 |
データシートサーチシステム |
|
|
データシートサーチシステム |
|
S200BG-R 販売店 |
| 販売店 | 部品番号 | メーカー | 部品情報 | Price | Qty. BuyNow | |
 TME | 2CDS200946R0001 | ABB Low Voltage Products and Systems | Auxiliary contacts; Contacts: NC + NO |
| 164 | |
| 2CDS200936R0001 | ABB Low Voltage Products and Systems | Auxiliary contacts |
| 154 | ||
| HS200 1R F | Arcol | Resistor: wire-wound; 1Ω; screw; 200W; ±1%; 1.9kV; 89.7x72.5x41.8mm |
| 16 | ||
| LS200-48 | TDK-Lambda Corporation | Power supply: switching; for building in,modular; 200W; 48VDC RoHS : Compliant |
| 8 | ||
| 2CDS200908R0001 | ABB Low Voltage Products and Systems | Voltage relase |
| 2 | ||
| 2CSS200911R0004 | ABB Low Voltage Products and Systems | Undervoltage relase; 110VAC |
| 0 | ||
| FFMD-20-S-20.00-01 | Samtec Inc | Ribbon cable with IDC connectors; IDC plug,cables; PIN: 40; 20" RoHS : Compliant |
| 0 | ||
| FFMD-25-S-20.00-01-L | Samtec Inc | Ribbon cable with IDC connectors; IDC plug,cables; PIN: 50; 20" RoHS : Compliant |
| 0 | ||
| HCSS-12-S-20.00-01-G | Samtec Inc | Ribbon cable with IDC connectors; IDC plug,cables; PIN: 1x12 RoHS : Compliant |
| 0 | ||
| HS200 0R82 F | Arcol | Resistor: wire-wound; 820mΩ; screw; 200W; ±1%; 1.9kV; 100ppm/°C |
| 0 | ||
| HS200 50R F | Arcol | Resistor: wire-wound; 50Ω; screw; 200W; ±1%; 1.9kV; 100ppm/°C |
| 0 | ||
| IRS2003STRPBF | Infineon Technologies AG | IC: driver; MOSFET half-bridge; high-/low-side,gate driver; SO8 RoHS : Compliant |
| 0 | ||
| JNR13S200L87PU5 | Joyin Co Ltd | Thermistor: NTC; 20Ω; Ø: 13mm; -40÷200°C; 3.2W; ±15%; THT; Ø13mm; bag |
| 0 | ||
| LS200-3.3 | TDK-Lambda Corporation | Power supply: switching; for building in,modular; 200W; 3.3VDC RoHS : Compliant |
| 0 | ||
| 2CDS200912R0001 | ABB Low Voltage Products and Systems | Auxiliary contacts; Contacts: SPDT |
| 0 | ||
 Avnet Americas | NCS20071SN2T1G | onsemi | - Tape and Reel (Alt: NCS20071SN2T1G) RoHS : Compliant |
| 69,000 | |
| SF-1206S200-2 | Bourns Inc | - Tape and Reel (Alt: SF-1206S200-2) RoHS : Not Compliant |
| 10,000 | ||
ECS-200-12-33Q-JES-TR | ECS International Inc | - Tape and Reel (Alt: ECS-200-12-33Q-JES-TR) RoHS : Compliant |
| 6,000 | ||
ECS-200-20-33-DU-TR | ECS International Inc | Crystal 20MHz 20pF 4-Pin SMD T/R - Tape and Reel (Alt: ECS-200-20-33-DU-TR) RoHS : Compliant |
| 5,000 | ||
| ECS-200-18-30BQ-DS | ECS International Inc | - Tape and Reel (Alt: ECS-200-18-30BQ-DS) RoHS : Compliant |
| 4,000 | ||
| ECS-200-20-23A-EN-TR | ECS International Inc | - Tape and Reel (Alt: ECS-200-20-23A-EN-TR) RoHS : Compliant |
| 3,000 | ||
| NCS20072DR2G | onsemi | - Tape and Reel (Alt: NCS20072DR2G) RoHS : Compliant |
| 2,500 | ||
| ECS-200-20-5PX-TR | ECS International Inc | - Tape and Reel (Alt: ECS-200-20-5PX-TR) RoHS : Compliant |
| 2,000 | ||
| 600S200FT250XT | Kyocera AVX Components | SMD Multilayer Ceramic Capacitor, 20 pF, 250 V, 0603 [1608 Metric], ? 1%, C0G / NP0, 600S Series - Tape and Reel (Alt: 600S200FT250XT) RoHS : Compliant |
| 1,500 | ||
| ECS-200-20-4X | ECS International Inc | - Bulk (Alt: ECS-200-20-4X) RoHS : Compliant |
| 1,177 | ||
| ATS200SM-T | CTS Corporation | - Tape and Reel (Alt: ATS200SM-1) RoHS : Compliant |
| 1,000 | ||
| B72207S200K101 | TDK Corporation | - Bulk (Alt: B72207S0200K101) RoHS : Compliant |
| 952 | ||
| RWR84S2000FRS73 | Vishay Intertechnologies | Through Hole Resistor, 200 ohm, RWR Series, 7 W, ? 1%, Axial Leaded, Wirewound, ? 20ppm/?C - Tape and Reel (Alt: RWR84S2000FRS73) RoHS : Not Compliant |
| 500 | ||
| DW-03-07-F-S-200 | Samtec Inc | Conn Board Stacker HDR 3 POS 5.08mmStack Height 2.54mm Solder ST Through Hole - Bulk (Alt: DW-03-07-F-S-200) RoHS : Compliant |
| 50 | ||
| RPS-200-48 | Mean Well | - Boxed Product (Development Kits) (Alt: RPS-200-48) RoHS : Compliant |
| 4 | ||
 Newark | MTMM-101-03-G-S-200 | Samtec Inc | Pin Header, Board-To-Board, 1 Rows; |Samtec, Inc. MTMM-101-03-G-S-200 RoHS : Compliant |
| 2,849 | |
| MTMM-102-05-L-S-200 | Samtec Inc | Hdr, Brd-To-Brd, 2Mm, 2Pos; |Samtec, Inc. MTMM-102-05-L-S-200 RoHS : Compliant |
| 2,150 | ||
| MTSW-108-07-L-S-200 | Samtec Inc | Pin Header, Mtsw-108-07-L-S-200; |Samtec, Inc. MTSW-108-07-L-S-200 RoHS : Not Compliant |
| 1,041 | ||
| MTSW-104-08-T-S-200-LL | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 4Pos; |Samtec, Inc. MTSW-104-08-T-S-200-LL RoHS : Compliant |
| 671 | ||
| MTLW-113-07-G-S-200 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 13Pos; |Samtec, Inc. MTLW-113-07-G-S-200 RoHS : Compliant |
| 628 | ||
| MTLW-140-05-G-S-200 | Samtec Inc | .100 Low Prof Variab Post Hei Term Strip; |Samtec, Inc. MTLW-140-05-G-S-200 RoHS : Compliant |
| 500 | ||
| ZW-01-07-T-S-200-140 | Samtec Inc | Stacking Board Connector, Zw Series; |Samtec, Inc. ZW-01-07-T-S-200-140 RoHS : Compliant |
| 434 | ||
| DW-05-07-S-S-200 | Samtec Inc | Conn Stack Brd, 2.54Mm, 5Pos, Hdr; |Samtec, Inc. DW-05-07-S-S-200 RoHS : Compliant |
| 306 | ||
| DW-08-15-G-S-200 | Samtec Inc | Conn Stack Brd, 2.54Mm, 8Pos, Hdr; |Samtec, Inc. DW-08-15-G-S-200 RoHS : Compliant |
| 265 | ||
| DWM-04-52-G-S-200 | Samtec Inc | Stacking Conn, Header, 4Pos, 1Row; |Samtec, Inc. DWM-04-52-G-S-200 RoHS : Compliant |
| 250 | ||
| MTLW-115-05-S-S-200 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 15Pos; |Samtec, Inc. MTLW-115-05-S-S-200 RoHS : Compliant |
| 221 | ||
| DW-13-12-L-S-200 | Samtec Inc | Conn Stack Brd, 2.54Mm, 13Pos, Hdr; |Samtec, Inc. DW-13-12-L-S-200 RoHS : Compliant |
| 161 | ||
| DWM-08-01-S-S-200 | Samtec Inc | Conn Stack Brd, 1.27Mm, 8Pos, Hdr; |Samtec, Inc. DWM-08-01-S-S-200 RoHS : Compliant |
| 157 | ||
| ZF5S-20-02-T-WT | Samtec Inc | Ffc/Fpc Board Connector, 0.5Mm, 20Cont; |Samtec, Inc. ZF5S-20-02-T-WT RoHS : Compliant |
| 145 | ||
| S200 | Chemtronics | Lead Free Pocket Solder, Type Rom1; Flux Type:Rosin; Flux Applications:Soldering; Dispensing Method:Wipe; Volume:-; Weight:-; Product Range:-; Accessory Type:Pocket Solder; Flux Percent:3% Rohs Compliant: Yes |Chemtronics S200 RoHS : Compliant |
| 0 | ||
 Analog Devices Inc | DS1023S-200+ | Analog Devices Inc | 8-Bit Programmable Timing Elem RoHS : Compliant |
| 3,798 | |
| DS1023S-200+T&R | Analog Devices Inc | 8-Bit Programmable Timing Elem RoHS : Compliant |
| 0 | ||
 RS | RKS200E | Ohmite Mfg Co | RHEOSTAT, WW, REST 200 OHMS, PWR-RTG 100 W, CUR-RTG 0.707 A, LUG, SHAFT 0.25 IN, OPEN RoHS : Compliant |
| 54 | |
| EDS-2008-EL | Moxa Inc | ETHERNET SWITCH, 8 PORT, UNMANAGED, 24 VDC, IP40, METAL, EDS-2008-EL SERIES |
| 52 | ||
| 01046-125 (H20DB-37-SS-200-ABC-5V/V-SM16-EX) | BEI Sensors | ENCODER, INCREMENTAL, OPTICAL, 0.374" SHAFT, 200 CYCLES/TURN, 2 CHANNEL |
| 39 | ||
| S200RA-M | Intervox | SPEAKER, ROUND, FO - 7000 +/- 10 DB HZ, MYLAR/METAL, 9.92 G |
| 27 | ||
| EPS200-1/8-6"-BLACK (7010350251) | 3M | TUBING, HEAT SHRINK, ADHESIVE LINED, FLAME RETARDANT, BLK POLYOLEFIN, 6" L |
| 11 | ||
| BTA23S (20008) | Banner Engineering Corp | FIBER OPTICS, GLASS FIBER, DIFFUSE, LENGTH 1M, THREAD, HIGH TEMP, ANGLE |
| 7 | ||
| LS200-15 (LS20015) | TDK-Lambda Corporation | POWER SUPPLY, AC-DC,15V,13.4A,86-264V IN, ENCLOSED, DIN RAIL, PFC,201W, LS SERIES |
| 6 | ||
| CUS200LD-12 | TDK-Lambda Corporation | AC-DC POWER SUPPLY, 150W, 12V@ 12.5A, 115-230V, CUS200LD SERIES RoHS : Compliant |
| 3 | ||
| LS200-36 (LS20036) | TDK-Lambda Corporation | POWER SUPPLY, AC-DC,36V,5.6A,86-264V IN, ENCLOSED, PANEL MOUNT, PFC,202W, LS SERIES |
| 3 | ||
| E4PA-LS200-M1-N (E4PALS200M1N) | OMRON Industrial Automation | ULTRASONIC SWITCH |
| 2 | ||
| CUS200LD-28 | TDK-Lambda Corporation | POWER SUPPLY, AC-DC, U-CHANNEL, 151W, 28V@5.4A, 115-230V IN RoHS : Compliant |
| 1 | ||
| PS216-Z11-S200 | Schmersal | 103013713 |
| 1 | ||
| 1418083 (NBC-MS/ 20 0-94B/MS SCO US) | Phoenix Contact | CABLE ASSEMBLY;M12 MALE;M12 MALE;ROUND;SHIELDED;65.6FT;20.0M;8-POSITION |
| 1 | ||
| S200 | Chemtronics | SOLDER, CIRCUITWORKS LEAD-FREE POCKET SOLDER, 1MM DIA/3.18M LENGTH |
| 0 | ||
| S200 | B-Line by Eaton | ENCLOSURE, ACCESSORY, S200 |
| 0 | ||
 Microchip Technology Inc | HCS200-I/P | Microchip Technology Inc | Code Hopping Encoder 3.5- 13V, PDIP, Projected EOL: 2036-01-01 RoHS : Compliant |
| 6,960 | |
HCS200T-I/SN | Microchip Technology Inc | Code Hopping Encoder 3.5- 13V, SOIC, Projected EOL: 2036-01-01 RoHS : Compliant |
| 6,600 | ||
| HCS200/P | Microchip Technology Inc | Code Hopping Encoder 3.5- 13V, PDIP, Projected EOL: 2036-01-01 RoHS : Compliant |
| 1,115 | ||
| HCS200-I/SN | Microchip Technology Inc | Code Hopping Encoder 3.5- 13V, SOIC, Projected EOL: 2036-01-01 RoHS : Compliant |
| 330 | ||
| HCS200/SN | Microchip Technology Inc | Code Hopping Encoder 3.5- 13V, SOIC, Projected EOL: 2036-01-01 RoHS : Compliant |
| 100 | ||
| S2005 | Microchip Technology Inc | Std Rectifier _ DO-4, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| TFS2007 | Microchip Technology Inc | TFS2007, Projected EOL: 2050-07-31 - Contact for Pricing RoHS : Compliant | 0 | |||
| 60KS200C | Microchip Technology Inc | Bi-Directional TVS _ Molded Case 11, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| TFS2007A | Microchip Technology Inc | TFS2007A, Projected EOL: 2050-07-31 - Contact for Pricing | 0 | |||
| 90KS200CH3 | Microchip Technology Inc | Bi-Directional TVS _ 5R, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| 90KS200CH1 | Microchip Technology Inc | Bi-Directional TVS _ Molded Case 11, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| 60KS200CH1 | Microchip Technology Inc | Bi-Directional TVS _ Molded Case 11, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| 60KS200CH2 | Microchip Technology Inc | Bi-Directional TVS _ Molded Case 11, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| 60KS200CH3 | Microchip Technology Inc | Bi-Directional TVS _ Molded Case 11, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| IS2008S-203 | Microchip Technology Inc | Bluetooth v4.1 Stereo Headset and DSP Products, VQFN, Projected EOL: 2028-06-08 - Contact for Pricing RoHS : Compliant | 0 | |||
 Rochester Electronics | AFT09S200W02NR3 | NXP Semiconductors | Airfast RF Power LDMOS Transistor RoHS : Compliant |
| 471 | |
BLA1011S-200R,112 | NXP Semiconductors | Power Field-Effect Transistor, 1-Element, N-Channel, Metal-oxide Semiconductor FET RoHS : Compliant |
| 20 | ||
| A2G35S200-01SR3 | NXP Semiconductors | Airfast RF Power GaN Transistor, 3400-3600 MHz, 40 W AVG., 48 V RoHS : Compliant |
| 619 | ||
| NCS20091MUTAG | onsemi | 1 Func, 4000uV Offset-Max, CMOS, PDSO6 RoHS : Compliant |
| 36,000 | ||
| NCS20082DR2G | onsemi | Op Amp Standard 1.2MHz 8-SOIC T/R RoHS : Compliant |
| 148 | ||
| IRS2003PBF | Infineon Technologies AG | Gate Driver RoHS : Compliant |
| 33,350 | ||
FS200R07PE4BOSA1 | Infineon Technologies AG | Insulated Gate Bipolar Transistor, 650V V(BR)CES, N-Channel RoHS : Compliant |
| 111 | ||
| FS200R07A1E3BOMA1 | Infineon Technologies AG | 650 V, 200 A sixpack automotive qualified IGBT module RoHS : Compliant |
| 144 | ||
| FS200R07N3E4RB11BOSA1 | Infineon Technologies AG | IGBT MOD 650V 200A 600W Tray RoHS : Compliant |
| 70 | ||
| FS200R12KT4RPBPSA1 | Infineon Technologies AG | Insulated Gate Bipolar Transistor, 280A I(C), 1200V V(BR)CES, N-Channel RoHS : Compliant |
| 1 | ||
| BLF2324M8LS200PU | Ampleon | Power LDMOS transistor RoHS : Compliant |
| 50 | ||
| CY7C1354S-200AXC | Cypress Semiconductor | ZBT SRAM |
| 167 | ||
71V25761S200BG | Integrated Device Technology Inc | Standard 4.5Mbit 128k x 36 3.135V - 3.465V Parallel 200MHz 3.1ns 119-BGA Tray RoHS : Not Compliant |
| 651 | ||
71V35761S200BQ | Integrated Device Technology Inc | Standard 4.5Mbit 128k x 36 3.135V - 3.465V Parallel 200MHz 3.1ns 165-BGA Tray RoHS : Not Compliant |
| 13 | ||
| IRS2003PBF | International Rectifier | Gate Driver RoHS : Compliant |
| 9,883 | ||
 Sager | MTMM-101-03-G-S-200 | Samtec Inc | Headers & Wire Housings Variable Post Height Header Strips, 2.00 mm Pitch RoHS : Compliant |
| 2,849 | |
| MTMM-102-05-L-S-200 | Samtec Inc | Headers & Wire Housings Variable Post Height Header Strips, 2.00 mm Pitch RoHS : Compliant |
| 2,150 | ||
| MTLW-113-07-G-S-200 | Samtec Inc | Headers & Wire Housings .100 Low Profile Variable Post Height Terminal Strip RoHS : Compliant |
| 628 | ||
| MTLW-140-05-G-S-200 | Samtec Inc | Headers & Wire Housings .100 Low Profile Variable Post Height Terminal Strip |
| 500 | ||
| MTLW-115-05-S-S-200 | Samtec Inc | Headers & Wire Housings .100 Low Profile Variable Post Height Terminal Strip RoHS : Compliant |
| 221 | ||
| MS200/MS200 | Eaton Bussmann | Circuit Breaker Accessories TWIN 200A PMP RPLCMENT SWITCHE-ACB | 0 | |||
| MMSD-02-22C-S-20.00-S-K | Samtec Inc | Rectangular Cable Assemblies Mini-Mate Cable Assembly, 0.100 Pitch RoHS : Compliant |
| 0 | ||
| MMSD-05-22C-S-20.00-S-P | Samtec Inc | Rectangular Cable Assemblies RoHS : Compliant | 0 | |||
| MMSD-05-24-S-20.00-S-K | Samtec Inc | Rectangular Cable Assemblies Mini-Mate Cable Assembly, 0.100 Pitch RoHS : Compliant |
| 0 | ||
| MMSD-10-22-S-20.00-S-K | Samtec Inc | Rectangular Cable Assemblies Mini-Mate Cable Assembly, 0.100 Pitch RoHS : Compliant |
| 0 | ||
| MMSDT-25-24-S-20.00-S-K | Samtec Inc | Rectangular Cable Assemblies RoHS : Compliant | 0 | |||
| MTLW-108-23-G-S-200 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTLW-132-24-G-S-200 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTMM-101-04-T-S-200 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTMM-106-05-L-S-200-003 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
 Coilcraft Direct | 1008CS-200XGLC | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS RoHS : Compliant |
| 0 | |
| SCS-200LD | Coilcraft Inc | Current sensor, SMT, RoHS RoHS : Compliant |
| 0 | ||
| 1008CS-200XGEC | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS Halogen Free RoHS : Compliant |
| 0 | ||
| 1008CS-200XJLC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS RoHS : Compliant |
| 0 | ||
| 1008CS-200XJEC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS Halogen Free RoHS : Compliant |
| 0 | ||
 Ameya Holding Limited | TPS2000EDBVR | Texas Instruments | RoHS : Compliant | 379,481 | ||
| TPS2000EDGKR | Texas Instruments | RoHS : Compliant | 34,090 | |||
| NCS20071SN2T1G | onsemi | General Purpose Amplifier 1 Circuit Rail-to-Rail - TSOP-5 RoHS : Compliant | 28,619 | |||
| TPS2000EDGNR | Texas Instruments | RoHS : Compliant | 23,750 | |||
DS2003CMX/NOPB | Texas Instruments | IC DVR HICURR DARLINGTON 16SOIC RoHS : Compliant | 4,533 | |||
| NCS20074DTBR2G | onsemi | NCS20074 Series 36 V 3 MHz Rail-to-Rail Output Operational Amplifier - TSSOP-14 RoHS : Compliant | 4,191 | |||
| DS2003TM | Texas Instruments | IC DVR DARLING HI CUR/V 16-SOIC RoHS : Not Compliant | 3,874 | |||
| BD9S200MUF-CE2 | ROHM Semiconductor | 车载用2.7V～5.5V 输入 2A MOSFET内置 1ch同步整流 降压 DC/DC转换器 RoHS : Compliant |
| 3,300 | ||
| RB218NS200TL | ROHM Semiconductor | 200V, 20A, 超低IR 肖特基势垒二极管 RoHS : Compliant |
| 1,990 | ||
| RB088NS200TL | ROHM Semiconductor | 200V, 10A, 超低IR 肖特基势垒二极管 RoHS : Compliant |
| 1,000 | ||
| HMTSW-102-07-L-S-200 | Samtec Inc | RoHS : Compliant | 987 | |||
| B72214S200K101 | Infineon Technologies AG | 402 | ||||
| STPS4S200S | STMicroelectronics | STPS4S200 Series 200 V 4 A SMT Power Schottky Rectifier - DO-214AB, SMC RoHS : Compliant | 275 | |||
| RB088NS200FHTL | ROHM Semiconductor | 200V, 10A, 超低IR 车载用肖特基势垒二极管(符合AEC-Q101标准) RoHS : Compliant |
| 100 | ||
| RB218NS200FHTL | ROHM Semiconductor | 200V, 20A, 超低IR 车载用肖特基势垒二极管(符合AEC-Q101标准) RoHS : Compliant |
| 100 | ||
 ComSIT USA | DS2003TMXNOPB | AVAILABLE EU | 1,697 | |||
| STTS2004B2DN3F | STMicroelectronics | AVAILABLE EU RoHS : Compliant | 1,443 | |||
ComSIT USA | NCS20071SN2T1G | onsemi | Operational Amplifier, 1 Func, 4000uV Offset-Max, CMOS, PDSO5 RoHS : Compliant | 30,000 | ||
| B72207S200K101 | TDK Electronics | Varistor, 26V, 1.3J, Through Hole Mount RoHS : Not Compliant | 13,000 | |||
| IRS2001STRPBF | International Rectifier | Buffer/Inverter Based Peripheral Driver, CMOS, PDSO8 RoHS : Compliant | 6,113 | |||
| B72205S200K101V57 | TDK Electronics | SIOV METAL OXIDE VARISTOR Varistor, 26V, 0.6J, Through Hole Mount RoHS : Compliant | 3,000 | |||
| 74HC08DS200 | NXP Semiconductors | QUAD 2-INPUT AND GATE AND Gate, HC/UH Series, 4-Func, 2-Input, CMOS, PDSO14 RoHS : Compliant | 1,645 | |||
| 74HC11DS200 | NXP Semiconductors | TRIPLE 3-INPUT AND GATE AND Gate, HC/UH Series, 3-Func, 3-Input, CMOS, PDSO14 RoHS : Compliant | 1,075 | |||
| IRS2003PBF | International Rectifier | HALF-BRIDGE DRIVER Half Bridge Based Peripheral Driver, CMOS, PDIP8 RoHS : Compliant | 1,020 | |||
| CSTCS2000MX31QTC | Murata Manufacturing Co Ltd | Electronic Component RoHS : Compliant | 1,000 | |||
| MRBS20008 | IXYS Integrated Circuits Division | Electronic Component RoHS : Not Compliant | 445 | |||
| FRS200CA120 | Sanrex Corporation | Rectifier Diode, 1 Phase, 1 Element, 200A, 1200V V(RRM) RoHS : Not Compliant | 341 | |||
| XC3S200A4VQG100I | AMD Xilinx | SPARTAN-3A FPGA Field Programmable Gate Array, 448 CLBs, 200000 Gates, 667MHz, 4032-Cell, CMOS, PQFP100 RoHS : Compliant | 220 | |||
| MLUSS2000V5T128DB | Legerity | USS2000 FOUR-PORT USB2.0 PCI-TO-USB HOST CONTROLLER USB Bus Controller, CMOS, PQFP128 RoHS : Compliant | 20 | |||
| XC2S2006PQG208C | AMD Xilinx | SPARTAN-II 2.5V FPGA Field Programmable Gate Array, 1176 CLBs, 200000 Gates, 263MHz, 5292-Cell, PQFP208 RoHS : Compliant | 20 | |||
| XC3S200A4VQG100C | AMD Xilinx | SPARTAN-3A FPGA Field Programmable Gate Array, 448 CLBs, 200000 Gates, 667MHz, 4032-Cell, CMOS, PQFP100 RoHS : Compliant | 10 | |||
| XC3S200A5FTG256C | AMD Xilinx | Field Programmable Gate Array, 448 CLBs, 200000 Gates, 770MHz, 4032-Cell, CMOS, PBGA256 RoHS : Compliant | 3 | |||
 GLYN GmbH & Co. KG | XC3S200A-4FTG256I | AMD Xilinx | Spartan-3A FPGA 256FTBG -40/100øC RoHS : Compliant | 330 | ||
XC3S200A-4VQG100I | AMD Xilinx | Spartan-3A FPGA 100-VQFP -40/+100øC RoHS : Compliant | 250 | |||
| 070431FB015S200ZU | Suyin Group | 15pol ultra thinDSUB h.density 7731S-1 5G2T RoHS : Compliant | 10 | |||
 Interstate Connecting Components | 85333ES2004PN126 | SOURIAU-SUNBANK | J6270 | 0 | ||
| 983-7S 20-04 PN-A1301 | TE Connectivity | 983-7S 20-04 PN-A1301 | 0 | |||
| CBM36W4S200E2S/AA | Amphenol Positronic | RoHS : Compliant | 0 | |||
| CBM7W2S2000C | Amphenol Positronic | CBM7W2S2000C | 0 | |||
| CBM9W4S2000S | Amphenol Positronic | 0 | ||||
| CBD24W7S2000S/AA | Amphenol Positronic | D-SUB F 24P SOLDER CUP RoHS : Compliant |
| 0 | ||
| YAN6E-10SL-4S-2000 | TE Connectivity | CONN. STRAIGHT PLUG | 0 | |||
| SND50M5S200G/AA | Amphenol Positronic | 0 | ||||
| DD26S200E3S | Amphenol Positronic | RoHS : Not Compliant | 0 | |||
| DD26S200T2X/AA | Amphenol Positronic | RoHS : Compliant | 0 | |||
| DD26S200TX/AA | Amphenol Positronic | RoHS : Compliant | 0 | |||
| DD44S200V30 | Amphenol Positronic | RoHS : Not Compliant | 0 | |||
| DD62S200E0 | Amphenol Positronic | RoHS : Not Compliant | 0 | |||
| DD62S200TS | Amphenol Positronic | RoHS : Not Compliant | 0 | |||
| DD62S200V5X | Amphenol Positronic | RoHS : Not Compliant | 0 | |||
 NexGen Digital | S2AP500U101M1S2001W | Johanson Dielectrics Inc | 141,000 | |||
| CSACS20.00MX53Q-TC | Murata Manufacturing Co Ltd | 29,000 | ||||
| MKS2/0.01/63/5 | Wima | 5,292 | ||||
| ZHCS2000TA | Zetex / Diodes Inc | RoHS : Compliant | 1,067 | |||
| ACASA2002S2002P1AT | Vishay Huntington | 372 | ||||
| ACASA1001S2001P100 | Vishay Huntington | 367 | ||||
XC3S200-4TQG144I | AMD Xilinx | RoHS : Compliant | 88 | |||
| MSS20-047-0805 | MACOM | 20 | ||||
 PEI Genesis | BRR.1S.200.BSG | LEMO connectors |
| 0 | ||
| CA3106E12S2002-10S | ITT Interconnect Solutions |
| 0 | |||
| 06F2001S2006N6 | SOURIAU-SUNBANK |
| 0 | |||
| BRF.3S.200.NAS | LEMO connectors | RoHS : Compliant |
| 0 | ||
| 03F2016S2006CN7 | SOURIAU-SUNBANK |
| 0 | |||
BRR.0S.200.PZVG | LEMO connectors | RoHS : Compliant |
| 0 | ||
| 06A1024S2008CN5 | SOURIAU-SUNBANK |
| 0 | |||
| MIS-20045/2-024 REV L | Amphenol Corporation |
| 0 | |||
| S2006-005 | SOURIAU-SUNBANK |
| 0 | |||
| JRS200111 | Amphenol PCD |
| 0 | |||
| DD104S20000/AA | Amphenol Positronic | RoHS : Compliant |
| 0 | ||
| BRR.1S.200.PZVA | LEMO connectors | RoHS : Compliant |
| 0 | ||
| 06A1015S2004P3 | SOURIAU-SUNBANK |
| 0 | |||
| 06A1001S2008N3 | SOURIAU-SUNBANK |
| 0 | |||
| 06A1012S2007CN3 | SOURIAU-SUNBANK |
| 0 | |||
 PUI | TMS-200MA | 1,725 | ||||
 Chip 1 Exchange | BD5100S_S2_00001 | PanJit Semiconductor | INSTOCK RoHS : Compliant | 56,282 | ||
| ES2000-NO.1-C1-0-90MM | TE Connectivity | INSTOCK RoHS : Compliant | 26,000 | |||
| ES2000-NO.3-B8-0-STK-SH | TE Connectivity | INSTOCK RoHS : Compliant | 12,868 | |||
| FHS 200V 124J 420 | INSTOCK | 4,000 | ||||
| NCS20071SN2T1G | onsemi | INSTOCK RoHS : Compliant | 3,885 | |||
| NCS2003ASN2T1G | onsemi | INSTOCK RoHS : Compliant | 3,565 | |||
| IRS2001STRPBF | INSTOCK | 2,500 | ||||
| S200-3-55-22-9CS2904 | TE Connectivity | INSTOCK RoHS : Compliant | 2,080 | |||
| XC2S200-5FG256C | AMD Xilinx | INSTOCK RoHS : Not Compliant | 35 | |||
| DS2003TN | National Semiconductor Corporation | INSTOCK RoHS : Not Compliant | 24 | |||
| XC2S200-6FG256C | INSTOCK | 9 | ||||
| DS2003TN | INSTOCK | 6 | ||||
| CS2000CP-EZZ | SEMIT | INSTOCK | 5 | |||
| S200-R3 | onsemi | INSTOCK | 4 | |||
| ATS200SM-T | CTS Corporation | INSTOCK RoHS : Compliant | 4 | |||
 Avnet Abacus | POS200GT-73-270KAA | Vitrohm Portuguesa LDA | Resistor 270 kOhm 2 2 W Axial Leaded Metal Oxide Power - Tape and Reel (Alt: POS200GT-73-270KAA) RoHS : Compliant | 119,000 | ||
| B72214S200K101 | TDK Corporation | TVS Varistor 20 VAC 26 VDC StandarD B722 65 V Disc Radial Leaded 14 mm (Alt: B72214S0200K101) RoHS : Compliant | 74,000 | |||
| ECS-200-12-33Q-JES-TR | ECS International Inc | Crystal 20 MHz SMD 32mm x 25mm 50 ppm 12 pF 20 ppm ECX33Q Series - Tape and Reel (Alt: ECS-200-12-33Q-JES-TR) RoHS : Compliant | 33,000 | |||
| B57236S200M | TDK Corporation | Thermistor ICL NTC 20 Ohm 115 mm 28 A B57236S0 (Alt: B57236S0200M000) RoHS : Compliant | 26,000 | |||
| SF-1206S200-2 | Bourns Inc | - Tape and Reel (Alt: SF-1206S200-2) RoHS : Compliant | 25,000 | |||
| B57153S200M51 | TDK Corporation | Thermistor ICL NTC 20 Ohm 85 mm 16 A B57153S0 (Alt: B57153S0200M051) RoHS : Compliant | 21,000 | |||
| B72220S200K101 | TDK Corporation | TVS Varistor 20 VAC 26 VDC StandarD B722 65 V Disc Radial Leaded 20 mm (Alt: B72220S0200K101) RoHS : Compliant | 12,250 | |||
| B66359S2000X | TDK Corporation | Yoke for ETD 291610 Ferrite Core Stainless Spring Steel (Alt: B66359S2000X000) RoHS : Compliant | 7,200 | |||
| TW-06-02-T-S-200-SM-P-FR | Samtec Inc | Board Stackers Spacers Pin Header 508 mm 6 Contacts Solder 1 Rows 2 mm TW Series (Alt: TW-06-02-T-S-200-SM-P-FR) RoHS : Compliant | 5,225 | |||
| 8638PSS2005LF | Amphenol Corporation | Contact SKT Solder Cup ST Cable Mount (Alt: 8638PSS2005LF) RoHS : Compliant | 2,900 | |||
| B72207S200K101 | TDK Corporation | TVS Varistor 250 VAC 320 VDC StandarD B722 650 V Disc Radial Leaded 7 mm (Alt: B72207S0200K101) RoHS : Compliant | 1,500 | |||
ABLS-20.000MHZ-B2-T | Abracon Corporation | Crystal HC49US AT49 20 MHz SMD 115mm x 47mm 50 ppm 18 pF 20 ppm ABLS Series - Tape and Reel (Alt: ABLS-20.000MHZ-B2-T) RoHS : Compliant | 1,000 | |||
| B72210S200K101 | TDK Corporation | TVS Varistor 20 VAC 26 VDC StandarD B722 65 V Disc Radial Leaded 10 mm (Alt: B72210S0200K101) RoHS : Compliant | 500 | |||
| POS200GT-73-1K8AA | Vitrohm Portuguesa LDA | Resistor 18 kOhm 2 2 W Axial Leaded Metal Oxide Power - Tape and Reel (Alt: POS200GT-73-1K8AA) RoHS : Compliant | 0 | |||
| MTMM-102-05-L-S-200 | Samtec Inc | Pin Header BoardtoBoard WiretoBoard 1 Rows 2 Contacts Through Hole MTMM Series (Alt: MTMM-102-05-L-S-200) RoHS : Compliant | 0 | |||
Avnet Asia | NCS20071XV53T2G | onsemi | (Alt: NCS20071XV53T2G) RoHS : Compliant | 40,000 | ||
| NCS20071SN2T1G | onsemi | (Alt: NCS20071SN2T1G) RoHS : Compliant |
| 15,000 | ||
| NCS20061MUTAG | onsemi | Operational Amplifier, 5.5V Rail-to-Rail Input and Output, 3 MHz, Single (Alt: NCS20061MUTAG) RoHS : Compliant |
| 3,000 | ||
| ASWD-S2-0008 | Abracon Corporation | RF SWITCH SPDT 800MHZ TO 6000MHZ 3.3V 6- (Alt: ASWD-S2-0008) RoHS : Compliant | 0 | |||
| NCS20091MUTAG | onsemi | (Alt: NCS20091MUTAG) RoHS : Compliant | 0 | |||
| ECS-200-20-5PXDU-TR | ECS International Inc | Crystal 20MHz 20pF 2-Pin SMD T/R (Alt: ECS-200-20-5PXDU-TR) RoHS : Compliant | 0 | |||
| NCS20082DR2G | onsemi | (Alt: NCS20082DR2G) RoHS : Compliant | 0 | |||
| ECS-200-18-5PX-DN-TR | ECS International Inc | (Alt: ECS-200-18-5PX-DN-TR) RoHS : Compliant |
| 0 | ||
ECS-200-20-3X-EN-TR | ECS International Inc | Crystal 20MHz 20pF 2-Pin HC-49/US T/R (Alt: ECS-200-20-3X-EN-TR) RoHS : Compliant | 0 | |||
| NCS20072DR2G | onsemi | (Alt: NCS20072DR2G) RoHS : Compliant | 0 | |||
| B6252S2-001-NT3GP-75 | Amphenol Corporation | (Alt: B6252S2-001-NT3GP-75) RoHS : Compliant | 0 | |||
| ECS-200-20-23A-EN-TR | ECS International Inc | (Alt: ECS-200-20-23A-EN-TR) RoHS : Compliant | 0 | |||
| ECS-200-CDX-0914 | ECS International Inc | (Alt: ECS-200-CDX-0914) RoHS : Compliant |
| 0 | ||
| SIT8924BA-73-18S-2.000000E | SiTime Corporation | SCTSIT8924BA-73-18S-2.000000E CRYSTAL OS (Alt: SIT8924BA-73-18S-2.000000E) RoHS : Compliant | 0 | |||
| DW-12-07-T-S-200 | Samtec Inc | (Alt: DW-12-07-T-S-200) RoHS : Compliant | 0 | |||
 Avnet Silica | STPS4S200S | STMicroelectronics | Diode Schottky 200V 4A 2Pin DO214AB TR (Alt: STPS4S200S) RoHS : Compliant | 7,052,500 | ||
| STPS4S200B-TR | STMicroelectronics | Schottky Rectifier 200 V 4 A Single TO252 DPAK 2 Pins 870 mV (Alt: STPS4S200B-TR) RoHS : Compliant | 1,687,500 | |||
| NCS20071SN2T1G | onsemi | (Alt: NCS20071SN2T1G) RoHS : Compliant | 18,000 | |||
ZLLS2000TA | Diodes Incorporated | (Alt: ZLLS2000TA) RoHS : Compliant | 9,000 | |||
| NCS20081SN3T1G | onsemi | (Alt: NCS20081SN3T1G) RoHS : Compliant | 6,000 | |||
| ZLLS2000QTA | Diodes Incorporated | (Alt: ZLLS2000QTA) RoHS : Compliant | 3,000 | |||
| NCS20061SN2T1G | onsemi | (Alt: NCS20061SN2T1G) RoHS : Compliant | 3,000 | |||
| SIT1618BE-11-XXS-20.000000E | SiTime Corporation | (Alt: SIT1618BE-11-XXS-20.000000E) RoHS : Compliant | 3,000 | |||
STPS200170TV1 | STMicroelectronics | Diode Module 170 V 200 A 630 mV Dual Isolated ISOTOP 4 Pins (Alt: STPS200170TV1) RoHS : Compliant | 2,580 | |||
| NCS20082DR2G | onsemi | (Alt: NCS20082DR2G) RoHS : Compliant | 0 | |||
| NCS20091MUTAG | onsemi | (Alt: NCS20091MUTAG) RoHS : Compliant | 0 | |||
| NCS2003ASN2T1G | onsemi | Operational Amplifier High Slew Rate Low Voltage RailtoRail Output 7 MHz High Slew Rate RailtoRail Output Single OpAmp with 3mV VOSONSSPCAPLFRS (Alt: NCS2003ASN2T1G) RoHS : Compliant | 0 | |||
| SIT8924BA-78-33S-20.000000 | SiTime Corporation | (Alt: SIT8924BA-78-33S-20.000000) RoHS : Compliant | 0 | |||
| SIT1618BA-12-XXS-20.000000E | SiTime Corporation | (Alt: SIT1618BA-12-XXS-20.000000E) RoHS : Compliant | 0 | |||
| XEGARD-H0-0000-000-000000S2001 | Cree, Inc. | LED Single Chip Red 630nm 3A 3Pin SMD TR (Alt: XEGARD-H0-0000-000-000000S2001) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | AMMLPABVJS-20.0000T | Abracon Corporation |
| 0 | ||
| ASWD-S2-0003-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ASWD-S2-0009-Q-T | Abracon Corporation |
| 0 | |||
| ABLS-20.000MHZ-D-3-Y-T | Abracon Corporation | CRYSTAL 20.0000MHZ 18PF SMD RoHS : Compliant |
| 0 | ||
| AMMLPDALJS-20.0000T | Abracon Corporation |
| 0 | |||
| AMMLPEALCS-20.0000T | Abracon Corporation |
| 0 | |||
| AMMLPVBVCS-20.0000T | Abracon Corporation |
| 0 | |||
| ASWD-S2-0005-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AMES200-15SNZ-PQ | Aimtec | RoHS : Compliant |
| 0 | ||
| AMMLPEBVRS-20.0000T | Abracon Corporation |
| 0 | |||
| ABLS-20.000MHZ-D4Y-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AMES200-48SNZ-P | Aimtec | RoHS : Compliant |
| 0 | ||
| AMMLPABVCS-20.0000T | Abracon Corporation |
| 0 | |||
| AMMLPVBLJS-20.0000T | Abracon Corporation |
| 0 | |||
| ABLS-20.000MHZ-16-A-4-H-T | Abracon Corporation | CRYSTAL 20.0000MHZ 16PF SMD RoHS : Compliant |
| 0 | ||
 Component Electronics, Inc | CF-T/R-1/4WS-200KJ | CC OHM | IN STOCK SHIP TODAY |
| 25,000 | |
| MDS-200ADB12-AA | Delta Electronics Inc | IN STOCK SHIP TODAY |
| 5,704 | ||
| S2008DS2RP | Littelfuse Inc | IN STOCK SHIP TODAY | 2,000 | |||
| FOXS/200 | Fox Electronics | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 1,544 | ||
| AS-20.000-18-SMD-T | Raltron Electronics Corporation | IN STOCK SHIP TODAY |
| 868 | ||
| ABLS-20.000MHZ-T | Abracon Corporation | IN STOCK SHIP TODAY RoHS : Unknown |
| 500 | ||
| DW-04-08-G-S-200 | Samtec Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 200 | ||
| EC1100HSTS-20.000M | Ecliptek Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 135 | ||
S2008LS2 | Teccor | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 100 | ||
| ECS-200-20-4 | ECS International Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 100 | ||
| MKS2-0.015/63/5-PCM5 | Wima | IN STOCK SHIP TODAY |
| 58 | ||
| ZF5S-20-01-T-WT-TR | Samtec Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 14 | ||
| AALCS-20.0 | Alcatel-Lucent | IN STOCK SHIP TODAY | 8 | |||
| MTSW-150-07-G-S-200 | Samtec Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 6 | ||
| BL-FS200B | IN STOCK SHIP TODAY |
| 2 | |||
 DB Roberts | TCBS-20-01 | Essentra Components | CB SPT,THRD FEM,NAT,1-1/4 IN S | 0 | ||
| HIS200-RB | Essentra Components | 0 | ||||
| ECS-2000 | Essentra Components | 0 | ||||
| SCRL2-15S-200A | Sugatsune Kogyo Co Ltd | FULLY STAINLESS STEEL MINI GUI | 0 | |||
| AD68ALS2001 | Pop Rivets | RIVET-LS-3/16X.500 AL/AL | 0 | |||
| FPQS2000 | Essentra Components | 2.000IN ID QUICK FIRE SLEEVEGL | 0 | |||
| 010632S200 | Essentra Components | SET SCREW, SLOTTED HEAD, 6-32 | 0 | |||
| AD66ABS200 | Pop Rivets | ALUM OPEN END RIVET | 0 | |||
| ECS2000A | Essentra Components | FLANGED CAP - NPT THREADLDPE N | 0 | |||
| DSI-4254S200-45 | Sugatsune Kogyo Co Ltd | SS HANDLE H200, W45, D50 | 0 | |||
| 012520S200 | Essentra Components | SET SCREW, SLOTTED HEAD, 14-20 | 0 | |||
| SD62BS200 | Pop Rivets | STEEL OPEN END RIVET | 0 | |||
| LCBS-20-01 | Essentra Components | CB SptDual LckNatural1-1/4 in Spc CB Spt Dual Lock Natural | 0 | |||
| CA-3118S-200 | SHEREX FASTENING SO | 0 | ||||
| 011032S200 | Essentra Components | SET SCREW, SLOTTED HEAD, 10-32 | 0 | |||
 EBV Elektronik | NCS20082DR2G | onsemi | (Alt: NCS20082DR2G) RoHS : Compliant | 7,500 | ||
TS2007EIJT | STMicroelectronics | Audio Power Amplifier Mono 1 Channel 3W x 1 4Ohm 24 V to 55 V 9 Pins FlipChip (Alt: TS2007EIJT) RoHS : Compliant | 5,000 | |||
| IRS2005MTRPBF | Infineon Technologies AG | IGBTMOSFET Driver 2 Channels High Side and Low Side 600 mA 10 V to 20 V 150 ns 14 Pins MLPQ (Alt: SP001534270) RoHS : Compliant | 3,000 | |||
| NCS2005SN1T1G | onsemi | Operational Amplifier Low Power 8 MHz GBW RailtoRail InputOutput ONSSPCAPLFRS (Alt: NCS2005SN1T1G) RoHS : Compliant | 3,000 | |||
| NCS20034DR2G | onsemi | Quad OpAmp 7 MHz High Slew Rate RailtoRail Output ONSSPCAPLFRS (Alt: NCS20034DR2G) RoHS : Compliant | 2,500 | |||
| STPS4S200B-TR | STMicroelectronics | Schottky Rectifier 200 V 4 A Single TO252 DPAK 2 Pins 870 mV (Alt: STPS4S200B-TR) RoHS : Compliant | 2,500 | |||
| BXRE-30S2001-C-73 | Bridgelux Inc | COB LED Warm White 630 mA 95 CRI 14 mm 120 2520 lm 217 W 3000 K 344V Round Flat Top (Alt: BXRE-30S2001-C-73) RoHS : Compliant | 975 | |||
| BXRE-35S2001-C-73 | Bridgelux Inc | LED COB Warm White 3500K 1260mA Tube (Alt: BXRE-35S2001-C-73) RoHS : Compliant | 375 | |||
| BXRE-57S2001-C-73 | Bridgelux Inc | COB LED Cool White 630 mA 95 CRI 14 mm 120 2810 lm 217 W 5700 K 344V Round Flat Top (Alt: BXRE-57S2001-C-73) RoHS : Compliant | 350 | |||
| BXRE-65S2001-C-74 | Bridgelux Inc | LED COB Cool White 6500K 1260mA Tube (Alt: BXRE-65S2001-C-74) RoHS : Compliant | 300 | |||
| BXRE-27S2001-C-73 | Bridgelux Inc | COB LED Warm White 630 mA 95 CRI 14 mm 120 2330 lm 217 W 2700 K 344V Round Flat Top (Alt: BXRE-27S2001-C-73) RoHS : Compliant | 250 | |||
| BXRE-40S2001-C-73 | Bridgelux Inc | LED COB Neutral White 4000K 1260mA Tube (Alt: BXRE-40S2001-C-73) RoHS : Compliant | 200 | |||
| BXRE-57S2001-C-74 | Bridgelux Inc | LED COB Cool White 5700K 1260mA Tube (Alt: BXRE-57S2001-C-74) RoHS : Compliant | 100 | |||
| BXRE-50S2001-C-74 | Bridgelux Inc | LED COB Neutral White 5000K 1260mA Tube (Alt: BXRE-50S2001-C-74) RoHS : Compliant | 25 | |||
| BXEB-L0560Z-40S2000-C-C3 | Bridgelux Inc | EB Series Thrivet LED MODULE CCT4000K CRI97 (Alt: BXEB-L0560Z-40S2000-C-C3) RoHS : Compliant | 0 | |||
 ECCO | EPS-2001/2INBL48INB | 3M |
| 1,290 | ||
| EPS-2003/4INBL48INB | 3M |
| 48 | |||
 Flip Electronics | NCS2003XV53T2G | onsemi | Stock, Ship Today RoHS : Compliant |
| 2,072,000 | |
| NCS20092DTBR2G | onsemi | Stock RoHS : Compliant | 57,500 | |||
| NCS20091SN3T1G | onsemi | Stock, Ship Today RoHS : Compliant |
| 35,756 | ||
| NCS2004AMUTAG | onsemi | Stock, Ship Today RoHS : Compliant |
| 21,000 | ||
| NCS20032DTBR2G | onsemi | Stock, Ship Today RoHS : Compliant | 20,000 | |||
| SS2003M-TL-W | onsemi | Stock, Ship Today RoHS : Compliant |
| 5,300 | ||
| NCS20094DTBR2G | onsemi | Stock, Ship Today RoHS : Compliant | 4,965 | |||
| NCS20081SQ2T2G | onsemi | Stock, Ship Today RoHS : Compliant |
| 2,853 | ||
| MRF6S20010NR1 | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 2,690 | ||
NCS2002SN1T1G | onsemi | Stock, Ship Today RoHS : Compliant |
| 2,679 | ||
| NCS20091MUTAG | onsemi | Stock, Ship Today RoHS : Compliant | 1,450 | |||
| NCS20082DR2G | onsemi | Stock, Ship Today RoHS : Compliant |
| 812 | ||
| NCS20072DR2G | onsemi | Stock, Ship Today RoHS : Compliant |
| 207 | ||
| BLS7G3135LS-200U | Flip Electronics Manufacturing Services | Stock, Ship Today | 54 | |||
| CY7C1360S-200AXI | Infineon Technologies AG | Stock, Ship Today |
| 41 | ||
 Master Electronics | MMSD-02-20C-S-20.00-S-K | Samtec Inc | RoHS : Compliant |
| 0 | |
| MMSD-02-22C-S-20.00-S-K | Samtec Inc | Cable Assembly Discrete Wire 0.508m 4 POS Discrete Wire Housing RCP RoHS : Compliant |
| 0 | ||
| MMSD-05-22C-S-20.00-S-P | Samtec Inc | .100 Mini Mate® Double Row Discrete Wire Cable Assembly Socket RoHS : Compliant |
| 0 | ||
| MMSD-05-24-S-20.00-S-K | Samtec Inc | .100 Mini Mate® Double Row Discrete Wire Cable Assembly Socket RoHS : Compliant |
| 0 | ||
| MMSD-10-22-S-20.00-S-K | Samtec Inc | .100 Mini Mate® Double Row Discrete Wire Cable Assembly Socket RoHS : Compliant |
| 0 | ||
| MMSDT-25-24-S-20.00-S-K | Samtec Inc | .100 Mini Mate® Double Row Discrete Wire Teflon® Cable Assembly Socket RoHS : Compliant |
| 0 | ||
| MMSS-12-22C-S-20.00-S-K-M | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MMSST-04-24-S-20.00-S-K | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTLW-103-05-T-S-200 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTLW-104-06-L-S-200 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTLW-108-23-G-S-200 | Samtec Inc | .100 Low Profile Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MTLW-113-07-G-S-200 | Samtec Inc | .100 Low Profile Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MTLW-115-05-S-S-200 | Samtec Inc | .100 Low Profile Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MTLW-132-24-G-S-200 | Samtec Inc | .100 Low Profile Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MTLW-140-05-G-S-200 | Samtec Inc | .100 Low Profile Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE3W04559/HS-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. TNC Female Bulkhead to TNC Male Right Angle Cable 200 cm Length Using PE-P195 Coax with HeatShrink., Radio frequency assembly TNC female bulkhead to TNC male right angle cable 200 cm length using PE-P195 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. TNC female bulkhead to TNC male right angle cable 200 cm length using PE-P195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC bulkhead cable connection on one end and right angle TNC cable connection on the other. Our TNC to right angle TNC cable assemblies have a female gender on end 1 and male on end 2. This TNC to TNC cable is a female to male coax assembly, PE3W04559/HS-200CM, can also be known as a TNC jack to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. TNC jack to TNC plug cable assembly PE3W04559/HS-200CM is built with PE-P195 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to right angle TNC cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 3 GHz maximum frequency TNC female bulkhead to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04559/HS-200CM can also be used in the other direction and will be right angle TNC male to TNC female bulkhead cable assembly if the opposite connectivity is required. TNC jack bulkhead to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC female bulkhead to TNC male right angle cable 200 cm length using PE-P195 coax with heatshrink. |
| 933 | |
| PE3W02398/HS-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. SMA Male to N Female Cable 200 cm Length Using LMR-240-UF Coax with HeatShrink., Radio frequency assembly SMA male to N female cable 200 cm length using LMR-240-UF coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male to N female cable 200 cm length using LMR-240-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and type N cable connection on the other. Our low loss SMA to N type cable assemblies have a male gender on end 1 and female on end 2. This SMA to type N cable is a male to female coax assembly, PE3W02398/HS-200CM, can also be known as a low loss SMA plug to N type jack cable assembly and will be shipped same-day as it is purchased. SMA plug to type N jack cable assembly PE3W02398/HS-200CM is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to N type female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W02398/HS-200CM can also be used in the other direction and will be type N female to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N female cable 200 cm length using LMR-240-UF coax with heatshrink. |
| 922 | ||
| PE3W09965/HS-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: Double Banana, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. Double Banana Plug to SMA Male Right Angle Low Loss Cable 200 cm Length Using PE-P195 Coax with HeatShrink., Radio frequency assembly double banana plug to SMA male right angle low loss cable 200 cm length using PE-P195 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. Double banana plug to SMA male right angle low loss cable 200 cm length using PE-P195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom double banana to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with double banana cable connection on one end and right angle SMA cable connection on the other. Our low loss double banana to right angle SMA cable assemblies have a plug gender on end 1 and male on end 2. This double banana to SMA cable is a plug to male coax assembly, PE3W09965/HS-200CM, can also be known as a low loss double banana male to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. Double banana male to SMA plug cable assembly PE3W09965/HS-200CM is built with PE-P195 which is a flexible coax type. The Pasternack flexible Double Banana cable assembly is manufactured with double banana to right angle SMA cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 12.4 GHz maximum frequency double banana plug to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W09965/HS-200CM can also be used in the other direction and will be right angle SMA male to double banana plug cable assembly if the opposite connectivity is required. Low loss double banana male to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality double banana to SMA cable assembly for quick shipment worldwide. Variations of double banana cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this double banana plug to SMA male right angle low loss cable 200 cm length using PE-P195 coax with heatshrink. |
| 380 | ||
| PE3W05629LF/HS-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. SMA Male to N Female Bulkhead Cable 200 cm Length Using LMR-400-UF Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male to N female bulkhead cable 200 cm length using LMR-400-UF coax with heatshrink, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to N female bulkhead cable 200 cm length using LMR-400-UF coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and type N bulkhead cable connection on the other. Our SMA to N type cable assemblies have a male gender on end 1 and female on end 2. This SMA to type N cable is a male to female coax assembly, PE3W05629LF/HS-200CM, can also be known as a SMA plug to type N jack cable assembly and will be shipped same-day as it is purchased. SMA plug to N type jack cable assembly PE3W05629LF/HS-200CM is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency SMA male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W05629LF/HS-200CM can also be used in the other direction and will be N type female bulkhead to SMA male cable assembly if the opposite connectivity is required. SMA plug to N type jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N female bulkhead cable 200 cm length using LMR-400-UF coax with heatshrink, LF solder. |
| 132 | ||
| PE3C4769/HS-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. SMA Female Bulkhead to SMA Male Right Angle Low Loss Cable 200 cm Length Using LMR-195 Coax with HeatShrink., Radio frequency assembly SMA female bulkhead to SMA male right angle low loss cable 200 cm length using LMR-195 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA female bulkhead to SMA male right angle low loss cable 200 cm length using LMR-195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA bulkhead cable connection on one end and right angle SMA cable connection on the other. Our low loss SMA to right angle SMA cable assemblies have a female gender on end 1 and male on end 2. This SMA to SMA cable is a female to male coax assembly, PE3C4769/HS-200CM, can also be known as a low loss SMA jack to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA plug cable assembly PE3C4769/HS-200CM is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA female bulkhead to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4769/HS-200CM can also be used in the other direction and will be right angle SMA male to SMA female bulkhead cable assembly if the opposite connectivity is required. Low loss SMA jack bulkhead to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female bulkhead to SMA male right angle low loss cable 200 cm length using LMR-195 coax with heatshrink. |
| 64 | ||
| PE3W05034LF/HS-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 3.5mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. 3.5mm Male to SMA Male Cable 200 cm Length Using RG402 Coax with HeatShrink, LF Solder., Radio frequency assembly 3.5mm male to SMA male cable 200 cm length using RG402 coax with heatshrink, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 3.5mm male to SMA male cable 200 cm length using RG402 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 3.5mm to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 3.5mm cable connection on one end and SMA cable connection on the other. Our 3.5mm to SMA cable assemblies have a male gender on end 1 and male on end 2. This 3.5mm to SMA cable is a male to male coax assembly, PE3W05034LF/HS-200CM, can also be known as a 3.5mm plug to SMA plug cable assembly and will be shipped same-day as it is purchased. 3.5mm plug to SMA plug cable assembly PE3W05034LF/HS-200CM is built with RG402 which is a semi-rigid coax type. The Pasternack semi-rigid 3.5mm cable assembly is manufactured with 3.5mm to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency 3.5mm male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W05034LF/HS-200CM can also be used in the other direction and will be SMA male to 3.5mm male cable assembly if the opposite connectivity is required. 3.5mm plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to SMA cable assembly for quick shipment worldwide. Variations of 3.5mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 3.5mm male to SMA male cable 200 cm length using RG402 coax with heatshrink, LF solder. |
| 17 | ||
| PE3W08444/HS-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: FAKRA, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: FAKRA, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Plastic, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.74 inches. Black FAKRA Plug to Black FAKRA Jack Low Loss Cable 200 CM Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly black FAKRA plug to black FAKRA jack low loss cable 200 cm length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Black FAKRA plug to black FAKRA jack low loss cable 200 cm length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FAKRA to FAKRA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with FAKRA cable connection on one end and FAKRA cable connection on the other. Our low loss FAKRA to FAKRA cable assemblies have a plug gender on end 1 and jack on end 2. PE3W08444/HS-200CM can also be known as a low loss FAKRA male to FAKRA female cable assembly and will be shipped same-day as it is purchased. FAKRA male to FAKRA female cable assembly PE3W08444/HS-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with FAKRA to FAKRA cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this 4 GHz maximum frequency FAKRA plug to FAKRA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08444/HS-200CM can also be used in the other direction and will be FAKRA jack to FAKRA plug cable assembly if the opposite connectivity is required. Low loss FAKRA male to FAKRA female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FAKRA to FAKRA cable assembly for quick shipment worldwide. Variations of FAKRA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this black FAKRA plug to black FAKRA jack low loss cable 200 cm length using LMR-100 coax with heatshrink. |
| 0 | ||
| PE3W11752LF/HS-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: MMCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. MMCX Plug to Push-On SMP Female Right Angle Low Loss Cable 200 CM Length Using LMR-100 Coax with HeatShrink, LF Solder., Radio frequency assembly MMCX plug to push-on SMP female right angle low loss cable 200 cm length using LMR-100 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The MMCX plug to push-on SMP female right angle low loss cable 200 cm length using LMR-100 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MMCX to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a MMCX cable connection on one end and a right angle SMP cable connection on the other. Our low loss MMCX to right angle SMP cable assembly has a plug gender on end 1 and a female on end 2. PE3W11752LF/HS-200CM can also be known as a low loss MMCX male to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W11752LF/HS-200CM RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our MMCX plug to right angle SMP female cable has a maximum VSWR of 1.4:1. MMCX male to SMP jack cable assembly PE3W11752LF/HS-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible MMCX cable assembly is manufactured with MMCX to right angle SMP cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W11752LF/HS-200CM can also be used in the other direction and will be a right angle SMP female to MMCX plug cable assembly if the opposite connectivity is required. Low loss MMCX male to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MMCX to SMP cable assembly for quick shipment worldwide. Variations of MMCX and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MMCX to SMP low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C1101/HS-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.74 inches. N Female Bulkhead to SMA Male Low Loss Cable 200 CM Length Using LMR-100 Coax with HeatShrink., Pasternack’s PE3C1101/HS-200CM low loss type N female bulkhead to SMA male RF cable assembly using LMR-100A coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The type N female to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N bulkhead cable connection on one end and an SMA cable connection on the other. Our type N to SMA cable assembly has a female gender on end 1 and a male on end 2. PE3C1101/HS-200CM can also be known as a low loss type N jack to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1101/HS-200CM RF cable has a pvc jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our bulkhead type N female to SMA male cable has a maximum VSWR of 1.4:1. This PE3C1101/HS-200CM type N jack to SMA plug cable assembly is built with LMR-100A, which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications, and CAD drawings for this 78.74-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3C1101/HS-200CM can also be used in the other direction and will be an SMA male to type N female bulkhead cable assembly if the opposite connectivity is required. This low loss type N jack bulkhead to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMA low loss RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C2139LF/HS-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. BNC Male to BNC Male Low Loss Cable 200 cm Length Using LMR-100 Coax with HeatShrink, LF Solder., Radio frequency assembly BNC male to BNC male low loss cable 200 cm length using LMR-100 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to BNC male low loss cable 200 cm length using LMR-100 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our low loss BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. PE3C2139LF/HS-200CM can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3C2139LF/HS-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male low loss cable 200 cm length using LMR-100 coax with heatshrink, LF solder. |
| 0 | ||
| PE3C2229/HS-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. BNC Male to SMA Male Low Loss Cable 200 CM Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly BNC male to SMA male low loss cable 200 cm length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to SMA male low loss cable 200 cm length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a SMA cable connection on the other. Our low loss BNC to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3C2229/HS-200CM can also be known as a low loss BNC plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2229/HS-200CM RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our BNC male to SMA male cable has a maximum VSWR of 1.4:1. BNC plug to SMA plug cable assembly PE3C2229/HS-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/crimp attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C2229/HS-200CM can also be used in the other direction and will be a SMA male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to SMA cable assembly for quick shipment worldwide. Variations of BNC and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W00201LF/HS-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. SMA Male Right Angle to N Male Cable 200 cm Length Using RG400 Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male right angle to N male cable 200 cm length using RG400 coax with heatshrink, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to N male cable 200 cm length using RG400 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and type N cable connection on the other. Our right angle SMA to N type cable assemblies have a male gender on end 1 and male on end 2. This SMA to type N cable is a male to male coax assembly, PE3W00201LF/HS-200CM, can also be known as a right angle SMA plug to type N plug cable assembly and will be shipped same-day as it is purchased. SMA plug to N type plug cable assembly PE3W00201LF/HS-200CM is built with RG400 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 11 GHz maximum frequency SMA right angle male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W00201LF/HS-200CM can also be used in the other direction and will be type N male to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to N type cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to N male cable 200 cm length using RG400 coax with heatshrink, LF solder. |
| 0 | ||
| PE3W02270LF/HS-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. SMA Male to MCX Plug Cable 200 cm Length Using RG316 Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male to MCX plug cable 200 cm length using RG316 coax with heatshrink, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to MCX plug cable 200 cm length using RG316 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to MCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and MCX cable connection on the other. Our SMA to MCX cable assemblies have a male gender on end 1 and plug on end 2. This SMA to MCX cable is a male to plug coax assembly, PE3W02270LF/HS-200CM, can also be known as a SMA plug to MCX male cable assembly and will be shipped same-day as it is purchased. SMA plug to MCX male cable assembly PE3W02270LF/HS-200CM is built with RG316 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to MCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMA male to MCX plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W02270LF/HS-200CM can also be used in the other direction and will be MCX plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to MCX male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to MCX cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to MCX plug cable 200 cm length using RG316 coax with heatshrink, LF solder. |
| 0 | ||
| PE3W08933/HS-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length, Max: 78.74 inches. BNC Male Right Angle to N Male Cable 200 CM Length Using RG58 Coax with HeatShrink., Radio frequency assembly BNC male right angle to N male cable 200 cm length using RG58 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC male right angle to N male cable 200 cm length using RG58 coax with heatshrink, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle BNC cable connection on one end and N type cable connection on the other. Our right angle BNC to type N cable assemblies have a male gender on end 1 and male on end 2. PE3W08933/HS-200CM can also be known as a right angle BNC plug to type N plug cable assembly and will be shipped same-day as it is purchased. BNC plug to N type plug cable assembly PE3W08933/HS-200CM is built with RG58 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with right angle BNC to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC right angle male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08933/HS-200CM can also be used in the other direction and will be type N male to right angle BNC male cable assembly if the opposite connectivity is required. BNC right angle plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to N type cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male right angle to N male cable 200 cm length using RG58 coax with heatshrink. |
| 0 | ||
| PE3W14666/HS-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: BMA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. Slide-On BMA Jack 2 Hole Flange to SMA Female Bulkhead Low Loss Cable 200 CM Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly slide-on BMA jack 2 hole flange to SMA female bulkhead low loss cable 200 cm length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The slide-on BMA jack 2 hole flange to SMA female bulkhead low loss cable 200 cm length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BMA 2 hole flange cable connection on one end and a SMA bulkhead cable connection on the other. Our low loss BMA to SMA cable assembly has a jack gender on end 1 and a female on end 2. PE3W14666/HS-200CM can also be known as a low loss BMA female to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W14666/HS-200CM RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. BMA female to SMA jack cable assembly PE3W14666/HS-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W14666/HS-200CM can also be used in the other direction and will be a SMA female bulkhead to BMA jack 2 hole flange cable assembly if the opposite connectivity is required. Low loss BMA female 2 hole flange to SMA jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BMA to SMA cable assembly for quick shipment worldwide. Variations of BMA and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
 Vyrian | 75K72234S200BRI | Broadcom Limited | 4,736 | |||
| BLF7G15LS-200,112 | NXP Semiconductors | Power Field-Effect Transistor, 56A I(D), 1-Element, N-Channel, Metal-oxide Semiconductor FET RoHS : Compliant | 4,305 | |||
| KTS2000/32 | Kingston Technology Company | 4,017 | ||||
XC3S2000-4FGG1156C | AMD Xilinx | Field Programmable Gate Array, 192 CLBs, 50000 Gates, PBGA1156 | 3,545 | |||
XC3S200-4FGG676I | AMD Xilinx | Field Programmable Gate Array, 192 CLBs, 50000 Gates, PBGA676 RoHS : Compliant | 3,423 | |||
XC3S200AN-5FGG484C | AMD Xilinx | Field Programmable Gate Array, 448 CLBs, 200000 Gates, 770MHz, CMOS, PBGA484 RoHS : Compliant | 3,319 | |||
| 90KS200CH3 | Microchip Technology Inc | Trans Voltage Suppressor Diode, 90000W, Bidirectional, 1 Element, Silicon RoHS : Compliant | 3,230 | |||
XC2S200-5PQ208I | AMD Xilinx | Field Programmable Gate Array, 1176 CLBs, 200000 Gates, 263MHz, 5292-Cell, PQFP208 RoHS : Compliant | 3,120 | |||
| XA3S200-4TQ144Q | AMD Xilinx | Field Programmable Gate Array, 125MHz, 4320-Cell, PQFP144 RoHS : Not Compliant | 3,115 | |||
| XC17S200XLPDG8I | AMD Xilinx | Configuration Memory, 1335872X1, Serial, CMOS, PDIP8 RoHS : Compliant | 2,718 | |||
BLS7G2730LS-200PU | NXP Semiconductors | Power Field-Effect Transistor, N-Channel, Metal-oxide Semiconductor FET RoHS : Compliant | 2,462 | |||
| XC3S200-4FGG1156C | AMD Xilinx | Field Programmable Gate Array, 192 CLBs, 50000 Gates, PBGA1156 | 1,949 | |||
| XC2S200-6FG256C | AMD Xilinx | Field Programmable Gate Array, 1176 CLBs, 200000 Gates, 263MHz, 5292-Cell, PBGA256 RoHS : Not Compliant | 1,868 | |||
| XC3S2000-4FG1156I | AMD Xilinx | Field Programmable Gate Array, 192 CLBs, 50000 Gates, PBGA1156 | 1,634 | |||
| XC2S200E-6FT256Q | AMD Xilinx | Field Programmable Gate Array, 357MHz, 5292-Cell, CMOS, PBGA256 RoHS : Not Compliant | 1,397 | |||
 Waytek, Inc. | FHMS200 | Littelfuse Inc | Sealed Fuseholder w/ Cover Mini 12 AWG GXL Wire 30A 32VDC 8"Tinned Dipped Wire Leads |
| 326 | |
| S2002 | Eaton Electronics | Sure Power S2002 Multi Battery Isolator 200A 1 Input 2 Out |
| 23 | ||
 Win Source Electronics | IRS2001STRPBF | Infineon Technologies AG | Driver 200V 0.6A 2-OUT High and Low Side Non-Inv 8-Pin SOIC N T/R / IC DRIVER HI/LO SIDE 200V 8-SOIC RoHS : Compliant |
| 307,580 | |
| IRS2007STRPBF | Infineon Technologies AG | HVIC RoHS : Compliant |
| 47,440 | ||
| NCS20072DR2G | onsemi | IC OPAMP 3MHZ RRO DUAL 8SOIC RoHS : Compliant |
| 20,180 | ||
| SF-1206S200-2 | Bourns Inc | FUSE BOARD MOUNT 2A 63VDC 1206 RoHS : Compliant |
| 14,056 | ||
| IRS2005SPBF | Infineon Technologies AG | IC GATE DRVR HALF-BRIDGE 8SOIC / Half-Bridge Gate Driver IC Non-Inverting 8-SOIC RoHS : Compliant |
| 9,170 | ||
| IRLMS2002 | Infineon Technologies AG | MOSFET N-CH 20V 6.5A MICRO6 RoHS : Not Compliant |
| 7,400 | ||
| STPS200170TV1 | STMicroelectronics | High voltage power Schottky rectifier | DIODE MODULE 170V 100A ISOTOP RoHS : Compliant |
| 6,000 | ||
| AXK5S20047YG | Panasonic Electronic Components | CONN SOCKET BRD/BRD .5MM 20POS RoHS : Compliant |
| 2,149 | ||
DS2003TMT/NOPB | Texas Instruments | IC DARLINGTON DRIVER 16-SOIC RoHS : Compliant |
| 1,760 | ||
DS2003CMX | Texas Instruments | IC DRIVER 6/0 16SOIC RoHS : Not Compliant |
| 475 | ||
| XC3S2000-4FGG676C | AMD Xilinx | FPGA Spartan®-3 Family 2M Gates 46080 Cells 630MHz 90nm Technology 1.2V 676-Pin FBGA Tray / IC FPGA 489 I/O 676FBGA RoHS : Compliant |
| 425 | ||
| XC3S200-4VQG100I | AMD Xilinx | IC FPGA 63 I/O 100VQFP RoHS : Compliant |
| 344 | ||
| XC2S200-5PQ208I | AMD Xilinx | IC FPGA 140 I/O 208QFP / FPGA Spartan®-II Family 200K Gates 5292 Cells 263MHz 0.18um Technology 2.5V 208-Pin PQFP RoHS : Compliant |
| 270 | ||
| XC2S200E-6FGG456C | AMD Xilinx | IC FPGA 289 I/O 456FBGA RoHS : Compliant |
| 256 | ||
| XC2S200-6FGG456C | AMD Xilinx | IC FPGA 284 I/O 456FBGA RoHS : Compliant |
| 23 | ||
 Wuhan P&S | NCS20072DR2G | onsemi | Dual Op Amp,Rail-to-Rail Output,3MHz RoHS : Compliant |
| 245,000 | |
NCS2001SN1T1G | onsemi | 0.9V, Rail-to-Rail, Single Operational Amplifiers RoHS : Compliant |
| 33,000 | ||
| NVNJWS200N031LTAG | onsemi | 30V,3.3A,N-Channel Power MOSFET, RoHS : Compliant |
| 6,000 | ||
| NCS20061SQ3T2G | onsemi | 3 MHz, 125 A Low Power Operational Amplifier RoHS : Compliant |
| 3,000 |
| ALLDATASHEETはお客様のビジネスに役立ちますか？ [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Japanese ▼ 
English
Chinese
German
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand