R00L-TN3-R Price, 販売店, Stock

Pre-Printed Markers - Tie-On - 65 Marker Size - White - Straight Cut - 8 Printed Marking - Width 6 mm (.23 in) - Black - Flexible PVC.
RoHS : Compliant

250,000 : $0.0371
150,000 : $0.0378
100,000 : $0.0384
50,000 : $0.0393
25,000 : $0.0403
10,000 : $0.0416
5,000 : $0.0425
2,000 : $0.0458

1SNA230051R0000

TE Connectivity

ABB-CONNECTION - CONNECTION - MARKERS
RoHS : Compliant

2,500 : $3.85
1,000 : $3.95
500 : $4.06
250 : $4.29
100 : $4.42
50 : $4.63
19 : $5.69
1 : $6.259

1SNA233159R0000

TE Connectivity

ABB-CONNECTION - CONNECTION - MARKERS
RoHS : Compliant

5,000 : $3.8
2,500 : $3.85
1,000 : $3.95
500 : $4.06
250 : $4.29
100 : $4.42
50 : $4.63
5 : $5.69

1SNA235621R0000

TE Connectivity

CPMF08105
RoHS : Compliant

7,502 : $2.05
5,016 : $2.08
2,508 : $2.13
1,012 : $2.19
506 : $2.28
264 : $2.39
66 : $2.5
22 : $3.08

1SNA235818R0000

TE Connectivity

TAP1550
RoHS : Compliant

5,005 : $4.36
2,508 : $4.42
1,001 : $4.53
506 : $4.66
253 : $4.86
110 : $5.07
33 : $5.31
11 : $6.54

1SNB090120R0000

TE Connectivity

ABB-CONNECTION - CONNECTION - MARKERS
RoHS : Compliant

28 : $2.34

1SNB990824R0015

TE Connectivity

ABB-CONNECTION - CONNECTION - MARKERS
RoHS : Compliant

46 : $1.41

1SNG601015R0000

TE Connectivity

EP-SG-M12-BL-E MOQ Reduction
RoHS : Compliant

4,000 : $0.244
3,000 : $0.249
2,000 : $0.2668
1,000 : $0.3557

Pasternack Enterprises US

PE6TR001

Pasternack Enterprises

Key Specifications, Termination Type: Feed-Thru Load, Connector Series: BNC, Connector Gender: Male, Minimum Frequency: DC, Maximum Frequency: 1 GHz, Impedance: 75 Ohm, Maximum VSWR: 1.3:1, Maximum Power: 2 Watt. 2 Watt Feed-Thru Load Up to 1,000 MHz with 75 Ohm BNC Male to Female Tri-Metal Plated Brass. PE6TR001 2 Watts RF load (also known as termination or dummy load) has a BNC connector that is male. This Pasternack 2 watts BNC male load / termination is rated for a maximum frequency of 1 GHz. Our BNC male termination load is a feed-thru load termination with a 75 Ohm impedance. This BNC load / coax terminator is manufactured with no chain and brass body. Pasternack 75 Ohm BNC coaxial termination / load is RoHS compliant and has an average maximum VSWR of 1.3:1. PE6TR001 2 watts BNC male load termination is one of over 40,000 RF, microwave and millimeter wave components in-stock at Pasternack. Our BNC male 2 watts termination load will ship worldwide the same day as purchased.

1 : $59.99
25 : $56.99
50 : $53.99
100 : $51.59

107

PEW51TR001

Pasternack Enterprises

Key Specifications, Maximum Power: 2 Watt, Waveguide Size: WR-51, Minimum Frequency: 14.5 GHz, Maximum Frequency: 22 GHz. 2 Watts WR-51 Waveguide Load 14.5 to 22 GHz Copper with FBP180 Flange. The PEW51TR001 from Pasternack is a waveguide termination within a wide selection of waveguide components we supply. This waveguide termination is designed to operate within a frequency range of 14.5 GHz to 22 GHz. Our waveguide terminator comes with a WR-51 waveguide interface along with 2 Watts of input power (CW). Make your online purchase right now to take advantage of our same business day shipping. Pasternack’s PEW51TR001 WR-51 waveguide termination has a UG Cover flange. The PEW51TR001 WR-51 waveguide termination from Pasternack has an operating temperature ranging from -40 deg C to 70 deg C. This waveguide termination is built with passivated plated brass copper waveguide and features a grey paint finish. The maximum VSWR of this waveguide terminator is 1.03:1. Our waveguide termination measures 2.95 inches in length, 1.31 inches in width, and 1.31 inches in height. Additional specifications and dimensions of our termination can be found on its PDF specification datasheet and CAD drawings. Pasternack’s waveguide termination with a UG Cover flange is in stock and currently available for purchase. Our WR-51 waveguide terminator is part of over one million RF, microwave, and millimeter wave components ready for same-business-day shipment anywhere in the world. For further information on similar products, our expert technical support and trained sales team can get you to the ideal waveguide termination as per your requirements.

1 : $549.0
5 : $538.02
10 : $527.04
25 : $516.06

PEW34TR002

Pasternack Enterprises

Key Specifications, Maximum Power: 50 Watt, Waveguide Size: WR-34, Minimum Frequency: 21.7 GHz, Maximum Frequency: 33 GHz. 50 Watts WR-34 Waveguide Load 21.7 to 33 GHz Copper with UG-1530/U Flange. The PEW34TR002 from Pasternack is a waveguide termination within a wide selection of waveguide components we supply. This waveguide termination is designed to operate within a frequency range of 21.7 GHz to 33 GHz. Our waveguide terminator comes with a WR-34 waveguide interface along with 50 Watts of input power (CW). Make your online purchase right now to take advantage of our same business day shipping. The PEW34TR002 WR-34 waveguide termination from Pasternack has an operating temperature ranging from -40 deg C to 70 deg C. This waveguide termination is built with passivated plated brass copper waveguide and features a grey paint finish. The maximum VSWR of this waveguide terminator is 1.25:1. Our waveguide termination measures 3.54 inches in length, 1.5 inches in width, and 1.5 inches in height. Additional specifications and dimensions of our termination can be found on its PDF specification datasheet and CAD drawings. Pasternack’s waveguide termination with is in stock and currently available for purchase. Our WR-34 waveguide terminator is part of over one million RF, microwave, and millimeter wave components ready for same-business-day shipment anywhere in the world. For further information on similar products, our expert technical support and trained sales team can get you to the ideal waveguide termination as per your requirements.

1 : $1,399.0
5 : $1,371.02
10 : $1,343.04
25 : $1,315.06

PE-W51CR001

Pasternack Enterprises

Key Specifications. Minimum Frequency: 14.5 GHz Maximum Frequency: 22 GHz Waveguide size: WR-51 VSWR(Max): 1.3:1 Insertion Loss: 0.3 dB Isolation (min) : 18 dB Forward Power (CW)(Max): 50 Watts Input Power (Peak): 1 KWatts. WR-51 Waveguide Circulator, 14.5 GHz to 22 GHz, 18 dB min Isolation, Cover Flange, Aluminum. The PE-W51CR001 is a Waveguide Circulator offering 18 dB minimum isolation over the K band frequency range of 14.5 to 22 GHz. The design achieves high isolation with wide band performance and the WR-51 waveguide uses UG Square Cover compatible flanges on all ports and has a power rating of 50 watts (CW). Pasternack offers a wide variety of circulators and waveguide circulators to fit your needs. These unique devices enable two signals to use one channel. The classic use of this three port device is for the line between an antenna and a transceiver, allowing the receive signal to come from the antenna (port 1) to the receiver (port 2) while the transmit signal goes from the transmitter (port 3) to the antenna (port 1). An isolator can be created by terminating one port into a matched load. These components can be used in antenna transmitting and receiving, radar, amplifier systems and anything that requires isolation from a signal reflection and the ability to send signals in opposite directions down a single channel. These circulators feature excellent insertion loss, high isolation and reliability.

1 : $1,570.0
5 : $1,507.2
10 : $1,444.4
25 : $1,381.6

PE-W10CR002

Pasternack Enterprises

Key Specifications. Minimum Frequency: 92 GHz Maximum Frequency: 94 GHz Waveguide size: WR-10 VSWR(Max): 1.5:1 Insertion Loss: 1 dB Isolation (min) : 15 dB Forward Power (CW)(Max): 0.5 Watts Input Power (Peak): 20 Watts. WR-10 Waveguide Circulator, 92 GHz to 94 GHz, 15 dB min Isolation, UG-387/U-M Cover Flange, Brass. The PE-W10CR002 is a Waveguide Circulator offering 15 dB minimum isolation over the W band frequency range of 92 to 94 GHz. The design achieves high isolation with wide band performance and the WR-10 waveguide uses UG-387/U-M compatible flanges on all ports and has a power rating of 0.5 watts (CW). Pasternack offers a wide variety of circulators and waveguide circulators to fit your needs. These unique devices enable two signals to use one channel. The classic use of this three port device is for the line between an antenna and a transceiver, allowing the receive signal to come from the antenna (port 1) to the receiver (port 2) while the transmit signal goes from the transmitter (port 3) to the antenna (port 1). An isolator can be created by terminating one port into a matched load. These components can be used in antenna transmitting and receiving, radar, amplifier systems and anything that requires isolation from a signal reflection and the ability to send signals in opposite directions down a single channel. These circulators feature excellent insertion loss, high isolation and reliability.

1 : $3,930.0
5 : $3,772.8
10 : $3,615.6
25 : $3,458.4

PE-W12CR001

Pasternack Enterprises

Key Specifications. Minimum Frequency: 64.5 GHz Maximum Frequency: 66.5 GHz Waveguide size: WR-12 VSWR(Max): 1.4:1 Insertion Loss: 0.8 dB Isolation (min) : 15 dB Forward Power (CW)(Max): 2 Watts Input Power (Peak): 20 Watts. WR-12 Waveguide Circulator, 64.5 GHz to 66.5 GHz, 15 dB min Isolation, UG-387/U Cover Flange, Brass. The PE-W12CR001 is a Waveguide Circulator offering 15 dB minimum isolation over the E band frequency range of 64.5 to 66.5 GHz. The design achieves high isolation with wide band performance and the WR-12 waveguide uses UG-387/U compatible flanges on all ports and has a power rating of 2 watts (CW). Pasternack offers a wide variety of circulators and waveguide circulators to fit your needs. These unique devices enable two signals to use one channel. The classic use of this three port device is for the line between an antenna and a transceiver, allowing the receive signal to come from the antenna (port 1) to the receiver (port 2) while the transmit signal goes from the transmitter (port 3) to the antenna (port 1). An isolator can be created by terminating one port into a matched load. These components can be used in antenna transmitting and receiving, radar, amplifier systems and anything that requires isolation from a signal reflection and the ability to send signals in opposite directions down a single channel. These circulators feature excellent insertion loss, high isolation and reliability.

1 : $3,930.0
5 : $3,772.8
10 : $3,615.6
25 : $3,458.4

PEW90TR001

Pasternack Enterprises

Key Specifications, Maximum Power: 100 Watt, Waveguide Size: WR-90, Minimum Frequency: 8.2 GHz, Maximum Frequency: 12.5 GHz. 100 Watts WR-90 Waveguide Load 8.2 to 12.5 GHz Aluminum with FBP100 Flange. The PEW90TR001 from Pasternack is a waveguide termination within a wide selection of waveguide components we supply. This waveguide termination is designed to operate within a frequency range of 8.2 GHz to 12.5 GHz. Our waveguide terminator comes with a WR-90 waveguide interface along with 100 Watts of input power (CW). Make your online purchase right now to take advantage of our same business day shipping. Pasternack’s PEW90TR001 WR-90 waveguide termination has a FBP100 flange. The PEW90TR001 WR-90 waveguide termination from Pasternack has an operating temperature ranging from -40 deg C to 70 deg C. This waveguide termination is built with chromate conversion plated aluminum waveguide and features a grey paint finish. The maximum VSWR of this waveguide terminator is 1.25:1. Our waveguide termination measures 7.09 inches in length, 2.76 inches in width, and 2.76 inches in height. Additional specifications and dimensions of our termination can be found on its PDF specification datasheet and CAD drawings. Pasternack’s waveguide termination with a FBP100 flange is in stock and currently available for purchase. Our WR-90 waveguide terminator is part of over one million RF, microwave, and millimeter wave components ready for same-business-day shipment anywhere in the world. For further information on similar products, our expert technical support and trained sales team can get you to the ideal waveguide termination as per your requirements.

1 : $1,399.0
5 : $1,371.02
10 : $1,343.04
25 : $1,315.06

PE-W15IR002

Pasternack Enterprises

Key Specifications. Minimum Frequency: 65 GHz Maximum Frequency: 71 GHz Waveguide size: WR-15 VSWR(Max): 1.4:1 Insertion Loss: 0.6 dB Isolation (min) : 15 dB Forward Power (CW)(Max): 5 Watts Forward Power (Peak): 30 Watts Reverse Power (CW)(Max): 0.5 Watts Reverse Power (Peak): 3 Watts. WR-15 Waveguide Isolator from 65 GHz to 71 GHz, 15 dB min Isolation, UG-385/U Cover Flange, Brass. The PE-W15IR002 is a Waveguide Isolator offering 15 dB minimum isolation over the V band frequency range of 65 to 71 GHz. The design achieves high isolation with wide band performance and the WR-15 waveguide uses UG-385/U Cover compatible flanges on all ports and has a power rating of 5 watts (CW). Pasternack offers a wide variety of isolators and waveguide isolators to fit your needs. These are two-port devices that transmit microwave or radio frequency power in one direction only and block the signal in the opposite direction. They can be thought of as a diode for RF energy. Isolators are used to isolate equipment from the effects of conditions outside of the equipment. For instance they are used to prevent a microwave source being detuned by a mismatched load. Pasternack's waveguide isolators feature excellent insertion loss, full WR band high isolation and reliability.

1 : $3,480.0
5 : $3,340.8
10 : $3,201.6
25 : $3,062.4

PE-W12IR001

Pasternack Enterprises

Key Specifications. Minimum Frequency: 64.5 GHz Maximum Frequency: 66.5 GHz Waveguide size: WR-12 VSWR(Max): 1.4:1 Insertion Loss: 0.8 dB Isolation (min) : 15 dB Forward Power (CW)(Max): 2 Watts Forward Power (Peak): 20 Watts Reverse Power (CW)(Max): 0.2 Watts Reverse Power (Peak): 2 Watts. WR-12 Waveguide Isolator from 64.5 GHz to 66.5 GHz, 15 dB min Isolation, UG-387/U Cover Flange, Brass. The PE-W12IR001 is a Waveguide Isolator offering 15 dB minimum isolation over the E band frequency range of 64.5 to 66.5 GHz. The design achieves high isolation with wide band performance and the WR-12 waveguide uses UG-387/U Cover compatible flanges on all ports and has a power rating of 2 watts (CW). Pasternack offers a wide variety of isolators and waveguide isolators to fit your needs. These are two-port devices that transmit microwave or radio frequency power in one direction only and block the signal in the opposite direction. They can be thought of as a diode for RF energy. Isolators are used to isolate equipment from the effects of conditions outside of the equipment. For instance they are used to prevent a microwave source being detuned by a mismatched load. Pasternack's waveguide isolators feature excellent insertion loss, full WR band high isolation and reliability.

1 : $3,850.0
5 : $3,696.0
10 : $3,542.0
25 : $3,388.0

PE83CR002

Pasternack Enterprises

Key Specifications, Connector In Series: SMA, Connector In Gender: Female, Connector Out Series: SMA, Minimum Frequency: 8 GHz, Maximum Frequency: 18 GHz, Impedance: 50 Ohm, Maximum Insertion Loss: 1.5 dB, Maximum Input Power: 10 Watts, Minimum Isolation: 13 dB. Circulator with 13 dB Isolation from 8 GHz to 18 GHz, 10 Watts and SMA Female. RF circulator PE83CR002 from Pasternack is part of our extensive in-stock RF, microwave and millimeter wave components available for purchase. This RF circulator is manufactured with SMA connectors that are female. Our SMA circulator has a minimum frequency of 8 GHz and a maximum frequency of 18 GHz. This SMA coaxial circulator has a minimum isolation of 13 dB and a maximum input power of 10 Watts. PE83CR002 coaxial SMA circulator is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. Our radio frequency circulator can be bought and shipped worldwide the same-day as with our other in-stock RF parts.

1 : $530.99
10 : $509.75
25 : $488.51

PEW112TR001

Pasternack Enterprises

Key Specifications, Maximum Power: 5 Watt, Waveguide Size: WR-112, Minimum Frequency: 6.57 GHz, Maximum Frequency: 9.99 GHz. 5 Watts WR-112 Waveguide Load 6.57 GHz to 9.99 GHz Brass Copper with UG-51/U Flange. The PEW112TR001 is a WR-112 waveguide termination/load that operates in the frequency range of 6.57 GHz to 9.99 GHz. This WR-112 waveguide termination has a Max VSWR of 1.03:1. This waveguide termination design is made of painted brass and incorporates a UG-51/U flange. Waveguide terminations are part of Pasternack’s comprehensive waveguide product offerings which are available in stock and ready for same-day shipment.

1 : $711.99
5 : $697.75
10 : $683.51
25 : $669.27

PE-W12IR002

Pasternack Enterprises

Key Specifications. Minimum Frequency: 76 GHz Maximum Frequency: 78 GHz Waveguide size: WR-12 VSWR(Max): 1.4:1 Insertion Loss: 0.8 dB Isolation (min) : 15 dB Forward Power (CW)(Max): 2 Watts Forward Power (Peak): 20 Watts Reverse Power (CW)(Max): 0.2 Watts Reverse Power (Peak): 2 Watts. WR-12 Waveguide Isolator from 76 GHz to 78 GHz, 15 dB min Isolation, UG-387/U Cover Flange, Brass. The PE-W12IR002 is a Waveguide Isolator offering 15 dB minimum isolation over the E band frequency range of 76 to 78 GHz. The design achieves high isolation with wide band performance and the WR-12 waveguide uses UG-387/U Cover compatible flanges on all ports and has a power rating of 2 watts (CW). Pasternack offers a wide variety of isolators and waveguide isolators to fit your needs. These are two-port devices that transmit microwave or radio frequency power in one direction only and block the signal in the opposite direction. They can be thought of as a diode for RF energy. Isolators are used to isolate equipment from the effects of conditions outside of the equipment. For instance they are used to prevent a microwave source being detuned by a mismatched load. Pasternack's waveguide isolators feature excellent insertion loss, full WR band high isolation and reliability.

1 : $3,850.0
5 : $3,696.0
10 : $3,542.0
25 : $3,388.0

PE83IR002

Pasternack Enterprises

Key Specifications, Connector In Series: SMA, Connector In Gender: Female, Connector Out Series: SMA, Minimum Frequency: 1 GHz, Maximum Frequency: 2 GHz, Impedance: 50 Ohm, Maximum Insertion Loss: 0.75 dB, Maximum Input Power: 10 Watts, Minimum Isolation: 17 dB. Isolator with 17 dB Isolation from 1 GHz to 2 GHz, 10 Watts and SMA Female. Pasternack RF isolator PE83IR002 is part of our extensive in-stock RF, microwave and millimeter wave components available for purchase. This RF isolator is manufactured with SMA connectors that are female. Our SMA isolator has a minimum frequency of 1 GHz and a maximum frequency of 2 GHz. This SMA coaxial isolator has a minimum isolation of 17 dB and a maximum input power of 10 Watts. PE83IR002 coaxial SMA isolator is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. Our radio frequency isolator can be bought and shipped worldwide the same-day as with Pasternack's other in-stock RF parts.

1 : $572.99
10 : $550.07
25 : $527.15

PE83IR001

Pasternack Enterprises

Key Specifications, Connector In Series: SMA, Connector In Gender: Female, Connector Out Series: SMA, Minimum Frequency: 8 GHz, Maximum Frequency: 18 GHz, Impedance: 50 Ohm, Maximum Insertion Loss: 1.25 dB, Maximum Input Power: 10 Watts, Minimum Isolation: 16 dB. Isolator with 16 dB Isolation from 8 GHz to 18 GHz, 10 Watts and SMA Female. Pasternack RF isolator PE83IR001 is part of our extensive in-stock RF, microwave and millimeter wave components available for purchase. This RF isolator is manufactured with SMA connectors that are female. Our SMA isolator has a minimum frequency of 8 GHz and a maximum frequency of 18 GHz. This SMA coaxial isolator has a minimum isolation of 16 dB and a maximum input power of 10 Watts. PE83IR001 coaxial SMA isolator is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. Our radio frequency isolator can be bought and shipped worldwide the same-day as with Pasternack's other in-stock RF parts.

1 : $517.99
10 : $497.27
25 : $476.55

FMW10TR0001

Pasternack Enterprises

1 : $426.99
10 : $409.91
25 : $392.83
100 : $375.75

Venkel Ltd.

MELFC0102-UC-3R00DT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/5W;�50PPM;3R;�0.5%
RoHS : Compliant

MELFC0207-XK-2R00FT

VENKEL LTD

MELF Coated Thin Film CR;0207;1W;�100PPM;2R;�1%
RoHS : Compliant

PWCR0603-UL-1R00FT

VENKEL LTD

Pulse Withstanding CR;0603;1/3W;�200PPM;1R;�1%
RoHS : Compliant

PWCR0805-VL-2R00FT

VENKEL LTD

Pulse Withstanding CR;0805;1/2W;�200PPM;2R;�1%
RoHS : Compliant

CSMS1206-XH-R005FT

VENKEL LTD

Current Sense Metal Strip CR;1206;1W;�75PPM;5mR;�1%
RoHS : Compliant

CSMS1206-XK-R002JT

VENKEL LTD

Current Sense Metal Strip CR;1206;1W;�100PPM;2mR;�5%
RoHS : Compliant

CSMS2512-YH-R003JT

VENKEL LTD

Current Sense Metal Strip CR;2512;2W;�75PPM;3mR;�5%
RoHS : Compliant

CSMS2512-YK-R002JT

VENKEL LTD

Current Sense Metal Strip CR;2512;2W;�100PPM;2mR;�5%
RoHS : Compliant

HPCR0402-R-000T

VENKEL LTD

High Power CR;0402;1/8W;0R
RoHS : Compliant

HPCR1210-W-1R00FT

VENKEL LTD

High Power CR;1210;3/4W;1R;�1%
RoHS : Compliant

TA010PCJ107MDR0055

VENKEL LTD

Polymer Tantalum Capacitor J-Lead;10V;PCJ;100uF;�20%;D;55mR
RoHS : Compliant

TA010PCJ157MYR0055

VENKEL LTD

Polymer Tantalum Capacitor J-Lead;10V;PCJ;150uF;�20%;Y;55mR
RoHS : Compliant

TA010PCJ476MBR0070

VENKEL LTD

Polymer Tantalum Capacitor J-Lead;10V;PCJ;47uF;�20%;B;70mR
RoHS : Compliant

TA010TCR337KDR0065

VENKEL LTD

Tantalum Chip Capacitor;10V;TCR;330uF;10%;D;65mohm
RoHS : Compliant

TA010TCR477KER0050

VENKEL LTD

Tantalum Chip Capacitor;10V;TCR;470uF;10%;E;50mohm
RoHS : Compliant

Vyrian

Y14730R00500B0R

Vishay Precision Group Inc

Fixed Resistor, Metal Foil, 3W, 0.005ohm, 0.1% +/-Tol, 5ppm/Cel, Surface Mount, 3637
RoHS : Not Compliant

15,764

Y14880R00500B9W

Vishay Precision Group Inc

Fixed Resistor, Metal Strip, 3W, 0.005ohm, 0.1% +/-Tol, 15ppm/Cel, Surface Mount, 3637

13,710

ASMT-AR00-NRR00

Broadcom Limited

RoHS : Compliant

9,646

SN74HC374DWR-00

Texas Instruments

Bus Driver, HC/UH Series, 1-Func, 8-Bit, True Output, CMOS, PDSO20

9,452

ASMT-AR00-ARR00

Broadcom Limited

RoHS : Compliant

7,555

ASSR-322R-002ME

Broadcom Limited

6,906

SN74HCT563DWR-00

Texas Instruments

Bus Driver, HCT Series, 1-Func, 8-Bit, Inverted Output, CMOS, PDSO20

6,734

M29R008B-100N1TR

STMicroelectronics

6,676

ASMTAR00ARR00CATR

Broadcom Limited

6,667

ASCY-CR00-CU302

Broadcom Limited

RoHS : Compliant

6,250

SN74HC175DR-00

Texas Instruments

D Flip-Flop, HC/UH Series, 1-Func, Positive Edge Triggered, 4-Bit, Complementary Output, CMOS, PDSO16

5,545

ASMT-AR00-AQR00

Broadcom Limited

RoHS : Compliant

5,523

SN74HC677DWR-00

Texas Instruments

Address Comparator, HC/UH Series, 16-Bit, Inverted Output, CMOS, PDSO24

3,068

RS01035R00FB12

Vishay Intertechnologies

Fixed Resistor, Wire Wound, 10W, 35ohm, 1% +/-Tol, 20ppm/Cel, Through Hole Mount
RoHS : Not Compliant

873

RS0025R000FB12

Vishay Intertechnologies

Fixed Resistor, Wire Wound, 4W, 5ohm, 1% +/-Tol, 50ppm/Cel, Through Hole Mount
RoHS : Not Compliant

569

Waytek, Inc.

4200500OR00R3

ShawCor Ltd

DSG-Canusa CPX-100 polyolefin heat shrink tubing is orange tubing with a .500" size for insulating and protecting wires, terminals, and splices. Its flexible polyolefin construction supports clean shrink coverage, abrasion protection, and dependable electrical insulation in harness applications.

200 : $0.7067
1,000 : $0.647

1,200

4200750OR00R2

ShawCor Ltd

DSG-Canusa CPX-100 polyolefin heat shrink tubing is orange tubing with a .750" size for insulating and protecting wires, terminals, and splices. Its flexible polyolefin construction supports clean shrink coverage, abrasion protection, and dependable electrical insulation in harness applications.

100 : $1.1228
500 : $1.0279

900

4201000OR00R2

ShawCor Ltd

DSG-Canusa CPX-100 polyolefin heat shrink tubing is orange tubing with a 1.000" size for insulating and protecting wires, terminals, and splices. Its flexible polyolefin construction supports clean shrink coverage, abrasion protection, and dependable electrical insulation in harness applications.

100 : $1.7448
500 : $1.5975

600

VVAZR00-000

Carling Technologies

Red Contura II Actuator Soft Plastic w/ No Lens VVAZR00-000

4 : $3.4977
10 : $3.1743
50 : $2.9191
100 : $2.5377
200 : $2.3932
500 : $2.2878

433

VVARR00-000

Carling Technologies

Red Contura II Actuator Soft Plastic w/ Red Lens VVARR00-000

4 : $3.6144
10 : $3.2868
50 : $3.0301
100 : $2.6224
200 : $2.4594
500 : $2.3778

302