ and ‘FT4’, low smoke requirements, small cell and indoor-riser CMR applications. This coaxial cable has a dielectric withstanding voltage of 4,000 Vdc. This black-colored low PIM coax cable has a nominal capacitance of 23.4 pF/Ft. This TCOM-600-FR flexible RF cable has a shield count of 3 and RF shielding of 100 dB. Our coax cable from Pasternack has a maximum frequency of 10 GHz. The maximum passive intermodulation of this low PIM cable is -155 dBc. Additional specifications for this TCOM-600-FR-BULK triple-shielded RF coaxial cable are on our downloadable PDF datasheet above. This low PIM RF cable has a one-time minimum bend radius of 1.5 inch and a repeat minimum bend radius of 6 inch. Our low PIM 50 Ohm flexible cable has a peak power rating of 40,000 watts. Our TCOM-600-FR coax cable can operate at temperatures ranging from -40 to +85 deg C. The black-colored coax cable has a typical insertion loss/attenuation of 0.45, 1.1, 1.9, 2.8, 4.5, 7.6 and 11 dB/100ft at frequency of 30 MHz, 150 MHz, 450 MHz, 900 MHz, 2 GHz, 5.8 GHz and 10 GHz respectively. Our TCOM-600-FR-BULK flexible RF cable has a solid copper clad aluminum center conductor. This fire-rated coaxial cable features a dual shield of tinned copper braid over the silver plated copper braid. Pasternack TCOM-600-FR low PIM coax cables are part of our RF, microwave, and millimeter wave components. These flexible cables and our other RF parts are available for same-day shipping worldwide. Custom RF cable assemblies using TCOM-600-FR or other coax can be built and shipped the same business day as well. | 1 : $25.49 25 : $24.47 50 : $23.71 100 : $23.2
|
| 30
 |