| データシートサーチシステム |
|
R12TBJ-R 販売店 |
| 販売店 | 部品番号 | メーカー | 部品情報 | Price | Qty. BuyNow | |
![]() Avnet Americas | CR1206-FX-2431ELF | Bourns Inc | - Tape and Reel (Alt: CR1206-FX-2431ELF) RoHS : Compliant |
| 25,000 | |
RLP73K3AR12FTDF![]() | TE Connectivity | - Tape and Reel (Alt: 2-2176057-7) RoHS : Compliant |
| 18,000 | ||
| CR1206-FX-4752ELF | Bourns Inc | - Tape and Reel (Alt: CR1206-FX-4752ELF) RoHS : Compliant |
| 10,000 | ||
| DR127-101-R | Eaton Corporation | Power Inductor (SMD), 100 ?H, 1.96 A, Shielded, 3.64 A, DR Series - Tape and Reel (Alt: DR127-101-R) RoHS : Compliant |
| 9,100 | ||
| CR1206-FX-5111ELF | Bourns Inc | SMD Chip Resistor, 5.11 kohm, ? 1%, 250 mW, 1206 [3216 Metric], Thick Film, General Purpose - Tape and Reel (Alt: CR1206-FX-5111ELF) RoHS : Compliant |
| 5,000 | ||
| CSR1206FT1R00 | SEI Stackpole Electronics Inc | - Tape and Reel (Alt: CSR1206FT1R00) RoHS : Compliant |
| 5,000 | ||
| SRR1280-470M | Bourns Inc | - Tape and Reel (Alt: SRR1280-470M) RoHS : Compliant |
| 2,400 | ||
| MS3108R12S-3S | ITT Interconnect Solutions | - Bulk (Alt: MS3108R12S-3S) RoHS : Not Compliant |
| 50 | ||
| FS13MR12W2M1HC55BPSA1 | Infineon Technologies AG | - Trays (Alt: FS13MR12W2M1HC55BPSA1) RoHS : Compliant |
| 15 | ||
| FF6MR12W2M1HB11BPSA1 | Infineon Technologies AG | - Trays (Alt: FF6MR12W2M1HB11BPSA1) RoHS : Compliant |
| 15 | ||
| FS13MR12W2M1HB70BPSA1 | Infineon Technologies AG | Silicon Carbide MOSFET, SixPack, Six N Channel, 62.5 A, 1.2 kV, 0.0117 Ohm, Module, 44 Pins - Trays (Alt: FS13MR12W2M1HB70BPSA1) RoHS : Compliant |
| 15 | ||
| FZ900R12KE4HOSA1 | Infineon Technologies AG | - Trays (Alt: FZ900R12KE4HOSA1) RoHS : Compliant |
| 10 | ||
| FP100R12W3T7B11BPSA1 | Infineon Technologies AG | - Trays (Alt: FP100R12W3T7B11BPSA1) RoHS : Compliant |
| 8 | ||
| FP75R12W3T7B11BPSA1 | Infineon Technologies AG | - Trays (Alt: FP75R12W3T7B11BPSA1) RoHS : Compliant |
| 8 | ||
| FS100R12W3T7B11BPSA1 | Infineon Technologies AG | - Trays (Alt: FS100R12W3T7B11BPSA1) RoHS : Compliant |
| 8 | ||
![]() Newark | AVR128DB48T-E/6LX | Microchip Technology Inc | Mcu, 8Bit, 24Mhz, Vqfn-Ep-48; |Microchip Technology AVR128DB48T-E/6LX RoHS : Compliant |
| 3,201 | |
| AVR128DB48T-E/6LX | Microchip Technology Inc | Mcu, 8Bit, 24Mhz, Vqfn-Ep-48; |Microchip Technology AVR128DB48T-E/6LX RoHS : Compliant |
| 3,201 | ||
| RLW73B2FR12TDF | TE Connectivity | Res, R12, 1%, 0.75W, 0612 W, Thick Film; |Te Connectivity Cgs RLW73B2FR12TDF RoHS : Compliant |
| 1,000 | ||
| RLW73B2FR12TDF | TE Connectivity | Res, R12, 1%, 0.75W, 0612 W, Thick Film; |Te Connectivity Cgs RLW73B2FR12TDF RoHS : Compliant |
| 1,000 | ||
| RR1220P-182-B-T5 | Susumu Co Ltd | Chip Res Smd, 1K8, ±0.1%, 100Mw; |Susumu RR1220P-182-B-T5 RoHS : Compliant |
| 688 | ||
| RR1220P-182-B-T5 | Susumu Co Ltd | Chip Res Smd, 1K8, ±0.1%, 100Mw; |Susumu RR1220P-182-B-T5 RoHS : Compliant |
| 688 | ||
| AC3630R-12NG | Bourns Inc | Air Coil Inductor, 12.5Nh, 4A, 3.3Ghz; |Bourns, Inc. AC3630R-12NG RoHS : Compliant |
| 440 | ||
| AC3630R-12NG | Bourns Inc | Air Coil Inductor, 12.5Nh, 4A, 3.3Ghz; |Bourns, Inc. AC3630R-12NG RoHS : Compliant |
| 440 | ||
| AVR128DB64-I/PT | Microchip Technology Inc | 128Kb, 8Kb Ram, 64P, 24Mhz, 3Xopamp, Mvi; |Microchip Technology AVR128DB64-I/PT RoHS : Compliant |
| 320 | ||
| RER1.25-S6-X | Panduit Corp | Harness Board Wire Retnr; |Panduit RER1.25-S6-X RoHS : Not Compliant |
| 268 | ||
| AVR128DB64-I/PT | Microchip Technology Inc | Mcu, 8Bit, 24Mhz, Tqfp-64; |Microchip Technology AVR128DB64-I/PT RoHS : Compliant |
| 256 | ||
PR12-5V-360-1C![]() | Same Sky | Power Relay, Spdt, 5Vdc, 10A, Pc Pin; |Same Sky PR12-5V-360-1C RoHS : Compliant |
| 55 | ||
| RER1.25-S6-X | Panduit Corp | Replaceable Elastic Retainers; Accessory Type:Harness Board Cable Bundle Elastic Retainer; For Use With:Harness Boards; Product Range:Quick-Build Series; Body Material:Nylon 6.6; Cable Bundle Diameter Max:1.25"; Colour:Black Rohs Compliant: Na RoHS : Not Compliant |
| 8 | ||
| F48MXTR12C2M2QH11BPSA1 | Infineon Technologies AG | Sic Mosfet, N-Ch, 1.2Kv, 100A, Module; |Infineon Technologies F48MXTR12C2M2QH11BPSA1 RoHS : Compliant |
| 2 | ||
| HLR125/1H(DC)600V/S | Eaton Corporation | Solid State Relay, 125A, 32Vdc, Din Rail; |Eaton Moeller HLR125/1H(DC)600V/S RoHS : Compliant |
| 1 | ||
![]() Analog Devices Inc | MAX6138BEXR12+T | Analog Devices Inc | 0.1, 25ppm, SC70 Shunt Voltage RoHS : Compliant |
| 100,505 | |
| MAX6018BEUR12+T | Analog Devices Inc | Precision, Micropower, 1.8V Su RoHS : Compliant |
| 12,829 | ||
ADR127BUJZ-REEL7![]() | Analog Devices Inc | mcropower reference with sink/ RoHS : Compliant |
| 1,088 | ||
| MAX6138AEXR12+ | Analog Devices Inc | 0.1, 25ppm, SC70 Shunt Voltage RoHS : Compliant | 997 | |||
| MAX6138CEXR12+ | Analog Devices Inc | 0.1, 25ppm, SC70 Shunt Voltage RoHS : Compliant | 975 | |||
ADR127AUJZ-REEL7![]() | Analog Devices Inc | Micropower reference with sink RoHS : Compliant |
| 782 | ||
| MAX6018AEUR12+T | Analog Devices Inc | Precision, Micropower, 1.8V Su RoHS : Compliant |
| 534 | ||
| MAX6138CEXR12+T | Analog Devices Inc | 0.1, 25ppm, SC70 Shunt Voltage RoHS : Compliant |
| 482 | ||
| MAX6138BEXR12+ | Analog Devices Inc | 0.1, 25ppm, SC70 Shunt Voltage RoHS : Compliant | 393 | |||
| MAX6138AEXR12+T | Analog Devices Inc | 0.1, 25ppm, SC70 Shunt Voltage RoHS : Compliant |
| 369 | ||
| MAX6018BEUR12+ | Analog Devices Inc | Precision, Micropower, 1.8V Su RoHS : Compliant | 0 | |||
| MAX6018AEUR12+ | Analog Devices Inc | Precision, Micropower, 1.8V Su RoHS : Compliant | 0 | |||
![]() RS | FNQ-R-1/2 (FNQ-R-1-2) | Eaton Bussmann | FUSE, CLASS CC, TIME-DELAY, 1/2 A, 600 VAC, 0.41 +/-0.005 IN., CC-TRON/FNQ-R |
| 337 | |
| LTGQC501-TB-B-R/12V (4LT-19435598|LTGQC501-TB-B-R/12V|LTGQC501TBBR/12V) | Carling Technologies | SWITCH, ROCKER, DP, ON-NONE-OFF, BLK ACT, RED LENS, ILLUM,12V INCAND,15A,125VAC, QC |
| 101 | ||
| ESD-SR-120 (UECESDSR120000) | KEMET Corporation | OPENABLE FERRITE RING, FOR CONSUMER ELECTRONICS,16X33X16.4MM, APERTURES:1,DIA 6MM |
| 60 | ||
| RER1.25-S6-X | Panduit Corp | WIRE RETAINER, ELASTIC HARNESS, 1.25" (31.8MM) BUNDLE, #6 SCREW (M3), NYLON 6. |
| 30 | ||
| 311XBXPR-120VAC (A311XBXPR-120VAC) | Struthers-Dunn | 311 SERIES - INDUSTRIAL SEQUENCING RELAYS, DPDT 5 AMP CONTACTS, 120VAC COIL |
| 20 | ||
| A22TK-2LR-12-K01 (A22TK2LR12K01) | OMRON Industrial Automation | SWITCH, KEY, DPST - NC + SPST - NO |
| 10 | ||
| ISOBAR12/20 UL (IBAR12/20ULTRA) | Tripp Lite | SURGE SUPPRESSOR, 12 OUTLET, SHEET METAL, 20A, 120V, POWER CORD, ISOBAR SERIES |
| 5 | ||
| 6203-2RLD-NR-12 (PER.6203-2RLDNR12) | PEER Bearing Company | DEEP GROOVE BALL BEARING, ID 17 MM, OD 40 MM, W 12 MM |
| 5 | ||
| RER1.25-S6-X | Panduit Corp | WIRE RETAINER, ELASTIC HARNESS, 1.25" (31.8MM) BUNDLE, #6 SCREW (M3), NYLON 6.6 |
| 3 | ||
| E39-R12 (E39R12) | OMRON Industrial Automation | E3C-L REFLECTOR 23MM X 23MM |
| 3 | ||
| R12 | SKF | DEEP GROOVE BALL BEARING, I.D. 0.75 IN, O.D. 1.625 IN, W 0.3125 IN |
| 2 | ||
| PR-12E-3-100-3/16-4 | Omega Engineering | RTD'S, RTD'S MOUNTED IN HEADS |
| 2 | ||
| PSR12-600-70 (1SFA896106R7000) | ABB Low Voltage Products and Systems | SOFTSTARTER, COMPACT, 600V / 240VAC, 11 A, PSR SERIES |
| 2 | ||
| 99R12 (PER.99R12-DV2) | PEER Bearing Company | RADIAL BALL BEARING |
| 1 | ||
| R12SSG165REDQ1 (R12SSG165-RED) | Caplugs | R12SSG-RED .39-.66IN HOSE OD 3/8 |
| 1 | ||
![]() STMicroelectronics | M4T28-BR12SH1![]() | STMicroelectronics | SNAPHAT® 48 mAh lithium coin cell battery with crystal RoHS : Compliant |
| 12,956 | |
VIPER12ASTR-E![]() | STMicroelectronics | Fixed frequency off line converter RoHS : Compliant |
| 11,271 | ||
M4T32-BR12SH6![]() | STMicroelectronics | SNAPHAT® 120 mAh lithium coin cell battery with crystal RoHS : Compliant |
| 5,640 | ||
M4T32-BR12SH1![]() | STMicroelectronics | SNAPHAT® 120 mAh lithium coin cell battery with crystal RoHS : Compliant |
| 4,797 | ||
VIPER12AS-E![]() | STMicroelectronics | SMPS primary IC RoHS : Compliant |
| 3,516 | ||
| VIPER122LSTR | STMicroelectronics | High voltage converter RoHS : Compliant |
| 839 | ||
VIPER12ADIP-E![]() | STMicroelectronics | SMPS primary IC RoHS : Compliant |
| 121 | ||
| 2STR1215 | STMicroelectronics | _ RoHS : Compliant |
| 25 | ||
![]() Microchip Technology Inc | AVR128DB48T-E/6LX | Microchip Technology Inc | 128KB, 8KB RAM, 48p, 24MHz, 3xOPAMP, MVIO, 12b ADC, 3xZCD, DAC, UART, 2xSPI, TWI, VQFN, Projected EOL: 2046-10-20 RoHS : Compliant |
| 6,600 | |
| AVR128DA48-I/6LX | Microchip Technology Inc | 128KB, 16KB RAM, 48p, 24MHz, 12b ADC, 3xComp, PTC, 3xZCD, DAC, UART, SPI, TWI, VQFN, Projected EOL: 2046-03-16 RoHS : Compliant |
| 4,329 | ||
| AVR128DA64S-I/PT | Microchip Technology Inc | 128KB, 16KB RAM, 64p, 24MHz, PDID, 12b ADC, 3xComp,PTC,3xZCD,DAC,UART,SPI,TWI, TQFP, Projected EOL: 2051-09-11 RoHS : Compliant |
| 2,720 | ||
| AVR128DA32-I/PT | Microchip Technology Inc | 128KB, 16KB RAM, 32p, 24MHz, 12b ADC, 3xComp, PTC, 3xZCD, DAC, UART, SPI, TWI, TQFP, Projected EOL: 2046-03-16 RoHS : Compliant |
| 2,200 | ||
| AVR128DB28T-I/SS | Microchip Technology Inc | 128KB, 8KB RAM, 28p, 24MHz, 3xOPAMP, MVIO, 12b ADC, 3xZCD, DAC, UART, 2xSPI, TWI, SSOP, Projected EOL: 2045-11-03 RoHS : Compliant |
| 2,100 | ||
| AVR128DA48-E/6LXVAO | Microchip Technology Inc | 128KB, 16KB RAM, 48p, 24MHz, 12b ADC, 3xComp, PTC, 3xZCD, DAC, UART, SPI, TWI, VQFN, Projected EOL: 2051-04-08 RoHS : Compliant |
| 1,403 | ||
| AVR128DB28-E/SO | Microchip Technology Inc | 128KB, 8KB RAM, 28p, 24MHz, 3xOPAMP, MVIO, 12b ADC, 3xZCD, DAC, UART, 2xSPI, TWI, SOIC, Projected EOL: 2046-10-20 RoHS : Compliant |
| 1,090 | ||
| AVR128DB64-E/PT | Microchip Technology Inc | 128KB, 8KB RAM, 64p, 24MHz, 3xOPAMP, MVIO, 12b ADC, 3xZCD, DAC, UART, 2xSPI, TWI, TQFP, Projected EOL: 2046-10-20 RoHS : Compliant |
| 1,015 | ||
| AVR128DB28-I/SS | Microchip Technology Inc | 128KB, 8KB RAM, 28p, 24MHz, 3xOPAMP, MVIO, 12b ADC, 3xZCD, DAC, UART, 2xSPI, TWI, SSOP, Projected EOL: 2046-07-27 RoHS : Compliant |
| 517 | ||
| AVR128DA48T-E/6LX | Microchip Technology Inc | 128KB, 16KB RAM, 48p, 24MHz, 12b ADC, 3xComp, PTC, 3xZCD, DAC, UART, SPI, TWI, VQFN, Projected EOL: 2046-04-24 RoHS : Compliant |
| 400 | ||
| AVR128DA64-I/MR | Microchip Technology Inc | 128KB, 16KB RAM, 64p, 24MHz, 12b ADC, 3xComp, PTC, 3xZCD, DAC, UART, SPI, TWI, QFN, Projected EOL: 2046-03-16 RoHS : Compliant |
| 260 | ||
| AVR128DB64-I/MR | Microchip Technology Inc | 128KB, 8KB RAM, 64p, 24MHz, 3xOPAMP, MVIO, 12b ADC, 3xZCD, DAC, UART, 2xSPI, TWI, QFN, Projected EOL: 2046-07-27 RoHS : Compliant |
| 60 | ||
| AVR128DB64-I/PT | Microchip Technology Inc | 128KB, 8KB RAM, 64p, 24MHz, 3xOPAMP, MVIO, 12b ADC, 3xZCD, DAC, UART, 2xSPI, TWI, TQFP, Projected EOL: 2046-07-27 RoHS : Compliant |
| 56 | ||
| APT85GR120JD60 | Microchip Technology Inc | IGBT MOS 8 1200 V 85 A SOT-227, SOT-227, Projected EOL: 2046-04-30 RoHS : Compliant |
| 29 | ||
| AVR128DB48T-I/6LX | Microchip Technology Inc | 128KB, 8KB RAM, 48p, 24MHz, 3xOPAMP, MVIO, 12b ADC, 3xZCD, DAC, UART, 2xSPI, TWI, VQFN, Projected EOL: 2045-11-03 RoHS : Compliant |
| 25 | ||
![]() Bisco Industries | AN526-832R12 | AN Screws | 770 | |||
| CFR-12JB-470R | YAGEO Corporation | RoHS : Compliant | 735 | |||
| 1-R-125 | MISCELLANEOUS | 676 | ||||
| S810R126 | UMPCO Inc | 360 | ||||
| CFR-12JB-52-100R | YAGEO Corporation | RoHS : Compliant | 200 | |||
| AN526C832R12 | AN Screws | 137 | ||||
| R12NCFMA1-62 | Continental-Aero | 135 | ||||
| BR1-226-01BK | Essentra Components | 135 | ||||
| CR-1/2-XBC | MISC. BEARINGS/BUSHINGS | 100 | ||||
| CER-1257-1A-CT-N1 | Staffall | 33 | ||||
| RR-125 | O-RINGS | 32 | ||||
| AN526C632R12 | Crescent Manufacturing | 21 | ||||
| MS25281-R12 | Essentra Components | 6 | ||||
| MS25281-R12 | MS CLAMPS | 3 | ||||
| M83723/95R1203N | Conesys | 1 | ||||
![]() Rochester Electronics | FD400R12KE3HOSA1 | Infineon Technologies AG | IGBT MOD 1.2kV 580A 2kW Module Tray RoHS : Compliant |
| 16 | |
| FP100R12W3T7B11BPSA1 | Infineon Technologies AG | FPXR12W3X7J - IGBT MOD 1.2kV 100A 20mW Module Carton RoHS : Compliant |
| 277 | ||
| FP150R12N3T4PB81BPSA1 | Infineon Technologies AG | FP150R12N3T4P_B81 - Low Power Econo RoHS : Compliant |
| 126 | ||
| FP35R12W2T7BPSA1 | Infineon Technologies AG | FP35R12W2T7 - Low Power Easy RoHS : Compliant |
| 12 | ||
| FS200R12KT4RPBPSA1 | Infineon Technologies AG | Insulated Gate Bipolar Transistor, 280A I(C), 1200V V(BR)CES, N-Channel RoHS : Compliant |
| 1 | ||
| FS33MR12W1M1HPB11BPSA1 | Infineon Technologies AG | EasyPACK module with CoolSiC Trench MOSFET and PressFIT / NTC RoHS : Compliant |
| 20 | ||
| FZ2400R12HE4B9NPSA1 | Infineon Technologies AG | Insulated Gate Bipolar Transistor, 3560A I(C), 1200V V(BR)CES, N-Channel RoHS : Not Compliant |
| 1 | ||
| IRFR120NTRLPBF | Infineon Technologies AG | MOSFET N-Channel 100V 9.4A (Tc) TO-252-3 T/R RoHS : Compliant |
| 32,285 | ||
| DF75R12W1H4FB11BOMA2 | Infineon Technologies AG | IGBT MOD 1.2kV 25A 20mW Module Tray RoHS : Compliant |
| 960 | ||
| FF23MR12W1M1PB11BPSA1 | Infineon Technologies AG | IGBT MOD 1.2kV 50A 20mW Module Tray RoHS : Compliant |
| 50 | ||
ADR127AUJZ-R2![]() | Analog Devices Inc | IC VOL REF Series Fixed 1.25V 5mA ±0.24% SOT-23-6 T/R RoHS : Compliant |
| 11 | ||
IRFR120NTRLPBF![]() | International Rectifier | MOSFET N-Channel 100V 9.4A (Tc) TO-252-3 T/R RoHS : Compliant |
| 1,065 | ||
| R1204K312A-TR | Nisshinbo Micro Devices | IC VOLT REG Adjustable Step-Up Boost 1 OUT 200mV 700mA (Switch) 6-SON T/R RoHS : Compliant |
| 20,000 | ||
| BCR12FM-12LB#BB0 | Renesas Electronics Corporation | TRIAC Standard 600V 12A TO-220-3 Tube RoHS : Compliant |
| 28 | ||
R1211D002A-TR-FE![]() | Ricoh Electronic Devices Co Ltd | IC VOLT REG PWM Step-Up Boost 1 OUT 2.5V - 6V 6-SMD T/R RoHS : Compliant |
| 32,640 | ||
![]() Sager | QS83XXHR12 | IDEC Corporation | LED INDICATOR QS8 SNAP IN |
| 0 | |
| R-12269-2 | TE Connectivity | RTD,SM,KA,P100,385,.5%,.060T | 0 | |||
| R-12339-4 | TE Connectivity | RTD,SM,KA,P100,385,.12%,.024T |
| 0 | ||
| R12P09S/R8 | RECOM Power GmbH | Isolated DC/DC Converters - Through Hole 1W DC/DC 8kV UNREG 12Vin 9Vout RoHS : Compliant |
| 0 | ||
| R12P209S/P/X2/R6.4 | RECOM Power GmbH | Isolated DC/DC Converters - Through Hole 2W DC/DC 6.4kV UNREG 12Vin 9Vout RoHS : Compliant |
| 0 | ||
| R12P212D | RECOM Power GmbH | Isolated DC/DC Converters - Through Hole 2W DC/DC 5.2kV UNREG 12Vin +/-12Vout RoHS : Compliant |
| 0 | ||
| PHR-12200B | Power-Sonic Corporation | Sealed Lead Acid Battery | 0 | |||
| MVR1-27-12-N3-00016 | ABB Group | MVR RECLOSER,1PH,27KV,12.5KA,800A |
| 0 | ||
| RER1.25-S6-X | Panduit Corp | Cable Mounting & Accessories ELASTIC RETAINER |
| 0 | ||
| PWBCVR12WH | Panduit Corp | WIRE BASKET METAL COVER, 12 (300MM) W, 118 (3M) L MADE UP OF 3-PIECES, WHITE |
| 0 | ||
| PWR-129 | Murata Power Solutions | Isolated DC/DC Converters - Through Hole | 0 | |||
| Q14F5ARXXHR12E | IDEC Corporation | LED INDICATOR 14MM |
| 0 | ||
| Q16F1BXXR12AE | IDEC Corporation | LED INDICATOR 16MM |
| 0 | ||
| Q8F5BXXR12E | IDEC Corporation | LED INDICATOR 8MM |
| 0 | ||
| A22RW2AR12A01 | OMRON Electronic Components | DIP Switches / SIP Switches Selector SW,1NC,Red | 0 | |||
![]() Coilcraft Direct | 0603CS-R12XJR | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 50,201 | |
| 0603CS-R12XJLW | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS RoHS : Compliant |
| 46,662 | ||
| 0402CS-R12XGR | Coilcraft Inc | RF Inductor, ceramic core, 2% toll, SMT, RoHS, halogen-free RoHS : Compliant |
| 18,437 | ||
| 0603DC-R12XJR | Coilcraft Inc | RF Inductor, ceramic core, 5% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 6,845 | ||
| 0805HT-R12TJRC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS Halogen Free RoHS : Compliant |
| 3,300 | ||
| 0603HP-R12XJEW | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS Halogen Free RoHS : Compliant |
| 1,790 | ||
| 0402HPH-R12XGRW | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 1,305 | ||
| POE72PR-12ED | Coilcraft Inc | PoE transformer, isolation, SMT, RoHS, halogen-free RoHS : Compliant |
| 354 | ||
| 0603CS-R12XGEW | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 21 | ||
| MVR1251T-361MLC | Coilcraft Inc | Power inductor, shielded, 20% tol, SMT, RoHS RoHS : Compliant |
| 15 | ||
| MVR1247C-361MLC | Coilcraft Inc | Power inductor, shielded, 20% tol, SMT, RoHS RoHS : Compliant |
| 4 | ||
| MVR1251T-561MLC | Coilcraft Inc | Power inductor, shielded, 20% tol, SMT, RoHS RoHS : Compliant |
| 0 | ||
| 0402HPH-R12XJE | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS, halogen-free RoHS : Compliant | 0 | |||
| 0402HPH-R12XHRW | Coilcraft Inc | RF inductor, ceramic core, 3% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 0 | ||
| 0603CS-R12XHR | Coilcraft Inc | RF inductor, ceramic core, 3% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 0 | ||
![]() TME | SI2E100612-R12L-R125 | YAGEO Corporation | Inductor: wire |
| 7,800 | |
| GWCR1210-2K0FT5 | TT Electronics plc | Resistor: thick film |
| 5,000 | ||
| W0805R121001A-R1 | TT Electronics plc | Resistor: thick film |
| 2,000 | ||
| F426FR125J630C | YAGEO Corporation | Capacitor: polypropylene; 1.2uF; 630VDC; 31.5x17.5x28mm; 27.5mm |
| 857 | ||
| PR12-4AO | Autonics Corporation | Sensor: inductive; OUT: 2-wire NO; 0÷4mm; 85÷264VAC; M12; 2m; IP67 |
| 19 | ||
| PCSH-M23R-12P-FF-SL7001-00Z(H) | Degson Electronics Co Ltd | Connector: M23; industrial |
| 18 | ||
| R12P212D | RECOM Power GmbH | Converter: DC/DC; 2W; Uin: 10.8÷13.2VDC; Uout: 12VDC; Uout2: -12VDC RoHS : Compliant |
| 1 | ||
| RER1.25-S6-X | Panduit Corp | Screw mounted clamp; Øbundle : 31.8mm; polyamide; black; W: 30mm |
| 0 | ||
| PWR12JTEA1001 | Viking Technology | Resistor: thick film; 1kΩ; SMD; 2512; 1.5W; ±5%; 500V; -55÷155°C |
| 0 | ||
| PWR12JTEA4701 | Viking Technology | Resistor: thick film; 4.7kΩ; SMD; 2512; 1.5W; ±5%; 500V; -55÷155°C |
| 0 | ||
| 1SBL347001R1222 | ABB Low Voltage Products and Systems | Contactor: 3-pole; NO x3; Auxiliary contacts: NO x2 + NC x2; 40A |
| 0 | ||
| 1SBL367201R1200 | ABB Low Voltage Products and Systems | Contactor: 4-pole; NO x4; 48÷130VAC,48÷130VDC; 52A |
| 0 | ||
| AM1DR-1203SLPZ | Aimtec | Converter: DC/DC; 1W; Uin: 11.4÷12.6VDC; Uout: 3.3VDC; Iout: 250mA RoHS : Compliant |
| 0 | ||
| HLR125/1H(DC)600V/S | Eaton Corporation | Relay: solid state; Ucntrl: 4÷32VDC; 125A; 42÷660VAC; HLR; 1-phase |
| 0 | ||
| F3L75R12W1H3B27BOMA1 | Infineon Technologies AG | Module: IGBT; NTC thermistor; AG-EASY1B-2; Inverter; 275W RoHS : Compliant |
| 0 | ||
![]() Ameya Holding Limited | RR1220Q-33R2-D-M | Susumu Co Ltd | RoHS : Compliant | 50,000 | ||
| EDZVT2R12B | ROHM Semiconductor | Zener Diodes RoHS : Compliant |
| 16,000 | ||
| MCR18LEQPJLR12 | ROHM Semiconductor | 3216(1206)尺寸 大功率保证型 方形贴片电阻器(符合AEC-Q200标准) RoHS : Compliant |
| 10,000 | ||
| PDZVTFTR12B | ROHM Semiconductor | 齐纳二极管(AEC-Q101标准) RoHS : Compliant |
| 7,900 | ||
| UMR12NTN | ROHM Semiconductor | Switching Diodes RoHS : Compliant |
| 7,400 | ||
VIPER12AS-E![]() | STMicroelectronics | IC: driver; buck,buck-boost,flyback; SO8; 0.4A; 730V; Channels: 1 RoHS : Compliant | 6,076 | |||
| LTR18EZPFLR120 | ROHM Semiconductor | High Power Chip Resistors <Wide Terminal Type> RoHS : Compliant |
| 5,000 | ||
| RR1220P-6492-D-M | Susumu Co Ltd | RoHS : Compliant | 5,000 | |||
| MNR12E0APJ221 | ROHM Semiconductor | RoHS : Compliant |
| 4,900 | ||
| MCR50LJQPFLR120 | ROHM Semiconductor | 5025(2010)尺寸、大功率厚膜贴片电阻器/低阻值(AEC-Q200认证产品) |
| 4,000 | ||
| MCR100LJQPFLR120 | ROHM Semiconductor | 6432(2512)尺寸、大功率厚膜贴片电阻器/低阻值(AEC-Q200认证) |
| 4,000 | ||
| MCR100LJQPJLR12 | ROHM Semiconductor | 6432(2512)尺寸高功率厚膜片式电阻器/低阻值(AEC-Q200认证) |
| 4,000 | ||
| LTR100JZPFLR120 | ROHM Semiconductor | High Power Chip Resistors <Wide Terminal Type> RoHS : Compliant |
| 4,000 | ||
LMR12010XMK/NOPB![]() | Texas Instruments | RoHS : Compliant | 1,000 | |||
| PBZTBR12.2B | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
![]() ComSIT USA | ACS716KLATR12CBT | ALLEGRO MICROSYSTEMS INC | AVAILABLE EU | 1,706 | ||
| MR12X69R8FTL | Walsin Technology Corporation | AVAILABLE EU RoHS : Compliant | 1,053,750 | |||
| RR1220P1022DT5C | THIN FILM TECHNOLOGY | AVAILABLE EU | 22,658 | |||
| MR12X71R5FTLV | Walsin Technology Corporation | AVAILABLE EU | 348,750 | |||
| MR12X18R0FTL | Walsin Technology Corporation | AVAILABLE EU RoHS : Compliant | 271,560 | |||
| WR12X1001FTL | AVAILABLE EU | 7,447 | ||||
| WR12X1301FTL | Walsin Technology Corporation | AVAILABLE EU RoHS : Compliant | 819,403 | |||
| MR12X62R0FTLV | Walsin Technology Corporation | AVAILABLE EU | 425,639 | |||
| MR12W7R50FTL | Walsin Technology Corporation | AVAILABLE EU RoHS : Compliant | 660,353 | |||
| WR12X10R0FTL | Walsin Technology Corporation | AVAILABLE EU RoHS : Compliant | 764,671 | |||
| MR12X61R9FTLV | Walsin Technology Corporation | AVAILABLE EU | 1,736,437 | |||
| WR12X1500FTLJ | Walsin Technology Corporation | AVAILABLE EU RoHS : Compliant | 7,493 | |||
| MR12X75R0FTLV | Walsin Technology Corporation | AVAILABLE EU | 783,167 | |||
| MR12X13R0FTL | Walsin Technology Corporation | AVAILABLE EU RoHS : Compliant | 288,481 | |||
| MR12X3300FTL | Walsin Technology Corporation | AVAILABLE EU RoHS : Compliant | 1,584,222 | |||
![]() ComSIT USA | IR1221CTR8CATG | Everlight Electronics Co Ltd | Infrared Emitter 940nm 40mW/sr Rectangular Top Mount 2-Pin Chip LED T/R RoHS : Compliant | 30,000 | ||
| ILBB0603ER121V | Vishay Semiconductors | Ferrite Chip, 1 Function(s), 0.15A, 2 Pin(s) RoHS : Compliant | 29,001 | |||
| PWR12FTEA0470 | Viking Technology | PULSE WITHSTANDING CHIP RESISTOR Fixed Resistor, Metal Glaze/thick Film, 1.5W, 47ohm, 500V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 2512 RoHS : Compliant | 20,000 | |||
| CR12320F3 | Hokuriku Electric Industry Co Ltd | Resistor RoHS : Compliant | 17,682 | |||
| STPR120A | SGS Semiconductor Ltd | HIGH EFFICIENCY FAST RECOVERY DIODE Rectifier Diode, 1 Phase, 1 Element, 1A, 200V V(RRM), Silicon RoHS : Not Compliant | 7,515 | |||
| SAFEF1G57KA0F00R12 | Murata Manufacturing Co Ltd | SAW FILTER FOR GPS SAW Filter, 1 Function(s), 1575.5MHz, 4 Pin(s), Plastic RoHS : Compliant | 5,840 | |||
| SRR1206151KL | Bourns Inc | SHIELDED HIGH POWER INDUCTOR General Purpose Inductor, 150uH, 10%, 1 Element, Ferrite-Core, SMD, 5050 RoHS : Compliant | 528 | |||
| CDR125NP101MC | Sumida Corporation | General Purpose Inductor, 100uH, 20%, 1 Element, SMD, 5046 RoHS : Compliant | 500 | |||
| SRR1208221KL | Bourns Inc | SHIELDED HIGH POWER INDUCTOR General Purpose Inductor, 220uH, 10%, 1 Element, Ferrite-Core, SMD, 5050 RoHS : Compliant | 395 | |||
| SRR1208150ML | Bourns Inc | SHIELDED HIGH POWER INDUCTOR General Purpose Inductor, 15uH, 20%, 1 Element, Ferrite-Core, SMD, 5050 RoHS : Compliant | 275 | |||
| KH208810B0R12 | Vitrohm Portuguesa LDA | Fixed Resistor, Wire Wound, 5W, 0.12ohm, 0.77V, 10% +/-Tol, 350,450ppm/Cel, Through Hole Mount RoHS : Compliant | 200 | |||
| ACCKITFOR12XSEMIPACK1THYR | SEMIKRON | Electronic Component RoHS : Not Compliant | 45 | |||
| FP100R12KT4B11 | Infineon Technologies AG | IGBT-MODULE Insulated Gate Bipolar Transistor, 100A I(C), 1200V V(BR)CES, N-Channel RoHS : Compliant | 5 | |||
| FF150R12KE3GB2 | Infineon Technologies AG | IGBT-MODULE Insulated Gate Bipolar Transistor, 225A I(C), 1200V V(BR)CES, N-Channel RoHS : Compliant | 5 | |||
| E6DW12R1212 | Deutronic Elektronik GmbH | Analog Circuit RoHS : Compliant | 5 | |||
![]() Interstate Connecting Components | RER1.25-S6-X | Panduit Corp | ELASTIC RETAINER, REP,1.25 (31.8mm) Bundle, #6 Screw (M3) |
| 9 | |
| R-12339-4 | TE Connectivity | RTD,SM,KA,P100,385,.12%,.024T | 0 | |||
| MWDM3L-100SBR-.125 | Glenair Inc | RoHS : Not Compliant | 0 | |||
| NAJ6R12-8S | Amphenol Aerospace | 0 | ||||
| 901-20 R 121-91 PN 1A | TE Connectivity | 901-20 R 121-91 PN 1A | 0 | |||
| 902-92 R 121-93 PN | TE Connectivity | 902-92 R 121-93 PN | 0 | |||
| 951-02 R 12-10 P 50 | TE Connectivity | ZPF000000000006340 |
| 0 | ||
| 851-02R12-3PY50 | SOURIAU-SUNBANK | Flanschdose Crimp | 0 | |||
| 851-02R12-3SY50-EMT | SOURIAU-SUNBANK | Flanschdose crimp | 0 | |||
| 851-06R12-10S50 L/C | SOURIAU-SUNBANK | SQUARE FLANGE RECEPTACLE W/O B |
| 0 | ||
| 851-07R12-10PX54 | SOURIAU-SUNBANK | Einlochflanschdose Crimp | 0 | |||
| 85107R128S5044 | SOURIAU-SUNBANK | J3802 RoHS : Compliant | 0 | |||
| 470FS013ZR123B-T | Glenair Inc | STARSHIELD/IUS ADAPTERS | 0 | |||
| 620-053ZR12A | Glenair Inc | 620-053ZR12A BACKSHELL RoHS : Compliant | 0 | |||
| S9028PCR12NFB | TE Connectivity | PANEL,RHCP,12IN,NF | 0 | |||
![]() NexGen Digital | DR125-150-R | Eaton Bussmann | 11,902 | |||
| UC21R122M | SANYO Semiconductor Co Ltd | 7,000 | ||||
| CR1206-43R0FTR | YAGEO Corporation | 5,000 | ||||
| CR1206-4-W-1003FT | VENKEL LTD | 5,000 | ||||
| CR1206-4W-274JT | VENKEL LTD | RoHS : Compliant | 5,000 | |||
| RR1220P-114-B | Susumu Co Ltd | RoHS : Compliant | 3,951 | |||
| CR1206-8W-2210FT | VENKEL LTD | RoHS : Compliant | 2,813 | |||
| RR1220P-101-B-T5 | Susumu Co Ltd | RoHS : Compliant | 1,665 | |||
IRFR12N25D![]() | International Rectifier | RoHS : Not Compliant | 1,153 | |||
| CPDQR12V0U | Comchip Technology Corporation Ltd | RoHS : Compliant | 1,150 | |||
IRFR12N25DPBF![]() | International Rectifier | RoHS : Compliant | 951 | |||
| CR1206-4W-4992FT | VENKEL LTD | RoHS : Compliant | 700 | |||
| CSR1206FT50L0 | SEI Stackpole Electronics Inc | RoHS : Compliant | 500 | |||
| CR1206-4700J | Bourns Inc | 82 | ||||
| PWR1219 | Texas Instruments | 30 | ||||
![]() PEI Genesis | SE16FR1210A1.5R12 | SOURIAU-SUNBANK |
| 0 | ||
| SE16FR1212A2.0R12 | SOURIAU-SUNBANK |
| 0 | |||
| SE16FR1206F2.0R12 | SOURIAU-SUNBANK |
| 0 | |||
| SE16FR1220F3.0R12 | SOURIAU-SUNBANK |
| 0 | |||
| SE16FR1220F2.0R12 | SOURIAU-SUNBANK |
| 0 | |||
| SE16FR1206A3.0R12 | SOURIAU-SUNBANK |
| 0 | |||
| SE16FR1204F2.0R12 | SOURIAU-SUNBANK |
| 0 | |||
| SE16FR1208F1.5R12 | SOURIAU-SUNBANK |
| 0 | |||
| SE16FR1216A2.0R12 | SOURIAU-SUNBANK |
| 0 | |||
| SE16FR1212F1.5R12 | SOURIAU-SUNBANK |
| 0 | |||
| SE16FR1220A2.0R12 | SOURIAU-SUNBANK |
| 0 | |||
| SE16FR1220A3.0R12 | SOURIAU-SUNBANK |
| 0 | |||
| SE16FR1210F2.0R12 | SOURIAU-SUNBANK |
| 0 | |||
| SE16FR1208F2.0R12 | SOURIAU-SUNBANK |
| 0 | |||
| SE16FR1204A2.0R12 | SOURIAU-SUNBANK |
| 0 | |||
![]() Powell Electronics | FJH-24-R-12.59-4 | Samtec Inc | .100 Friction Lock Terminal Strip RoHS : Compliant |
| 341 | |
| MS3102R12S-1P | Amphenol Corporation | CONNECTOR |
| 253 | ||
| M83723/95R12126 | Conesys | SELF LOCKING PLUG, SOCKET, 83723 SIII TH |
| 226 | ||
| M83723/74R1212N | Conesys | JAM NUT RECEPT, PIN, 83723 SIII BAYONET |
| 125 | ||
| C3R12124SCNKO | Hammond Manufacturing | 3R SCREW COVER 12X12X4 NO K/O RoHS : Compliant |
| 55 | ||
| M83723/83R12036 | Conesys | WALL MT RECEPT, PIN, 83723 SIII THREADED |
| 41 | ||
| C3R1286SC | Hammond Manufacturing | 3R SCREW COV 12X8X6 |
| 32 | ||
| ALBKM12-FPBR12-P2 | Altech Corporation | Bulkhead Feed-Thru Conn., M12, Front mt. |
| 17 | ||
| HE4WPR/12 | Altech Corporation | Eurostrip,12 pole,10mm spacing |
| 7 | ||
| 910-0R12-10PN01 | TE Connectivity | DEUTSCH CONNECTOR 910-0R12-10PN01 |
| 6 | ||
| M83723/95R12126 | Amphenol Corporation | CONNECTOR |
| 6 | ||
| M83723/82R12127 | Conesys | WALL MT RECEPT, SOCKET, 83723 SIII THREA |
| 5 | ||
| M83723/75R12037 | Amphenol Corporation | CONNECTOR RoHS : Not Compliant |
| 3 | ||
| R-12269-5 | TE Connectivity | SENSOR R-12269-5 |
| 1 | ||
| 100P602-14-1-ZB-R12 | TE Connectivity | Connectors |
| 1 | ||
![]() PUI | CPDQR12V-HF | Comchip Technology Corporation Ltd | RoHS : Compliant | 230,000 | ||
| CPDQR12V | 80,000 | |||||
| CPDUR12V-HF | 80,000 | |||||
| CPDUR12V | Comchip Technology Corporation Ltd | RoHS : Compliant | 40,000 | |||
| TPK-R-12A | 4,644 | |||||
| R1206-005-R | 3,000 | |||||
| FCM-R-12A | 2,000 | |||||
| BLR-1206-G | 861 | |||||
| FPK-R-12A | 631 | |||||
| BLR-1212-G | 305 | |||||
| FMR-1.25A | 295 | |||||
| TPK-R-1.25A-BP | 32 | |||||
| FPK-R-12A-BP | 32 | |||||
| FPK-R-1.25A-BP | 32 | |||||
| CTSR-12 | 24 | |||||
![]() Richardson RFPD | R123179305W | Radiall | QMA M RA CR 1.45/4 |
| 0 | |
| R123464130 | Radiall | RF Coaxial Connector RoHS : Compliant |
| 0 | ||
| R123555300 | Radiall | RF COAX PNL MT CONN |
| 0 | ||
| R123590027W | Radiall | Conn QMA 0Hz to 6GHz 50Ohm Crimp ST Cable Mount RC RoHS : Compliant | 0 | |||
| R123704000W | Radiall | Conn QMA Adapter 0Hz to 6GHz 50Ohm ST M/F Gold Ove RoHS : Compliant |
| 0 | ||
| R123W176000W | Radiall | Conn QMA 0Hz to 6GHz 50Ohm Crimp RA Cable Mount PL RoHS : Compliant | 0 | |||
| R124255003 | Radiall | Conn SMA 0Hz to 18GHz 50Ohm Solder ST Panel Mount RoHS : Compliant |
| 0 | ||
| R124413025 | Radiall | SMA Straight Flange Mount Solder Beryllium Copper RoHS : Compliant |
| 0 | ||
| R124426120 | Radiall | Conn SMA 0Hz to 18GHz 50Ohm Solder ST Thru-Hole RC RoHS : Compliant |
| 0 | ||
| R124464273W | Radiall | Conn SMA 0Hz to 18GHz 50Ohm ST Panel Mount RCP Gol RoHS : Compliant | 0 | |||
| R124681000 | Radiall | Conn SMA 0Hz to 6GHz 50Ohm Solder RA SMD RCP Gold RoHS : Compliant |
| 0 | ||
| R124705003 | Radiall | Conn SMA Adapter 0Hz to 18GHz 50Ohm ST RCP/RCP Gol RoHS : Not Compliant | 0 | |||
| R125076000W | Radiall | Conn SMA 0Hz to 12.4GHz 50Ohm Crimp ST Cable Mount RoHS : Compliant |
| 0 | ||
| R125077000 | Radiall | Conn SMA 0Hz to 12.4GHz 50Ohm Crimp/Solder ST Cabl RoHS : Compliant |
| 0 | ||
| R125414401 | Radiall | RF COAX PNL MT CONN | 0 | |||
![]() Rutronik | SR1206DR-7W1KL![]() | YAGEO Corporation | PS1206 1K 0,5% 0,5W PS/HP RoHS : Compliant |
| 2,665,000 | |
| CFR-12JT-52-220K | YAGEO Corporation | CFR-12 220K 5% 0,17W RoHS : Compliant |
| 100,000 | ||
| CFR-12JT-52-820K | YAGEO Corporation | CFR-12 820K 5% 0,17W RoHS : Compliant |
| 75,000 | ||
| SR1206JR-7T220RL | YAGEO Corporation | PS1206 220R 5% 0,75W PS/HP RoHS : Compliant |
| 40,000 | ||
| CFR-12JT-52-27R | YAGEO Corporation | CFR-12 27R 5% 0,17W RoHS : Compliant |
| 15,000 | ||
| RL1206FR-070R12L | YAGEO Corporation | RL1206 0,12R 1% 0,25W TK600 RoHS : Compliant |
| 15,000 | ||
| CCM03-3505LFT R122 | C&K Switches | Smart Card Reader SMT RA H2,85 RoHS : Compliant |
| 12,000 | ||
| PTSLR12106V260 | Eaton Electronics | Resettable Fuse 2.6A 6V 1210 RoHS : Compliant |
| 9,000 | ||
| PTSLR12106V750 | Eaton Electronics | Resettable Fuse 7.5A 6V 1210 RoHS : Compliant |
| 8,000 | ||
| SIHR120N60E-T1-GE3 | Vishay Intertechnologies | N-CH 600V 32A 104mOhm PPAK 8x8LR RoHS : Compliant |
| 6,000 | ||
| SR1206FR-0733KL | YAGEO Corporation | PS1206 33K 1% 0,25W PULSE/SURGE RoHS : Compliant |
| 5,000 | ||
| SR1206JR-7T1KL | YAGEO Corporation | PS1206 1K 5% 0,75W PS/HP RoHS : Compliant |
| 5,000 | ||
| RR122-1B53-511 | Coto Technology USA | TMR Operate sensitivity of 30 G RoHS : Compliant |
| 3,000 | ||
| R12-150B | RECOM Power GmbH | DC/DC Mod 12V to 159V 5W 3kV 3kV THT RoHS : Compliant |
| 105 | ||
| FP50R12KT4PB11BPSA1 | Infineon Technologies AG | 3PH-PIM 1200V 50A EconoPIM2 TIM RoHS : Compliant |
| 4 | ||
![]() Chip 1 Exchange | CPDQR12V-HF | Comchip Technology Corporation Ltd | INSTOCK RoHS : Compliant | 230,000 | ||
| LQG15HNR12J02D | INSTOCK | 39,317 | ||||
| CR12062005.6KQJPS5 | INSTOCK | 26,000 | ||||
| MUR120RL | Motorola Semiconductor Products | INSTOCK RoHS : Not Compliant | 20,000 | |||
| MUR120RL | SEI Stackpole Electronics Inc | INSTOCK | 10,034 | |||
| MUR120RL | INSTOCK | 5,000 | ||||
| CR1206200100QJP5 | INSTOCK | 4,700 | ||||
| LQW18ANR12J00D / LQW1608AR12J00T1L | INSTOCK | 3,961 | ||||
| SR12.TC | INSTOCK | 2,980 | ||||
| IRCLR1206LF-01-R050-FT | INSTOCK | 2,951 | ||||
| RR1220P-49R9-B-M-T5 | Susumu Co Ltd | INSTOCK | 2,500 | |||
| HR10A-10R-12P | Hirose Electric Co Ltd | INSTOCK RoHS : Not Compliant | 1,947 | |||
| CDR125220MC | SUM | INSTOCK | 500 | |||
| DTR-1250-3.3-SM-AC-H3 | OCP | INSTOCK | 15 | |||
| AD2-54R-12V | INSTOCK | 2 | ||||
![]() Avnet Abacus | ILHB0805ER121V | Vishay Intertechnologies | Ferrite Bead 0805 2012 Metric 120 ohm 5 A ILHB Series 003 ohm 25 - Tape and Reel (Alt: ILHB0805ER121V) RoHS : Compliant | 1,020,000 | ||
| CR1206-FX-1001ELF | Bourns Inc | SMD Chip Resistor 1 kohm 1 250 mW 1206 3216 Metric Thick Film General Purpose - Tape and Reel (Alt: CR1206-FX-1001ELF) RoHS : Compliant | 140,000 | |||
| DR127-101-R | Eaton Corporation | - Tape and Reel (Alt: DR127-101-R) RoHS : Compliant | 61,250 | |||
| ILHB1206ER121V | Vishay Intertechnologies | - Tape and Reel (Alt: ILHB1206ER121V) RoHS : Compliant | 57,000 | |||
| CR1206-FX-1000ELF | Bourns Inc | - Tape and Reel (Alt: CR1206-FX-1000ELF) RoHS : Compliant | 30,000 | |||
| CR1206-FX-1210ELF | Bourns Inc | - Tape and Reel (Alt: CR1206-FX-1210ELF) RoHS : Compliant | 15,000 | |||
| SR1206JR-0722RL | YAGEO Corporation | SMD Chip Resistor 22 Ohm 5 250 mW 1206 3216 Metric Thick Film High Surge SR Series - Tape and Reel (Alt: SR1206JR-0722RL) RoHS : Compliant | 10,000 | |||
| SRR1280-470M | Bourns Inc | - Tape and Reel (Alt: SRR1280-470M) RoHS : Compliant | 6,400 | |||
| SR1206JR-07150RL | YAGEO Corporation | SMD Chip Resistor 150 Ohm 5 250 mW 1206 3216 Metric Thick Film High Surge SR Series (Alt: SR1206JR-07150RL) RoHS : Compliant | 5,000 | |||
| DR125-150-R | Eaton Corporation | Power Inductor SMD 15 H 427 A Shielded 569 A DR Series - Tape and Reel (Alt: DR125-150-R) RoHS : Compliant | 2,400 | |||
| DR125-2R2-R | Eaton Corporation | - Tape and Reel (Alt: DR125-2R2-R) RoHS : Compliant | 2,400 | |||
| DR127-102-R | Eaton Corporation | Power Inductor SMD 1 mH 610 mA Shielded 114 A DR Series - Tape and Reel (Alt: DR127-102-R) RoHS : Compliant | 1,050 | |||
| SRR1260-331K | Bourns Inc | - Tape and Reel (Alt: SRR1260-331K) RoHS : Compliant | 600 | |||
| B84144A36R120 | TDK Corporation | (Alt: B84144A0036R120) RoHS : Compliant | 6 | |||
| B84144A50R120 | TDK Corporation | (Alt: B84144A0050R120) RoHS : Compliant | 2 | |||
![]() Avnet Asia | FP0711V2-R120-R | Eaton Corporation | (Alt: FP0711V2-R120-R) RoHS : Compliant |
| 7,000 | |
| TL1211V1-R120-R | Eaton Corporation | INDUCTOR 120NH (Alt: TL1211V1-R120-R) RoHS : Compliant |
| 7,000 | ||
| WR12X100 JTL | Walsin Technology Corporation | WTCWR12X100 JTL RES D,1206,10.00 OHM,5.0 (Alt: WR12X100 JTL) RoHS : Compliant | 5,000 | |||
| BPMVDE100690R12K0E | Pulse Electronics Corporation | PULBPMVDE100690R12K0E SMD SHIELDED POWER (Alt: BPMVDE100690R12K0E) RoHS : Compliant |
| 3,000 | ||
| FP0808V2-R120-R | Eaton Corporation | FLAT-PAC IND, 120NH, 75A, SMT, 2 PADS (Alt: FP0808V2-R120-R) RoHS : Compliant |
| 3,000 | ||
| DFLR1200-7 | Diodes Incorporated | (Alt: DFLR1200-7) RoHS : Compliant |
| 3,000 | ||
| FP0807R1-R12-R | Eaton Corporation | (Alt: FP0807R1-R12-R) RoHS : Compliant |
| 3,000 | ||
| SL1211V2-R120-R | Eaton Corporation | (Alt: SL1211V2-R120-R) RoHS : Compliant |
| 2,800 | ||
| FP1006V1-R120-R | Eaton Corporation | IND FLAT PAC, 120NH, 58A, 2 PADS, SMT (Alt: FP1006V1-R120-R) RoHS : Compliant |
| 2,400 | ||
| CR-123PEBNDN | Panasonic Electronic Components | (Alt: CR-123PEBNDN) RoHS : Compliant | 2,000 | |||
| FP1012V2-R120-R1 | Eaton Corporation | BUSFP1012V2-R120-R1 IND FLAT PAC, 120NH, (Alt: FP1012V2-R120-R1) RoHS : Compliant |
| 750 | ||
| FP1008V2-R120-NQ | Eaton Corporation | (Alt: FP1008V2-R120-NQ) RoHS : Compliant |
| 600 | ||
| CL1206V1-3-R120-R | Eaton Corporation | BUSCL1206V1-3-R120-R INDUCTOR 120NH (Alt: CL1206V1-3-R120-R) RoHS : Compliant |
| 500 | ||
| TL1212V2-R120-RV | Eaton Corporation | BUSTL1212V2-R120-RV INDUCTOR 120NH (Alt: TL1212V2-R120-RV) RoHS : Compliant |
| 400 | ||
| GH10R12322HR | Amphenol Corporation | MCIO 0.6MM PITCH, R/A PCIE GEN6, 74 PIN (Alt: GH10R12322HR) RoHS : Compliant |
| 250 | ||
![]() Avnet Silica | MUR120RLG![]() | onsemi | Power Rectifier UltraFast Recovery Switchmode 1 A 200 V (Alt: MUR120RLG) RoHS : Compliant | 180,000 | ||
| BT151-800R,127 | WeEn Semiconductor Co Ltd | Thyristor SCR 800V 132A 3Pin3Tab TO220AB Tube (Alt: BT151-800R,127) RoHS : Compliant | 88,000 | |||
M4T28-BR12SH1![]() | STMicroelectronics | Detachable Lithium Power Source 4Pin SNAPHAT Tube (Alt: M4T28-BR12SH1) RoHS : Compliant | 17,802 | |||
M4T32-BR12SH1![]() | STMicroelectronics | Battery Lithium Carbon Monofluoride Coin 28V 120mAh Snap Contact Tube (Alt: M4T32-BR12SH1) RoHS : Compliant | 14,237 | |||
M4T32-BR12SH6![]() | STMicroelectronics | Timekeeper Snaphat 125pF 32768 kHz 120 mAh 3 V (Alt: M4T32-BR12SH6) RoHS : Compliant | 12,006 | |||
| BT152-800R,127 | WeEn Semiconductor Co Ltd | Thyristor SCR 800V 220A 3Pin3Tab TO220AB Tube (Alt: BT152-800R,127) RoHS : Compliant | 6,000 | |||
MUR120-T![]() | Diodes Incorporated | Fast Ultrafast Diode 200 V 1 A Single 875 mV 25 ns 35 A (Alt: MUR120-T) RoHS : Compliant | 5,000 | |||
| BT151X-800R,127 | WeEn Semiconductor Co Ltd | (Alt: BT151X-800R,127) RoHS : Compliant | 5,000 | |||
| BT152X-600R,127 | WeEn Semiconductor Co Ltd | Thyristor SCR 650V 220A 3Pin3Tab TO220F Rail (Alt: BT152X-600R,127) RoHS : Compliant | 4,000 | |||
| BT151-500R,127 | WeEn Semiconductor Co Ltd | Thyristor SCR 500V 132A 3Pin3Tab TO220AB Tube (Alt: BT151-500R,127) RoHS : Compliant | 3,000 | |||
| BT151X-500R,127 | WeEn Semiconductor Co Ltd | Thyristor SCR 500V 132A 3Pin3Tab TO220F Rail (Alt: BT151X-500R,127) RoHS : Compliant | 3,000 | |||
VIPER12AS-E![]() | STMicroelectronics | Primary Switch 8Pin SO N Tube (Alt: VIPER12AS-E) RoHS : Compliant | 2,200 | |||
| BT152-400R,127 | WeEn Semiconductor Co Ltd | Thyristor SCR 450V 220A 3Pin3Tab TO220AB Tube (Alt: BT152-400R,127) RoHS : Compliant | 1,000 | |||
| BT258-600R,127 | WeEn Semiconductor Co Ltd | Thyristor SCR 600V 82A 3Pin3Tab TO220AB Tube (Alt: BT258-600R,127) RoHS : Compliant | 1,000 | |||
| BT150-500R,127 | WeEn Semiconductor Co Ltd | Thyristor SCR 500V 38A 3Pin3Tab TO220AB Tube (Alt: BT150-500R,127) RoHS : Compliant | 1,000 | |||
![]() Braemac Americas-Symmetry | ABLS-LR-12.288MHZ-T![]() | Abracon Corporation | CRYSTAL 12.2880MHZ 18PF SMD RoHS : Compliant |
| 0 | |
| AISC-0603HP-R12J-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-Q1008-R12G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISM-1210-R12M-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AVR-1Z070711SR12KT | Abracon Corporation | RoHS : Compliant |
| 0 | ||
AM1DR-1207S-RZ![]() | Aimtec | RoHS : Compliant |
| 0 | ||
| AM1DR-1209SEZ | Aimtec | RoHS : Compliant |
| 0 | ||
| AVR-1F100705SR12KT | Abracon Corporation | RoHS : Compliant |
| 0 | ||
AM1DR-1212SZ![]() | Aimtec | RoHS : Compliant |
| 0 | ||
AM1MR-1215SZ![]() | Aimtec | RoHS : Compliant |
| 0 | ||
| AISM-1008-R12J-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AVR-1F090706SR12LT | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AVR-1Z100506SR12LT | Abracon Corporation | RoHS : Compliant |
| 0 | ||
ASPI-U252010-R12M-T![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
AMDLA4020Q-R12MT![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
![]() Chip-Germany GmbH | SMD KON 10UF 50V 20% X5R 1210 | Kyocera AVX Components | 610 | |||
| SPD125R-124M | API Delevan | RoHS : Compliant | 11 | |||
IRFR120PBF![]() | Vishay Intertechnologies | RoHS : Compliant | 3 | |||
| PSAA20R-120 | Phihong USA | 1 | ||||
![]() Component Electronics, Inc | CR1206-4W-821JT | VENKEL LTD | IN STOCK SHIP TODAY RoHS : Compliant | 25,000 | ||
| CR1206F1332T1LF | Chip Technologies Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 19,500 | ||
GRM36X7R122K050AQ![]() | Murata Manufacturing Co Ltd | IN STOCK SHIP TODAY RoHS : Compliant |
| 10,000 | ||
| FTR-122-57-T-D-P | Samtec Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 5,149 | ||
| RSF2WSJR-120R | BREL International Components | IN STOCK SHIP TODAY | 4,000 | |||
| LL1608-FSR12J | TOKO Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 4,000 | ||
| CR1206-8W-2872FT | VENKEL LTD | IN STOCK SHIP TODAY RoHS : Compliant |
| 3,580 | ||
| RR1220P-2432-B-M | Susumu Co Ltd | IN STOCK SHIP TODAY |
| 1,000 | ||
| RR1220P-6041-B-M | Susumu Co Ltd | IN STOCK SHIP TODAY |
| 1,000 | ||
| CR1206-8W-104JT | VENKEL LTD | IN STOCK SHIP TODAY RoHS : Compliant |
| 300 | ||
| RR1220P-105-B-T5 | Susumu Co Ltd | IN STOCK SHIP TODAY RoHS : Compliant |
| 185 | ||
| NRC225M35R12 | NEC Electronics Group | IN STOCK SHIP TODAY RoHS : Unknown | 145 | |||
| NRD226M20R12 | NEC Electronics Group | IN STOCK SHIP TODAY RoHS : Unknown |
| 50 | ||
| LM385BPWR-1-2 | National Semiconductor Corporation | IN STOCK SHIP TODAY |
| 34 | ||
| HR10A-10R-12P | Hirose Electric Co Ltd | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 4 | ||
![]() DB Roberts | 010632R125B | Essentra Components | 632 X 1-14 ROUND HD SLOTTED BL | 0 | ||
| 011024R125 | Essentra Components | ROUND SLOTTED SCREW, 10-24 THR | 0 | |||
| 012520R125B | Essentra Components | 14-20 X1-14 ROUND HD SLOTTED B | 0 | |||
R1209-062![]() | Essentra Components | CB Insertor/ExtractorNatural | 0 | |||
| R4-EM-R12-162 | Southco | 0 | ||||
| R1/2D | Essentra Components | NPT THREADED PLUG -SQ HEADGFN | 0 | |||
| R4-EM-R12-161 | Southco | R4-EM-R12-161 | 0 | |||
| PGR1/2A | Essentra Components | RAISED FLANGE DISC ADHESIVEHDP | 0 | |||
| AECH3124R125 | PennEngineering (PEM) | 5/16 | 0 | |||
| AESS8R120 | PennEngineering (PEM) | #8 | 0 | |||
| AEA31R125 | PennEngineering (PEM) | 5/16 | 0 | |||
| PGR12A | Essentra Components | RAISED FLANGE DISC ADHESIVEHDP | 0 | |||
| ASPR-12-062 | Essentra Components | BUMPER,ADH MNT,RND,BLACK,.75 I | 0 | |||
| 011024R125B | Essentra Components | 1024 X 1-14 ROUND HD SLOTTED B | 0 | |||
| 27AMR1252187 | Essentra Components | 0 | ||||
![]() EBV Elektronik | HIR12-21C/TR8 | Everlight Electronics Co Ltd | LED IrLED 850nm 2Pin SMD TR (Alt: S20B000016) RoHS : Compliant | 12,000 | ||
| FF11MR12W2M1HPB11BPSA1 | Infineon Technologies AG | MOSFET Transistor Half Bridge N Channel 75 A 12 kV 00108 ohm 18 V 515 V (Alt: SP005568397) RoHS : Compliant | 5,364 | |||
| BT152-600R,127 | WeEn Semiconductor Co Ltd | Thyristor SCR 650V 220A 3Pin3Tab TO220AB Tube (Alt: BT152-600R,127) RoHS : Compliant | 4,000 | |||
| BT151-650R,127 | WeEn Semiconductor Co Ltd | (Alt: BT151-650R,127) RoHS : Compliant | 3,000 | |||
VIPER12AS-E![]() | STMicroelectronics | Primary Switch 8Pin SO N Tube (Alt: VIPER12AS-E) RoHS : Compliant | 2,300 | |||
| BT152-400R,127 | WeEn Semiconductor Co Ltd | Thyristor SCR 450V 220A 3Pin3Tab TO220AB Tube (Alt: BT152-400R,127) RoHS : Compliant | 1,000 | |||
| AIMBG120R120M1XTMA1 | Infineon Technologies AG | (Alt: SP005411517) RoHS : Compliant | 1,000 | |||
IPW60R125C6FKSA1![]() | Infineon Technologies AG | Power MOSFET N Channel 650 V 30 A 125 Milliohms TO247 3 Pins Through Hole (Alt: SP000641912) RoHS : Compliant | 960 | |||
| FP10R12W1T4B11BOMA1 | Infineon Technologies AG | IGBT Module PIM Three Phase Input Rectifier 10 A 185 V 105 W 175 C Module (Alt: SP000707708) RoHS : Compliant | 240 | |||
| FS35R12KT3BPSA1 | Infineon Technologies AG | (Alt: SP005422410) RoHS : Compliant | 210 | |||
| DF11MR12W1M1HFB67BPSA1 | Infineon Technologies AG | (Alt: SP005596138) RoHS : Compliant | 72 | |||
| FF450R12ME4PB11BOSA1 | Infineon Technologies AG | Trans IGBT Module NCH 1200V 450A 11Pin EconoDUAL (Alt: SP001102676) RoHS : Compliant | 42 | |||
| FF17MR12W1M1HB70BPSA1 | Infineon Technologies AG | Silicon Carbide MOSFET Half Bridge Dual N Channel 50 A 12 kV 00162 ohm Module (Alt: SP005634488) RoHS : Compliant | 24 | |||
| FF800R12KE7HPSA1 | Infineon Technologies AG | IGBT Module Dual Half Bridge 800 A 15 V 175 C (Alt: SP005432766) RoHS : Compliant | 10 | |||
| FF600R12IP4BOSA1 | Infineon Technologies AG | IGBT Module Dual Half Bridge 600 A 17 V 335 kW 150 C Module (Alt: SP000609754) RoHS : Compliant | 9 | |||
![]() ECCO | CA3102R12S-3P | ITT Interconnect Solutions | RoHS : Not Compliant | 476 | ||
| MS3102R12S-3PY | ITT Interconnect Solutions | RoHS : Not Compliant | 476 | |||
| CA3102R12S-4P | ITT Interconnect Solutions | 381 | ||||
| MS3102R12S-3SF80 | ITT Interconnect Solutions | 306 | ||||
| CA3108R12S-3P | ITT Interconnect Solutions | RoHS : Not Compliant | 107 | |||
| CA3108R12S-4P | ITT Interconnect Solutions | 107 | ||||
| AE83375R1212N | Aero-Electric Connector Inc | RoHS : Compliant | 64 | |||
| M83723/76R1203N | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 32 | ||
| M83723/87R1212N | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 14 | ||
| AE83373R1212N | Aero-Electric Connector Inc | RoHS : Compliant | 5 | |||
| AE83383R1203N | Aero-Electric Connector Inc | 1 | ||||
| M83723/84R1212N | Aero-Electric Connector Inc | RoHS : Not Compliant | 1 | |||
| AE83372R1203N | Aero-Electric Connector Inc | 1 | ||||
| AE83383R1203N-LC | Aero-Electric Connector Inc | 1 | ||||
| M83723/85R1203N | Aero-Electric Connector Inc | RoHS : Not Compliant | 1 | |||
![]() FDH Electronics | RDC8R-12AA | Connector Technology Inc | Other Products | 143 | ||
| M83723/95R12126 | Corsair Electrical Connectors Inc | Circular Conn |
| 140 | ||
| MS24265R12B3S6 | Aero-Electric Connector Inc | Connector MIL M |
| 66 | ||
| MS24266R12B3SN-LC | Aero-Electric Connector Inc | Connector MIL M |
| 66 | ||
| M83723/75R1212N | Amphenol Aerospace | Circular Conn |
| 55 | ||
| CNR122 | Amphenol Cable & Interconnect Technologies | RF / Coaxial |
| 49 | ||
| MS24264R12T3P6-LC | Cinch Connectivity Solutions | Circular Conn RoHS : Not Compliant |
| 38 | ||
| M83723/74R12126 | Aero-Electric Connector Inc | Circular Conn RoHS : Not Compliant |
| 6 | ||
| HS5842WR1202L | Glenair Inc | Backshells & Ac | 5 | |||
| MS25281-R12 | Esterline NMC | Hardware | 5 | |||
| MS24265R12B3PN | Aero-Electric Connector Inc | Circular Conn |
| 1 | ||
| R120 5/8 BLACK SPL | SUMITOMO ELECTRIC Industries Ltd | Harness Mgmt | 0 | |||
| MWDM4L-100SCBR-.125 | Glenair Inc | Connector RoHS : Not Compliant | 0 | |||
| MWDM1L-21SCBR-.125 | Glenair Inc | Connector RoHS : Not Compliant | 0 | |||
| MWDM1L-21PCBR-.125 | Glenair Inc | Connector RoHS : Not Compliant | 0 | |||
![]() Flip Electronics | MXL7630S-AQF-R-12 | MaxLinear Inc | Stock, Ship Today |
| 27,497 | |
| S29GL512P10FFIR12 | Cypress Semiconductor | Stock RoHS : Compliant | 6,961 | |||
| IRLR120TRPBF | Vishay Intertechnologies | Stock RoHS : Compliant | 4,000 | |||
| MBR120VLSFT1G | onsemi | Stock, Ship Today RoHS : Compliant | 3,000 | |||
| S70GL02GP11FAIR12 | Cypress Semiconductor | Stock RoHS : Not Compliant | 2,388 | |||
| BCR12FM-12LBA8#BH0 | Renesas Electronics Corporation | Stock | 1,195 | |||
| BCR12FM-12LB-1#BG0 | Renesas Electronics Corporation | Stock | 916 | |||
| BCR25FR-12LB#BH0 | Renesas Electronics Corporation | Stock RoHS : Compliant | 724 | |||
| 5962R1222201VXC | Renesas Electronics Corporation | Stock RoHS : Compliant | 637 | |||
| CR12CS-16B-A1#BH0 | Renesas Electronics Corporation | Stock RoHS : Compliant | 374 | |||
| SSDSC2KR120H6XN | Altera Corporation | Stock | 60 | |||
| BCR12CS-12LB#BH0 | Renesas Electronics Corporation | Stock RoHS : Compliant | 35 | |||
| COHR1257401J | Flip Electronics Manufacturing Services | Stock, Ship Today | 17 | |||
| FF600R12IE4VBOSA1 | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 3 | ||
| FD1400R12IP4DBOSA1 | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 2 | ||
![]() Maritex | PHDR-12VS | JST Manufacturing | Rectangular Connector Housings; PHDR-12VS; JST; 2; 12; 12 RoHS : Compliant |
| 59,719 | |
| ELR-12V | JST Manufacturing | Blade Connector Housings; ELR-12V; JST RoHS : Compliant |
| 5,489 | ||
| 0402CP-R12G (120NH) 4K/REEL ROHS | Prosperity Dielectrics Co Ltd | Chip inductor; SMD; 0402; 120nH; 50mA; 2% |
| 3,960 | ||
| SR125C103KARTR2 | Kyocera AVX Components | Ceramic Capacitor; THT; 10nF; 50V; 10%; X7R RoHS : Compliant |
| 2,280 | ||
| HJR1-2C-L-5VDC | Ningbo Tianbo Ganglian Electronics Co Ltd | Electromagnetic relay; contact rating current 2A; coil voltage 5VDC; changeover contact (2C); moc cewki: 200mW; 2A/24VDC; 1A/120VAC |
| 885 | ||
| NDR-120-48 | Mean Well | Power Supply; DIN; 120W; 48V; 2.5A; 90-264VAC; 127-370VDC RoHS : Compliant |
| 872 | ||
| XDR-120E-24 | Mean Well | Power Supply; DIN; 120W; 24V; 5A; 85-264VAC; 120-370VDC |
| 425 | ||
| EDR-120-12 | Mean Well | Power Supply; DIN; 120W; 12V; 10A; 90-264VAC; 127-370VDC RoHS : Compliant |
| 44 | ||
| FS25R12W1T4_B11 | Infineon Technologies AG | IGBT Modules; FS25R12W1T4_B11; INFINEON TECHNOLOGIES; 24; 1.2 kV; 2.25 V; Not Halogen Free RoHS : Compliant |
| 36 | ||
| FF100R12RT4 | Infineon Technologies AG | IGBT Modules; FF100R12RT4; INFINEON TECHNOLOGIES; 1.2 kV; 555 W; 1.75 V; 10 RoHS : Compliant |
| 25 | ||
| FF75R12RT4 | Infineon Technologies AG | IGBT Modules; FF75R12RT4; INFINEON TECHNOLOGIES; 10; 1.2 kV; 2.15 V; Not Halogen Free RoHS : Compliant |
| 4 | ||
| TSR 1-2450 | Traco Power | Converter DC/DC; Vout: 5V; Vin: 6.5-36V; 1A; -40+85 deg.C; THT; TO220 |
| 3 | ||
| CR-12JL4---51K | Viking Technology | Chip Resistor; SMD; 2512; 51KOhm; 5%; 1W |
| 2 | ||
| GQ25-L-11ZE/R/12V/S | Onpow | Push button switch; bistable; 25mm; screws terminals; stainless steel; ring red illumantion; IP67. |
| 1 | ||
| LAS1GQ-11ZD/R/12V/S | Onpow | Push button switch; bistable; 19mm; solder terminals; stainless steel; dot red illumination; IP67. |
| 1 | ||
![]() Master Electronics | PR12-5V-360-1C![]() | Same Sky | 19 x 15.5 x 15.8 mm 5 V 6 A SPDT (1 Form C) Power Relay RoHS : Compliant |
| 425 | |
| RER1.25-S6-X | Panduit Corp | Harness Board Cable Bundle Elastic Retainer - Replaceable Elastic Band - Nylon 6.6 - 1.25 Bundle Dia. RoHS : Not Compliant |
| 200 | ||
| R12P212D | RECOM Power GmbH | RoHS : Compliant |
| 190 | ||
| Q8F5BXXR12E | APEM Inc | Panel Mount LED Indicator - 8mm - Red - 12VDC @ 20mA - Flush - Black Bezel - Wires - IP67 RoHS : Compliant |
| 36 | ||
| R12 | Platt Luggage | Multi-Carts Versatile Affordable And Efficient RoHS : Compliant |
| 3 | ||
| R12-120-48-Z4-E1 | TE Connectivity | RoHS : Compliant |
| 1 | ||
| QS83XXHR12 | APEM Inc | LED INDICATOR QS8 SNAP IN RoHS : Compliant |
| 0 | ||
| R-12269-2 | TE Connectivity | RTD SM KA P100 385 .5% .06 MOQ Reduction RoHS : Compliant |
| 0 | ||
| R-12339-4 | TE Connectivity | RoHS : Compliant |
| 0 | ||
| PEC11R-1225F-S0012 | Bourns Inc | Encoder /Tray Packaging |Bourns PEC11R-1225F-S0012 RoHS : Compliant |
| 0 | ||
| Q14F5ARXXHR12E | APEM Inc | LED INDICATOR 14MM RoHS : Compliant |
| 0 | ||
| Q16F1BXXR12AE | APEM Inc | 16mm dia panel mount indicator - Uni Color LED - Flush Mount - Red - 12VDC/12VAC - Solder Lug/Faston Terminals - Plated Brass - Black - IP67 RoHS : Compliant |
| 0 | ||
| Q6R1CXXR12 | APEM Inc | Panel Mount LED Indicator - 6mm - Red - 12VDC - Recessed - Chrome Bezel - Solder Lugs RoHS : Compliant |
| 0 | ||
| Q8P1GXXR12 | APEM Inc | Panel Mount LED Indicator - 8mm - Red - 12VDC @ 20mA - Prominent - Satin Grey Bezel - Solder Lugs/Fastons RoHS : Compliant |
| 0 | ||
| 1SNA235709R1200 | TE Connectivity | ABB-CONNECTION - CONNECTION MARKING EQUIPMENT & RoHS : Compliant |
| 0 | ||
![]() Neutron USA | F412R-12MB | Nidec Corporation | DC Fan, 41X41X12.2mm, 12V DC, .15m3/min flow, 26 Pa, 23db, 1 ball & 1 sleve barn |
| 50 | |
| QS83XXHR12 | APEM Inc | LED Panel Mount Indicators LED INDICATOR QS8 SNAP IN |
| 35 | ||
| EL240A20R-12 | Crydom Inc | Solid State Relays - Industrial Mount PM IP00 SSR 280VAC 20A10-14VDCRN RoHS : Compliant |
| 23 | ||
| Q6P1CXXSR12 | APEM Inc | LED Panel Mount Indicators LED Indicators, 6mm 12VDC, Super Red RoHS : Compliant |
| 7 | ||
| IOLOGIK R1214 | Moxa Inc | RS-485 remote I/O, 6 DIs, 6 Relays, -10 to 75°C operating temperature. |
| 5 | ||
| Q8R3CXXR12E | APEM Inc | LED Panel Mount Indicators LED INDICATOR 8MM RoHS : Compliant |
| 2 | ||
| HW1P-1FQD-R-12V | IDEC Corporation | Panel Mount Indicator, Red LED, 12 V, Screw Terminal, 22 mm, HW Series RoHS : Compliant |
| 1 | ||
| HW4L-M1F11QD-R-12V | IDEC Corporation | 22mm Pushbutton Illuminated Red Button Face RoHS : Compliant |
| 0 | ||
| GSR-120 | Carlo Gavazzi Holding AG | Shunt Release, Right Side Mount, 110 to 127/120 V, 50/60 Hz, GSR Series |
| 0 | ||
| Q12P1BXXR12E | APEM Inc | LED Panel Mount Indicators INDICATOR 12V 12MM PROMINENT RED RoHS : Compliant |
| 0 | ||
| PBM2-M-R12-P-F-BA-67 | Same Sky | Pushbutton Switches - Board Mount Push Button, SPST-NO, Off-(On), 5-12V, Anti Vandal, 16mm, Flat, Black Alloy, Red Illuminated, Panel Mount, IP67 |
| 0 | ||
| PSA15R-120P | Phihong USA | Wall Mount AC Adapters 15W 12V 1.25A Level VI |
| 0 | ||
| PSA15R-120P6 | Phihong USA | Wall Mount AC Adapters 15W 12V 1.25A Level VI |
| 0 | ||
| PSAC12R-120-R-CR1 | Phihong USA | Wall Mount AC Adapters 12W 12V 1A 2.1x5.5 RA CONNECTOR |
| 0 | ||
| RER120-26/14/2TDP | ebm-papst | Blowers 120x54 24V 221.9CFM 78W 6100RPM 8.2dB BB |
| 0 | ||
![]() Pasternack Enterprises US | PE3C8813/OR-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-OR, RF Cable Type: Belden 1694A-OR, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 12 Inch Length Using 75 Ohm 1694A-OR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 12 inch length using 75 Ohm 1694A-OR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 12 inch length using 75 Ohm 1694A-OR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8813/OR-12, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8813/OR-12 is built with Belden 1694A-OR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 12 inch length using 75 Ohm 1694A-OR coax. |
| 983 | |
| PE3C8813/BR-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-BR, RF Cable Type: Belden 1694A-BR, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1694A-BR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 120 inch length using 75 Ohm 1694A-BR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 120 inch length using 75 Ohm 1694A-BR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8813/BR-120, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8813/BR-120 is built with Belden 1694A-BR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 120 inch length using 75 Ohm 1694A-BR coax. |
| 162 | ||
| PE3C8818/BR-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-BR, RF Cable Type: Belden 1694A-BR, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1694A-BR Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-BR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-BR coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/BR-120, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/BR-120 is built with Belden 1694A-BR which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-BR coax. |
| 105 | ||
| PE3C8748/GR-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4855R-GR, RF Cable Type: Belden 4855R-GR, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 12 Inch Length Using 75 Ohm 4855R-GR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 12 inch length using 75 Ohm 4855R-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 12 inch length using 75 Ohm 4855R-GR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8748/GR-12, can also be known as a 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8748/GR-12 is built with belden 4855R-GR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8748/GR-12 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 12 inch length using 75 Ohm 4855R-GR coax. |
| 89 | ||
| PE3C8749/GR-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4855R-GR, RF Cable Type: Belden 4855R-GR, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 12G SDI Cable 120 Inch Length Using 75 Ohm 4855R-GR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 12G SDI cable 120 inch length using 75 Ohm 4855R-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 12G SDI cable 120 inch length using 75 Ohm 4855R-GR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 12G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8749/GR-120, can also be known as a 12G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8749/GR-120 is built with belden 4855R-GR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. 12G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 12G SDI cable 120 inch length using 75 Ohm 4855R-GR coax. |
| 51 | ||
| PE3C8749/GR-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4855R-GR, RF Cable Type: Belden 4855R-GR, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 12G SDI Cable 12 Inch Length Using 75 Ohm 4855R-GR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 12G SDI cable 12 inch length using 75 Ohm 4855R-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 12G SDI cable 12 inch length using 75 Ohm 4855R-GR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 12G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8749/GR-12, can also be known as a 12G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8749/GR-12 is built with belden 4855R-GR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. 12G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 12G SDI cable 12 inch length using 75 Ohm 4855R-GR coax. |
| 51 | ||
| PE3C8873/OR-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-OR, RF Cable Type: Belden 1855A-OR, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 12 Inch Length Using 75 Ohm 1855A-OR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 12 inch length using 75 Ohm 1855A-OR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 12 inch length using 75 Ohm 1855A-OR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8873/OR-12, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8873/OR-12 is built with Belden 1855A-OR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 12 inch length using 75 Ohm 1855A-OR coax. |
| 44 | ||
| PE3C8747/OR-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4855R-OR, RF Cable Type: Belden 4855R-OR, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 12G SDI Cable 12 Inch Length Using 75 Ohm 4855R-OR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 12 inch length using 75 Ohm 4855R-OR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 12 inch length using 75 Ohm 4855R-OR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 12G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8747/OR-12, can also be known as a 12G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8747/OR-12 is built with belden 4855R-OR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. 12G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 12 inch length using 75 Ohm 4855R-OR coax. |
| 44 | ||
| PE3C8873/GR-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GR, RF Cable Type: Belden 1855A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 12 Inch Length Using 75 Ohm 1855A-GR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 12 inch length using 75 Ohm 1855A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 12 inch length using 75 Ohm 1855A-GR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8873/GR-12, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8873/GR-12 is built with Belden 1855A-GR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 12 inch length using 75 Ohm 1855A-GR coax. |
| 44 | ||
| PE3C8747/GR-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4855R-GR, RF Cable Type: Belden 4855R-GR, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 12G SDI Cable 12 Inch Length Using 75 Ohm 4855R-GR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 12 inch length using 75 Ohm 4855R-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 12 inch length using 75 Ohm 4855R-GR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 12G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8747/GR-12, can also be known as a 12G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8747/GR-12 is built with belden 4855R-GR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. 12G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 12 inch length using 75 Ohm 4855R-GR coax. |
| 44 | ||
| PE3C8743/OR-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-OR, RF Cable Type: Belden 4694R-OR, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm BNC Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 120 Inch Length Using 75 Ohm 4694R-OR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4694R-OR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4694R-OR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8743/OR-120, can also be known as a 12G SDI BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to 1.0/2.3 plug cable assembly PE3C8743/OR-120 is built with belden 4694R-OR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8743/OR-120 can also be used in the other direction and will be 1.0/2.3 male to BNC male cable assembly if the opposite connectivity is required. 12G SDI BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4694R-OR coax. |
| 29 | ||
| PE3C8814/OR-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-OR, RF Cable Type: Belden 1694A-OR, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1694A-OR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 120 inch length using 75 Ohm 1694A-OR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 120 inch length using 75 Ohm 1694A-OR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to HD-BNC cable is a male to male coax assembly, PE3C8814/OR-120, can also be known as a 6G SDI BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to HD-BNC plug cable assembly PE3C8814/OR-120 is built with Belden 1694A-OR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8814/OR-120 can also be used in the other direction and will be HD-BNC male to BNC male cable assembly if the opposite connectivity is required. 6G SDI BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 120 inch length using 75 Ohm 1694A-OR coax. |
| 0 | ||
| PE3C0847/HSGR-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to TNC Male Low Loss Cable 12 Inch Length Using PE-P142LL Coax., Radio frequency assembly SMA male to TNC male low loss cable 12 inch length using PE-P142LL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC male low loss cable 12 inch length using PE-P142LL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and TNC cable connection on the other. Our low loss SMA to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C0847/HSGR-12 can also be known as a low loss SMA plug to TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to TNC plug cable assembly PE3C0847/HSGR-12 is built with PE-P142LL which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency SMA male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0847/HSGR-12 can also be used in the other direction and will be TNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to TNC male low loss cable 12 inch length using PE-P142LL coax. |
| 0 | ||
| PE3C8745/GR-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-GR, RF Cable Type: Belden 4694R-GR, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 12 Inch Length Using 75 Ohm 4694R-GR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 12 inch length using 75 Ohm 4694R-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 12 inch length using 75 Ohm 4694R-GR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8745/GR-12, can also be known as a 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8745/GR-12 is built with belden 4694R-GR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8745/GR-12 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 12 inch length using 75 Ohm 4694R-GR coax. |
| 0 | ||
| PE6TR1201 | Pasternack Enterprises | Key Specifications, Termination Type: RF Load, Impedance: 50 Ohm, Maximum Frequency: 18 GHz, Maximum VSWR: 1.15:1, Minimum Frequency: DC, Maximum Power: 1 Watt, Power, Peak: 500 Watts, Connector Series: SMA, Connector Gender: Male, Temperature, Max Operating: 125 deg C, Temperature, Min Operating: -269.15 deg C. 1 Watt RF Termination for Cryogenic Application, DC to 18 GHz With SMA Male Input Stainless Steel Body. Pasternack’s PE6TR1201 RF load termination (also known as a dummy load) is designed for cryogenic applications and has an SMA male connector. This Pasternack SMA male load/termination is rated for a maximum frequency of 18 GHz. Our SMA male termination load is an RF load termination with a 50 Ohm impedance. The maximum input power rating (CW) of this RF termination is 1 Watt. Make your online purchase right now to take advantage of our same-business-day shipping. This SMA terminator comes with a chain and is manufactured with a passivated stainless steel housing body. Pasternack's 50 Ohm SMA coaxial termination has a maximum input power (CW) of 1 Watt and a maximum VSWR of 1.15:1. This termination is commonly used to terminate devices such as couplers, circulators, hybrids, and combiners. Additional dimensions and specifications for this RF load termination are on our downloadable PDF datasheet above. Pasternack's PE6TR1201 terminator is designed to withstand temperatures ranging from 4 kelvin to +125 deg C. Our termination can work and maintain excellent RF performance at the low temperature of 4 kelvin. Our RF load/termination is an indispensable component in many RF, microwave and millimeter wave systems where signal reflection from unused ports can potentially damage the device or reduce signal integrity. This 1 Watt RF termination has a heatsink body that is designed to provide adequate heat dissipation within its full frequency of operation. Our radio frequency termination is suitable for quantum computing, precision measurements, instrumentation and prototyping and characterization applications. Pasternack is where to buy a high-quality 18 GHz RF load/termination for quick shipment worldwide because this is only one of more than a million RF parts/components we have available. This 1 Watt SMA male load termination is part of over one million RF, microwave and millimeter wave components in stock at Pasternack. Our RF load termination will ship worldwide the same business day as purchased. |
| 0 | ||
![]() TE Connectivity | RLP73K3AR12FTDF![]() | TE Connectivity | RLP73K 3A R12 1% 1K RL Resistance Value: .12 Ω Element Type: Thick Film Resistor Type: Current Sensing Resistor Passive Component Tolerance: 1 % Package Size Code: 2512 0.12 Ω Thick Film Current Sensing Resistor 1 % | Thick Film Resistor: Current Sense | Part Number: RLP73K3AR12FTDF | Internal Number: 2-2176057-7 | TE Connectivity RoHS : Compliant |
| 81,757 | |
| RL73N1JR12FTDF | TE Connectivity | RL73N 1J R12 1% 1K RL Resistance Value: 12 Ω Element Type: Thick Film Resistor Type: Current Sensing Resistor Passive Component Tolerance: 1 % Package Size Code: 0603 Thick Film Resistor: Current Sense | 12 Ω Thick Film Current Sensing Resistor 1 % | Part Number: RL73N1JR12FTDF | Internal Number: 2-1879460-7 | TE Connectivity RoHS : Compliant |
| 8,500 | ||
RLP73K2BR12JTD![]() | TE Connectivity | RLP73K 2B R12 5% 5K RL Resistance Value: .12 Ω Element Type: Thick Film Resistor Type: Current Sensing Resistor Passive Component Tolerance: 5 % Package Size Code: 1206 0.12 Ω Thick Film Current Sensing Resistor 5 % | Thick Film Resistor: Current Sense | Part Number: RLP73K2BR12JTD | Internal Number: 2-2176056-7 | TE Connectivity RoHS : Compliant |
| 6,336 | ||
| RL73K3AR12JTE | TE Connectivity | RL73K 3A R12 5% 4K RL Resistance Value: .12 Ω Element Type: Thick Film Resistor Type: Current Sensing Resistor Passive Component Tolerance: 5 % Package Size Code: 2512 0.12 Ω Thick Film Current Sensing Resistor 5 % | Thick Film Resistor: Current Sense | Part Number: RL73K3AR12JTE | Internal Number: 4-1622825-2 | TE Connectivity RoHS : Compliant |
| 4,630 | ||
| RL73H3AR12FTDF | TE Connectivity | RL73H 3A R12 1% 1K RL Resistance Value: .12 Ω Element Type: Thick Film Resistor Type: Current Sensing Resistor Passive Component Tolerance: 1 % Package Size Code: 2512 0.12 Ω Thick Film Current Sensing Resistor 1 % | Thick Film Resistor: Current Sense | Part Number: RL73H3AR12FTDF | Internal Number: 4-1622824-9 | TE Connectivity RoHS : Compliant |
| 4,000 | ||
| RL73H2BR12FTDF | TE Connectivity | RL73H 2B R12 1% 1K RL Resistance Value: 12 Ω Element Type: Thick Film Resistor Type: Current Sensing Resistor Passive Component Tolerance: 1 % Package Size Code: 1206 Thick Film Resistor: Current Sense | 12 Ω Thick Film Current Sensing Resistor 1 % | Part Number: RL73H2BR12FTDF | Internal Number: 2-1879462-2 | TE Connectivity RoHS : Compliant |
| 2,789 | ||
| RL73K2AR12JTD | TE Connectivity | RL73K 2A R12 5% 5K RL Resistance Value: .12 Ω Element Type: Thick Film Resistor Type: Current Sensing Resistor Passive Component Tolerance: 5 % Package Size Code: 0805 0.12 Ω Thick Film Current Sensing Resistor 5 % | Thick Film Resistor: Current Sense | Part Number: RL73K2AR12JTD | Internal Number: 5-1622825-4 | TE Connectivity RoHS : Compliant |
| 2,300 | ||
| RL73K3AR12JTDF | TE Connectivity | RL73K 3A R12 5% 1K Reel Resistance Value: .12 Ω Element Type: Thick Film Resistor Type: Current Sensing Resistor Passive Component Tolerance: 5 % Package Size Code: 2512 0.12 Ω Thick Film Current Sensing Resistor 5 % | Thick Film Resistor: Current Sense | Part Number: RL73K3AR12JTDF | Internal Number: 1-1622825-0 | Alias Number: RL73K3AR12J | TE Connectivity RoHS : Compliant |
| 2,137 | ||
| 3627575047CR12M | TE Connectivity | 3627C 575047 R12 20% Inductance: .12 µH Current Rating (Max): 6000 mA DC Resistance: .0098 Ω Passive Component Tolerance: 20 % Shielded: No 0.12 µH 6000 mA .0098 Ω 20 % | Power Inductor | Part Number: 3627575047CR12M | Internal Number: 2176641-1 | TE Connectivity RoHS : Compliant |
| 1,000 | ||
RLP73N1ER12FTDF![]() | TE Connectivity | RLP73N 1E R12 1% 1K RL Resistance Value: .12 Ω Element Type: Thick Film Resistor Type: Low Ohmic Resistor Passive Component Tolerance: 1 % Package Size Code: 0402 0.12 Ω Thick Film Low Ohmic Resistor 1 % | Thick Film Resistor: Current Sense | Part Number: RLP73N1ER12FTDF | Internal Number: 1-2176049-0 | TE Connectivity RoHS : Compliant |
| 890 | ||
| SMW3R12JT | TE Connectivity | SMW3 R12 5% Resistance Value: .12 Ω Element Type: Wire Wound Resistor Type: Power Resistor Passive Component Tolerance: 5 % Power Rating: 3 W 0.12 Ω Wire Wound Power Resistor 5 % | Smd Power Resistor: 7 Watt & 0.10-500 Ohm | Part Number: SMW3R12JT | Internal Number: 1879021-3 | TE Connectivity RoHS : Compliant |
| 764 | ||
| 36502AR12JTDG | TE Connectivity | 3650 0805 0.12uH 5% 2K RL Inductance: .12 µH Inductor Type: High Frequency Current Rating (Max): 400 mA DC Resistance: .51 Ω Package Size Code: 0805 0.12 µH High Frequency 400 mA .51 Ω | High Frequency & Rf Inductor | Part Number: 36502AR12JTDG | Internal Number: 4-1624113-8 | TE Connectivity RoHS : Compliant |
| 635 | ||
RLP73N2AR12FTDF![]() | TE Connectivity | RLP73N 2A R12 1% 1K RL Resistance Value: .12 Ω Element Type: Thick Film Resistor Type: Low Ohmic Resistor Passive Component Tolerance: 1 % Package Size Code: 0805 0.12 Ω Thick Film Low Ohmic Resistor 1 % | Thick Film Resistor: Current Sense | Part Number: RLP73N2AR12FTDF | Internal Number: 1-2176053-0 | TE Connectivity RoHS : Compliant |
| 597 | ||
| 36501JR12JTDG | TE Connectivity | 3650 0603 0.12uH 5% 2K RL Inductance: .12 µH Inductor Type: High Frequency Current Rating (Max): 300 mA DC Resistance: .65 Ω Package Size Code: 0603 0.12 µH High Frequency 300 mA .65 Ω | High Frequency & Rf Inductor | Part Number: 36501JR12JTDG | Internal Number: 1-1624112-1 | Alias Number: 36501JR12J | TE Connectivity RoHS : Compliant |
| 254 | ||
| RL73H2ER12FTDF | TE Connectivity | RL73H 2E R12 1% 1K RL Resistance Value: 12 Ω Element Type: Thick Film Resistor Type: Current Sensing Resistor Passive Component Tolerance: 1 % Package Size Code: 1210 Thick Film Resistor: Current Sense | 12 Ω Thick Film Current Sensing Resistor 1 % | Part Number: RL73H2ER12FTDF | Internal Number: 2-1879463-7 | TE Connectivity RoHS : Compliant |
| 91 | ||
![]() Venkel Ltd. | TFCR1206-4W-C-6R12DT | VENKEL LTD | Thin Film CR;1206;1/4W;�50PPM;6.12R;�0.5% RoHS : Compliant | 0 | ||
| TFCR1206-8W-C-4R12CT-1K | VENKEL LTD | Thin Film CR;1206;1/8W;�50PPM;4.12R;�0.25% RoHS : Compliant | 0 | |||
| TFCR1206-8W-E-6R12CT-1K | VENKEL LTD | Thin Film CR;1206;1/8W;�25PPM;6.12R;�0.25% RoHS : Compliant | 0 | |||
| TFCR1206-8W-K-6R12DT | VENKEL LTD | Thin Film CR;1206;1/8W;�100PPM;6.12R;�0.5% RoHS : Compliant | 0 | |||
| TFCR1210-4W-C-6R12FT-1K | VENKEL LTD | Thin Film CR;1210;1/4W;�50PPM;6.12R;�1% RoHS : Compliant | 0 | |||
| TFCR1210-4W-E-3R12FT | VENKEL LTD | Thin Film CR;1210;1/4W;�25PPM;3.12R;�1% RoHS : Compliant | 0 | |||
| PWCR1210-XL-4R12FT | VENKEL LTD | Pulse Withstanding CR;1210;1W;�200PPM;4.12R;�1% RoHS : Compliant | 0 | |||
| TFCR1206-4W-E-3R12CT-1K | VENKEL LTD | Thin Film CR;1206;1/4W;�25PPM;3.12R;�0.25% RoHS : Compliant | 0 | |||
| TFCR1206-8W-E-4R12CT | VENKEL LTD | Thin Film CR;1206;1/8W;�25PPM;4.12R;�0.25% RoHS : Compliant | 0 | |||
| TFCR1206-8W-K-3R12DT | VENKEL LTD | Thin Film CR;1206;1/8W;�100PPM;3.12R;�0.5% RoHS : Compliant | 0 | |||
| TFCR1206-4W-C-4R12DT | VENKEL LTD | Thin Film CR;1206;1/4W;�50PPM;4.12R;�0.5% RoHS : Compliant | 0 | |||
| TFCR1206-8W-E-3R12CT | VENKEL LTD | Thin Film CR;1206;1/8W;�25PPM;3.12R;�0.25% RoHS : Compliant | 0 | |||
| TFCR1210-4W-K-3R12CT-1K | VENKEL LTD | Thin Film CR;1210;1/4W;�100PPM;3.12R;�0.25% RoHS : Compliant | 0 | |||
| TFCR1206-8W-C-3R12FT-1K | VENKEL LTD | Thin Film CR;1206;1/8W;�50PPM;3.12R;�1% RoHS : Compliant | 0 | |||
| TFCR1206-8W-E-4R12DT | VENKEL LTD | Thin Film CR;1206;1/8W;�25PPM;4.12R;�0.5% RoHS : Compliant | 0 | |||
![]() Vyrian | R125464271 | Radiall | RF SMA Connector, 1 Contact(s), Female, Panel Mount, Receptacle RoHS : Compliant | 16,357 | ||
| AVR128DB28-E/SO | Microchip Technology Inc | RISC Microcontroller, 8-Bit, FLASH, AVR CPU, 24MHz, CMOS, PDSO28 RoHS : Compliant | 11,307 | |||
| F3L75R12W1H3B27BOMA1 | Infineon Technologies AG | Insulated Gate Bipolar Transistor, 45A I(C), 1200V V(BR)CES, N-Channel RoHS : Compliant | 10,778 | |||
| HL01R12D15ZH | Texas Instruments | DC-DC Regulated Power Supply Module, 2 Output, 1W, Hybrid RoHS : Unknown | 9,222 | |||
| MBR120VLSFT1 | onsemi | Rectifier Diode, Schottky, 1 Phase, 1 Element, 1A, 20V V(RRM), Silicon RoHS : Compliant | 8,183 | |||
| FP40R12KE3BOSA1 | Infineon Technologies AG | Insulated Gate Bipolar Transistor, 55A I(C), 1200V V(BR)CES, N-Channel RoHS : Compliant | 7,163 | |||
| HL02R12S15ZH | Texas Instruments | DC-DC Regulated Power Supply Module, 1 Output, 2W, Hybrid | 6,958 | |||
| HPR121 | Texas Instruments | DC-DC Unregulated Power Supply Module, 2 Output, 0.75W, Hybrid | 6,774 | |||
| FD400R12KE3HOSA1 | Infineon Technologies AG | Insulated Gate Bipolar Transistor, 580A I(C), 1200V V(BR)CES, N-Channel RoHS : Compliant | 6,758 | |||
| FF1200R12IE5PBPSA1 | Infineon Technologies AG | Insulated Gate Bipolar Transistor, 1200V V(BR)CES, N-Channel RoHS : Compliant | 6,439 | |||
| FS200R12KT4RPBPSA1 | Infineon Technologies AG | Insulated Gate Bipolar Transistor, 280A I(C), 1200V V(BR)CES, N-Channel RoHS : Compliant | 5,349 | |||
| SDR/128GB | Kingston Technology Company | 5,101 | ||||
| AVR128DB64-I/PT | Microchip Technology Inc | RISC Microcontroller, 8-Bit, FLASH, AVR CPU, 24MHz, CMOS, PQFP64 RoHS : Compliant | 4,125 | |||
| 1N4741APE3/TR12 | Microsemi Corporation (now Microchip) | Zener Diode, 11V V(Z), 5%, 1W, Silicon, Unidirectional, DO-204AL RoHS : Compliant | 739 | |||
| R125.444.000 | Radiall | RF SMA Connector, Male, Panel Mount, Solder Terminal, Receptacle RoHS : Compliant | 549 | |||
![]() Waytek, Inc. | AT04-2P-R120YEL | Amphenol Sine Systems | 120 Ohm Terminal Resistor 2 Pin AT w/ Wedgelock J1939 LIKE 38321 DEUTSCH SEALED |
| 2,030 | |
| CFBAR1-250SP | Eaton Electronics | Single 1/4-20 Stud MRBF Fuse Holder 3/8" Mounting Hole HARDWARE NOT INCLUDED 45575 |
| 1,650 | ||
| ATM06-2S-R120GRY | Amphenol Sine Systems | Amphenol Sine Systems ATM06-2S-R120GRY ATM connector plug end cap is a gray 2-way plug with a 120 Ohm, 1/2W terminating resistor. It includes gold-plated terminals and supports sealed CAN/J1939 termination in ATM connector assemblies. |
| 723 | ||
| IN8ASR12W | CIT Relay & Switch | 8mm Flush Mount, Flat Lens, Panel Indicator Light, Red LED 12VDC, w/6" Wire Leads |
| 126 | ||
| IN19ASR12Z | CIT Relay & Switch | 19mm Flush Mount, Flat Lens, Panel Indicator Light, Red LED 12VDC, Screw Terminals |
| 91 | ||
| IN12ASR12W | CIT Relay & Switch | 12mm Flush Mount, Flat Lens, Panel Indicator Light, Red LED 12VDC, w/6" Wire Leads |
| 74 | ||
| 19A-P10-R-120-02 | MP | 120A Series 19 Circuit Breaker Type I Auto Reset Red LED Sensata Klixon SDLA-120 |
| 54 | ||
| SSR-125-004 | Trombetta | Trombetta SSR-125-004 125A Solid State Relay |
| 38 | ||
| 19M-P10-R-120-02 | MP | 120A Series 19 Circuit Breaker Type 3 Manual Reset Button LED Sensata Klixon SDLM-120 |
| 9 | ||
| CFBAR1-250BP | Eaton Electronics | Single 1/4-20 Stud MRBF Fuse Holder 1/2" Mounting Hole HARDWARE NOT INCLUDED |
| 0 | ||
![]() Win Source Electronics | LQG15HNR12J02D | Murata Manufacturing Co Ltd | FIXED IND 120NH 150MA 1.6 OHM RoHS : Compliant |
| 280,721 | |
| IRFR120NTRLPBF | Infineon Technologies AG | MOSFET N-CH 100V 9.4A DPAK RoHS : Compliant |
| 95,240 | ||
| MBR120VLSFT1 | onsemi | Surface Mount Schottky Power Rectifier | DIODE SCHOTTKY 20V 1A SOD123L RoHS : Compliant |
| 88,710 | ||
| SBR12U100P5Q-13 | Diodes Incorporated | DIODE SBR 100V 12A POWERDI5 RoHS : Compliant |
| 20,800 | ||
| MC9S08JR12FAE | Freescale Semiconductor | IC MCU 8BIT 12KB FLASH 48LQFP |
| 20,000 | ||
| SRR1280-100M | Bourns Inc | FIXED IND 10UH 6A 19.5 MOHM SMD RoHS : Compliant |
| 8,000 | ||
| SRR1280-470M | Bourns Inc | SRR1280 Series - Shielded SMD Power Inductors RoHS : Compliant |
| 8,000 | ||
| IRFR120TRL | Vishay Huntington | IRFR120 | MOSFET N-CH 100V 7.7A DPAK |
| 2,061 | ||
| FP25R12W2T4BOMA1 | Infineon Technologies AG | IGBT MOD 1200V 39A 175W RoHS : Compliant |
| 1,710 | ||
| FF600R12ME4 | Infineon Technologies AG | EconoDUAL3 module with Trench/Fieldstop IGBT4 and Emitter Controlled Diode and NTC RoHS : Compliant |
| 1,680 | ||
| FF450R12KT4 | Infineon Technologies AG | Trans IGBT Module N-CH 1200V 580A 2400000mW 7-Pin 62MM-1 Tray / IGBT MODULE 1200V 450A RoHS : Compliant |
| 1,000 | ||
| TSR 1-2450 | Traco Power | DC DC CONVERTER 5V 5W |
| 766 | ||
| FF150R12KS4 | Eupec Gmbh & Co Kg | 62mm C-series module with the fast IGBT2 for high-frequency switching |
| 200 | ||
| FF1400R12IP4 | Infineon Technologies AG | PrimePACK™3 Modul mit Trench/Fieldstopp IGBT4 und Emitter Controlled 4 Diode und NTC RoHS : Compliant |
| 160 | ||
| FF1400R12IP4BOSA1 | Infineon Technologies AG | IGBT MODULE 1200V 1400A RoHS : Compliant |
| 150 | ||
![]() Wuhan P&S | MBR120VLSFT1G | onsemi | Surface Mount Schottky Power Rectifier RoHS : Compliant |
| 120,000 | |
MUR120RLG![]() | onsemi | SWITCHMODE Power Rectifiers RoHS : Compliant |
| 105,000 | ||
| ILB1206ER121V | Vishay Intertechnologies | RoHS : Compliant |
| 9,000 |
| ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |