| データシートサーチシステム |
|
MP1623-A8-RV 販売店 |
| 販売店 | 部品番号 | メーカー | 部品情報 | Price | Qty. BuyNow | |
![]() GLYN GmbH & Co. KG | QSMP-1570H | Ka-Ro electronics GmbH | QFN Style Solder Computer On Module STM32MP157C Du | 257 | ||
| QSMP-1570W | Ka-Ro electronics GmbH | QFN Style Solder Computer On Module STM32MP157C Du | 5 | |||
| MP1-11TGS-1145G7E | MiTAC International Corporation | Fanless embedded system with Intel© Tiger Lake-UP3 | 2 | |||
| QSMP-1530C | Ka-Ro electronics GmbH | QFN Style Solder Computer On Module STM32MP157C Du | 1 | |||
![]() PUI | 9111-5MP10S60P10C7PU-A001 | 2,504 | ||||
![]() Rutronik | FMP100JR-52-2K4 | YAGEO Corporation | FMP100 2,4K 5% 1W TK100 RoHS : Compliant |
| 85,000 | |
| FMP100JR-52-100R | YAGEO Corporation | FMP100 100R 5% 1W TK100 RoHS : Compliant |
| 75,000 | ||
| FMP100JT-52-1K | YAGEO Corporation | FMP100 1K 5% 1W TK100 RoHS : Compliant |
| 70,000 | ||
| FMP100JT-52-91K | YAGEO Corporation | FMP100 91K 5% 1W TK100 RoHS : Compliant |
| 60,000 | ||
| FMP100JT-52-22R | YAGEO Corporation | FMP100 22R 5% 1W TK100 RoHS : Compliant |
| 25,000 | ||
| FMP100JR-52-270K | YAGEO Corporation | FMP100 270K 5% 1W TK100 RoHS : Compliant |
| 20,000 | ||
| FMP100JT-52-1K8 | YAGEO Corporation | FMP100 1,8K 5% 1W TK100 RoHS : Compliant |
| 15,000 | ||
| TMP 1 | knitter-switch | 7,6x7,6x4,1mm THT 4,5N IP67 RoHS : Compliant |
| 7,850 | ||
| FMP100FTE52-120R | YAGEO Corporation | FMP100 120R 1% 1W TK50 RoHS : Compliant |
| 5,000 | ||
| FMP100FTF52-820R | YAGEO Corporation | FMP100 820R 1% 1W TK100 RoHS : Compliant |
| 5,000 | ||
| FMP100JR-52-680R | YAGEO Corporation | FMP100 680R 5% 1W TK100 RoHS : Compliant |
| 5,000 | ||
| FMP100JT-52-18R | YAGEO Corporation | FMP100 18R 5% 1W TK100 RoHS : Compliant |
| 5,000 | ||
| FMP100JT-52-2K2 | YAGEO Corporation | FMP100 2,2K 5% 1W TK100 RoHS : Compliant |
| 5,000 | ||
| FMP100JT-52-33K | YAGEO Corporation | FMP100 33K 5% 1W TK100 RoHS : Compliant |
| 5,000 | ||
| PJMP120N60EC_T0_00001 | PanJit Touch Screens | N-CH 600V 30A 120mOhm TO-220AB-L RoHS : Compliant |
| 150 | ||
![]() Chip-Germany GmbH | HLMP1301 | Avago Technologies | 6 | |||
| HLMP1503 | Avago Technologies | 6 | ||||
| MP143STGBU | MPE-Garry GmbH | 2 | ||||
| PMP150-15 | TT Electronics plc | 1 | ||||
![]() EBV Elektronik | STM32MP135FAE7T | STMicroelectronics | ARM MCU 32bit ARM CortexA7F 1 GHz 128 KB 160 KB 289 Pins LFBGA (Alt: STM32MP135FAE7T) RoHS : Compliant | 33,600 | ||
| HLMP-1719-A0002 | Broadcom Limited | LED Single Standard LED Yellow 589nm 7mA 2Pin T1 (Alt: HLMP-1719-A0002) RoHS : Compliant | 16,200 | |||
| HLMP-1503-D0000 | Broadcom Limited | (Alt: HLMP-1503-D0000) RoHS : Compliant | 16,000 | |||
| MP-1616-2103-65-90 | Luminus Devices | (Alt: MP-1616-2103-65-90) RoHS : Compliant | 12,000 | |||
| MSMP15A-M3/89A | Vishay Intertechnologies | (Alt: MSMP15A-M3/89A) RoHS : Compliant | 9,000 | |||
| STM32MP157CAB3 | STMicroelectronics | MPU STM32MP157C RISC 32Bit 650MHz 12V135V15V18V33V 354Pin LFBGA Tray (Alt: STM32MP157CAB3) RoHS : Compliant | 8,232 | |||
| STM32MP153CAA3 | STMicroelectronics | Microprocessor Dual Core Arm CortexA7 RISC 32Bit 650MHz 448Pin LFBGA Surface Mount Tray (Alt: STM32MP153CAA3) RoHS : Compliant | 6,636 | |||
| MP-1616-1103-35-80 | Luminus Devices | (Alt: MP-1616-1103-35-80) RoHS : Compliant | 6,000 | |||
| HLMP-1401-D0002 | Broadcom Limited | (Alt: HLMP-1401-D0002) RoHS : Compliant | 3,600 | |||
| STM32MP157DAD1 | STMicroelectronics | Microprocessor ARM Dual CortexA7ARM CortexM4 RISC 32Bit 800MHz 257Pin TFBGA Tray (Alt: STM32MP157DAD1) RoHS : Compliant | 1,104 | |||
| STM32MP153CAC3 | STMicroelectronics | MPU STM32MP153C RISC 32Bit 650MHz 12V135V15V18V33V 361Pin TFBGA Tray (Alt: STM32MP153CAC3) RoHS : Compliant | 567 | |||
| STM32MP151CAD3 | STMicroelectronics | MPU STM32MP151C RISC 32Bit 650MHz 12V135V15V18V33V 257Pin TFBGA Tray (Alt: STM32MP151CAD3) RoHS : Compliant | 552 | |||
| STM32MP151CAA3 | STMicroelectronics | Microprocessor Arm CortexA7 RISC 32Bit 650MHz 257Pin TFBGA Surface Mount Tray (Alt: STM32MP151CAA3) RoHS : Compliant | 420 | |||
| STM32MP157FAA1 | STMicroelectronics | Microprocessor ARM Dual CortexA7ARM CortexM4 RISC 32Bit 800MHz 448Pin LFBGA Tray (Alt: STM32MP157FAA1) RoHS : Compliant | 252 | |||
| AR49-M49M-P12V | Broadcom Limited | Rotary Encoder Optical Absolute 49 Bit Vertical 45 V to 55 V (Alt: AR49-M49M-P12V) RoHS : Compliant | 192 | |||
![]() Flip Electronics | NSDEMP11XV6T5G | onsemi | Stock, Ship Today RoHS : Compliant |
| 32,000 | |
| FAN5701UMP15X | onsemi | Stock, Ship Today RoHS : Compliant |
| 3,891 | ||
| FAN5361UMP182X | onsemi | Stock, Ship Today RoHS : Compliant |
| 2,694 | ||
| MC9S08MP16VLCR | NXP Semiconductors | Stock RoHS : Compliant | 2,000 | |||
| S9S08MP16E2MLFR | NXP Semiconductors | Stock RoHS : Compliant | 2,000 | |||
| MK22FN256VMP12 | NXP Semiconductors | Stock RoHS : Compliant | 1,521 | |||
| MK22FN512VMP12 | NXP Semiconductors | Stock RoHS : Compliant | 415 | |||
![]() Pasternack Enterprises US | PE51MP1002 | Pasternack Enterprises | Key Specifications, Antenna Type: Vehicular, Polarization: Linear, Vertical, Minimum Frequency: 132 MHz, Maximum Frequency: 174 MHz, Connector Series: NMO Mount, Impedance: 50 Ohm, Maximum Input VSWR: 2:1. |
| 8 | |
| PE70MP1108 | Pasternack Enterprises | Key Specifications, Connector In Series: SMA, Connector In Gender: Male, Connector In Impedance: 50 Ohm, Connector Out Series: F, Connector Out Gender: Female, Connector Out Impedence: 75 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 50 Ohm SMA Male to 75 Ohm F Female Matching Pad Operating from DC to 3 GHz. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1108 from Pasternack has SMA connector in and is 50 Ohm, type F connector out and is 75 Ohm. This coaxial SMA to type F impedance matching pad has a male SMA in and a female F type out. Our 50 Ohm SMA to 75 Ohm type F impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 3 GHz. This radio frequency 50 Ohm SMA male to 75 Ohm type F female RF impedance matching pad design has a maximum attenuation of 7.5. Body material of the 50 Ohm SMA to 75 Ohm F type matching pad is brass. 50 Ohm SMA male to 75 Ohm type F female RF impedance pad PE70MP1108 from Pasternack is rated for a maximum VSWR of 1.25:1 and a maximum input power of 0.5 Watts. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with SMA to type F connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. |
| 5 | ||
| PE70MP1107 | Pasternack Enterprises | Key Specifications, Connector In Series: SMA, Connector In Gender: Male, Connector In Impedance: 50 Ohm, Connector Out Series: F, Connector Out Gender: Male, Connector Out Impedence: 75 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 50 Ohm SMA Male to 75 Ohm F Male Matching Pad Operating from DC to 3 GHz. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1107 from Pasternack has SMA connector in and is 50 Ohm, type F connector out and is 75 Ohm. This coaxial SMA to F type impedance matching pad has a male SMA in and a male type F out. Our 50 Ohm SMA to 75 Ohm type F impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 3 GHz. This radio frequency 50 Ohm SMA male to 75 Ohm type F male RF impedance matching pad design has a maximum attenuation of 7.5. Body material of the 50 Ohm SMA to 75 Ohm type F matching pad is brass. 50 Ohm SMA male to 75 Ohm F type male RF impedance pad PE70MP1107 from Pasternack is rated for a maximum VSWR of 1.25:1 and a maximum input power of 0.5 Watts. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with SMA to type F connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. |
| 5 | ||
| PE51MP1000 | Pasternack Enterprises | Key Specifications, Antenna Type: Vehicular, Polarization: Linear, Vertical, Minimum Frequency: 108 MHz, Maximum Frequency: 520 MHz, Connector Series: NMO Mount, Impedance: 50 Ohm, Maximum Input VSWR: 2:1. |
| 3 | ||
| PE70MP1106 | Pasternack Enterprises | Key Specifications, Connector In Series: N, Connector In Gender: Female, Connector In Impedance: 50 Ohm, Connector Out Series: F, Connector Out Gender: Female, Connector Out Impedence: 75 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 50 Ohm N Female to 75 Ohm F Female Matching Pad Operating from DC to 3 GHz. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1106 from Pasternack has type N connector in and is 50 Ohm, type F connector out and is 75 Ohm. This coaxial N type to type F impedance matching pad has a female type N in and a female F type out. Our 50 Ohm type N to 75 Ohm type F impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 3 GHz. This radio frequency 50 Ohm type N female to 75 Ohm type F female RF impedance matching pad design has a maximum attenuation of 7.5. Body material of the 50 Ohm N type to 75 Ohm type F matching pad is brass. 50 Ohm type N female to 75 Ohm F type female RF impedance pad PE70MP1106 from Pasternack is rated for a maximum VSWR of 1.25:1 and a maximum input power of 0.5 Watts. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with type N to type F connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. |
| 3 | ||
| PE70MP1005 | Pasternack Enterprises | Key Specifications, Connector In Series: SMA, Connector In Gender: Female, Connector In Impedance: 50 Ohm, Connector Out Series: F, Connector Out Gender: Male, Connector Out Impedence: 75 Ohm, Minimum Frequency: 0.009 MHz, Maximum Frequency: 3 GHz. 50 Ohm SMA Female To 75 Ohm F Male Matching Pad Operating From 0.009 MHz to 3 GHz RoHS Compliant. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1005 from Pasternack has SMA connector in and is 50 Ohm, F connector out and is 75 Ohm. This coaxial SMA to F impedance matching pad has a female SMA in and a male F out. Our 50 Ohm SMA to 75 Ohm F impedance matching pad is manufactured with a minimum frequency of 0.009 MHz and a maximum frequency of 3 GHz. This radio frequency 50 Ohm SMA female to 75 Ohm F male RF impedance matching pad design has a maximum attenuation of 0 and an attenuation accuracy of 0 dB. Body material of the 50 Ohm to 75 Ohm SMA To F matching pad is copper. 50 Ohm SMA female to 75 Ohm F male RF impedance pad PE70MP1005 from Pasternack is rated for a maximum VSWR of and a maximum input power of 0 Watt. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with SMA to F connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. |
| 3 | ||
| PE70MP1100 | Pasternack Enterprises | Key Specifications, Connector In Series: BNC, Connector In Gender: Male, Connector In Impedance: 50 Ohm, Connector Out Series: BNC, Connector Out Gender: Female, Connector Out Impedence: 75 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 50 Ohm BNC Male to 75 Ohm BNC Female Matching Pad Operating from DC to 3 GHz. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1100 from Pasternack has BNC connector in and is 50 Ohm, BNC connector out and is 75 Ohm. This coaxial BNC to BNC impedance matching pad has a male BNC in and a female BNC out. Our 50 Ohm BNC to 75 Ohm BNC impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 3 GHz. This radio frequency 50 Ohm BNC male to 75 Ohm BNC female RF impedance matching pad design has a maximum attenuation of 7.5. Body material of the 50 Ohm BNC to 75 Ohm BNC matching pad is brass. 50 Ohm BNC male to 75 Ohm BNC female RF impedance pad PE70MP1100 from Pasternack is rated for a maximum VSWR of 1.25:1 and a maximum input power of 0.5 Watts. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with BNC to BNC connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. |
| 3 | ||
| PE70MP1007 | Pasternack Enterprises | Key Specifications, Connector In Series: SMA, Connector In Gender: Male, Connector In Impedance: 50 Ohm, Connector Out Series: F, Connector Out Gender: Male, Connector Out Impedence: 75 Ohm, Minimum Frequency: 0.009 MHz, Maximum Frequency: 3 GHz. 50 Ohm SMA Male To 75 Ohm F Male Matching Pad Operating From 0.009 MHz to 3 GHz RoHS Compliant. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1007 from Pasternack has SMA connector in and is 50 Ohm, F connector out and is 75 Ohm. This coaxial SMA to F impedance matching pad has a male SMA in and a male F out. Our 50 Ohm SMA to 75 Ohm F impedance matching pad is manufactured with a minimum frequency of 0.009 MHz and a maximum frequency of 3 GHz. This radio frequency 50 Ohm SMA male to 75 Ohm F male RF impedance matching pad design has a maximum attenuation of 0 and an attenuation accuracy of 0 dB. Body material of the 50 Ohm to 75 Ohm SMA To F matching pad is copper. 50 Ohm SMA male to 75 Ohm F male RF impedance pad PE70MP1007 from Pasternack is rated for a maximum VSWR of and a maximum input power of 0 Watt. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with SMA to F connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. |
| 2 | ||
| PE51MP1008 | Pasternack Enterprises | Key Specifications, Antenna Type: Vehicular, Polarization: Linear, Vertical, Minimum Frequency: 440 MHz, Maximum Frequency: 480 MHz, Connector Series: NMO Mount, Impedance: 50 Ohm, Maximum Input VSWR: 2:1. |
| 2 | ||
| PE70MP1104 | Pasternack Enterprises | Key Specifications, Connector In Series: N, Connector In Gender: Female, Connector In Impedance: 50 Ohm, Connector Out Series: F, Connector Out Gender: Male, Connector Out Impedence: 75 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 50 Ohm N Female to 75 Ohm F Male Matching Pad Operating from DC to 3 GHz. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1104 from Pasternack has type N connector in and is 50 Ohm, type F connector out and is 75 Ohm. This coaxial type N to F type impedance matching pad has a female N type in and a male type F out. Our 50 Ohm type N to 75 Ohm type F impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 3 GHz. This radio frequency 50 Ohm type N female to 75 Ohm type F male RF impedance matching pad design has a maximum attenuation of 7.5. Body material of the 50 Ohm type N to 75 Ohm type F matching pad is brass. 50 Ohm N type female to 75 Ohm F type male RF impedance pad PE70MP1104 from Pasternack is rated for a maximum VSWR of 1.25:1 and a maximum input power of 0.5 Watts. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with type N to F type connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. |
| 1 | ||
| PE51MP1009 | Pasternack Enterprises | Key Specifications, Antenna Type: Vehicular, Polarization: Linear, Vertical, Minimum Frequency: 144 MHz, Maximum Frequency: 174 MHz, Connector Series: NMO Mount, Impedance: 50 Ohm, Maximum Input VSWR: 2:1. |
| 1 | ||
| PE70MP1004 | Pasternack Enterprises | Key Specifications, Connector In Series: SMA, Connector In Gender: Female, Connector In Impedance: 50 Ohm, Connector Out Series: F, Connector Out Gender: Female, Connector Out Impedence: 75 Ohm, Minimum Frequency: 0.009 MHz, Maximum Frequency: 3 GHz. 50 Ohm SMA Female To 75 Ohm F Female Matching Pad Operating From 0.009 MHz to 3 GHz RoHS Compliant. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1004 from Pasternack has SMA connector in and is 50 Ohm, F connector out and is 75 Ohm. This coaxial SMA to F impedance matching pad has a female SMA in and a female F out. Our 50 Ohm SMA to 75 Ohm F impedance matching pad is manufactured with a minimum frequency of 0.009 MHz and a maximum frequency of 3 GHz. This radio frequency 50 Ohm SMA female to 75 Ohm F female RF impedance matching pad design has a maximum attenuation of 0 and an attenuation accuracy of 0 dB. Body material of the 50 Ohm to 75 Ohm SMA To F matching pad is copper. 50 Ohm SMA female to 75 Ohm F female RF impedance pad PE70MP1004 from Pasternack is rated for a maximum VSWR of and a maximum input power of 0 Watt. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with SMA to F connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. |
| 0 | ||
| PE51MP1011 | Pasternack Enterprises | Key Specifications, Antenna Type: Vehicular, Polarization: Linear, Vertical, Minimum Frequency: 450 MHz, Maximum Frequency: 960 MHz, Connector Series: NMO Mount, Impedance: 50 Ohm, Maximum Input VSWR: 2:1. |
| 0 | ||
| PE51MP1006 | Pasternack Enterprises | Key Specifications, Antenna Type: Vehicular, Polarization: Linear, Vertical, Minimum Frequency: 420 MHz, Maximum Frequency: 470 MHz, Connector Series: NMO Mount, Impedance: 50 Ohm, Maximum Input VSWR: 1.5:1. |
| 0 | ||
| PE70MP1006 | Pasternack Enterprises | Key Specifications, Connector In Series: SMA, Connector In Gender: Male, Connector In Impedance: 50 Ohm, Connector Out Series: F, Connector Out Gender: Female, Connector Out Impedence: 75 Ohm, Minimum Frequency: 0.009 MHz, Maximum Frequency: 3 GHz. 50 Ohm SMA Male To 75 Ohm F Female Matching Pad Operating From 0.009 MHz to 3 GHz RoHS Compliant. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1006 from Pasternack has SMA connector in and is 50 Ohm, F connector out and is 75 Ohm. This coaxial SMA to F impedance matching pad has a male SMA in and a female F out. Our 50 Ohm SMA to 75 Ohm F impedance matching pad is manufactured with a minimum frequency of 0.009 MHz and a maximum frequency of 3 GHz. This radio frequency 50 Ohm SMA male to 75 Ohm F female RF impedance matching pad design has a maximum attenuation of 0 and an attenuation accuracy of 0 dB. Body material of the 50 Ohm to 75 Ohm SMA To F matching pad is copper. 50 Ohm SMA male to 75 Ohm F female RF impedance pad PE70MP1006 from Pasternack is rated for a maximum VSWR of and a maximum input power of 0 Watt. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with SMA to F connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. |
| 0 | ||
![]() TE Connectivity | BACA-AMP-180 | TE Connectivity | MICRO MNL RPT CNT STRP 15AU LF Contact Mating Area Plating Material: Gold (Au) Contact Type: Receptacle Wire Contact Termination Area Plating Material: Tin Wire Size: 30 – 26 AWG Operating Voltage: 250 VAC Gold (Au) Receptacle Tin 30 – 26 AWG | Connector Contact | Part Number: BACA-AMP-180 | Internal Number: 1-794607-1 | TE Connectivity RoHS : Compliant |
| 112,349 | |
| BACA-AMP-158 | TE Connectivity | MINI AMP-IN 26-22 PTPHBZ PCB Terminal Type: PCB Pin PCB Hole Diameter: 1.4 mm PCB Hole Diameter: .055 in PCB Thickness (Recommended): 1.57 mm PCB Thickness (Recommended): .062 in PCB Pin 1.4 mm .055" 1.57 mm | PCB Terminal | Part Number: BACA-AMP-158 | Internal Number: 3-640663-1 | TE Connectivity RoHS : Compliant |
| 72,505 | ||
| BACA-AMP-148 | TE Connectivity | UMNL SPLIT PIN PTPBR Contact Mating Area Plating Material: Tin (Sn) Contact Type: Pin Wire Contact Termination Area Plating Material: Pre-Tin Wire Size: 24 – 18 AWG Operating Voltage: 600 VAC Tin (Sn) Pin Pre-Tin 24 – 18 AWG | Connector Contact | Part Number: BACA-AMP-148 | Internal Number: 350699-1 | TE Connectivity RoHS : Compliant |
| 53,129 | ||
| BACA-AMP-152 | TE Connectivity | CST-100 II HOUSING 4 POS Number of Positions: 4 Connector & Housing Type: Receptacle Connector Product Type: Housing Mating Retention: With Mating Retention Type: Latching Feature Receptacle Housing: 2.54Mm & 1 Row & Cst-100 Ii | 4 Receptacle Housing With | Part Number: BACA-AMP-152 | Internal Number: 1375820-4 | TE Connectivity RoHS : Compliant |
| 40,774 | ||
| BACA-AMP-120 | TE Connectivity | 02P MTA100 CONN ASSY NATL 30AU Number of Positions: 2 Connector & Housing Type: Receptacle Connector Product Type: Connector Assembly Mating Alignment: Without Mating Retention: With Nylon Gold Plated Receptacle: 2.54 Mm & Mating Alignment | 2 Receptacle Connector Assembly Without | Part Number: BACA-AMP-120 | Internal Number: 3-641238-2 | TE Connectivity RoHS : Compliant |
| 39,562 | ||
| BACA-AMP-108 | TE Connectivity | 03P MTA100 CONN ASSY LF Number of Positions: 3 Connector & Housing Type: Receptacle Connector Product Type: Connector Assembly Mating Alignment: With Mating Alignment Type: Polarization Nylon Gold Plated Receptacle: 2.54 Mm & With Mating Alignment & Mta 100 | 3 Receptacle Connector Assembly With | Part Number: BACA-AMP-108 | Internal Number: 3-644043-3 | Alias Number: 1371899 | TE Connectivity RoHS : Compliant |
| 15,263 | ||
| BACA-AMP-136 | TE Connectivity | 10POS,MICRO MNL,RCPT HSG Number of Positions: 10 Connector & Housing Type: Receptacle Connector Product Type: Housing Termination Method to Wire & Cable: Crimp Connector System: Wire-to-Board Wire-to-Wire Standard Rectangular Connector | 10 Receptacle Housing Crimp | Part Number: BACA-AMP-136 | Internal Number: 1-794617-0 | TE Connectivity RoHS : Compliant |
| 12,065 | ||
| BACA-AMP-194 | TE Connectivity | PIN CONT 26-30 15 GOLD L/P Contact Mating Area Plating Material: Gold (Au) Contact Type: Pin Wire Contact Termination Area Plating Material: Tin Wire Size: 30 – 26 AWG Operating Voltage: 250 VAC Gold (Au) Pin Tin 30 – 26 AWG | Connector Contact | Part Number: BACA-AMP-194 | Internal Number: 1-794613-1 | TE Connectivity RoHS : Compliant |
| 7,974 | ||
| BACA-AMP-192 | TE Connectivity | CMNL PIN PTPPHBZL/P Contact Mating Area Plating Material: Tin (Sn) Contact Type: Pin Wire Contact Termination Area Plating Material: Tin Wire Size: 24 – 18 AWG Operating Voltage: 250 VAC Tin (Sn) Pin 24 – 18 AWG | Connector Contact | Part Number: BACA-AMP-192 | Internal Number: 60618-4 | TE Connectivity RoHS : Compliant |
| 7,351 | ||
| KUMP-14A18-120 | TE Connectivity | KUMP-14A18-120=KU Relay & Contactor Type: General Purpose Power Relay Current Type: AC Coil Magnetic System: Monostable Contact Arrangement: 3 Form C 3PDT-CO Contact Current Rating: 15 A General Purpose Power Relay AC Monostable 3 Form C 3PDT-CO | Electromechanical Relay | Part Number: KUMP-14A18-120 | Internal Number: 8-1393116-4 | TE Connectivity RoHS : Compliant |
| 384 | ||
| AMP-1-2308345-3 | TE Connectivity | FULL METAL HOODS SIZE 4 - 3 (RAW) Connector Backshell Product Style: Shielded Connector Backshell Product Type: Backshell Primary Product Material: Zinc Body Orientation: Straight Compatible With Connector Shell Size: 4 Shielded Backshell Zinc Straight | D-Sub Backshell Size 4 | Part Number: AMP-1-2308345-3 | Internal Number: 1-2308345-3 | Alias Number: ES1306-000 | TE Connectivity RoHS : Compliant |
| 238 | ||
| KUMP-11D18-24 | TE Connectivity | KUMP-11D18-24=KU- Relay & Contactor Type: General Purpose Power Relay Current Type: DC Coil Magnetic System: Monostable Contact Arrangement: 2 Form C DPDT-CO Contact Current Rating: 15 A General Purpose Power Relay DC Monostable 2 Form C DPDT-CO | Electromechanical Relay | Part Number: KUMP-11D18-24 | Internal Number: 7-1393116-2 | TE Connectivity RoHS : Compliant |
| 194 | ||
| KUMP-11D18-12 | TE Connectivity | KUMP-11D18-12=KU Relay & Contactor Type: General Purpose Power Relay Current Type: DC Coil Magnetic System: Monostable Contact Arrangement: 2 Form C DPDT-CO Contact Current Rating: 15 A General Purpose Power Relay DC Monostable 2 Form C DPDT-CO | Electromechanical Relay | Part Number: KUMP-11D18-12 | Internal Number: 7-1393116-1 | TE Connectivity RoHS : Compliant |
| 176 | ||
| KUMP-14D18-12 | TE Connectivity | KUMP-14D18-12=KU Relay & Contactor Type: General Purpose Power Relay Current Type: DC Coil Magnetic System: Monostable Contact Arrangement: 3 Form C 3PDT-CO Contact Current Rating: 15 A General Purpose Power Relay DC Monostable 3 Form C 3PDT-CO | Electromechanical Relay | Part Number: KUMP-14D18-12 | Internal Number: 9-1393116-0 | TE Connectivity RoHS : Compliant |
| 100 | ||
| KUMP-14D18-24 | TE Connectivity | KUMP-14D18-24=KU Relay & Contactor Type: General Purpose Power Relay Current Type: DC Coil Magnetic System: Monostable Contact Arrangement: 3 Form C 3PDT-CO Contact Current Rating: 15 A General Purpose Power Relay DC Monostable 3 Form C 3PDT-CO | Electromechanical Relay | Part Number: KUMP-14D18-24 | Internal Number: 9-1393116-1 | TE Connectivity RoHS : Compliant |
| 26 | ||
![]() Vyrian | TMP12FSZ-REEL | Analog Devices Inc | Analog Voltage Output Sensor, 2.49V Min, 2.51V Max, 3Cel, Rectangular, Surface Mount RoHS : Compliant | 10,661 | ||
| SMP1330-040LF | Skyworks Solutions Inc | Pin Diode, 20V V(BR), Silicon RoHS : Compliant | 10,059 | |||
| LMS8117AMP-1-8-NOPB | Texas Instruments | 9,586 | ||||
| DSPIC33CK32MP102E/SS | Microchip Technology Inc | 16-Bit Size, 0-Ext Bit, 64MHz, CMOS, PDSO28 | 8,926 | |||
| TMP19A43FDXBG | Toshiba America Electronic Components | RISC Microprocessor, 32-Bit, 40MHz, CMOS, PBGA193 RoHS : Compliant | 8,786 | |||
| TMP12 | Analog Devices Inc | 8,449 | ||||
| TMP1075NDRLR | Texas Instruments | Serial Switch/Digital Sensor, 12 Bit(s), 1Cel, Rectangular, 6 Pin, Surface Mount RoHS : Compliant | 7,945 | |||
| LP3872EMP-1-8-NOPB | Texas Instruments | 7,289 | ||||
LP3875EMP-1.8![]() | Texas Instruments | Fixed Positive LDO Regulator, 1.8V, 0.55V Dropout, CMOS, PDSO5 RoHS : Not Compliant | 7,233 | |||
TMP123AIDBVTG4![]() | Texas Instruments | Serial Switch/Digital Sensor, 12 Bit(s), 1.5Cel, Rectangular, 6 Pin, Surface Mount RoHS : Compliant | 6,259 | |||
SMP100LC-360![]() | STMicroelectronics | Silicon Surge Protector, 450V V(BO) Max, 24A, DO-214AA RoHS : Compliant | 5,924 | |||
| PTMP1075DGKT | Texas Instruments | Serial Switch/Digital Sensor | 5,699 | |||
| LP38692MP-1-8-NOPB | Texas Instruments | 3,368 | ||||
| TMP105YZCRG4 | Texas Instruments | Serial Switch/Digital Sensor, 12 Bit(s), 3Cel, Rectangular, 6 Pin, Surface Mount RoHS : Compliant | 3,334 | |||
LM2937IMP-10X![]() | Texas Instruments | Fixed Positive LDO Regulator, 10V, 1V Dropout, PDSO4 | 3,030 | |||
![]() Win Source Electronics | DMP1100UCB4-7![]() | Diodes Incorporated | MOSFET P-CHA 12V 2.5A WLB0808 / Qualified to AEC-Q101 Standards for High Reliability RoHS : Compliant |
| 990,000 | |
TMP103AYFFT![]() | Texas Instruments | Temp Sensor Digital Serial (2-Wire, I2C, SMBus) 4-Pin DSBGA T/R / SENSOR TEMP I2C/SMBUS 4DSBGA RoHS : Compliant |
| 324,000 | ||
TMP101NA/3KG4![]() | Texas Instruments | SENSOR TEMP I2C/SMBUS SOT23-6 RoHS : Compliant |
| 110,560 | ||
TMP117MAIDRVR![]() | Texas Instruments | TEMPERATURE SENSOR RoHS : Compliant |
| 80,000 | ||
RCLAMP1654P.TCT![]() | Semtech Corporation | TVS DIODE 5.5VWM 30VC RoHS : Compliant |
| 51,000 | ||
| RCLAMP1521PQTCT | Semtech Corporation | TVS DIODE 15VWM 35VC SLP1006P2 RoHS : Compliant |
| 38,000 | ||
| TMP1075NDRLR | Texas Instruments | 1C IC TEMPERATURE SENSOR WITH PE / Temperature Sensor Digital, Local -40°C ~ 125°C 12 b SOT-563 RoHS : Compliant |
| 14,460 | ||
TMP123AIDBVTG4![]() | Texas Instruments | SENSOR DIGITAL -40C-125C SOT23-6 / 1.5 C Accurate Digital Temperature Sensor with SPI Interface RoHS : Compliant |
| 10,310 | ||
TMP123AIDBVT![]() | Texas Instruments | SENSOR TEMPERATURE SPI SOT23-6 RoHS : Compliant |
| 10,070 | ||
| SCMP13WBC8W1AT | ROHM Semiconductor |
| 10,044 | |||
| SMP1330-040LF | Skyworks Solutions Inc | DIODE LIMITER 150MA 0402 RoHS : Compliant |
| 6,000 | ||
| TMP105YZCRG4 | Burr-Brown Corp | Digital Temperature Sensor with Two-Wire Interface |
| 5,740 | ||
TMP175AIDGKT![]() | Texas Instruments | SENSOR TEMPERATURE SMBUS 8VSSOP RoHS : Compliant |
| 4,790 | ||
| MK22FN512VMP12 | Nexperia | IC MCU 32BIT 512KB FLSH 64MAPBGA |
| 2,560 | ||
| TMP126EDBVRQ1 | Texas Instruments | AUTOMOTIVE 0.25C SPI TEMPERATURE RoHS : Compliant |
| 2,515 | ||
![]() Wuhan P&S | STM32MP133FAE7 | STMicroelectronics | - RoHS : Compliant |
| 200 | |
| STM32MP157AAC3 | STMicroelectronics | Arm dual Cortex-A7 800 MHz + Cortex-M4 MPU RoHS : Compliant |
| 100 | ||
| STM32MP157F-DK2 | STMicroelectronics | - |
| 3 | ||
| STM32MP157D-DK1 | STMicroelectronics | Evaluation board |
| 3 |
| ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |