| データシートサーチシステム |
|
MP25SLASH22 販売店 |
| 販売店 | 部品番号 | メーカー | 部品情報 | Price | Qty. BuyNow | |
![]() TME | MP 25/22 | FIBOX | Mounting plate; steel; W: 175mm; L: 225mm; Thk: 1.5mm; zinc |
| 2 | |
| DMP25H18DLFDE-13 | Diodes Incorporated | Transistor: P-MOSFET; unipolar; -250V; -210mA; Idm: -1A; 1.4W RoHS : Compliant |
| 0 | ||
| MP-25043-54L | Amphenol Corporation | Protection cover; PIN: 54; internal bayonet,bayonet; plugs RoHS : Compliant |
| 0 | ||
| SMP253MA4150MTV24 | KEMET Corporation | Capacitor: paper; Y2; 1.5nF; ±20%; SMD; SMP253; 250VAC; 2000V/μs RoHS : Compliant |
| 0 | ||
| SMP253MA4470MTV24 | KEMET Corporation | Capacitor: paper; Y2; 4.7nF; ±20%; SMD; SMP253; 250VAC; 2000V/μs RoHS : Compliant |
| 0 | ||
| DMP25H18DLFDE-7 | Diodes Incorporated | Transistor: P-MOSFET; unipolar; -250V; -210mA; Idm: -1A; 1.4W RoHS : Compliant |
| 0 | ||
| MP-25042-85L | Amphenol Corporation | Protection cover; PIN: 85; external bayonet,bayonet; plugs RoHS : Compliant |
| 0 | ||
| MP-25043-19S | Amphenol Corporation | Protection cover; PIN: 19; internal bayonet,bayonet; sockets RoHS : Compliant |
| 0 | ||
| MP-25042-150L | Amphenol Corporation | Protection cover; PIN: 150; external bayonet,bayonet; plugs RoHS : Compliant |
| 0 | ||
| MP-25042-19L | Amphenol Corporation | Protection cover; PIN: 19; external bayonet,bayonet; plugs RoHS : Compliant |
| 0 | ||
| SMP253MA4100MTV24 | KEMET Corporation | Capacitor: paper; Y2; 1nF; ±20%; SMD; SMP253; 250VAC; 2000V/μs RoHS : Compliant |
| 0 | ||
| SMP253MA4330MTR24 | KEMET Corporation | Capacitor: paper; Y2; 3.3nF; ±20%; SMD; SMP253; 250VAC; 2000V/μs RoHS : Compliant |
| 0 | ||
| SMP253MA4250MTR24 | KEMET Corporation | Capacitor: paper; Y2; 2.5nF; ±20%; SMD; SMP253; 250VAC; 2000V/μs RoHS : Compliant |
| 0 | ||
| MP-25043-150L | Amphenol Corporation | Protection cover; PIN: 150; internal bayonet,bayonet; plugs RoHS : Compliant |
| 0 | ||
| SMP253MA4220MTV24 | KEMET Corporation | Capacitor: paper; Y2; 2.2nF; ±20%; SMD; SMP253; 250VAC; 2000V/μs RoHS : Compliant |
| 0 | ||
![]() Avnet Americas | RCLAMP2504N.TCT | Semtech Corporation | - Tape and Reel (Alt: RCLAMP2504N.TCT) RoHS : Not Compliant |
| 15,000 | |
| RCLAMP2574N.TCT | Semtech Corporation | ESD Protection Device, 20 V, SLP3020N10, 10 Pins, 2.5 V, 5 pF - Tape and Reel (Alt: RCLAMP2574N.TCT) RoHS : Compliant |
| 3,000 | ||
| HLMP-2550 | Broadcom Limited | LED Bar Graph Array, Green, 20 mA, 2.2 V, 50 mcd, 4 LEDs, 19.05mm x 3.81mm - Rail/Tube (Alt: HLMP-2550) RoHS : Compliant |
| 675 | ||
RCLAMP2502L.TBT![]() | Semtech Corporation | ESD Protection Device, 20 V, SOIC, 8 Pins, 2.5 V, 10 pF - Tape and Reel (Alt: RCLAMP2502L.TBT) RoHS : Not Compliant |
| 500 | ||
| MP250 | CTS Corporation | - Bulk (Alt: MP250) RoHS : Compliant |
| 200 | ||
| STM32MP257DAL3 | STMicroelectronics | Microprocessor, 2 Cores, 32-bit / 64-bit, STM32, 1.5 GHz, VFBGA, 361 Pins - Trays (Alt: STM32MP257DAL3) RoHS : Not Compliant |
| 150 | ||
| STM32MP251AAK3 | STMicroelectronics | Microprocessor, 3Cores, 32-bit, 64-bit, ARM Cortex-A35, ARM Cortex-M33, ARM Cortex-M0+, 1.2 GHz, VFBGA, 424 Pins - Bulk (Alt: STM32MP251AAK3) RoHS : Not Compliant |
| 150 | ||
| STM32MP255FAI3 | STMicroelectronics | Microprocessor, 4 Cores, 32-bit, 64-bit, ARM Cortex-A35, ARM Cortex-M33, ARM Cortex-M0+, 1.5 GHz, TFBGA - Bulk (Alt: STM32MP255FAI3) RoHS : Not Compliant |
| 150 | ||
| STM32MP255DAL3 | STMicroelectronics | Microprocessor, 4 Cores, 32-bit, 64-bit, ARM Cortex-A35, ARM Cortex-M33, ARM Cortex-M0+, 1.5 GHz, VFBGA, 361 Pins - Trays (Alt: STM32MP255DAL3) RoHS : Not Compliant |
| 150 | ||
| STM32MP253CAL3 | STMicroelectronics | Microprocessor, 4Cores, 32-bit, 64-bit, ARM Cortex-A35, ARM Cortex-M33, ARM Cortex-M0+, 1.2 GHz, VFBGA, 361 Pins - Trays (Alt: STM32MP253CAL3) RoHS : Not Compliant |
| 150 | ||
| STM32MP255DAK3 | STMicroelectronics | Microprocessor, 4 Cores, 32-bit, 64-bit, ARM Cortex-A35, ARM Cortex-M33, ARM Cortex-M0+, 1.5 GHz, VFBGA - Trays (Alt: STM32MP255DAK3) RoHS : Not Compliant |
| 146 | ||
| STM32MP253CAI3 | STMicroelectronics | Microprocessor, 4Cores, 32-bit, 64-bit, ARM Cortex-A35, ARM Cortex-M33, ARM Cortex-M0+, 1.2 GHz, TFBGA, 436 Pins - Bulk (Alt: STM32MP253CAI3) RoHS : Not Compliant |
| 135 | ||
| STM32MP257F-DK | STMicroelectronics | Discovery Board, STM32MP257FAK3, 32 / 64bit, ARM Cortex-A35/Cortex-M33F - Boxed Product (Development Kits) (Alt: STM32MP257F-DK) RoHS : Not Compliant |
| 52 | ||
| DBMP-25SJ-A197 | ITT Interconnect Solutions | - Bulk (Alt: DBMP-25SJ-A197) RoHS : Compliant | 22 | |||
| CC-WMP255-KIT | Digi International Inc | ConnectCore MP255 System On Module Development Kit - Bulk (Alt: CC-WMP255-KIT) RoHS : Not Compliant |
| 3 | ||
![]() Newark | SMP253EA4470MB31TR24 | KEMET Corporation | Suppression Cap, 4700Pf, Class Y2, 300V; |Kemet SMP253EA4470MB31TR24 RoHS : Compliant |
| 6,880 | |
| SMP253EA4470MB31TR24 | KEMET Corporation | Suppression Cap, 4700Pf, Class Y2, 300V; |Kemet SMP253EA4470MB31TR24 RoHS : Compliant |
| 6,880 | ||
| CMP2512-FX-3903ELF | Bourns Inc | Chip Res Smd, 390K, ±1%, 1.5W; |Bourns, Inc. CMP2512-FX-3903ELF RoHS : Compliant |
| 3,800 | ||
| CMP2512-FX-3903ELF | Bourns Inc | Chip Res Smd, 390K, ±1%, 1.5W; |Bourns, Inc. CMP2512-FX-3903ELF RoHS : Compliant |
| 3,800 | ||
| CMP2512-FX-3903ELF | Bourns Inc | Res, 390K, 1%, 1.5W, 2512, Thick Film; |Bourns, Inc. CMP2512-FX-3903ELF RoHS : Compliant |
| 2,569 | ||
| CMP2512-FX-3903ELF | Bourns Inc | Res, 390K, 1%, 1.5W, 2512, Thick Film; |Bourns, Inc. CMP2512-FX-3903ELF RoHS : Compliant |
| 2,569 | ||
| SMP253EA4470MB31TV24 | KEMET Corporation | Suppression Cap, 4700Pf, Class Y2, 300V; |Kemet SMP253EA4470MB31TV24 RoHS : Compliant |
| 1,210 | ||
| SMP253EA4470MB31TV24 | KEMET Corporation | Suppression Cap, 4700Pf, Class Y2, 300V; |Kemet SMP253EA4470MB31TV24 RoHS : Compliant |
| 1,210 | ||
| SMP255FB5470MC31TV44 | KEMET Corporation | Suppression Cap, 0.047Uf, Class X2, 310V; |Kemet SMP255FB5470MC31TV44 RoHS : Compliant |
| 200 | ||
| SMP255FB5470MC31TV44 | KEMET Corporation | Suppression Cap, 0.047Uf, Class X2, 310V; |Kemet SMP255FB5470MC31TV44 RoHS : Compliant |
| 200 | ||
| SMP255FB5470MC31TV44 | KEMET Corporation | Suppression Cap, 0.047Uf, Class X2, 310V; |Kemet SMP255FB5470MC31TV44 RoHS : Compliant |
| 200 | ||
| SMP255FB5470MC31TV44 | KEMET Corporation | Suppression Cap, 0.047Uf, Class X2, 310V; |Kemet SMP255FB5470MC31TV44 RoHS : Compliant |
| 200 | ||
| STM32MP257DAL3 | STMicroelectronics | Microprocessor, 1.5Ghz, Vfbga-361; |Stmicroelectronics STM32MP257DAL3 RoHS : Compliant |
| 50 | ||
| IMP-250-28 | Orion Fans | Metal Impeller, 250Mm X 28Deg, Of Motor; Pitch Angle:28°; For Use With:Oam Open Frame Motor; Blade Gauge:0.8 ± 0.03; Airflow Direction:Intake (Toward Motor); Impeller Connection:Screw; Impeller Material:Aluminium Rohs Compliant: Yes |Orion Fans IMP-250-28 RoHS : Compliant |
| 18 | ||
| BMS-K-2-C70-MP-25.4 | Labfacility Limited | Magnet, T/C, K, 2M + Plug, 3Kg Pull; |Labfacility BMS-K-2-C70-MP-25.4 RoHS : Compliant |
| 2 | ||
![]() RS | MP250-M | Panduit Corp | HARNESS IDENTIFICATION MARKER PLATE, 2.50" X 0.75"(63.5MM X 19.1MM), WHITE |
| 900 | |
| MP25-2 | Custom Connector Corporation | ACCESSORY, RELAY SOCKET, HOLD DOWN SPRING, PLASTIC, FOR 25MM HIGH RELAYS |
| 100 | ||
| MP250W175-C | Panduit Corp | PRINTER TAPE, CARTRIDGE / CASSETTE, WHITE, NYLON 6.6, LENGTH 63.5MM RoHS : Compliant |
| 96 | ||
| MP250-C | Panduit Corp | MARKER PLATE, 2.50" X 0.75"(63.5MM X 19. |
| 95 | ||
| 62MP2500 | Essentra Components | HOLE PLUG, SNAP IN, 2.500 IN HOLE, .250 MAX PANEL |
| 78 | ||
| IMP-250-28 | Orion Fans | METAL IMPELLER, FOR OAM OPEN FRAME MOTOR, 250MM X 28 DEGREE PITCH ANGLE |
| 20 | ||
| IMP-250-34 | Orion Fans | METAL IMPELLER, FOR OAM OPEN FRAME MOTOR, 250MM X 34 DEGREE PITCH ANGLE |
| 20 | ||
| IMP-250-22 | Orion Fans | METAL IMPELLER, FOR OAM OPEN FRAME MOTOR, 250MM X 22 DEGREE PITCH ANGLE |
| 20 | ||
| CMP250PS24 | XP Power | POWER SUPPLY AC-DC 24V@10.4A 5V@1.5A 12V@0.6A 80-264V IN OPEN FRAME MEDICAL 250W RoHS : Compliant |
| 8 | ||
| CMP250PS48 | XP Power | POWER SUPPLY AC-DC 48V@5.2A 5V@1.5A 12V@0.6A 80-264V IN OPEN FRAME MEDICAL 250W RoHS : Compliant |
| 3 | ||
| JUMP250 | Mersen Electrical Power | JUMBER BAR FOR MERSEN 250A DC DISCONMNECT SWITCH |
| 2 | ||
| 50LMP-25WH | Edwards Signaling | LAMP, HALOGEN,25W,105 SERIES REPLACEMENT, BEACON, TRADE NUMBER 25T8DC |
| 1 | ||
| LW6MP-25MA | IDEC Corporation | PANEL MOUNT INDICATOR 25MM PILOT LIGHT AMBER |
| 1 | ||
| MP2.5X1/4X4X1FF-DR | Fabco-Air | PANCAKE CYLINDER |
| 1 | ||
| PUMP2500.TUBE | FAG Bearings | MAINTENANCE PRODUCTS |
| 0 | ||
![]() Rochester Electronics | LP3855EMP2.5/NOPB | Texas Instruments | IC VOLT REG Fixed 1 REG 2.5V 1.5A SOT223 T/R RoHS : Compliant |
| 96 | |
LP3965EMP-2.5![]() | Texas Instruments | Fixed Positive LDO Regulator, 2.5V, 0.55V Dropout, BICMOS, PDSO5 RoHS : Not Compliant |
| 5,274 | ||
LP38693MP-2.5/NOPB![]() | Texas Instruments | IC VOLT REG Fixed 1 REG 2.5V 500mA SOT223 T/R RoHS : Compliant |
| 253 | ||
LP38692MP-2.5![]() | Texas Instruments | Fixed Positive LDO Regulator, 2.5V, 1.3V Dropout, CMOS, PDSO5 RoHS : Not Compliant |
| 16,000 | ||
LP3964EMP-2.5![]() | Texas Instruments | Fixed Positive LDO Regulator, 2.5V, 0.35V Dropout, CMOS, PDSO5 RoHS : Not Compliant |
| 1,000 | ||
| LP3855EMP-2.5/NOPB | National Semiconductor Corporation | IC VOLT REG Fixed 1 REG 2.5V 1.5A SOT223 T/R RoHS : Compliant |
| 5,396 | ||
| LP38692MP-2.5 | National Semiconductor Corporation | Fixed Positive LDO Regulator, 2.5V, 1.3V Dropout, CMOS, PDSO5 RoHS : Not Compliant |
| 5,729 | ||
| LP38693MP-2.5/NOPB | National Semiconductor Corporation | IC VOLT REG Fixed 1 REG 2.5V 500mA SOT223 T/R RoHS : Compliant |
| 174 | ||
| LP3874EMP-2.5 | National Semiconductor Corporation | Fixed Positive LDO Regulator, 2.5V, 0.35V Dropout, CMOS, PDSO5 RoHS : Not Compliant |
| 965 | ||
| LP3874EMP-2.5/NOPB | National Semiconductor Corporation | IC VOLT REG Fixed 1 REG 2.5V 1.5A SOT223 T/R RoHS : Compliant |
| 554 | ||
| LP3962EMP-2.5/NOPB | National Semiconductor Corporation | IC VOLT REG Fixed 1 REG 2.5V 1.5A SOT223 T/R RoHS : Compliant |
| 1,230 | ||
| LP3964EMP-2.5 | National Semiconductor Corporation | Fixed Positive LDO Regulator, 2.5V, 0.35V Dropout, CMOS, PDSO5 RoHS : Not Compliant |
| 8,290 | ||
| ECLAMP2508K.TCT | Semtech Corporation | EMI Filter LC (Pi) 250MHz L = 17nH, C = 12pF T/R RoHS : Compliant |
| 6,000 | ||
RCLAMP2502L.TBT![]() | Semtech Corporation | TVS Diode Steering (Rail to Rail) Uni-Directional 2.5V (Max) 20V 8-SOIC T/R RoHS : Compliant |
| 65 | ||
| RCLAMP2574N.TCT | Semtech Corporation | TVS Diode Steering (Rail to Rail) Uni-Directional 2.5V (Max) 20V 10-SON T/R RoHS : Compliant |
| 19,809 | ||
![]() Sager | MMP-25RM-1-CHP | TE Connectivity | TE Connectivity MMP-25RM-1-CHP | 0 | ||
| IMP2.510C2 | HellermannTyton | IDENTIFICATION MARKER PLATE, 2.5 X .75, NYLON, WHITE, 100/PKG |
| 0 | ||
| PMP250-13 | TT Electronics / Power Partners | Desktop AC Adapters |
| 0 | ||
| LW6MP-25MY | IDEC Corporation | Pushbutton Switches 25mm Pilot Light Yellow |
| 0 | ||
| PMP250-12 | TT Electronics / Power Partners | Desktop AC Adapters |
| 0 | ||
| PMP250-18 | TT Electronics / Power Partners | Desktop AC Adapters |
| 0 | ||
| MP-254097-10-8A | TE Connectivity | Printers MP 1/.38 LABEL PRICE PER LABEL RoHS : Compliant |
| 0 | ||
| 104-MP2.5S | TE Connectivity | TE Connectivity | 0 | |||
| MP250W175-C | Panduit Corp | Wire Labels & Markers HARNESS IND MRKR PLATE 2.5 RoHS : Compliant |
| 0 | ||
| PMP250-16 | TT Electronics / Power Partners | Desktop AC Adapters |
| 0 | ||
| PMP250-19 | TT Electronics / Power Partners | Desktop AC Adapters |
| 0 | ||
| 117-MP2.5X | TE Connectivity | TE Connectivity | 0 | |||
| PMP250-14 | TT Electronics / Power Partners | Desktop AC Adapters |
| 0 | ||
| IMP2.510M4 | HellermannTyton | IDENTIFICATION MARKER PLATE, 2.5 X .75, NYLON, WHITE, 1000/PKG |
| 0 | ||
| MP-254064-10-8A | TE Connectivity | Labels and Industrial Warning Signs MP 1/.25 LABEL PRICE PER LABEL RoHS : Compliant |
| 0 | ||
![]() Ameya Holding Limited | LP38692MP-2.5/NOPB![]() | Texas Instruments | LP38692MP-2.5/NOPB , LDO 电压调节器, 1A, 2.5 V输出 ±2.5%, 2.7 → 10 V输入, 5针 SOT-223封装 RoHS : Compliant | 27,872 | ||
LP3965EMP-2.5/NOPB![]() | Texas Instruments | LP3965EMP-2.5/NOPB , LDO 电压调节器, 1.5A, 2.5 V输出 ±1.5%, 2.5 → 7 V输入, 5针 SOT-223封装 RoHS : Compliant | 26,315 | |||
LP38693MP-2.5/NOPB![]() | Texas Instruments | SOT-223/500MA LDO RoHS : Compliant | 11,977 | |||
LP3875EMP-2.5/NOPB![]() | Texas Instruments | SOT223-5/A°/1.5A Fast Ultra Low Dropout Linear Regulators RoHS : Compliant | 11,281 | |||
LM2937IMP-2.5/NOPB![]() | Texas Instruments | SOT-223//400MA LDO REGULATOR RoHS : Compliant | 10,000 | |||
| WSMP2512FR025FT0 | FSHY | 4,000 | ||||
LP3961EMP-2.5/NOPB![]() | Texas Instruments | LP3961EMP-2.5/NOPB , LDO 电压调节器, 0.8A, 2.5 V输出 ±1.5%, 2.5 → 7 V输入, 5针 SOT-223封装 RoHS : Compliant | 811 | |||
![]() ComSIT USA | LM1117MP25NOPB | National Semiconductor Corporation | 800 MILLIAMP LOW-DROPOUT LINEAR REGULATOR Fixed Positive LDO Regulator, 2.5V, 1.3V Dropout, BIPolar, PDSO4 RoHS : Compliant | 2,448 | ||
| HLMP2500FG000CATFBIN4 | Avago Technologies | LED LT BAR 8.89X3.81MM SGL GREEN RoHS : Compliant | 1,390 | |||
| LM2937IMP25NOPB | National Semiconductor Corporation | 400 MILLIAMP VOLTAGE REGULATOR Fixed Positive LDO Regulator, 2.5V, BIPolar, PDSO4 RoHS : Compliant | 1,000 | |||
| HLMP2500CATG | Avago Technologies | Visible LED RoHS : Compliant | 980 | |||
| LM1117MP25 | National Semiconductor Corporation | 800 MILLIAMP LOW-DROPOUT LINEAR REGULATOR Fixed Positive LDO Regulator, 2.5V, 1.3V Dropout, BIPolar, PDSO4 RoHS : Compliant | 975 | |||
| 4283SMP2520001 | ims | Electronic Component RoHS : Not Compliant | 610 | |||
| HLMP2500CATF | Avago Technologies | LED LIGHT BAR Single Color LED, High Performance Green, 8.89mm RoHS : Compliant | 360 | |||
| HLMP2500CATGBIN3 | Agilent Technologies Inc | Electronic Component RoHS : Not Compliant | 330 | |||
| HLMP2550CATG | Avago Technologies | Visible LED RoHS : Compliant | 320 | |||
| LP3871EMP25NOPB | Texas Instruments | LDO Regulator Pos 2.5V 0.8A 5-Pin(4+Tab) SOT-223 T/R RoHS : Compliant | 96 | |||
| HLMP2550CATF | Avago Technologies | LED LIGHT BAR Single Color LED, High Performance Green, 19.05mm RoHS : Not Compliant | 90 | |||
| HLMP2500FG000CATGBIN4 | Avago Technologies | LED LT BAR 8.89X3.81MM SGL GREEN RoHS : Compliant | 80 | |||
| HLMP2550G3 | Hewlett Packard Co | LED LIGHT BAR Single Color LED, High Performance Green, 19.05mm RoHS : Not Compliant | 60 | |||
| HLMP2500G | Avago Technologies | Visible LED RoHS : Not Compliant | 21 | |||
| HLMP2550F3 | Hewlett Packard Co | LED LIGHT BAR Single Color LED, High Performance Green, 19.05mm RoHS : Not Compliant | 16 | |||
![]() GLYN GmbH & Co. KG | TXMP-2550 | Ka-Ro electronics GmbH | Computer On Module - STM32MP255 Dual Core A35, 1. | 8 | ||
| TXMP-2570 | Ka-Ro electronics GmbH | Computer On Module - STM32MP257 Dual Core A35, 1. | 1 | |||
![]() Interstate Connecting Components | MP-25042-54S | Amphenol Sine Systems | DUST CAP FOR M-4106 SERIES 54 | 0 | ||
| MP-254097-10-8A | TE Connectivity | MP-254097-10-8A RoHS : Compliant | 0 | |||
| DBMMP-25P-F | ITT Interconnect Solutions | D-SUB PLUG 25C PIN RoHS : Not Compliant |
| 0 | ||
| DBMMP-25P-F | ITT Interconnect Solutions | DBMMP-25P-F RoHS : Not Compliant | 0 | |||
| MP-25042-25S | Amphenol Sine Systems | DUST CAP FOR M-4106 SERIES 25 | 0 | |||
| DCMP-25C3S-J-K126 | ITT Interconnect Solutions | DCMP25C3SJK126 | 0 | |||
| MP-25043-13S | Amphenol Sine Systems | DUST CAP FOR M-4101 SERIES 13 | 0 | |||
| DCMP-25C3S-J-A197 | ITT Interconnect Solutions | DCMP25C3SJA197 RoHS : Compliant | 0 | |||
| MP-254064-10-8A | TE Connectivity | A83632-000 RoHS : Compliant |
| 0 | ||
| DBMMP-25S-F | ITT Interconnect Solutions | DBMMP-25S-F RoHS : Not Compliant | 0 | |||
| MP-25043-13L | Amphenol Sine Systems | DUST CAP FOR M-4101 SERIES 13 | 0 | |||
| DCMP-25C3P-J-K87 | ITT Interconnect Solutions | DCMP25C3PJK87 RoHS : Compliant | 0 | |||
| DCMP-25X3S-J-A197 | ITT Interconnect Solutions | DCMP25X3SJA197 RoHS : Compliant | 0 | |||
| MP-25042-150L | Amphenol Sine Systems | DUST CAP FOR M-4106 SERIES 150 | 0 | |||
| MP-25042-19L | Amphenol Sine Systems | DUST CAP FOR M-4106 SERIES 19 | 0 | |||
![]() NexGen Digital | LP3965EMP-2.5 | National Semiconductor Corporation | RoHS : Not Compliant | 517 | ||
![]() PEI Genesis | DBMP25PJK87 | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | |
| DBMP25PJA101 | ITT Interconnect Solutions |
| 0 | |||
| DBMMP25PJ | ITT Interconnect Solutions |
| 0 | |||
| DBMP25PJK127 | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
| DBMMP25PP | ITT Interconnect Solutions |
| 0 | |||
| DBMMP25S | ITT Interconnect Solutions |
| 0 | |||
| DBMP25PP | ITT Interconnect Solutions |
| 0 | |||
| DBMMP25PJA101 | ITT Interconnect Solutions |
| 0 | |||
| DBMMP25PFF225 | ITT Interconnect Solutions |
| 0 | |||
| DCMMP25H3PJ | ITT Interconnect Solutions | RoHS : Not Compliant |
| 0 | ||
| DCMP25W3PJK87 | ITT Interconnect Solutions |
| 0 | |||
| DCMP25X3SJA197 | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
| DBMP25SJA197 | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
| DCMP25C3PJK87 | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
| DBMP25PJ | ITT Interconnect Solutions |
| 0 | |||
![]() Powell Electronics | MP-25043-54L | Amphenol Corporation | Connector RoHS : Compliant |
| 5 | |
| MP-25043-13S | Amphenol Corporation | Connector RoHS : Compliant |
| 3 | ||
| MP-25042-150L | Amphenol Corporation | Connector RoHS : Compliant |
| 3 | ||
| MP-25042-19S | Amphenol Corporation | Connector RoHS : Compliant |
| 2 | ||
| 1489MP25 | Hammond Manufacturing | 25PB 22MM 15X14X6 |
| 1 | ||
| MP-25043-25S | Amphenol Corporation | Connector RoHS : Compliant |
| 1 | ||
| MP-25043-19S | Amphenol Corporation | Connector RoHS : Compliant |
| 1 | ||
| MP-25043-150L | Amphenol Corporation | Connector RoHS : Compliant |
| 1 | ||
![]() PUI | EKMM401VNN680MP25U | United Chemi-Con Inc | RoHS : Compliant | 200 | ||
![]() Chip 1 Exchange | LP3962EMP-2,5 | INSTOCK | 39,635 | |||
| EKMS201VSN391MP25S | Chemi-Con | INSTOCK RoHS : Compliant | 3,300 | |||
| LP3872EMP-2.5 | National Semiconductor Corporation | INSTOCK RoHS : Not Compliant | 2,956 | |||
| HLMP 2500 | INSTOCK | 1,742 | ||||
| MP25VS27MC5R7 | INSTOCK | 1,000 | ||||
| LM1117MP-2.5 | INSTOCK | 777 | ||||
| HLMP-2550 | INSTOCK | 748 | ||||
| HLMP-2500 | Broadcom Limited | INSTOCK RoHS : Compliant | 492 | |||
| EKMS201VSN391MP25S | Chemi-Con | INSTOCK RoHS : Compliant | 120 | |||
| MP2506W | ELITE | INSTOCK | 80 | |||
| EKMH160VSN682MP25T | United Chemi-Con Inc | INSTOCK | 1 | |||
![]() Avnet Abacus | SMP253EA4330MB31TR24 | KEMET Corporation | - Tape and Reel (Alt: SMP253EA4330MB31TR24) RoHS : Compliant | 1,200 | ||
| SMP253MA4390MTR24 | KEMET Corporation | - Tape and Reel (Alt: SMP253MA4390MTR24) RoHS : Compliant | 0 | |||
| SMP253MA4250MTV24 | KEMET Corporation | Safety Capacitor Metallized Paper 5045 127114 Metric 2500 pF 20 Y2 Surface Mount 250 VAC (Alt: SMP253MA4250MTV24) RoHS : Compliant | 0 | |||
| CMP2512-FX-3903ELF | Bourns Inc | - Tape and Reel (Alt: CMP2512-FX-3903ELF) RoHS : Compliant | 0 | |||
| CMP2512AFX-47R0ELF | Bourns Inc | - Tape and Reel (Alt: CMP2512AFX-47R0ELF) RoHS : Compliant | 0 | |||
| CMP2512AFX-5602ELF | Bourns Inc | - Tape and Reel (Alt: CMP2512AFX-5602ELF) RoHS : Compliant | 0 | |||
| CMP2512-FX-1003ELF | Bourns Inc | - Tape and Reel (Alt: CMP2512-FX-1003ELF) RoHS : Compliant | 0 | |||
| CMP2512AFX-1004ELF | Bourns Inc | - Tape and Reel (Alt: CMP2512AFX-1004ELF) RoHS : Compliant | 0 | |||
| CMP2512AFX-10R0ELF | Bourns Inc | - Tape and Reel (Alt: CMP2512AFX-10R0ELF) RoHS : Compliant | 0 | |||
| SMP253EA4470MB31TR24 | KEMET Corporation | - Tape and Reel (Alt: SMP253EA4470MB31TR24) RoHS : Compliant | 0 | |||
| SMP253EA4470MB31TV24 | KEMET Corporation | - Tape and Reel (Alt: SMP253EA4470MB31TV24) RoHS : Compliant | 0 | |||
| SMP255FB5470MC31TV44 | KEMET Corporation | SMP255 Film Metallized Paper Auto Safety Class X2 310 VAC X2 630 VDC 47nF 20 125C (Alt: SMP255FB5470MC31TV44) RoHS : Compliant | 0 | |||
| SMP255FA5120MB31TV24 | KEMET Corporation | SMP255 Film Metallized Paper Auto Safety Class X2 310 VAC X2 630 VDC 12 nF 20 125C (Alt: SMP255FA5120MB31TV24) RoHS : Compliant | 0 | |||
| SMP255FB5680MC31TV44 | KEMET Corporation | SMP255 Film Metallized Paper Auto Safety Class X2 310 VAC X2 630 VDC 68nF 20 125C (Alt: SMP255FB5680MC31TV44) RoHS : Compliant | 0 | |||
| SMP253EA4150MB31TV24 | KEMET Corporation | - Tape and Reel (Alt: SMP253EA4150MB31TV24) RoHS : Compliant | 0 | |||
![]() Avnet Asia | RCLAMP2574NQTCT | Semtech Corporation | (Alt: RCLAMP2574NQTCT) RoHS : Compliant | 0 | ||
| RCLAMP2504N.TCT | Semtech Corporation | (Alt: RCLAMP2504N.TCT) RoHS : Compliant | 0 | |||
| UCLAMP2511T.TCT | Semtech Corporation | Diode TVS Single Bi-Dir 2.5V 40W 2-Pin SLP1006P2 T/R (Alt: UCLAMP2511T.TCT) RoHS : Compliant | 0 | |||
![]() Avnet Silica | AP2132BMP-2.5TRG1![]() | Diodes Incorporated | LDO Voltage Regulator Fixed 14 to 55 V in 300 mV Drop 25 V2 A out PSOP88 (Alt: AP2132BMP-2.5TRG1) RoHS : Compliant | 4,000 | ||
| ECLAMP2522P.TCT | Semtech Corporation | Diode TVS Quad BiDir 55V 6Pin SLP EP TR (Alt: ECLAMP2522P.TCT) RoHS : Compliant | 3,000 | |||
| STM32MP257FAI3 | STMicroelectronics | STM32MP257FAI3 (Alt: STM32MP257FAI3) RoHS : Compliant | 300 | |||
| STM32MP255CAK3 | STMicroelectronics | Microcontrollers Microprocesso (Alt: STM32MP255CAK3) RoHS : Compliant | 238 | |||
| STM32MP257DAL3 | STMicroelectronics | STM32MP (Alt: STM32MP257DAL3) RoHS : Compliant | 168 | |||
| STM32MP257F-DK | STMicroelectronics | Discovery Board STM32MP257FAK3 32 64bit ARM CortexA35CortexM33F (Alt: STM32MP257F-DK) RoHS : Compliant | 9 | |||
| MP2565DQ-LF-P | Monolithic Power Systems | Conv DCDC Single Step Down 45V 50V 10Pin QFN TR (Alt: MP2565DQ-LF-P) RoHS : Compliant | 0 | |||
| STM32MP253AAI3 | STMicroelectronics | Microprocessor 4 Cores 32bit 64bit ARM CortexA35 ARM CortexM33 ARM CortexM0 12 GHz TFBGA (Alt: STM32MP253AAI3) RoHS : Compliant | 0 | |||
| STM32MP251CAK3 | STMicroelectronics | Microprocessor 3 Cores 32bit 64bit ARM CortexA35 ARM CortexM33 ARM CortexM0 12 GHz VFBGA (Alt: STM32MP251CAK3) RoHS : Compliant | 0 | |||
| STM32MP251DAL3 | STMicroelectronics | Microprocessor 3 Cores 32bit 64bit ARM CortexA35 ARM CortexM33 ARM CortexM0 15 GHz VFBGA (Alt: STM32MP251DAL3) RoHS : Compliant | 0 | |||
| STM32MP255CAI3 | STMicroelectronics | Microprocessor 4 Cores 32bit 64bit ARM CortexA35 ARM CortexM33 ARM CortexM0 12 GHz TFBGA (Alt: STM32MP255CAI3) RoHS : Compliant | 0 | |||
| STM32MP251DAK3 | STMicroelectronics | Microprocessor 3 Cores 32bit 64bit ARM CortexA35 ARM CortexM33 ARM CortexM0 15 GHz VFBGA (Alt: STM32MP251DAK3) RoHS : Compliant | 0 | |||
| STM32MP253AAL3 | STMicroelectronics | Microprocessor 4 Cores 32bit 64bit ARM CortexA35 ARM CortexM33 ARM CortexM0 12 GHz VFBGA (Alt: STM32MP253AAL3) RoHS : Compliant | 0 | |||
| STM32MP251AAK3 | STMicroelectronics | STM32MP251AAK3 (Alt: STM32MP251AAK3) RoHS : Compliant | 0 | |||
RCLAMP2502L.TBT![]() | Semtech Corporation | ESD Protection Device 20 V SOIC 8 Pins 25 V 10 pF (Alt: RCLAMP2502L.TBT) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | CC-WMP255-KIT | Digi International Inc | ConnectCore MP255 Development Kit incl. dev board with ConnectCore MP255 Dual, 8GB eMMC, 1GB DDR4, Wireless SOM RoHS : Compliant |
| 0 | |
![]() Chip-Germany GmbH | LM2937IMP-2.5/NOPB | National Semiconductor Corporation | RoHS : Compliant | 5 | ||
![]() Component Electronics, Inc | LP38693MP-2.5/NOPB | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 1,000 | |
| LM2937IMP-2.5 | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 847 | ||
| HLMP-2500-S22 | Agilent Technologies Inc | IN STOCK SHIP TODAY |
| 269 | ||
| LP3961EMP-2.5 | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 200 | ||
| HLMP-2500 | Agilent Technologies Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 120 | ||
| ESMH500VSN222MP25T | Chemi-Con | IN STOCK SHIP TODAY RoHS : Compliant |
| 80 | ||
| EKMQ351VSN121MP25S | United Chemi-Con Inc | IN STOCK SHIP TODAY | 62 | |||
| 684JMP250 | IN STOCK SHIP TODAY |
| 46 | |||
| HLMP-2500 | Hewlett Packard Co | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 35 | ||
| MP250 | CTS Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 25 | ||
| LP3964EMP-2.5/NOPB | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 14 | ||
| HLMP-2550 | Agilent Technologies Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 10 | ||
LP3965EMP-2.5/NOPB![]() | Texas Instruments | IN STOCK SHIP TODAY RoHS : Compliant |
| 6 | ||
![]() DB Roberts | 22MP25031W | Essentra Components | SNAP BUSHING, 2.500 HOLE, 1.96 | 0 | ||
| 62MP2500 | Essentra Components | 0 | ||||
| 62MP2500N | Essentra Components | HOLE PLUG, SNAP IN, 2.500 IN H | 0 | |||
| 62MP2500W | Essentra Components | 0 | ||||
| 22MP25031 | Essentra Components | SNAP BUSHING, 2.500 HOLE, 1.96 | 0 | |||
![]() EBV Elektronik | HLMP-2500 | Broadcom Limited | LED Single Color Light Bar Green 571nm 30mA 4Pin SIP Tube (Alt: HLMP-2500) RoHS : Compliant | 1,280 | ||
| HLMP-2500-GH000 | Broadcom Limited | LED Single Light Bar Green 571nm 30mA 4Pin SIP Tube (Alt: HLMP-2500-GH000) RoHS : Compliant | 320 | |||
| STM32MP257DAL3 | STMicroelectronics | STM32MP (Alt: STM32MP257DAL3) RoHS : Compliant | 0 | |||
| STM32MP255CAI3 | STMicroelectronics | Microprocessor 4 Cores 32bit 64bit ARM CortexA35 ARM CortexM33 ARM CortexM0 12 GHz TFBGA (Alt: STM32MP255CAI3) RoHS : Compliant | 0 | |||
| STM32MP253AAL3 | STMicroelectronics | Microprocessor 4 Cores 32bit 64bit ARM CortexA35 ARM CortexM33 ARM CortexM0 12 GHz VFBGA (Alt: STM32MP253AAL3) RoHS : Compliant | 0 | |||
| STM32MP251AAK3 | STMicroelectronics | STM32MP251AAK3 (Alt: STM32MP251AAK3) RoHS : Compliant | 0 | |||
| STM32MP253FAL3 | STMicroelectronics | LFBGA448AMicroprocessor Cortex STM32 Family STM32MP1 Series 32bit 650MHz 118V to 125V (Alt: STM32MP253FAL3) RoHS : Compliant | 0 | |||
| STM32MP257DAK3 | STMicroelectronics | STM32MP (Alt: STM32MP257DAK3) RoHS : Compliant | 0 | |||
| STM32MP253CAJ3 | STMicroelectronics | STM32MP (Alt: STM32MP253CAJ3) RoHS : Compliant | 0 | |||
| STM32MP257AAK3 | STMicroelectronics | Microprocessor 4 Cores 32bit 64bit ARM CortexA35 ARM CortexM33 ARM CortexM0 12 GHz VFBGA (Alt: STM32MP257AAK3) RoHS : Compliant | 0 | |||
| STM32MP255FAI3 | STMicroelectronics | Microprocessor 4 Cores 32bit 64bit ARM CortexA35 ARM CortexM33 ARM CortexM0 15 GHz TFBGA (Alt: STM32MP255FAI3) RoHS : Compliant | 0 | |||
| STM32MP257CAK3 | STMicroelectronics | Microprocessor 4 Cores 32bit 64bit ARM CortexA35 ARM CortexM33 ARM CortexM0 12 GHz VFBGA (Alt: STM32MP257CAK3) RoHS : Compliant | 0 | |||
| STM32MP253FAK3 | STMicroelectronics | Microprocessor 4 Cores 32bit 64bit ARM CortexA35 ARM CortexM33 ARM CortexM0 15 GHz VFBGA (Alt: STM32MP253FAK3) RoHS : Compliant | 0 | |||
| STM32MP255CAL3 | STMicroelectronics | STM32MP (Alt: STM32MP255CAL3) RoHS : Compliant | 0 | |||
| STM32MP255CAK3T | STMicroelectronics | (Alt: STM32MP255CAK3T) RoHS : Compliant | 0 | |||
![]() Maritex | TACTDF52H16MP250-JL | Jialong | Tact Switch; SMD; dimensions 5.2x5.2; h=1.5mm; dust-proof; operating force 250gf; button: round |
| 2,972 | |
![]() Master Electronics | IMP2.510C2 | HellermannTyton | Identification Marker Plate 2.5 x .75 Nylon White 100/pkg RoHS : Compliant |
| 200 | |
| CMP2512Q-J | Bourns Inc | RoHS : Compliant |
| 0 | ||
| EKHV3H1VSN171MP25S | United Chemi-Con Inc | RoHS : Compliant |
| 0 | ||
| EKMM421VSN820MP25S | United Chemi-Con Inc | Cap Aluminum Lytic 82uF 420V 20% (22 X 25mm) Snap-In 10mm 640mA 3000h 105A°C RoHS : Compliant |
| 0 | ||
| EKMT451VSN820MP25S | United Chemi-Con Inc | Aluminum Electrolytic Capacitors - Snap In 450Volts 82uF 22X25 RoHS : Compliant |
| 0 | ||
| CMP2512-FX-3903ELF | Bourns Inc | Res Thick Film 2512 390K Ohm 1% 1.5W ±100ppm/C Pad SMD T/R RoHS : Compliant |
| 0 | ||
| LW6MP-25MY | IDEC Corporation | 25MM PILOT LIGHT YELLOW RoHS : Compliant |
| 0 | ||
| ESMM251VSN271MP25S | United Chemi-Con Inc | Cap Aluminum Lytic 270uF 250V 20% (22 X 25mm) Snap-In 10mm 1500mA 3000h 85A°C RoHS : Compliant |
| 0 | ||
| ESMQ451VSN820MP25S | United Chemi-Con Inc | Cap Aluminum Lytic 82uF 450V 20% (22 X 25mm) Snap-In 10mm 830mA 2000h 85A°C RoHS : Compliant |
| 0 | ||
| EKHX401VSN151MP25S | United Chemi-Con Inc | RoHS : Compliant |
| 0 | ||
| CMP2512AFX-47R0ELF | Bourns Inc | SMD Chip Resistor 47 Ohm ± 1% 1.5 W 2512 [6332 Metric] Thick Film Anti-Surge High Power RoHS : Compliant |
| 0 | ||
| CMP2512QJW-222ELF | Bourns Inc | Res Thick Film 2512 2.2K Ohm 5% 1.5W ±200ppm/C Pad SMD T/R Automotive AEC-Q200 RoHS : Compliant |
| 0 | ||
| MP-254097-10-8A | TE Connectivity | Labels Thermal Transfer Printable Label Polyester Matte Silver 25.4x9.7mm RoHS : Compliant |
| 0 | ||
| EKMH630VSN122MP25U | United Chemi-Con Inc | KMH Series 63 V 1200 uF ˜35x25mm Snap-In Aluminum Electrolytic Capacitor RoHS : Compliant |
| 0 | ||
| EKMM251VSN151MP25S | United Chemi-Con Inc | RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3MP2542 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm. 3-Lug TRB Jack to Jack for 78 Ohm PE-30-02003 Cable., Radio frequency assembly 3-Lug TRB jack to jack for 78 Ohm PE-30-02003 cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3-Lug TRB jack to jack for 78 Ohm PE-30-02003 cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a jack gender on end 1 and jack on end 2. PE3MP2542 can also be known as a 1553 TRB female to TRB female cable assembly and will be shipped same-day as it is purchased. TRB female to TRB female cable assembly PE3MP2542 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB jack to TRB jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRB female to TRB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 3-Lug TRB jack to jack for 78 Ohm PE-30-02003 cable. | 10 | ||
| PE3MP2540 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02001, RF Cable Type: 30-02001, RF Cable Impedance: 78 Ohm. Bend Relief 3-Lug TRB Jack to Jack for 78 Ohm PE-30-02001 Cable., Radio frequency assembly bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02001 cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02001 cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a jack gender on end 1 and jack on end 2. PE3MP2540 can also be known as a 1553 TRB female to TRB female cable assembly and will be shipped same-day as it is purchased. TRB female to TRB female cable assembly PE3MP2540 is built with 30-02001 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 400 MHz maximum frequency TRB jack to TRB jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRB female to TRB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02001 cable. | 5 | |||
| PE3MP2544 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm. Bend Relief 3-Lug TRB Jack with Blunt Cut for 78 Ohm PE-30-02003 Cable., Radio frequency assembly bend relief 3-Lug TRB jack with blunt cut for 78 Ohm PE-30-02003 cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Bend relief 3-Lug TRB jack with blunt cut for 78 Ohm PE-30-02003 cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a jack gender on end 1 and genderless on end 2. PE3MP2544 can also be known as a 1553 TRB female to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB female to blunt cut genderless cable assembly PE3MP2544 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB jack to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2544 can also be used in the other direction and will be blunt cut genderless to TRB jack cable assembly if the opposite connectivity is required. 1553 TRB female to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this bend relief 3-Lug TRB jack with blunt cut for 78 Ohm PE-30-02003 cable. | 5 | |||
| PE3MP2542-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm, Length, Max: 12 inches. 3-Lug TRB Jack to Jack for 78 Ohm PE-30-02003, 12" Cable., Radio frequency assembly 3-Lug TRB jack to jack for 78 Ohm PE-30-02003, 12" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3-Lug TRB jack to jack for 78 Ohm PE-30-02003, 12" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a jack gender on end 1 and jack on end 2. PE3MP2542-12 can also be known as a 1553 TRB female to TRB female cable assembly and will be shipped same-day as it is purchased. TRB female to TRB female cable assembly PE3MP2542-12 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB jack to TRB jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRB female to TRB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 3-Lug TRB jack to jack for 78 Ohm PE-30-02003, 12" cable. |
| 2 | ||
| PE3MP2542-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm, Length, Max: 36 inches. 3-Lug TRB Jack to Jack for 78 Ohm PE-30-02003, 36" Cable., Radio frequency assembly 3-Lug TRB jack to jack for 78 Ohm PE-30-02003, 36" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3-Lug TRB jack to jack for 78 Ohm PE-30-02003, 36" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a jack gender on end 1 and jack on end 2. PE3MP2542-36 can also be known as a 1553 TRB female to TRB female cable assembly and will be shipped same-day as it is purchased. TRB female to TRB female cable assembly PE3MP2542-36 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB jack to TRB jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRB female to TRB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 3-Lug TRB jack to jack for 78 Ohm PE-30-02003, 36" cable. |
| 2 | ||
| PE3MP2547-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Solder, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Blunt Cut Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02002, RF Cable Type: PE-30-02002, RF Cable Impedance: 78 Ohm, Length, Max: 60 inches. Bend Relief 3-Lug TRB Jack with Blunt Cut for 78 Ohm PE-30-02002, 60" Cable., Radio frequency assembly bend relief 3-Lug TRB jack with blunt cut for 78 Ohm PE-30-02002, 60" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Bend relief 3-Lug TRB jack with blunt cut for 78 Ohm PE-30-02002, 60" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB solder cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a jack gender on end 1 and blunt cut genderless on end 2. PE3MP2547-60 can also be known as a 1553 TRB female to blunt cut blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB female to blunt cut blunt cut genderless cable assembly PE3MP2547-60 is built with PE-30-02002 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 10 MHz maximum frequency TRB jack solder to blunt cut blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2547-60 can also be used in the other direction and will be blunt cut blunt cut genderless to TRB jack solder cable assembly if the opposite connectivity is required. 1553 TRB female solder to blunt cut blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this bend relief 3-Lug TRB jack with blunt cut for 78 Ohm PE-30-02002, 60" cable. |
| 2 | ||
| PE3MP2547-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Solder, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Blunt Cut Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02002, RF Cable Type: PE-30-02002, RF Cable Impedance: 78 Ohm, Length, Max: 48 inches. Bend Relief 3-Lug TRB Jack with Blunt Cut for 78 Ohm PE-30-02002, 48" Cable., Radio frequency assembly bend relief 3-Lug TRB jack with blunt cut for 78 Ohm PE-30-02002, 48" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Bend relief 3-Lug TRB jack with blunt cut for 78 Ohm PE-30-02002, 48" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB solder cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a jack gender on end 1 and blunt cut genderless on end 2. PE3MP2547-48 can also be known as a 1553 TRB female to blunt cut blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB female to blunt cut blunt cut genderless cable assembly PE3MP2547-48 is built with PE-30-02002 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 10 MHz maximum frequency TRB jack solder to blunt cut blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2547-48 can also be used in the other direction and will be blunt cut blunt cut genderless to TRB jack solder cable assembly if the opposite connectivity is required. 1553 TRB female solder to blunt cut blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this bend relief 3-Lug TRB jack with blunt cut for 78 Ohm PE-30-02002, 48" cable. |
| 2 | ||
| PE3MP2546-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02002, RF Cable Type: PE-30-02002, RF Cable Impedance: 78 Ohm, Length, Max: 12 inches. Bend Relief 3-Lug TRB Jack to Jack for 78 Ohm PE-30-02002, 12" Cable., Radio frequency assembly bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02002, 12" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02002, 12" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a jack gender on end 1 and jack on end 2. PE3MP2546-12 can also be known as a 1553 TRB female to TRB female cable assembly and will be shipped same-day as it is purchased. TRB female to TRB female cable assembly PE3MP2546-12 is built with PE-30-02002 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 10 MHz maximum frequency TRB jack to TRB jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRB female to TRB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02002, 12" cable. |
| 1 | ||
| PE3MP2540-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02001, RF Cable Type: 30-02001, RF Cable Impedance: 78 Ohm, Length, Max: 48 inches. Bend Relief 3-Lug TRB Jack to Jack for 78 Ohm PE-30-02001, 48" Cable., Radio frequency assembly bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02001, 48" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02001, 48" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a jack gender on end 1 and jack on end 2. PE3MP2540-48 can also be known as a 1553 TRB female to TRB female cable assembly and will be shipped same-day as it is purchased. TRB female to TRB female cable assembly PE3MP2540-48 is built with 30-02001 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 400 MHz maximum frequency TRB jack to TRB jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRB female to TRB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02001, 48" cable. |
| 1 | ||
| PE3MP2546-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02002, RF Cable Type: PE-30-02002, RF Cable Impedance: 78 Ohm, Length, Max: 60 inches. Bend Relief 3-Lug TRB Jack to Jack for 78 Ohm PE-30-02002, 60" Cable., Radio frequency assembly bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02002, 60" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02002, 60" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a jack gender on end 1 and jack on end 2. PE3MP2546-60 can also be known as a 1553 TRB female to TRB female cable assembly and will be shipped same-day as it is purchased. TRB female to TRB female cable assembly PE3MP2546-60 is built with PE-30-02002 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 10 MHz maximum frequency TRB jack to TRB jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRB female to TRB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02002, 60" cable. |
| 1 | ||
| PE3MP2544-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm, Length, Max: 60 inches. Bend Relief 3-Lug TRB Jack with Blunt Cut for 78 Ohm PE-30-02003, 60" Cable., Radio frequency assembly bend relief 3-Lug TRB jack with blunt cut for 78 Ohm PE-30-02003, 60" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Bend relief 3-Lug TRB jack with blunt cut for 78 Ohm PE-30-02003, 60" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a jack gender on end 1 and genderless on end 2. PE3MP2544-60 can also be known as a 1553 TRB female to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB female to blunt cut genderless cable assembly PE3MP2544-60 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB jack to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2544-60 can also be used in the other direction and will be blunt cut genderless to TRB jack cable assembly if the opposite connectivity is required. 1553 TRB female to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this bend relief 3-Lug TRB jack with blunt cut for 78 Ohm PE-30-02003, 60" cable. |
| 1 | ||
| PE3MP2540-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02001, RF Cable Type: 30-02001, RF Cable Impedance: 78 Ohm, Length, Max: 12 inches. Bend Relief 3-Lug TRB Jack to Jack for 78 Ohm PE-30-02001, 12" Cable., Radio frequency assembly bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02001, 12" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02001, 12" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a jack gender on end 1 and jack on end 2. PE3MP2540-12 can also be known as a 1553 TRB female to TRB female cable assembly and will be shipped same-day as it is purchased. TRB female to TRB female cable assembly PE3MP2540-12 is built with 30-02001 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 400 MHz maximum frequency TRB jack to TRB jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRB female to TRB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02001, 12" cable. |
| 1 | ||
| PE3MP2546-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02002, RF Cable Type: PE-30-02002, RF Cable Impedance: 78 Ohm, Length, Max: 36 inches. Bend Relief 3-Lug TRB Jack to Jack for 78 Ohm PE-30-02002, 36" Cable., Radio frequency assembly bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02002, 36" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02002, 36" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a jack gender on end 1 and jack on end 2. PE3MP2546-36 can also be known as a 1553 TRB female to TRB female cable assembly and will be shipped same-day as it is purchased. TRB female to TRB female cable assembly PE3MP2546-36 is built with PE-30-02002 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 10 MHz maximum frequency TRB jack to TRB jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRB female to TRB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02002, 36" cable. |
| 1 | ||
| PE3MP2543-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm, Length, Max: 48 inches. Bend Relief 3-Lug TRB Jack to Jack for 78 Ohm PE-30-02003, 48" Cable., Radio frequency assembly bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02003, 48" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02003, 48" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a jack gender on end 1 and jack on end 2. PE3MP2543-48 can also be known as a 1553 TRB female to TRB female cable assembly and will be shipped same-day as it is purchased. TRB female to TRB female cable assembly PE3MP2543-48 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB jack to TRB jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRB female to TRB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02003, 48" cable. |
| 0 | ||
| PE3MP2543-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm, Length, Max: 60 inches. Bend Relief 3-Lug TRB Jack to Jack for 78 Ohm PE-30-02003, 60" Cable., Radio frequency assembly bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02003, 60" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02003, 60" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a jack gender on end 1 and jack on end 2. PE3MP2543-60 can also be known as a 1553 TRB female to TRB female cable assembly and will be shipped same-day as it is purchased. TRB female to TRB female cable assembly PE3MP2543-60 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB jack to TRB jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRB female to TRB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02003, 60" cable. |
| 0 | ||
![]() Vyrian | DMP2541UCP9-7 | Diodes Incorporated | Power Field-Effect Transistor, 3.8A I(D), 25V, 0.06ohm, 1-Element, P-Channel, Silicon, Metal-oxide Semiconductor FET | 16,189 | ||
| LP38692MP-2-5-NOPB | Texas Instruments | 9,750 | ||||
| LM1117MP-2-5-NOPB | Texas Instruments | 8,298 | ||||
| STM32MP257DAL3 | STMicroelectronics | RoHS : Compliant | 8,109 | |||
| HLMP-2500-FG000 | Broadcom Limited | RoHS : Compliant | 7,930 | |||
| MT42L256M16D1MP-25WT:A | Micron Technology Inc | LPDDR2 DRAM, 256MX16, CMOS, PBGA220 | 6,975 | |||
| MT42L128M64D2MP-25IT:A | Micron Technology Inc | LPDDR2 DRAM, 128MX64, CMOS, PBGA220 | 6,620 | |||
| MT42L384M32D3MP-25WT:A | Micron Technology Inc | LPDDR2 DRAM, 384MX32, CMOS, PBGA220 | 5,917 | |||
| MT42L256M16D1MP-25AAT:A | Micron Technology Inc | LPDDR2 DRAM, 256MX16, CMOS, PBGA220 RoHS : Compliant | 5,774 | |||
| MT42L256M64D4GVMP-25WT:A | Micron Technology Inc | LPDDR2 DRAM | 4,579 | |||
| STM32MP251CAK3 | STMicroelectronics | RoHS : Compliant | 4,369 | |||
| MT42L256M32D1MP-25IT:A | Micron Technology Inc | LPDDR2 DRAM, 256MX32, CMOS, PBGA220 | 4,230 | |||
LP3871EMP-2.5![]() | Texas Instruments | Fixed Positive LDO Regulator, 2.5V, 0.35V Dropout, CMOS, PDSO5 RoHS : Not Compliant | 4,145 | |||
| MT42L128M32D3MP-25AT:A | Micron Technology Inc | LPDDR2 DRAM, 128MX32, CMOS, PBGA220 | 2,730 | |||
| MT42L256M32D2GVMP-25WT:A | Micron Technology Inc | LPDDR2 DRAM | 2,433 | |||
![]() Win Source Electronics | UCLAMP2501T.TCT![]() | Semtech Corporation | Low Voltage Clamp 2.5V TVS Diode RoHS : Compliant |
| 125,888 | |
MP2562DS-LF![]() | Monolithic Power Systems | IC REG BUCK ADJ 1A 8SOIC RoHS : Compliant |
| 60,000 | ||
| MP2565DQ-LF-P | Monolithic Power Systems | IC REG BUCK ADJ 2.5A |
| 30,890 | ||
| RCLAMP2504N.TCT | Semtech Corporation | TVS DIODE 2.5VWM 15VC 10SLP RoHS : Compliant |
| 28,080 | ||
| RCLAMP2574N.TCT | Semtech Corporation | TVS DIODE 2.5VWM 20VC 10SLP / ESD Suppressor Diode Diode Array Uni-Dir 2.5V 10-Pin SLP EP T/R RoHS : Compliant |
| 27,000 | ||
MP2560DN-LF-Z![]() | Monolithic Power Systems | IC REG BUCK ADJ 2.5A 8SOICE RoHS : Compliant |
| 15,287 | ||
| DMP25H18DLFDE-7 | Diodes Incorporated | MOSFET P-CH 250V 260MA 6UDFN / P-Channel 250 V 260mA (Ta) 600mW (Ta) Surface Mount U-DFN2020-6 (Type E) RoHS : Compliant |
| 14,166 | ||
LM1117MP-2.5/NOPB![]() | Texas Instruments | IC REG LDO 2.5V 0.8A SOT223 RoHS : Compliant |
| 12,760 | ||
RCLAMP2502L.TBT![]() | Semtech Corporation | TVS DIODE 2.5VWM 20VC 8SOIC RoHS : Compliant |
| 7,900 | ||
| LM1117MP-2.5 | National Semiconductor Corporation | IC REG LINEAR FIXED POS LDO REG RoHS : Not Compliant |
| 5,000 | ||
LM2937IMP-2.5![]() | Texas Instruments | LM2937-2.5, LM2937-3.3 400mA and 500mA Voltage Regulators | IC REG LIN 2.5V 400MA SOT223-4 RoHS : Not Compliant |
| 2,905 | ||
LP3961EMP-2.5/NOPB![]() | Texas Instruments | IC REG LDO 2.5V 0.8A SOT223-5 RoHS : Compliant |
| 1,340 | ||
LP3964EMP-2.5![]() | Texas Instruments | LP396x 800-mA Fast Ultra-Low-Dropout Linear Regulators | IC REG LIN 2.5V 800MA SOT223-5 RoHS : Not Compliant |
| 930 | ||
| EKMM401VSN820MP25S | United Chemi-Con Inc | CAP ALUM 400V POLAR |
| 900 | ||
LM2937IMP-2.5/NOPB![]() | Texas Instruments | IC REG LDO 2.5V 0.4A SOT223 RoHS : Compliant |
| 899 |
| ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |