| 販売店 | 部品番号 | メーカー | 部品情報 | Price | Qty. BuyNow |
 ComSIT USA | DFE201612E1R0MP2
| Murata Manufacturing Co Ltd | AVAILABLE EU | | 10,964
 |
DFE252010PR47MP2
| Murata Manufacturing Co Ltd | AVAILABLE EU | | 143,593
 |
DFE252012P2R2MP2
| Murata Manufacturing Co Ltd | AVAILABLE EU | | 19,100
 |
DFE252012PR47MP2
| Murata Manufacturing Co Ltd | AVAILABLE EU | | 143,460
 |
DFE322512F100MP2
| Murata Manufacturing Co Ltd | AVAILABLE EU | | 5,285
 |
DMP2004VK7
| | AVAILABLE EU | | 2,541
 |
DMP2035U7
| | AVAILABLE EU | | 8,000
 |
DMP2065UQ7
| Diodes Incorporated | AVAILABLE EU | | 120,000
 |
DMP2104LP7
| Diodes Incorporated | AVAILABLE EU | | 417,724
 |
LMP2231AMFNOPB
| Texas Instruments | AVAILABLE EU | | 881
 |
MP2459GJZ
| Monolithic Power Systems | AVAILABLE EU | | 50,521
 |
MP2605DQLFP
| MONOLITHIC POWER SYSTEMS (MPS) | AVAILABLE EU | | 8,915
 |
MP28163GQZ
| MPS INDUSTRIES INC | AVAILABLE EU | | 8,144
 |
MP28164GDZ
| MONOLITHIC POWER SYSTEMS (MPS) | AVAILABLE EU | | 21,877
 |
MP2853GU0060Z
| MPS - MONOLITHIC POWER SYSTEMS | AVAILABLE EU | | 25,758
 |
 PUI | EKMM401VNN680MP25U
| United Chemi-Con Inc | RoHS : Compliant | | 200
 |
 Braemac Americas-Symmetry | MP-2LG-SMSMSM-1K
| embedded antenna design (ead) | MP-2LG antenna with 3 x 1M RG174 and SMA | | 0
 |
MP-2LG-SMSMSM-2K
| embedded antenna design (ead) | MP-2LG antenna with 3 x 2M RG174 and SMA | | 0
 |
MP-2L-SMSM-1K
| embedded antenna design (ead) | MP-2L antenna with 2 x 1M RG174 and SMA-Male | | 0
 |
CC-WMP255-KIT
| Digi International Inc | ConnectCore MP255 Development Kit incl. dev board with ConnectCore MP255 Dual, 8GB eMMC, 1GB DDR4, Wireless SOM RoHS : Compliant | | 0
 |
WDMP.2458.A
| Taoglas Antenna Solutions | WDMP.2458.A Wi-Fi Including Wi-Fi 6 Mechanical Patch Antenna | | 0
 |
RCLAMP2656P.TGT
 | Semtech Corporation | 3-Line 5V 0.6pF bidir with TVS SLP2018P6 RoHS : Compliant | | 0
 |
MP-2L-SMSM-2K
| embedded antenna design (ead) | MP-2L antenna with 2 x 2M RG174 and SMA-Male | | 0
 |
 Master Electronics | EKMH800VSN102MP25S
| United Chemi-Con Inc | Cap Aluminum Lytic 1000uF 80V 20% (22 X 25mm) Snap-In 10mm 0.249 Ohm 1220mA 2000h 105A°C RoHS : Compliant | 7,600 : $1.86 5,000 : $1.87 2,600 : $1.88 1,000 : $2.04 600 : $2.34 400 : $2.36 200 : $2.38 10 : $3.04
|
| 1,000
 |
62MP2500
| Essentra Components | Solid Locking Plug - Compatible Hole Diameter - 63.5 mm (2.500 in) - Compatible Panel Thickness Range - 6.4 mm (0.250 in) RoHS : Compliant | 15,000 : $0.4339 10,000 : $0.4397 7,500 : $0.4438 5,000 : $0.4496 2,500 : $0.509 1,000 : $0.5235 300 : $0.601 100 : $0.6204
|
| 500
 |
EKMS161VSN471MP25S
| United Chemi-Con Inc | Cap Aluminum Lytic 470uF 160V 20% (22 X 25mm) Snap-In 10mm 1470mA 3000h 105A°C RoHS : Compliant | 5,000 : $1.01 2,600 : $1.03 1,000 : $2.06 600 : $2.07 400 : $2.12 200 : $2.15 50 : $2.24 10 : $2.46
|
| 186
 |
CMP2512-FX-3903ELF
| Bourns Inc | Res Thick Film 2512 390K Ohm 1% 1.5W ±100ppm/C Pad SMD T/R RoHS : Compliant | 152,000 : $0.0934 100,000 : $0.0936 52,000 : $0.0961 28,000 : $0.1 12,000 : $0.1028 8,000 : $0.1058 4,000 : $0.109
|
| 0
 |
ESMM251VSN151MP20S
| United Chemi-Con Inc | Cap Aluminum Lytic 150uF 250V 20% (22 X 20mm) Snap-In 10mm 970mA 3000h 85A°C RoHS : Compliant | 10,000 : $1.01 7,600 : $1.02 5,000 : $1.04 2,600 : $1.07 1,000 : $1.11 600 : $1.14 400 : $1.16 200 : $1.22
|
| 0
 |
DSPIC33CK256MP202T-I/SS
| Microchip Technology Inc | 16bit Digital Signal Controllers - 256Kbytes Flash Memory - 28-pin SSOP - 3.0 to 3.6V - DC to 100MIPS - 250 ps PWM Resolution - CAN FD - -40°C to +85°C RoHS : Compliant | 2,100 : $1.64 1,575 : $1.67 1,050 : $2.38 525 : $4.49
|
| 0
 |
DSPIC33CK256MP208T-I/PT
| Microchip Technology Inc | MCU - 16-bit Digital Signal Controllers - 256KB Flash - 80-pin TQFP - 3.0 to 3.6V - DC to 100MIPS - 250 ps PWM Resolution - CAN FD - -40°C to +85°C RoHS : Compliant | 1,200 : $2.06 900 : $2.1 600 : $2.66 300 : $4.32
|
| 0
 |
DSPIC33CK32MP206-I/PT
| Microchip Technology Inc | MCU - 16-bit Digital Signal Controllers - 32KB Flash - 64-pin TQFP - 3.0 to 3.6V - DC to 100MIPS - 250 ps PWM Resolution - CAN FD - -40°C to +85°C RoHS : Compliant | 480 : $1.85 360 : $1.89 240 : $2.02 120 : $2.69
|
| 0
 |
DSPIC33CH128MP205-E/PT
| Microchip Technology Inc | Microcontroller - dsPIC 33CH FuSa - 16-Bit Dual-Core - 180/200MHz - 39 I/O - 152KB (152K x 8) FLASH PRAM - 20K x 8 RAM - 3 to 3.6V - 48-TQFP. RoHS : Compliant | 500 : $2.44 375 : $2.49 250 : $2.67 125 : $3.56
|
| 0
 |
EKMH6R3VSN123MP25S
| United Chemi-Con Inc | Cap Aluminum Lytic 12000uF 6.3V 20% (22 X 25mm) Snap-In 10mm 0.083 Ohm 1540mA 2000h 105A°C RoHS : Compliant | 5,000 : $1.18 2,600 : $1.21 1,000 : $2.43 600 : $2.44 400 : $2.58 200 : $2.66 50 : $2.87 10 : $3.42
|
| 0
 |
EKMH101VSN271MP20S
| United Chemi-Con Inc | RoHS : Compliant | 10,000 : $0.955 7,600 : $0.969 5,000 : $0.984 2,600 : $1.011 1,000 : $1.054 600 : $1.085 400 : $1.101 200 : $1.153
|
| 0
 |
EKMM161VSN221MP20S
| United Chemi-Con Inc | Cap Aluminum Lytic 220uF 160V 20% (22 X 20mm) Snap-In 10mm 810mA 3000h 105A°C RoHS : Compliant | 7,600 : $0.866 5,000 : $0.889 2,600 : $0.913 1,000 : $1.836 600 : $1.914 400 : $1.942 200 : $2.0 10 : $2.577
|
| 0
 |
EKMM181VSN271MP25S
| United Chemi-Con Inc | RoHS : Compliant | 7,600 : $0.983 5,000 : $1.009 2,600 : $1.037 1,000 : $2.082 600 : $2.171 400 : $2.203 200 : $2.269 10 : $2.923
|
| 0
 |
ESMH800VSN122MP25S
| United Chemi-Con Inc | Cap Aluminum Lytic 1200uF 80V 20% (22 X 25mm) Snap-In 10mm 0.207 Ohm 1690mA 2000h 85A°C RoHS : Compliant | 10,000 : $0.964 7,600 : $0.978 5,000 : $0.993 2,600 : $1.021 1,000 : $1.064 600 : $1.095 400 : $1.112 200 : $1.164
|
| 0
 |
ESMQ181VSN471MP25S
| United Chemi-Con Inc | RoHS : Compliant | 5,000 : $1.31 2,600 : $1.34 1,000 : $2.77 600 : $2.78 400 : $2.9 200 : $3.03 50 : $3.17 10 : $3.9
|
| 0
 |
 Neutron USA | MP2-115A
| Vertiv Inc | Liebert MicroPod MP2-115A - Bypass switch - AC 120 V - output connectors: 8 - 2U | | 123
 |
RCMP20VT-01
| Littelfuse Inc | Board Mount Current Sensors Residual Current Monitor, 6mA DC/30mA Fault Current Detection, IEC62955, 20mm Open Aperature, Vertical Mount RoHS : Compliant | | 50
 |
PMP2425WH
 | Crydom Inc | Proportional Control Solid State Relay, Chassis Mt, Load: 25A 90-280VAC TP, Control: 0-5/10VDC 4-20mA, Screw Terminal, Thermal Pad RoHS : Compliant | | 50
 |
MP2-130P
| Vertiv Inc | 120V 30A 4X5-15R 2XL5-20R MICROPOD MAINTENANCE BYPASS. | | 50
 |
GC1WBM-P20WMM0-000L
| ODU Steckverbindungssysteme Gmbh & Co Kg | Circular Push Pull Connectors ODU AMC High-Density size 1RECP style C, series: W | | 49
 |
MP22DMRINRB006A5
| Bulgin | Pushbutton Switches MP22 Series, DPDT, Momentary, Ring Illumination, Blue , 6V, AL alloy Black, IP65 RoHS : Compliant | | 19
 |
MP22DMRINRB012S5
| Bulgin | Pushbutton Switches MP22 Series, DPDT, Momentary, Ring Illumination, Blue , 12V, Stainless Steel, IP65 RoHS : Compliant | | 18
 |
PMP2450WP
 | Crydom Inc | Proportional Control SSR, Multifunction, Panel Mount, 280VAC/50A, IOP RoHS : Compliant | | 15
 |
EMP2-X4S1-W1
| Innodisk Corporation | mPCIe to four Isolated RS-485 RS-485 x 4 | | 13
 |
CMP250PS48
| XP Power | Power Supply; AC-DC; 48V@5.2A; 5V@1.5A; 12V@0.6A; 80-264V In; Open Frame; Medical; 250W RoHS : Compliant | | 3
 |
PROMP243XW
| MSi | PRO MP243XW 24IN IPS PANEL 1920X1080 (FHD) | | 0
 |
MP2-11R
| ABB Low Voltage Products and Systems | Modular Series; Red Push Button Head; Maintained; Momentary; 22mm Cutout | | 0
 |
PMP2490W
 | Crydom Inc | Proportional Control SSR Multifunction Panel Mount 280VAC/90A RoHS : Compliant | | 0
 |
MP2-31W
| ABB Low Voltage Products and Systems | Pushbutton Switch, PB MAIN WHT FLUSH ILL METAL | | 0
 |
MP2-10Y
| ABB Low Voltage Products and Systems | Modular Pushbutton - Maintained - Flush - Yellow - Non-illuminated - Black plastic - No contact block | | 0
 |
 Pasternack Enterprises US | PE3MP2017
| Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm. 78 Ohm 3-Slot TRB Solder/Clamp Plug with Blunt Cut for PE-30-02003 Twinax (.150 O.D.) Cable., Radio frequency assembly 78 Ohm 3-Slot TRB solder/clamp plug with blunt cut for PE-30-02003 twinax (.150 O.D.) cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 78 Ohm 3-Slot TRB solder/clamp plug with blunt cut for PE-30-02003 twinax (.150 O.D.) cable, TRB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a plug gender on end 1 and genderless on end 2. PE3MP2017 can also be known as a 1553 TRB male to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB male to blunt cut genderless cable assembly PE3MP2017 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB plug to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2017 can also be used in the other direction and will be blunt cut genderless to TRB plug cable assembly if the opposite connectivity is required. 1553 TRB male to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 78 Ohm 3-Slot TRB solder/clamp plug with blunt cut for PE-30-02003 twinax (.150 O.D.) cable. | | 775
 |
PE3MP2347
| Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm. 78 Ohm Bend Relief 3-Slot TRB Solder/Clamp Plug with Blunt Cut for PE-30-02003 Twinax (.150 O.D.) Cable., Radio frequency assembly 78 Ohm bend relief 3-Slot TRB solder/clamp plug with blunt cut for PE-30-02003 twinax (.150 O.D.) cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 78 Ohm bend relief 3-Slot TRB solder/clamp plug with blunt cut for PE-30-02003 twinax (.150 O.D.) cable, TRB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a plug gender on end 1 and genderless on end 2. PE3MP2347 can also be known as a 1553 TRB male to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB male to blunt cut genderless cable assembly PE3MP2347 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB plug to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2347 can also be used in the other direction and will be blunt cut genderless to TRB plug cable assembly if the opposite connectivity is required. 1553 TRB male to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 78 Ohm bend relief 3-Slot TRB solder/clamp plug with blunt cut for PE-30-02003 twinax (.150 O.D.) cable. | | 735
 |
PE3MP2310
| Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm. 78 Ohm TRB 3-Slot Solder/Clamp Plug to 3-Lug Solder/Clamp Insulated Bulkhead Jack for PE-30-02003 Twinax (.150 O.D.) Cable., Radio frequency assembly 78 Ohm TRB 3-Slot solder/clamp plug to 3-Lug solder/clamp insulated bulkhead jack for PE-30-02003 twinax (.150 O.D.) cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 78 Ohm TRB 3-Slot solder/clamp plug to 3-Lug solder/clamp insulated bulkhead jack for PE-30-02003 twinax (.150 O.D.) cable, TRB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB bulkhead cable connection on the other. Our 1553 TRB to TRB cable assemblies have a plug gender on end 1 and jack on end 2. PE3MP2310 can also be known as a 1553 TRB male to TRB female cable assembly and will be shipped same-day as it is purchased. TRB male to TRB female cable assembly PE3MP2310 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB plug to TRB jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2310 can also be used in the other direction and will be TRB jack bulkhead to TRB plug cable assembly if the opposite connectivity is required. 1553 TRB male to TRB female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 78 Ohm TRB 3-Slot solder/clamp plug to 3-Lug solder/clamp insulated bulkhead jack for PE-30-02003 twinax (.150 O.D.) cable. | | 250
 |
PE3MP2059
| Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: M17/176-00002, RF Cable Type: M17/176-00002, RF Cable Impedance: 78 Ohm. TRB 3-Slot Solder/Clamp Plug to TRB 3-Lug Solder/Clamp Cable Jack M17/176-00002 .129 O.D. Cable., Radio frequency assembly TRB 3-Slot solder/clamp plug to TRB 3-Lug solder/clamp cable jack M17/176-00002 .129 O.D. cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TRB 3-Slot solder/clamp plug to TRB 3-Lug solder/clamp cable jack M17/176-00002 .129 O.D. cable, TRB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a plug gender on end 1 and jack on end 2. PE3MP2059 can also be known as a 1553 TRB male to TRB female cable assembly and will be shipped same-day as it is purchased. TRB male to TRB female cable assembly PE3MP2059 is built with M17/176-00002 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 10 MHz maximum frequency TRB plug to TRB jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2059 can also be used in the other direction and will be TRB jack to TRB plug cable assembly if the opposite connectivity is required. 1553 TRB male to TRB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TRB 3-Slot solder/clamp plug to TRB 3-Lug solder/clamp cable jack M17/176-00002 .129 O.D. cable. | | 165
 |
PE3MP2041
| Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: M17/176-00002, RF Cable Type: M17/176-00002, RF Cable Impedance: 78 Ohm. TRB Jack to TRB Jack 1553 Cable Using 78 Ohm M17/176-00002 Coax., Radio frequency assembly TRB jack to TRB jack 1553 cable using 78 Ohm M17/176-00002 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TRB jack to TRB jack 1553 cable using 78 Ohm M17/176-00002 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a jack gender on end 1 and jack on end 2. PE3MP2041 can also be known as a 1553 TRB female to TRB female cable assembly and will be shipped same-day as it is purchased. TRB female to TRB female cable assembly PE3MP2041 is built with M17/176-00002 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 10 MHz maximum frequency TRB jack to TRB jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRB female to TRB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TRB jack to TRB jack 1553 cable using 78 Ohm M17/176-00002 coax. | | 80
 |
PE3MP2218
| Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: JACK, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: JACK, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02001, RF Cable Type: PE-30-02001, RF Cable Impedance: 78 Ohm. TRB JACK to TRB JACK 1553 Cable Using 78 Ohm PE-30-02001 Coax., Radio frequency assembly TRB JACK to TRB JACK 1553 cable using 78 Ohm PE-30-02001 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TRB JACK to TRB JACK 1553 cable using 78 Ohm PE-30-02001 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a jack gender on end 1 and jack on end 2. PE3MP2218 can also be known as a 1553 TRB female to TRB female cable assembly and will be shipped same-day as it is purchased. TRB female to TRB female cable assembly PE3MP2218 is built with PE-30-02001 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 400 MHz maximum frequency TRB jack to TRB jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRB female to TRB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TRB JACK to TRB JACK 1553 cable using 78 Ohm PE-30-02001 coax. | | 35
 |
PE3MP2224
| Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: PLUG, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: JACK, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: PE-30-02003, RF Cable Impedance: 78 Ohm. TRB 3-Slot Plug to TRB Bulkhead Non-Insulated Jack 1553 Cable Using 78 Ohm PE-30-02003 Coax., Radio frequency assembly TRB 3-Slot plug to TRB bulkhead non-insulated jack 1553 cable using 78 Ohm PE-30-02003 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TRB 3-Slot plug to TRB bulkhead non-insulated jack 1553 cable using 78 Ohm PE-30-02003 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB bulkhead cable connection on the other. Our 1553 TRB to TRB cable assemblies have a plug gender on end 1 and jack on end 2. PE3MP2224 can also be known as a 1553 TRB male to TRB female cable assembly and will be shipped same-day as it is purchased. TRB male to TRB female cable assembly PE3MP2224 is built with PE-30-02003 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB plug to TRB jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2224 can also be used in the other direction and will be TRB jack bulkhead to TRB plug cable assembly if the opposite connectivity is required. 1553 TRB male to TRB female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TRB 3-Slot plug to TRB bulkhead non-insulated jack 1553 cable using 78 Ohm PE-30-02003 coax. | | 25
 |
PE3MP2275-48
| Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: JACK, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02001, RF Cable Type: 30-02001, RF Cable Impedance: 78 Ohm, Length, Max: 48 inches. TRB Jack with Blunt Cut 1553 Cable 48 Inch Length Using 78 Ohm PE-30-02001 Coax., Radio frequency assembly TRB jack with blunt cut 1553 cable 48 inch length using 78 Ohm PE-30-02001 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TRB jack with blunt cut 1553 cable 48 inch length using 78 Ohm PE-30-02001 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a jack gender on end 1 and genderless on end 2. PE3MP2275-48 can also be known as a 1553 TRB female to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB female to blunt cut genderless cable assembly PE3MP2275-48 is built with 30-02001 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 400 MHz maximum frequency TRB jack to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2275-48 can also be used in the other direction and will be blunt cut genderless to TRB jack cable assembly if the opposite connectivity is required. 1553 TRB female to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TRB jack with blunt cut 1553 cable 48 inch length using 78 Ohm PE-30-02001 coax. | 1 : $179.99 25 : $170.99 50 : $161.99 100 : $154.79
|
| 6
 |
PE3MP2232-24
| Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: M17/176-00002, RF Cable Type: M17/176-00002, RF Cable Impedance: 78 Ohm, Length, Max: 24 inches. 78 Ohm Bend Relief 3-Slot TRB Solder/Clamp Plug to Bend Relief 2-Slot TRB Solder/Clamp Plug for M17/176-00002 Twinax (.129 O.D.) 24" Cable., Radio frequency assembly 78 Ohm bend relief 3-Slot TRB solder/clamp plug to bend relief 2-Slot TRB solder/clamp plug for M17/176-00002 twinax (.129 O.D.) 24" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 78 Ohm bend relief 3-Slot TRB solder/clamp plug to bend relief 2-Slot TRB solder/clamp plug for M17/176-00002 twinax (.129 O.D.) 24" cable, TRB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a plug gender on end 1 and plug on end 2. PE3MP2232-24 can also be known as a 1553 TRB male to TRB male cable assembly and will be shipped same-day as it is purchased. TRB male to TRB male cable assembly PE3MP2232-24 is built with M17/176-00002 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 10 MHz maximum frequency TRB plug to TRB plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRB male to TRB male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 78 Ohm bend relief 3-Slot TRB solder/clamp plug to bend relief 2-Slot TRB solder/clamp plug for M17/176-00002 twinax (.129 O.D.) 24" cable. | 1 : $248.99 25 : $236.54 50 : $224.09 100 : $214.13
|
| 6
 |
PE3MP2218-48
| Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: JACK, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: JACK, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02001, RF Cable Type: PE-30-02001, RF Cable Impedance: 78 Ohm, Length, Max: 48 inches. TRB JACK to TRB JACK 1553 Cable 48 Inch Length Using 78 Ohm PE-30-02001 Coax., Radio frequency assembly TRB JACK to TRB JACK 1553 cable 48 inch length using 78 Ohm PE-30-02001 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TRB JACK to TRB JACK 1553 cable 48 inch length using 78 Ohm PE-30-02001 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a jack gender on end 1 and jack on end 2. PE3MP2218-48 can also be known as a 1553 TRB female to TRB female cable assembly and will be shipped same-day as it is purchased. TRB female to TRB female cable assembly PE3MP2218-48 is built with PE-30-02001 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 400 MHz maximum frequency TRB jack to TRB jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRB female to TRB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TRB JACK to TRB JACK 1553 cable 48 inch length using 78 Ohm PE-30-02001 coax. | 1 : $181.99 25 : $172.89 50 : $163.79 100 : $156.51
|
| 6
 |
PE3MP2625-12
| Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm, Length, Max: 12 inches. Bend Relief 3-Slot TRB Plug to Bend Relief 3-Lug TRB Bulkhead Jack for 78 Ohm PE-30-02003, 12" Cable., Radio frequency assembly bend relief 3-Slot TRB plug to bend relief 3-Lug TRB bulkhead jack for 78 Ohm PE-30-02003, 12" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Bend relief 3-Slot TRB plug to bend relief 3-Lug TRB bulkhead jackfor 78 Ohm PE-30-02003, 12" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB bulkhead cable connection on the other. Our 1553 TRB to TRB cable assemblies have a plug gender on end 1 and jack on end 2. PE3MP2625-12 can also be known as a 1553 TRB male to TRB female cable assembly and will be shipped same-day as it is purchased. TRB male to TRB female cable assembly PE3MP2625-12 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB plug to TRB jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2625-12 can also be used in the other direction and will be TRB jack bulkhead to TRB plug cable assembly if the opposite connectivity is required. 1553 TRB male to TRB female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this bend relief 3-Slot TRB plug to bend relief 3-Lug TRB bulkhead jack for 78 Ohm PE-30-02003, 12" cable. | 1 : $175.99 25 : $167.19 50 : $158.39 100 : $151.35
|
| 5
 |
PE3MP2625-60
| Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm, Length, Max: 60 inches. Bend Relief 3-Slot TRB Plug to Bend Relief 3-Lug TRB Bulkhead Jack for 78 Ohm PE-30-02003, 60" Cable., Radio frequency assembly bend relief 3-Slot TRB plug to bend relief 3-Lug TRB bulkhead jack for 78 Ohm PE-30-02003, 60" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Bend relief 3-Slot TRB plug to bend relief 3-Lug TRB bulkhead jackfor 78 Ohm PE-30-02003, 60" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB bulkhead cable connection on the other. Our 1553 TRB to TRB cable assemblies have a plug gender on end 1 and jack on end 2. PE3MP2625-60 can also be known as a 1553 TRB male to TRB female cable assembly and will be shipped same-day as it is purchased. TRB male to TRB female cable assembly PE3MP2625-60 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB plug to TRB jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2625-60 can also be used in the other direction and will be TRB jack bulkhead to TRB plug cable assembly if the opposite connectivity is required. 1553 TRB male to TRB female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this bend relief 3-Slot TRB plug to bend relief 3-Lug TRB bulkhead jack for 78 Ohm PE-30-02003, 60" cable. | 1 : $201.99 25 : $191.89 50 : $181.79 100 : $173.71
|
| 5
 |
PE3MP2456-48
| Pasternack Enterprises | Key Specifications, Connector 1 Series: TRS SUBMINIATURE, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm, Length, Max: 48 inches. TRS Subminiature Plug with Blunt Cut for 78 Ohm PE-30-02003, 48" Cable., Radio frequency assembly TRS subminiature plug with blunt cut for 78 Ohm PE-30-02003, 48" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TRS subminiature plug with blunt cut for 78 Ohm PE-30-02003, 48" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRS SUBMINIATURE to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRS SUBMINIATURE cable connection on one end and blunt cut cable connection on the other. Our 1553 TRS SUBMINIATURE to blunt cut cable assemblies have a plug gender on end 1 and genderless on end 2. PE3MP2456-48 can also be known as a 1553 TRS SUBMINIATURE male to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRS SUBMINIATURE male to blunt cut genderless cable assembly PE3MP2456-48 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRS SUBMINIATURE cable assembly is manufactured with TRS SUBMINIATURE to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRS SUBMINIATURE plug to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2456-48 can also be used in the other direction and will be blunt cut genderless to TRS SUBMINIATURE plug cable assembly if the opposite connectivity is required. 1553 TRS SUBMINIATURE male to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRS SUBMINIATURE to blunt cut cable assembly for quick shipment worldwide. Variations of TRS SUBMINIATURE cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TRS subminiature plug with blunt cut for 78 Ohm PE-30-02003, 48" cable. | 1 : $291.99 25 : $277.39 50 : $262.79 100 : $251.11
|
| 4
 |
PE3MP2397-12
| Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm, Length, Max: 12 inches. Bend Relief 3-Slot TRB Plug to Bend Relief 3-Lug TRB Jack for 78 Ohm PE-30-02003, 12" Cable., Radio frequency assembly bend relief 3-Slot TRB plug to bend relief 3-Lug TRB jack for 78 Ohm PE-30-02003, 12" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Bend relief 3-Slot TRB plug to bend relief 3-Lug TRB jack for 78 Ohm PE-30-02003, 12" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a plug gender on end 1 and jack on end 2. PE3MP2397-12 can also be known as a 1553 TRB male to TRB female cable assembly and will be shipped same-day as it is purchased. TRB male to TRB female cable assembly PE3MP2397-12 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB plug to TRB jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2397-12 can also be used in the other direction and will be TRB jack to TRB plug cable assembly if the opposite connectivity is required. 1553 TRB male to TRB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this bend relief 3-Slot TRB plug to bend relief 3-Lug TRB jack for 78 Ohm PE-30-02003, 12" cable. | 1 : $175.99 25 : $167.19 50 : $158.39 100 : $151.35
|
| 1
 |
PE3MP2134
| Pasternack Enterprises | Key Specifications, Connector 1 Series: TRS, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRS, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: M17/176-00002, RF Cable Type: M17/176-00002, RF Cable Impedance: 78 Ohm. 3-Slot TRS Subminiature Plug to Plug 1553 Cable Using 78 Ohm M17/176-00002 Coax., Radio frequency assembly 3-Slot TRS subminiature plug to plug 1553 cable using 78 Ohm M17/176-00002 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3-Slot TRS subminiature plug to plug 1553 cable using 78 Ohm M17/176-00002 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRS to TRS cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRS cable connection on one end and TRS cable connection on the other. Our 1553 TRS to TRS cable assemblies have a plug gender on end 1 and plug on end 2. PE3MP2134 can also be known as a 1553 TRS male to TRS male cable assembly and will be shipped same-day as it is purchased. TRS male to TRS male cable assembly PE3MP2134 is built with M17/176-00002 which is a flexible twinax type. The Pasternack flexible TRS cable assembly is manufactured with TRS to TRS cable connectors, has a 78 Ohm impedance. RF specs on this 10 MHz maximum frequency TRS plug to TRS plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRS male to TRS male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRS to TRS cable assembly for quick shipment worldwide. Variations of TRS cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 3-Slot TRS subminiature plug to plug 1553 cable using 78 Ohm M17/176-00002 coax. | | 0
 |
 Vyrian | UPC277MP(20)-KAA-E1-A
| Renesas Electronics Corporation | Comparator, 2 Func, BIPolar, PDSO8 RoHS : Compliant | | 12,402
 |
TMP235A4DCKR
 | Texas Instruments | Analog Voltage Output Sensor, 20ohm, 5Cel, CMOS, Rectangular, Surface Mount RoHS : Compliant | | 9,509
 |
TMP275DGK
| Texas Instruments | Serial Switch/Digital Sensor, 12 Bit(s), 1.5Cel | | 8,154
 |
STM32MP215DAO3
| STMicroelectronics | | | 6,520
 |
TMP235AQDCKTQ1
 | Texas Instruments | Analog Voltage Output Sensor, 500uA, 2.50Cel, Rectangular, Surface Mount RoHS : Compliant | | 6,035
 |
TMP275AIDGKRG4
 | Texas Instruments | Serial Switch/Digital Sensor, 12 Bit(s), 0.5Cel, Square, 8 Pin, Surface Mount RoHS : Compliant | | 5,602
 |
STM32MP213CAL3
| STMicroelectronics | | | 5,595
 |
TMP235EVM
| Texas Instruments | | | 5,422
 |
TMP236EVM
 | Texas Instruments | | | 5,399
 |
TMP275AIDG4
| Texas Instruments | Serial Switch/Digital Sensor, 12 Bit(s), 0.50Cel, Rectangular, 8 Pin, Surface Mount RoHS : Compliant | | 5,038
 |
TMP20AIDCKT
 | Texas Instruments | Analog Voltage Output Sensor, 10ohm, 2.50Cel, CMOS, Rectangular, Surface Mount RoHS : Compliant | | 4,900
 |
STM32MP215DAM3
| STMicroelectronics | | | 3,846
 |
STM32MP215DAL3
| STMicroelectronics | | | 3,830
 |
TMP275AIDGKTG4
 | Texas Instruments | Serial Switch/Digital Sensor, 12 Bit(s), 0.5Cel, Square, 8 Pin, Surface Mount RoHS : Compliant | | 3,450
 |
ZXMP2120G4TA
| Diodes Incorporated | Small Signal Field-Effect Transistor, 0.2A I(D), 200V, 1-Element, P-Channel, Silicon, Metal-oxide Semiconductor FET, TO-261AA | | 217
 |
 Win Source Electronics | DMP2065UFDB-7
| Diodes Incorporated | MOSFET 2 P-CH 20V 4.5A DFN2020-6 RoHS : Compliant | 800 : $0.3756 640 : $0.3909 495 : $0.4062 345 : $0.4367 225 : $0.452 105 : $0.4825
|
| 159,000
 |
DFE252012P-1R5M=P2
| Murata Manufacturing Co Ltd | FIXED IND 1.5UH 3.5A 60 MOHM SMD / 1.5 µH Shielded Drum Core, Wirewound Inductor 3.5 A 60mOhm Max 1008 (2520 Metric) RoHS : Compliant | 5,360 : $0.056 4,010 : $0.0624 3,100 : $0.0646 2,250 : $0.0667 1,455 : $0.0689 600 : $0.0839
|
| 120,000
 |
DMP2035UVT-7
 | Diodes Incorporated | MOSFET P-CH 20V 6A TSOT26 RoHS : Compliant | 2,660 : $0.1128 1,990 : $0.1258 1,540 : $0.1301 1,120 : $0.1345 725 : $0.1388 300 : $0.1691
|
| 105,000
 |
DMP22D4UFA-7B
| Diodes Incorporated | MOSFET P-CH 20V 0.33A RoHS : Compliant | 315 : $0.9585 235 : $1.069 185 : $1.1059 135 : $1.1428 85 : $1.1796 35 : $1.4377
|
| 90,000
 |
MP2459GJ
| Monolithic Power Systems | Step Down Converte Wit RoHS : Compliant | 320 : $0.9422 255 : $0.9805 200 : $1.0188 140 : $1.0954 90 : $1.1337 45 : $1.2103
|
| 84,000
 |
MP2459GJ-Z
| Monolithic Power Systems | IC REG BUCK ADJ 500MA TSOT23-6 RoHS : Compliant | 320 : $0.9422 255 : $0.9805 200 : $1.0188 140 : $1.0954 90 : $1.1337 45 : $1.2103
|
| 77,870
 |
MP2459GJ-P
 | Monolithic Power Systems | IC REG BUCK ADJ 500MA TSOT23-6 | 320 : $0.9422 255 : $0.9805 200 : $1.0188 140 : $1.0954 90 : $1.1337 45 : $1.2103
|
| 76,680
 |
DFE252010P-2R2M=P2
| Murata Manufacturing Co Ltd | FIXED IND 2.2UH 2.6A 115MOHM SMD RoHS : Compliant | 5,705 : $0.0526 4,260 : $0.0587 3,295 : $0.0607 2,395 : $0.0627 1,550 : $0.0647 635 : $0.0789
|
| 68,000
 |
MP2225GJ
| Monolithic Power Systems | HIGH-EFFICIENCY,5A,18V,500KHZ SY RoHS : Compliant | 420 : $0.7217 315 : $0.805 245 : $0.8327 175 : $0.8605 115 : $0.8883 50 : $1.0826
|
| 42,000
 |
TMP275AIDGKR/TMP275AIDGKT
| Texas Instruments | | 1,020 : $0.33 820 : $0.3434 630 : $0.3568 440 : $0.3836 285 : $0.397 135 : $0.4238
|
| 35,000
 |
TMP235AEDBZRQ1
 | Texas Instruments | IC TEMP SENSOR RoHS : Compliant | 870 : $0.3458 650 : $0.3857 505 : $0.399 365 : $0.4123 235 : $0.4256 100 : $0.5187
|
| 28,330
 |
MP28265EL-LF-Z
 | Monolithic Power Systems | IC REG BUCK ADJ 5A SYNC RoHS : Compliant | 255 : $1.1909 190 : $1.3283 150 : $1.3741 110 : $1.4199 70 : $1.4657 30 : $1.7863
|
| 13,630
 |
DMP2022LSS-13
 | Diodes Incorporated | MOSFET P-CH 20V 10A 8-SOIC RoHS : Compliant | 815 : $0.3691 610 : $0.4117 470 : $0.4259 345 : $0.4401 225 : $0.4543 95 : $0.5536
|
| 6,000
 |
TMP275AIDGKT
 | Texas Instruments | 0.5 C Digital Out Temperature Sensor RoHS : Compliant | 55 : $5.4615 42 : $6.0917 32 : $6.3017 24 : $6.5118 15 : $6.7219 7 : $8.1923
|
| 1,200
 |
MP2975GU-0000-Z
| Monolithic Power Systems | | 101 : $2.9771 76 : $3.3207 59 : $3.4352 43 : $3.5497 28 : $3.6642 12 : $4.4657
|
| 19
 |