 |
データシートサーチシステム |
|
|
データシートサーチシステム |
|
MP1103-1-RX 販売店 |
| 販売店 | 部品番号 | メーカー | 部品情報 | Price | Qty. BuyNow | |
 ComSIT USA | TMP112AIDRLR | Texas Instruments | AVAILABLE EU RoHS : Compliant | 2,852 | ||
 NexGen Digital | TMP117AIYBGR | Texas Instruments | RoHS : Compliant | 100 | ||
 Chip 1 Exchange | TMP112AIDRLT | Texas Instruments | INSTOCK RoHS : Compliant | 2,714 | ||
| TMP117MAIYBGR | Texas Instruments | INSTOCK RoHS : Compliant | 434 | |||
| AMP1116202-1 | TE Connectivity | INSTOCK | 29 | |||
 Avnet Asia | DMP1100UCB4-7 | Diodes Incorporated | (Alt: DMP1100UCB4-7) RoHS : Compliant |
| 15,000 | |
| TLMP1100-GS15 | Vishay Intertechnologies | (Alt: TLMP1100-GS15) RoHS : Compliant | 0 | |||
| NSDEMP11XV6T1G | onsemi | 80 V Common Anode Switching Diode, quad, two duals. ONSSPCDDEYG8V5J; (Alt: NSDEMP11XV6T1G) RoHS : Compliant | 0 | |||
| UMP11NTN | ROHM Semiconductor | (Alt: UMP11NTN) RoHS : Compliant | 0 | |||
 Avnet Silica | NSDEMP11XV6T1G | onsemi | 80 V Common Anode Switching Diode quad two duals ONSSPCDDEYG8V5J (Alt: NSDEMP11XV6T1G) RoHS : Compliant | 852,000 | ||
| IMP11T110 | ROHM Semiconductor | Diode Switching 80V 03A 6Pin SMD TR (Alt: IMP11T110) RoHS : Compliant | 0 | |||
| EMP11FHT2R | ROHM Semiconductor | HyperFast Recovery Rectifier 100mA 6Pin SOT563 Emboss TR (Alt: EMP11FHT2R) RoHS : Compliant | 0 | |||
| MP111DS-LF-Z | Monolithic Power Systems | (Alt: MP111DS-LF-Z) RoHS : Compliant | 0 | |||
| DMP1100UCB4-7 | Diodes Incorporated | (Alt: DMP1100UCB4-7) RoHS : Compliant | 0 | |||
| NSDEMP11XV6T5G | onsemi | 80 V Common Anode Switching Diode quad two duals ONSSPCDDEYG8V5J (Alt: NSDEMP11XV6T5G) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | APAMP-111 | Abracon Corporation | I type GPS antenna module (Adhesive Base) RoHS : Compliant |
| 0 | |
APAMP-116 | Abracon Corporation | X type GPS antenna module (Adhesive Base) RoHS : Compliant |
| 0 | ||
 DB Roberts | 62MP1187W | Essentra Components | HOLE PLUG, SNAP IN , 1.187 IN | 0 | ||
| 22MP11815W | Essentra Components | SNAP BUSHING, 1.187 HOLE, .937 | 0 | |||
| 22MP11815 | Essentra Components | SNAP BUSHING, 1.187 HOLE, .937 | 0 | |||
| 62MP1187 | Essentra Components | 0 | ||||
| 62MP1187N | Essentra Components | HOLE PLUG, SNAP IN , 1.187 IN | 0 | |||
 EBV Elektronik | TLMP1100-GS15 | Vishay Intertechnologies | LED Single Chip Pure Green 561nm 30mA 2Pin SMD TR (Alt: TLMP1100-GS15) RoHS : Compliant | 0 | ||
| SMP11A-M3/85A | Vishay Intertechnologies | 400W11V 5UNIDIRSMP TVS (Alt: SMP11A-M3/85A) RoHS : Compliant | 0 | |||
| AS20-M42M-P11 | Broadcom Limited | (Alt: AS20-M42M-P11) RoHS : Compliant | 0 | |||
| SMP11A-M3/84A | Vishay Intertechnologies | 400W11V 5UNIDIRSMP TVS (Alt: SMP11A-M3/84A) RoHS : Compliant | 0 | |||
| MSMP11A-M3/89A | Vishay Intertechnologies | (Alt: MSMP11A-M3/89A) RoHS : Compliant | 0 | |||
| NSDEMP11XV6T1G | onsemi | 80 V Common Anode Switching Diode quad two duals ONSSPCDDEYG8V5J (Alt: NSDEMP11XV6T1G) RoHS : Compliant | 0 | |||
 Flip Electronics | NSDEMP11XV6T5G | onsemi | Stock, Ship Today RoHS : Compliant |
| 32,000 | |
 Maritex | TMP116NAIDRVR | Texas Instruments | Temperature Sensors; TMP116NAIDRVR; TEXAS INSTRUMENTS; 6; 800 �m; 2 mm RoHS : Compliant |
| 2,999 | |
| TMP117AIDRVR | Texas Instruments | Temperature Sensors; TMP117AIDRVR; TEXAS INSTRUMENTS; 6; 800 �m; 2 mm RoHS : Compliant |
| 794 | ||
| XMP-11V | JST Manufacturing | Rectangular Terminals; XMP-11V; JST RoHS : Compliant |
| 488 | ||
| TMP119AIYBGR | Texas Instruments | Temperature Sensors; TMP119AIYBGR; TEXAS INSTRUMENTS; 6; 500 �m; 1 mm RoHS : Compliant |
| 254 | ||
| TMP117AIYBGR | Texas Instruments | Temperature Sensors; TMP117AIYBGR; TEXAS INSTRUMENTS; 6; 500 �m; 1 mm RoHS : Compliant |
| 99 | ||
 Pasternack Enterprises US | PE70MP1105 | Pasternack Enterprises | Key Specifications, Connector In Series: N, Connector In Gender: Female, Connector In Impedance: 50 Ohm, Connector Out Series: N, Connector Out Gender: Female, Connector Out Impedence: 75 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 50 Ohm N Female to 75 Ohm N Female Matching Pad Operating from DC to 3 GHz. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1105 from Pasternack has type N connector in and is 50 Ohm, type N connector out and is 75 Ohm. This coaxial type N to type N impedance matching pad has a female type N in and a female N type out. Our 50 Ohm type N to 75 Ohm type N impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 3 GHz. This radio frequency 50 Ohm type N female to 75 Ohm N type female RF impedance matching pad design has a maximum attenuation of 7.5. Body material of the 50 Ohm type N to 75 Ohm type N matching pad is brass. 50 Ohm type N female to 75 Ohm type N female RF impedance pad PE70MP1105 from Pasternack is rated for a maximum VSWR of 1.25:1 and a maximum input power of 0.5 Watts. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with N type to N type connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. |
| 11 | |
| PE70MP1109 | Pasternack Enterprises | Key Specifications, Connector In Series: SMA, Connector In Gender: Female, Connector In Impedance: 50 Ohm, Connector Out Series: F, Connector Out Gender: Female, Connector Out Impedence: 75 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 50 Ohm SMA Female to 75 Ohm F Female Matching Pad Operating from DC to 3 GHz. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1109 from Pasternack has SMA connector in and is 50 Ohm, type F connector out and is 75 Ohm. This coaxial SMA to type F impedance matching pad has a female SMA in and a female type F out. Our 50 Ohm SMA to 75 Ohm F type impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 3 GHz. This radio frequency 50 Ohm SMA female to 75 Ohm F type female RF impedance matching pad design has a maximum attenuation of 7.5. Body material of the 50 Ohm SMA to 75 Ohm type F matching pad is brass. 50 Ohm SMA female to 75 Ohm type F female RF impedance pad PE70MP1109 from Pasternack is rated for a maximum VSWR of 1.25:1 and a maximum input power of 0.5 Watts. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with SMA to F type connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. |
| 9 | ||
| PE70MP1103 | Pasternack Enterprises | Key Specifications, Connector In Series: N, Connector In Gender: Male, Connector In Impedance: 50 Ohm, Connector Out Series: F, Connector Out Gender: Female, Connector Out Impedence: 75 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 50 Ohm N Male to 75 Ohm F Female Matching Pad Operating from DC to 3 GHz. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1103 from Pasternack has type N connector in and is 50 Ohm, type F connector out and is 75 Ohm. This coaxial type N to type F impedance matching pad has a male type N in and a female type F out. Our 50 Ohm N type to 75 Ohm F type impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 3 GHz. This radio frequency 50 Ohm type N male to 75 Ohm F type female RF impedance matching pad design has a maximum attenuation of 7.5. Body material of the 50 Ohm type N to 75 Ohm type F matching pad is brass. 50 Ohm N type male to 75 Ohm type F female RF impedance pad PE70MP1103 from Pasternack is rated for a maximum VSWR of 1.25:1 and a maximum input power of 0.5 Watts. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with type N to type F connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. |
| 7 | ||
| PE70MP1108 | Pasternack Enterprises | Key Specifications, Connector In Series: SMA, Connector In Gender: Male, Connector In Impedance: 50 Ohm, Connector Out Series: F, Connector Out Gender: Female, Connector Out Impedence: 75 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 50 Ohm SMA Male to 75 Ohm F Female Matching Pad Operating from DC to 3 GHz. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1108 from Pasternack has SMA connector in and is 50 Ohm, type F connector out and is 75 Ohm. This coaxial SMA to type F impedance matching pad has a male SMA in and a female F type out. Our 50 Ohm SMA to 75 Ohm type F impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 3 GHz. This radio frequency 50 Ohm SMA male to 75 Ohm type F female RF impedance matching pad design has a maximum attenuation of 7.5. Body material of the 50 Ohm SMA to 75 Ohm F type matching pad is brass. 50 Ohm SMA male to 75 Ohm type F female RF impedance pad PE70MP1108 from Pasternack is rated for a maximum VSWR of 1.25:1 and a maximum input power of 0.5 Watts. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with SMA to type F connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. |
| 5 | ||
| PE70MP1107 | Pasternack Enterprises | Key Specifications, Connector In Series: SMA, Connector In Gender: Male, Connector In Impedance: 50 Ohm, Connector Out Series: F, Connector Out Gender: Male, Connector Out Impedence: 75 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 50 Ohm SMA Male to 75 Ohm F Male Matching Pad Operating from DC to 3 GHz. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1107 from Pasternack has SMA connector in and is 50 Ohm, type F connector out and is 75 Ohm. This coaxial SMA to F type impedance matching pad has a male SMA in and a male type F out. Our 50 Ohm SMA to 75 Ohm type F impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 3 GHz. This radio frequency 50 Ohm SMA male to 75 Ohm type F male RF impedance matching pad design has a maximum attenuation of 7.5. Body material of the 50 Ohm SMA to 75 Ohm type F matching pad is brass. 50 Ohm SMA male to 75 Ohm F type male RF impedance pad PE70MP1107 from Pasternack is rated for a maximum VSWR of 1.25:1 and a maximum input power of 0.5 Watts. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with SMA to type F connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. |
| 5 | ||
| PE70MP1111 | Pasternack Enterprises | Key Specifications, Connector In Series: TNC, Connector In Gender: Female, Connector In Impedance: 50 Ohm, Connector Out Series: F, Connector Out Gender: Male, Connector Out Impedence: 75 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 50 Ohm TNC Female to 75 Ohm F Male Matching Pad Operating from DC to 3 GHz. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1111 from Pasternack has TNC connector in and is 50 Ohm, type F connector out and is 75 Ohm. This coaxial TNC to F type impedance matching pad has a female TNC in and a male type F out. Our 50 Ohm TNC to 75 Ohm type F impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 3 GHz. This radio frequency 50 Ohm TNC female to 75 Ohm type F male RF impedance matching pad design has a maximum attenuation of 7.5. Body material of the 50 Ohm TNC to 75 Ohm F type matching pad is brass. 50 Ohm TNC female to 75 Ohm type F male RF impedance pad PE70MP1111 from Pasternack is rated for a maximum VSWR of 1.25:1 and a maximum input power of 0.5 Watts. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with TNC to type F connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. |
| 5 | ||
| PE70MP1110 | Pasternack Enterprises | Key Specifications, Connector In Series: TNC, Connector In Gender: Female, Connector In Impedance: 50 Ohm, Connector Out Series: F, Connector Out Gender: Female, Connector Out Impedence: 75 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 50 Ohm TNC Female to 75 Ohm F Female Matching Pad Operating from DC to 3 GHz. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1110 from Pasternack has TNC connector in and is 50 Ohm, type F connector out and is 75 Ohm. This coaxial TNC to type F impedance matching pad has a female TNC in and a female F type out. Our 50 Ohm TNC to 75 Ohm type F impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 3 GHz. This radio frequency 50 Ohm TNC female to 75 Ohm type F female RF impedance matching pad design has a maximum attenuation of 7.5. Body material of the 50 Ohm TNC to 75 Ohm type F matching pad is brass. 50 Ohm TNC female to 75 Ohm F type female RF impedance pad PE70MP1110 from Pasternack is rated for a maximum VSWR of 1.25:1 and a maximum input power of 0.5 Watts. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with TNC to type F connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. |
| 5 | ||
| PE70MP1112 | Pasternack Enterprises | Key Specifications, Connector In Series: BNC, Connector In Gender: Male, Connector In Impedance: 75 Ohm, Connector Out Series: BNC, Connector Out Gender: Male, Connector Out Impedence: 50 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 75 Ohm BNC Male to 50 Ohm BNC Male Matching Pad Operating from DC to 3 GHz. Pasternack’s PE70MP1112 RF impedance matching pad (also known as coaxial matching pad) has a 75 Ohm BNC male connector in and a 50 Ohm BNC male connector out. This coaxial matching pad can operate at frequencies ranging from DC to 3 GHz. Our BNC to BNC RF matching pad has brass body material with tri-metal over copper body plating. This impedance matching pad is stocked to be readily available for same-business-day shipment. The impedance matching pad is used to match the different impedances between two devices, maximizing power transfer between the two impedances. This radio frequency BNC male to BNC male matching pad has a typical attenuation of 4 dB. The PE70MP1112 impedance matching pad from Pasternack is suitable for CATV/cable networks, test and measurement, communication systems and wireless systems. This RF matching pad offers a maximum VSWR of 1.25:1. Pasternack’s BNC to BNC RF matching pad has a maximum input power rating (CW) of 0.5 Watts. This impedance matching pad is designed to withstand temperatures ranging from -30 to 70 degrees C. Our matching pad has a length of 2.02 inches, a width of 0.57 inches, and a weight of 0.03 lbs. Additional dimensions and specifications for this RF impedance matching pad are on our downloadable PDF datasheet above. This 75 Ohm to 50 Ohm matching pad is just part of over one million RF microwave and millimeter wave components supplied by Pasternack. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal BNC male to BNC male RF impedance matching pad for your requirements. |
| 4 | ||
| PE70MP1106 | Pasternack Enterprises | Key Specifications, Connector In Series: N, Connector In Gender: Female, Connector In Impedance: 50 Ohm, Connector Out Series: F, Connector Out Gender: Female, Connector Out Impedence: 75 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 50 Ohm N Female to 75 Ohm F Female Matching Pad Operating from DC to 3 GHz. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1106 from Pasternack has type N connector in and is 50 Ohm, type F connector out and is 75 Ohm. This coaxial N type to type F impedance matching pad has a female type N in and a female F type out. Our 50 Ohm type N to 75 Ohm type F impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 3 GHz. This radio frequency 50 Ohm type N female to 75 Ohm type F female RF impedance matching pad design has a maximum attenuation of 7.5. Body material of the 50 Ohm N type to 75 Ohm type F matching pad is brass. 50 Ohm type N female to 75 Ohm F type female RF impedance pad PE70MP1106 from Pasternack is rated for a maximum VSWR of 1.25:1 and a maximum input power of 0.5 Watts. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with type N to type F connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. |
| 3 | ||
| PE70MP1100 | Pasternack Enterprises | Key Specifications, Connector In Series: BNC, Connector In Gender: Male, Connector In Impedance: 50 Ohm, Connector Out Series: BNC, Connector Out Gender: Female, Connector Out Impedence: 75 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 50 Ohm BNC Male to 75 Ohm BNC Female Matching Pad Operating from DC to 3 GHz. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1100 from Pasternack has BNC connector in and is 50 Ohm, BNC connector out and is 75 Ohm. This coaxial BNC to BNC impedance matching pad has a male BNC in and a female BNC out. Our 50 Ohm BNC to 75 Ohm BNC impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 3 GHz. This radio frequency 50 Ohm BNC male to 75 Ohm BNC female RF impedance matching pad design has a maximum attenuation of 7.5. Body material of the 50 Ohm BNC to 75 Ohm BNC matching pad is brass. 50 Ohm BNC male to 75 Ohm BNC female RF impedance pad PE70MP1100 from Pasternack is rated for a maximum VSWR of 1.25:1 and a maximum input power of 0.5 Watts. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with BNC to BNC connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. |
| 3 | ||
| PE70MP1104 | Pasternack Enterprises | Key Specifications, Connector In Series: N, Connector In Gender: Female, Connector In Impedance: 50 Ohm, Connector Out Series: F, Connector Out Gender: Male, Connector Out Impedence: 75 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 50 Ohm N Female to 75 Ohm F Male Matching Pad Operating from DC to 3 GHz. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1104 from Pasternack has type N connector in and is 50 Ohm, type F connector out and is 75 Ohm. This coaxial type N to F type impedance matching pad has a female N type in and a male type F out. Our 50 Ohm type N to 75 Ohm type F impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 3 GHz. This radio frequency 50 Ohm type N female to 75 Ohm type F male RF impedance matching pad design has a maximum attenuation of 7.5. Body material of the 50 Ohm type N to 75 Ohm type F matching pad is brass. 50 Ohm N type female to 75 Ohm F type male RF impedance pad PE70MP1104 from Pasternack is rated for a maximum VSWR of 1.25:1 and a maximum input power of 0.5 Watts. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with type N to F type connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. |
| 1 | ||
| PE70MP1101 | Pasternack Enterprises | Key Specifications, Connector In Series: N, Connector In Gender: Male, Connector In Impedance: 50 Ohm, Connector Out Series: N, Connector Out Gender: Female, Connector Out Impedence: 75 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 50 Ohm N Male to 75 Ohm N Female Matching Pad Operating from DC to 3 GHz. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1101 from Pasternack has type N connector in and is 50 Ohm, type N connector out and is 75 Ohm. This coaxial type N to type N impedance matching pad has a male N type in and a female type N out. Our 50 Ohm type N to 75 Ohm type N impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 3 GHz. This radio frequency 50 Ohm type N male to 75 Ohm N type female RF impedance matching pad design has a maximum attenuation of 7.5. Body material of the 50 Ohm N type to 75 Ohm N type matching pad is brass. 50 Ohm type N male to 75 Ohm type N female RF impedance pad PE70MP1101 from Pasternack is rated for a maximum VSWR of 1.25:1 and a maximum input power of 0.5 Watts. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with type N to type N connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. |
| 1 | ||
| PE70MP1102 | Pasternack Enterprises | Key Specifications, Connector In Series: N, Connector In Gender: Male, Connector In Impedance: 75 Ohm, Connector Out Series: N, Connector Out Gender: Female, Connector Out Impedence: 50 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 75 Ohm N Male to 50 Ohm N Female Matching Pad Operating from DC to 3 GHz. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1102 from Pasternack has type N connector in and is 75 Ohm, type N connector out and is 50 Ohm. This coaxial N type to N type impedance matching pad has a male type N in and a female type N out. Our 75 Ohm type N to 50 Ohm type N impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 3 GHz. This radio frequency 75 Ohm type N male to 50 Ohm N type female RF impedance matching pad design has a maximum attenuation of 7.5. Body material of the 75 Ohm type N to 50 Ohm type N matching pad is brass. 75 Ohm N type male to 50 Ohm N type female RF impedance pad PE70MP1102 from Pasternack is rated for a maximum VSWR of 1.25:1 and a maximum input power of 0.5 Watts. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with type N to type N connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. |
| 1 | ||
 TE Connectivity | KUMP-11D18-24 | TE Connectivity | KUMP-11D18-24=KU- Relay & Contactor Type: General Purpose Power Relay Current Type: DC Coil Magnetic System: Monostable Contact Arrangement: 2 Form C DPDT-CO Contact Current Rating: 15 A General Purpose Power Relay DC Monostable 2 Form C DPDT-CO | Electromechanical Relay | Part Number: KUMP-11D18-24 | Internal Number: 7-1393116-2 | TE Connectivity RoHS : Compliant |
| 194 | |
| KUMP-11D18-12 | TE Connectivity | KUMP-11D18-12=KU Relay & Contactor Type: General Purpose Power Relay Current Type: DC Coil Magnetic System: Monostable Contact Arrangement: 2 Form C DPDT-CO Contact Current Rating: 15 A General Purpose Power Relay DC Monostable 2 Form C DPDT-CO | Electromechanical Relay | Part Number: KUMP-11D18-12 | Internal Number: 7-1393116-1 | TE Connectivity RoHS : Compliant |
| 176 | ||
| KUMP-11A18-120 | TE Connectivity | KUMP-11A18-120=KU Relay & Contactor Type: General Purpose Power Relay Current Type: AC Coil Magnetic System: Monostable Contact Arrangement: 2 Form C DPDT-CO Contact Current Rating: 15 A General Purpose Power Relay AC Monostable 2 Form C DPDT-CO | Electromechanical Relay | Part Number: KUMP-11A18-120 | Internal Number: 6-1393116-2 | TE Connectivity RoHS : Compliant |
| 146 | ||
 Win Source Electronics | DMP1100UCB4-7 | Diodes Incorporated | MOSFET P-CHA 12V 2.5A WLB0808 / Qualified to AEC-Q101 Standards for High Reliability RoHS : Compliant |
| 990,000 | |
| TMP112AIDRL | Texas Instruments | SENSOR TEMP I2C/SMBUS 6SOT |
| 181,066 | ||
| TMP112AIDRLT | Texas Instruments | SENSOR TEMP I2C/SMBUS SOT563 RoHS : Compliant |
| 163,350 | ||
| TMP117MAIDRVT | Texas Instruments | SENSOR TEMP RoHS : Compliant |
| 89,480 | ||
| TMP117MAIDRVR | Texas Instruments | TEMPERATURE SENSOR RoHS : Compliant |
| 80,000 | ||
| TMP116NAIDRVT | Texas Instruments | SENSOR DIGITAL -55C-125C 6WSON / Temperature Sensor Digital, Local -55°C ~ 125°C 16 b 6-WSON (2x2) RoHS : Compliant |
| 78,120 | ||
| TMP117AIDRVR | Texas Instruments | TEMPERATURE SENSOR / Temperature Sensor Digital, Local -55°C ~ 150°C 16 b 6-WSON (2x2) RoHS : Compliant |
| 57,450 | ||
| TMP117AIDRVT | Texas Instruments | SENSOR TEMP RoHS : Compliant |
| 54,210 | ||
| TMP112BIDRLT | Texas Instruments | SENSOR DIGITAL -40C-125C SOT563 / Temperature Sensor Digital, Local -40°C ~ 125°C 12 b SOT-5X3 RoHS : Compliant |
| 43,640 | ||
| TMP112BIDRLR | Texas Instruments | SENSOR DIGITAL -40C-125C 6SOT RoHS : Compliant |
| 41,830 | ||
| TMP117MAIYBGT | Texas Instruments | TEMP SENSOR RoHS : Compliant |
| 38,150 | ||
| TMP117MAIYBGR | Texas Instruments | TEMP SENSOR RoHS : Compliant |
| 37,800 | ||
| TMP116AIDRVR | Texas Instruments | SENSOR DIGITAL -55C-125C 6WSON / High-Accuracy, Low-Power, Digital Temperature Sensor With SMBus- and I2C-Compatible Interface RoHS : Compliant |
| 25,300 | ||
| TMP116AIDRVT | Texas Instruments | SENSOR DIGITAL -55C-125C 6WSON RoHS : Compliant |
| 24,310 | ||
| TMP117NAIYBGR | Texas Instruments | TEMP SENSOR / Temperature Sensor Digital, Local -55°C ~ 150°C 16 b 6-DSBGA (1.49x0.95) RoHS : Compliant |
| 7,960 |
| ALLDATASHEETはお客様のビジネスに役立ちますか？ [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Japanese ▼ 
English
Chinese
German
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand