 |
データシートサーチシステム |
|
|
データシートサーチシステム |
|
S48FDJ-R 販売店 |
| 販売店 | 部品番号 | メーカー | 部品情報 | Price | Qty. BuyNow | |
 Avnet Americas | FBMJ3216HS480NT | TAIYO YUDEN | - Tape and Reel (Alt: FBMJ3216HS480NT) RoHS : Compliant |
| 74,000 | |
| FBMJ3216HS480NTV | TAIYO YUDEN | - Tape and Reel (Alt: FBMJ3216HS480NTV) RoHS : Compliant |
| 54,000 | ||
| LTS-4812SKR-P | Lite-On Semiconductor Corporation | - Tape and Reel (Alt: LTS-4812SKR-P) RoHS : Compliant |
| 18,400 | ||
| SIT8008BI-13-YYS-48.000000E | SiTime Corporation | MEMS Oscillator, 48 MHz, PQFN, 2.5mm x 2mm, 50 ppm, 1.62V to 3.63V, SiT8008B Series - Tape and Reel (Alt: SIT8008BI-13-YYS-48.000000E) RoHS : Compliant |
| 6,000 | ||
| VS-48CTQ060S-M3 | Vishay Intertechnologies | Schottky Rectifier, 60 V, 40 A, Dual Common Cathode, TO-263AB, 3 Pins, 830 mV - Rail/Tube (Alt: VS-48CTQ060S-M3) RoHS : Compliant |
| 4,748 | ||
| MTSW-102-09-L-S-480 | Samtec Inc | Pin Header, Board-to-Board, 2.54 mm, 1 Rows, 2 Contacts, Through Hole, MTSW Series - Bulk (Alt: MTSW-102-09-L-S-480) RoHS : Compliant |
| 583 | ||
| SLB300S48C | Advanced Energy Industries Inc | - Bulk (Alt: SLB300S48C) RoHS : Compliant | 36 | |||
| LTS-4801JR | Lite-On Semiconductor Corporation | - Rail/Tube (Alt: LTS-4801JR) RoHS : Not Compliant |
| 20 | ||
| NGB800S48K | Advanced Energy Industries Inc | AC/DC Power Supply Single-OUT 48V 11.5A (Convection) 550W (Convection) Chassis Mount - Bulk (Alt: NGB800S48K) RoHS : Compliant | 20 | |||
| AMEOFL10-5S480LPZ | Aimtec | - Trays (Alt: AMEOFL10-5S480LPZ) RoHS : Compliant |
| 10 | ||
| AMEOFL10-24S480LPZ | Aimtec | - Trays (Alt: AMEOFL10-24S480LPZ) RoHS : Compliant |
| 10 | ||
| AMEOFL10-12S480LPZ | Aimtec | - Trays (Alt: AMEOFL10-12S480LPZ) RoHS : Compliant |
| 10 | ||
| AMEOFL10-9S480LPZ | Aimtec | AC/DC Open Frame Power Supply (PSU), ITE, Industrial & Household, 1 Output, 10 W, 85V to 528V - Trays (Alt: AMEOFL10-9S480LPZ) RoHS : Compliant |
| 10 | ||
| NGB660S48K | Advanced Energy Industries Inc | AC/DC Power Supply Single-OUT 48V 9.1A (Convection) 440W (Convection) Chassis Mount - Bulk (Alt: NGB660S48K) RoHS : Compliant | 7 | |||
| SLB125S48K | Advanced Energy Industries Inc | - Bulk (Alt: SLB125S48K) RoHS : Compliant |
| 4 | ||
 Newark | MTMM-101-12-T-S-481 | Samtec Inc | PIN HEADER, BOARD-TO-BOARD, 1 ROWS; RoHS : Compliant |
| 2,849 | |
| MTSW-103-09-T-S-480 | Samtec Inc | HDR, BRD-TO-BRD, 2.54MM, 3POS; RoHS : Compliant |
| 2,197 | ||
| MTLW-103-22-L-S-480 | Samtec Inc | HDR, BRD-TO-BRD, 2.54MM, 3POS; RoHS : Compliant |
| 1,261 | ||
| MTSW-108-09-T-S-480 | Samtec Inc | HDR, BRD-TO-BRD, 2.54MM, 8POS; RoHS : Compliant |
| 1,041 | ||
ABLS-48.000MHZ-B2-T | Abracon Corporation | MICROPROCESSOR CRYSTAL, 48MHZ; RoHS : Compliant |
| 828 | ||
| ABLS-48.000MHZ-B2-T | Abracon Corporation | MICROPROCESSOR CRYSTAL, 48MHZ; RoHS : Compliant |
| 828 | ||
| MTSW-116-09-T-S-480 | Samtec Inc | HDR, BRD-TO-BRD, 2.54MM, 16POS; RoHS : Compliant |
| 533 | ||
| MTSW-150-09-G-S-488 | Samtec Inc | HDR, BRD-TO-BRD, 2.54MM, 50POS; RoHS : Compliant |
| 350 | ||
| MP60S-4801250 | SPC Multicomp | POWER SUPPLY, AC-DC, 48V, 1.25A; RoHS : Compliant |
| 246 | ||
| ECS100US48 | XP Power | AC/DC Open Frame Power Supply, Medical,; RoHS : Compliant |
| 222 | ||
| DW-12-11-S-S-485 | Samtec Inc | CONN STACK BRD, 2.54MM, 12POS, HDR; RoHS : Compliant |
| 194 | ||
S48 | NKK Switches | SWITCH, TOGGLE, 4PDT, 20A, 250VAC; Switch Operation:(On)-Off-(On); Contact Configuration:4PDT; Illumination:Non Illuminated; Product Range:S Series; Switch Mounting:Panel Mount; Contact Current Max:20A; Contact Voltage AC Nom:250V RoHS Compliant: Yes RoHS : Compliant |
| 27 | ||
| AMEOFL5-5S480HANZ | Aimtec | POWER SUPPLY, AC-DC, 5V, 1A; Power Supply Applications:ITE & Household; No. of Outputs:1 Output; Power Rating (Forced Cooling):-; Power Rating (Convection Cooling):5W; Input Voltage VAC:90V AC to 528V AC; Output Voltage - Output 1:5VRoHS Compliant: Yes RoHS : Compliant |
| 13 | ||
| AME30-3S480JZ | Aimtec | POWER SUPPLY, AC-DC, 3.3V, 6A; Power Supply Applications:ITE; No. of Outputs:1 Output; Output Power Max:19.8W; Output Voltage - Output 1:3.3V; Output Current - Output 1:6A; Output Voltage - Output 2:-; Output Current - Output 2:- RoHS Compliant: Yes RoHS : Compliant |
| 5 | ||
| HPF3K0PS48 | XP Power | POWER SUPPLY, AC-DC, 48V, 62.5A; Power Supply Applications:ITE, Industrial & Medical; No. of Outputs:1Outputs; Output Power Max:3kW; Output Voltage - Output 1:48VDC; Output Current - Output 1:62.5A; Output Voltage - Output 2:- RoHS Compliant: Yes RoHS : Compliant |
| 2 | ||
 Analog Devices Inc | MAX6394US480D1/V+T | Analog Devices Inc | High-Accuracy Microprocessor R RoHS : Compliant |
| 57,500 | |
| MAX6394US480D3+T | Analog Devices Inc | High-Accuracy µP Reset Circuit RoHS : Compliant | 22,500 | |||
| MAX6394US480D3+ | Analog Devices Inc | High-Accuracy µP Reset Circuit RoHS : Compliant | 1,963 | |||
| MAX6394US480D1/V+ | Analog Devices Inc | High-Accuracy Microprocessor R RoHS : Compliant | 364 | |||
| EVAL-RS485FD8EBZ | Analog Devices Inc | Full-duplex (8-lead SOIC) Stan |
| 117 | ||
| EVAL-2LCANRS485EBZ | Analog Devices Inc | Evaluation Board RoHS : Compliant |
| 59 | ||
| EVAL-RS485FDEBZ | Analog Devices Inc | Full-duplex (14-lead SOIC) Sta |
| 50 | ||
| EVAL-RS485HDEBZ | Analog Devices Inc | Half-duplex Standard RS-485 |
| 26 | ||
| DS4830AEVKIT# | Analog Devices Inc | Evaluation Kit for DS4830A - L | 16 | |||
| MAXREFDES48# | Analog Devices Inc | 24V to 12V 40W power supply, s |
| 15 | ||
| MAX6394US480D3/V+ | Analog Devices Inc | High-Accuracy Microprocessor R RoHS : Compliant | 0 | |||
| MAX6394US480D3/V+T | Analog Devices Inc | High-Accuracy uP Reset Circuit RoHS : Compliant |
| 0 | ||
| MAX6421XS48+ | Analog Devices Inc | Low-Power, SC70/SOT µP Reset C RoHS : Compliant | 0 | |||
| DS4830AT+T | Analog Devices Inc | ADVANCED OPTICAL UC TRL VERSIO RoHS : Compliant |
| 0 | ||
| MAX6421XS48+T | Analog Devices Inc | Low-Power, SC70/SOT µP Reset C RoHS : Compliant |
| 0 | ||
 RS | AKM65US48C2 | XP Power | POWER SUPPLY AC-DC DESKTOP MEDICAL&ITE 65W 48V@1.35A 90-264V INPUT RoHS : Compliant |
| 38 | |
| SS-4856-40 (SS485640) | Isostatic Industries Inc | SLEEVE BEARING, SS-4856-40 1.504 X 1.754 X 2-1/2IN, POWDERED METAL BRONZE |
| 32 | ||
| LCW25US48 | XP Power | POWER SUPPLY, AC-DC, ENCLOSED, INDUSTRIAL, 25W, 48V, LCW25 SERIES RoHS : Compliant |
| 15 | ||
| SS-4856-12 (SS485612) | Isostatic Industries Inc | SLEEVE BEARING, SS-4856-12 1.504 X 1.754 X 3/4IN, POWDERED METAL BRONZE |
| 14 | ||
| LCW150PS48 | XP Power | POWER SUPPLY, AC-DC, ENCLOSED, INDUSTRIAL, 150W, 48V, LCW150 SERIES RoHS : Compliant |
| 10 | ||
| S8VK-S48024 (S8VKS48024) | OMRON Industrial Automation | 480W 24VDC 20A PUSH IN TERMINALS |
| 8 | ||
| DRC100US48 | XP Power | POWER SUPPLY, AC-DC, DIN RAIL, 100W, 48V, 2.1A, 85-264V IN, DRC100 SERIES RoHS : Compliant |
| 7 | ||
| S48907 | Square D by Schneider Electric | 7 PIN TEST CABLE FOR TEST KIT |
| 4 | ||
VFT150PS48 | XP Power | POWER SUPPLY AC-DC PANEL MOUNT OPEN FRAME 150W 48V@3.13A 90-264V INPUT RoHS : Compliant |
| 4 | ||
| BI5U-Q08-AP6X2-0.6-RS4/S480-S481 (1608924) | TURCK Inc | PROXIMITY SENSOR, UPROX, 5MM SENSING DISTANCENO, PNP, FLUSH MOUNT |
| 4 | ||
| VCE03US48 | XP Power | AC-DC POWER SUPPLY, ENCAPSULATED 3W 48V @ 63MA 85-305V, PCB, VCE03 SERIES RoHS : Compliant |
| 3 | ||
| VES220PS48 | XP Power | POWER SUPPLY, AC-DC, EXTERNAL, DESKTOP, 220W, 48V@4.58A, 90-264V IN RoHS : Compliant |
| 3 | ||
| AKM45US48 | XP Power | POWER SUPPLY AC-DC ADAPTER MEDICAL &ITE 45W 48V@1A 90-264V IN RoHS : Compliant |
| 2 | ||
| S8VS-48024A (S8VS48024A) | OMRON Industrial Automation | AC-DC POWER SUPPLY, 24V, 20A, 85-264V, ENCLOSED, PANEL, 480W, S8VS SERIES |
| 1 | ||
| S48 | NKK Switches | SWITCH, TOGGLE,4PDT,(ON)-OFF-(ON),NON-ILLUM,17.50MM ACTUATOR,15A,125VAC, SOLDER RoHS : Compliant |
| 0 | ||
 STMicroelectronics | TDA75610S-48X | STMicroelectronics | 4 x 45 W differential power amplifier with full I2C diagnostics, high efficiency and low voltage operation RoHS : Compliant |
| 4,198 | |
TS482IST | STMicroelectronics | 100mW stereo headphone amplifier RoHS : Compliant |
| 3,214 | ||
| TS4890IST | STMicroelectronics | 1W mono audio amplifier with standby active low RoHS : Compliant |
| 610 | ||
| TS482IDT | STMicroelectronics | 100mW stereo headphone amplifier RoHS : Compliant |
| 41 | ||
| TS4890IDT | STMicroelectronics | 1W mono audio amplifier with standby active low RoHS : Compliant |
| 28 | ||
| TS4871ID | STMicroelectronics | 1 W mono audio amplifier with standby active high RoHS : Compliant |
| 22 | ||
| TS4871IDT | STMicroelectronics | 1 W mono audio amplifier with standby active high RoHS : Compliant |
| 0 | ||
| TS4871IST | STMicroelectronics | 1 W mono audio amplifier with standby active high RoHS : Compliant |
| 0 | ||
 Microchip Technology Inc | ATRS485-XPRO | Microchip Technology Inc | RS-485 Xplained Pro, Projected EOL: |
| 15 | |
| EPS48 | Microchip Technology Inc | Uni-Directional TVS _ A-Body, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| TFS48B | Microchip Technology Inc | TFS48B, Projected EOL: 2050-07-31 - Contact for Pricing RoHS : Compliant | 0 | |||
| LDTS48 | Microchip Technology Inc | Uni-Directional TVS _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| TFS482 | Microchip Technology Inc | TFS482, Projected EOL: 2050-07-31 - Contact for Pricing RoHS : Compliant | 0 | |||
| TFS480D | Microchip Technology Inc | TFS480D, Projected EOL: 2050-07-31 - Contact for Pricing RoHS : Compliant | 0 | |||
| LDTS48A | Microchip Technology Inc | Uni-Directional TVS _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| TFS480C | Microchip Technology Inc | TFS480C, Projected EOL: 2050-07-31 - Contact for Pricing | 0 | |||
| TFS482D | Microchip Technology Inc | TFS482D, Projected EOL: 2050-07-31 - Contact for Pricing | 0 | |||
| TFS482B | Microchip Technology Inc | TFS482B, Projected EOL: 2050-07-31 - Contact for Pricing | 0 | |||
| TFS482E | Microchip Technology Inc | TFS482E, Projected EOL: 2050-07-31 - Contact for Pricing | 0 | |||
| EPS48SM | Microchip Technology Inc | Uni-Directional TVS _ A-Body Sq. Melf, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| EPS48HR2 | Microchip Technology Inc | Uni-Directional TVS _ A-Body, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| SM2S-484FG-MSSOC | Microchip Technology Inc | G4 MDL 484 PIN - FSM2S484FGMSSOC, Projected EOL: |
| 0 | ||
 Bisco Industries | 1-MS-4-8 | SOCKET SCREWS | 200 | |||
| SS48151-K1110 | MISCELLANEOUS | 193 | ||||
| 4574-632-SS-48 | RAF Electronic Hardware | 119 | ||||
| PSETS4-8 | Misumi Group Inc | 100 | ||||
| 140-009D33S48 | Moeller Manufacturing & Supply | 88 | ||||
| SRS-4-850 | Bivar Inc | RoHS : Compliant | 78 | |||
| 4623T-1032-SS-48 | RAF Electronic Hardware | 56 | ||||
| 0163-SS-48 | RAF Electronic Hardware | 40 | ||||
| AS4824C04 | AS SEALS | 22 | ||||
| SS-48039-1032-20 | Globe Electronic Hardware Inc | 21 | ||||
| AS4824C06 | AS SEALS | 13 | ||||
| AS4863J03 | Allan Aircraft Supply Co LLC | 6 | ||||
| NAS487-16 | NAS Nuts | 5 | ||||
| 8139-832-SS-48 | RAF Electronic Hardware | 5 | ||||
| AS4861J02 | Allan Aircraft Supply Co LLC | 5 | ||||
 Rochester Electronics | PTVS48VP1UTP,115 | Nexperia | TVS Diode Zener Uni-Directional 48V (Max) 77.4V SOD-128 T/R RoHS : Compliant |
| 4,150 | |
NTMFS4835NT1G | onsemi | Single N-Channel Power MOSFET 30V, 104A, 3.5mΩ RoHS : Compliant |
| 779,741 | ||
| NTMFS4847NAT1G | onsemi | Single N-Channel Power MOSFET 30V, 85A, 4.1mΩ RoHS : Compliant |
| 164,500 | ||
NTMFS4823NT1G | onsemi | Single N-Channel Power MOSFET 30V, 30A, 10.5mΩ RoHS : Compliant |
| 131,000 | ||
| NTMFS4834NT1G | onsemi | Single N-Channel Power MOSFET 30V, 130A, 3mΩ RoHS : Not Compliant |
| 492 | ||
| FDS4897AC | onsemi | Dual N & P-Channel PowerTrench® MOSFET 40V RoHS : Compliant |
| 319,800 | ||
| CY8C4245PVS-482 | Infineon Technologies AG | PSoC 4: PSoC 4200 RoHS : Compliant | 2,250 | |||
ITS4880RCUMA1 | Infineon Technologies AG | Buffer/Inverter Based Peripheral Driver, 0.2A, PDSO36 RoHS : Compliant |
| 4 | ||
| DS4834T-H00+ | Analog Devices Inc | Optical Microcontroller | 3,609 | |||
| MAX6394US480D3/V+ | Analog Devices Inc | High-Accuracy Microprocessor Reset Circu RoHS : Compliant | 530 | |||
| MICRF022YM-FS48 | Micrel Inc | Consumer Circuit, PDSO8 RoHS : Compliant |
| 5,000 | ||
| 54LS48J/B | Rochester Electronics LLC | IC Decoder 1 Element 1 x 4:7 MUX/DEMUX 4.5V - 5.5V 16-DIP Tube RoHS : Not Compliant |
| 1,693 | ||
SIT1602BC-13-33S-48.000000G | SiTime Corporation | CRYSTAL OSC XO (Standard) HCMOS, LVCMOS 48MHz 2.97V ~ 3.63V ±50ppm 4-SMD T/R RoHS : Compliant |
| 288 | ||
| KB DMLN31.13-7C8D-46-S484-65-S | ams OSRAM Group | KB DMLN31.13 - SYNIOS P2720, Blue LED RoHS : Compliant |
| 148,000 | ||
| KW DMLN31.EC-Z5GF9-4R9T-S484-65-S | ams OSRAM Group | KW DMLN31.EC - SYNIOS P2720, White LED |
| 0 | ||
 Sager | MTSW-103-09-T-S-480 | Samtec Inc | Headers & Wire Housings Variable Height PCB Header Strips, 0.100 pitch RoHS : Compliant |
| 2,197 | |
| MTLW-103-22-L-S-480 | Samtec Inc | Headers & Wire Housings .100 Low Profile Variable Post Height Terminal Strip RoHS : Compliant |
| 1,261 | ||
| MTSW-116-09-T-S-480 | Samtec Inc | Headers & Wire Housings Variable Height PCB Header Strips, 0.100 pitch RoHS : Compliant |
| 533 | ||
| MTSW-150-09-G-S-488 | Samtec Inc | Headers & Wire Housings Variable Height PCB Header Strips, 0.100 pitch RoHS : Compliant |
| 350 | ||
| MCSS4890AM | Crydom Inc | Solid State Relays - Industrial Mount PM Soft-Start/Stop SSR, 0-5V In RoHS : Compliant | 0 | |||
| ZW-04-10-L-S-485-090 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-39-06-F-S-480-090 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TX2SS-48V-W | Panasonic Electronic Components | Low Signal Relays - PCB TX Relay |
| 0 | ||
| MTSW-108-09-T-S-485 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTSW-116-09-L-S-484 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTMM-104-10-S-S-480 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTMM-105-10-L-S-484 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTMS-116-58-G-S-485 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-06-04-SM-S-487-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-09-06-F-S-488-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
 Coilcraft Direct | 0805CS-481XGEC | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 0 | |
| 0805CS-481XJLC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS RoHS : Compliant |
| 0 | ||
| 0805CS-481XGLC | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS RoHS : Compliant |
| 0 | ||
| 0805CS-481XJEC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 0 | ||
| 0805CS-480XJEC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 0 | ||
 TME | GB40S48P01 | Advanced Energy Industries Inc | Power supply: switching; AC/DC,open; 40W; 90÷264VAC; OUT: 1; 830mA RoHS : Compliant |
| 180 | |
| AME30-48S480JZ-B | Aimtec | Converter: AC/DC; 30W; Uin: 176÷528VAC,248÷746VDC; Uout: 48VDC |
| 20 | ||
| RS-H0-06 BZ M12 MS 4800KBPS | Drexia | RFID reader; 12V; FeliCa,iClass; RS232; Range: 40mm; 36x2x26.7mm |
| 7 | ||
| AKM65US48C2 | XP Power | Power supply: switching; 48VDC; 1.35A; Out: 5,5/2,5; 65W; 80÷264VAC RoHS : Compliant |
| 2 | ||
| S48 | NKK Switches | Switch: toggle; Pos: 3; 4P3T; (ON)-OFF-(ON); 6A/250VAC; 20A/30VDC RoHS : Compliant |
| 0 | ||
| VFT150PS48 | XP Power | Power supply: switching; open; 150W; 90÷264VAC; OUT: 1; 48VDC; 2.1A RoHS : Compliant |
| 0 | ||
| HPF3K0PS48 | XP Power | Power supply: switching; for building in; 3000W; 48VDC; 62.5A RoHS : Compliant |
| 0 | ||
RS-4815SZ/H3 | RECOM Power GmbH | Converter: DC/DC; 2W; Uin: 18÷72VDC; Uout: 15VDC; Iout: 134mA; SIP8 RoHS : Compliant |
| 0 | ||
| SHP1000PS48 | XP Power | Power supply: switching; for building in; 1000W; 48VDC; 25A; OUT: 1 RoHS : Compliant |
| 0 | ||
| CLC175US48 | XP Power | Power supply: switching; open; 175W; 120÷370VDC; 85÷264VAC; OUT: 1 RoHS : Compliant |
| 0 | ||
| CFM500S480C | Cincon Electronics Corporation | Power supply: switching; open; 500W; 80÷264VAC; OUT: 1; 48VDC; 94.5% RoHS : Compliant |
| 0 | ||
| CFM81S480-CA | Cincon Electronics Corporation | Power supply: switching; for building in,open; 80W; 120÷370VDC RoHS : Compliant |
| 0 | ||
| CHB300-300S48-CMFC | Cincon Electronics Corporation | Converter: DC/DC; 300W; Uin: 0.3kVDC; Uout: 48VDC; Iout: 6.25A; THT RoHS : Compliant |
| 0 | ||
| CHB350-48S48N | Cincon Electronics Corporation | Converter: DC/DC; 350.4W; Uin: 48VDC; Uout: 48VDC; Iin: 60mA; THT |
| 0 | ||
| EXTER HF RS-485 | Inveo | RFID reader; iClass,iCode,MIFARE; RS485; black; 13.56MHz |
| 0 | ||
 ComSIT USA | CAS480M12HM3 | Wolfspeed | AVAILABLE EU RoHS : Compliant | 2,925 | ||
| S48SP05007NKFB | Delta Electronics Inc | AVAILABLE EU | 143 | |||
ComSIT USA | B43793S487T2 | TDK Electronics | Electronic Component RoHS : Compliant | 108,504 | ||
| T491D106M025AS4818 | KEMET Corporation | TANTALUM CAPACITOR Tantalum Capacitor, Polarized, Tantalum (dry/solid), 25V, 20% +Tol, 20% -Tol, 10uF, Surface Mount, 2917 RoHS : Not Compliant | 19,050 | |||
| TDF8541SDN2S484 | NXP Semiconductors | I2C-BUS CONTROLLED 4 X 45 W POWER AMPLIFIER Audio Amplifier, 44W, 4 Channel(s), 1 Func, BCDMOS, PZFM27 RoHS : Compliant | 17,724 | |||
| DS485MXNOPB | Texas Instruments | LOW POWER RS-485/RS-422 MULTIPOINT TRANSCEIVER Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO8 RoHS : Compliant | 15,000 | |||
| SQS484ENT1GE3 | Vishay Intertechnologies | AUTOMOTIVE N-CHANNEL 40 V (D-S) 175 DEGREE CELSIUS MOSFET Power Field-Effect Transistor, 16A I(D), 40V, 0.013ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 7,612 | |||
| T495X156M035AS4818 | KEMET Corporation | CAP TANT Molded 15uF 35V �20% 2917 RoHS : Not Compliant | 4,460 | |||
| T494D336M016AS4814 | KEMET Corporation | TANTALUM CAPACITOR Tantalum Capacitor, Polarized, Tantalum (dry/solid), 16V, 20% +Tol, 20% -Tol, 33uF, Surface Mount, 2917 RoHS : Compliant | 3,250 | |||
| T356H476M010AS4828 | KEMET Corporation | TANTALUM THROUGH-HOLE CAPACITOR Tantalum Capacitor, Polarized, Tantalum (dry/solid), 10V, 20% +Tol, 20% -Tol, 47uF, Through Hole Mount RoHS : Not Compliant | 1,495 | |||
| LTS4801PBATF | Lite-On Semiconductor Corporation | Electronic Component RoHS : Compliant | 134 | |||
| XCR3064XL10CS48I | AMD Xilinx | 64 MACROCELL CPLD EE PLD, 10ns, 64-Cell, CMOS, PBGA48 RoHS : Not Compliant | 120 | |||
| Z93S4824PN | Aerovox Corporation | METALLIZED POLYPROPYLENE CAPACITOR Film Capacitor RoHS : Compliant | 50 | |||
| VRIS4848020A | Syko | Electronic Component RoHS : Not Compliant | 40 | |||
| DCS4808A | Delta Electronics Inc | Electronic Component RoHS : Not Compliant | 15 | |||
| XC9536XL7CS48I | AMD Xilinx | HIGH-PERFORMANCE CPLD Flash PLD, 7.5ns, 36-Cell, CMOS, PBGA48 RoHS : Not Compliant | 10 | |||
| S48SR05003ERB | Delta Electronics Inc | Analog Circuit RoHS : Not Compliant | 9 | |||
 GLYN GmbH & Co. KG | SE-CAB-RS485_CAN | ES+S | Smart Embedded RS485/CAN | 98 | ||
 Interstate Connecting Components | A85049144S48X103 | Amphenol PCD | M85049144S48X10-3 | 0 | ||
| M85049/109S48KW23-6 | Amphenol PCD | 38999 SI/II Backshell Pre-Shield |
| 0 | ||
| M85049/111S48KN23-6D | Amphenol PCD | 38999 SI/II Backshell Pre-Shield ENP |
| 0 | ||
| M85049/111S48KW24-6D | Amphenol PCD | 38999 SI/II Backshell Pre-Shield ENP |
| 0 | ||
| M85049/144S48N06-4 | Amphenol PCD | M85049144S48N06-4 | 0 | |||
| M85049/144S48N40-6 | Amphenol PCD | M85049144S48N40-6 | 0 | |||
| M85049/144S48W24-5 | Amphenol PCD | M85049144S48W24-5 | 0 | |||
| M85049/144S48Z12-5 | Amphenol PCD | M85049144S48Z12-5 | 0 | |||
| M85049/144S48Z40-4 | Amphenol PCD | M85049144S48Z40-4 | 0 | |||
| M85049/146S48N32 | Amphenol PCD | M85049146S48N32 | 0 | |||
| MS4820M | Amphenol Positronic | 0 | ||||
| SP5S48M0LN0A1/AA | Amphenol Positronic | RoHS : Compliant | 0 | |||
| 107-224S48CJ-6 | Glenair Inc | 0 | ||||
| HS4800-122 | TE Connectivity | 0 | ||||
| HS4810800000G | Amphenol Anytek | HS 7.5 412P GREY SOLDER PINS | 0 | |||
 NexGen Digital | IS486E | Sharp Microelectronics of the Americas | 3,940 | |||
| PTVS48VS1UR | NXP Semiconductors | RoHS : Compliant | 1,824 | |||
XC9572XL-10CS48C | AMD Xilinx | RoHS : Not Compliant | 11 | |||
| DS485MX/NOPB | Texas Instruments | RoHS : Compliant | 7 | |||
 PEI Genesis | M85049/109S48KW23-6 | Amphenol PCD |
| 0 | ||
| M85049/111S48KN23-6D | Amphenol PCD |
| 0 | |||
| M85049/111S48KW24-6D | Amphenol PCD |
| 0 | |||
| M85049/144S48N06-4 | Amphenol PCD |
| 0 | |||
| M85049/144S48N40-6 | Amphenol PCD |
| 0 | |||
| M85049/144S48W24-5 | Amphenol PCD |
| 0 | |||
| M85049/144S48Z12-5 | Amphenol PCD |
| 0 | |||
| M85049/144S48Z40-4 | Amphenol PCD |
| 0 | |||
| M85049/146S48N32 | Amphenol PCD |
| 0 | |||
| S4802-14-34 | SOURIAU-SUNBANK |
| 0 | |||
| S4832F1010-09-34-2 | SOURIAU-SUNBANK |
| 0 | |||
| S4841R14-5.004-3 | SOURIAU-SUNBANK |
| 0 | |||
| S4871C4032S6-12S | SOURIAU-SUNBANK |
| 0 | |||
| BGN-S48G | Microsemi Storage OTN and Networking Solutions (now Microchip) |
| 0 | |||
| S4800-08040404L34 | SOURIAU-SUNBANK |
| 0 | |||
 Powell Electronics | MTMM-101-12-T-S-481 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 1,880 | |
| MTSW-103-09-T-S-480 | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 1,450 | ||
| MTSW-106-09-T-S-480 | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 876 | ||
| MTLW-103-22-L-S-480 | Samtec Inc | .100" Low Profile Variable Post Height T RoHS : Compliant |
| 832 | ||
| HW-02-10-L-S-480-SM | Samtec Inc | Cable Assembly, Wire-to-Board, High-Prof RoHS : Compliant |
| 767 | ||
| MTSW-108-09-T-S-480 | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 687 | ||
| HW-04-09-T-S-484-SM | Samtec Inc | High Temperature Flexible Board Stacking RoHS : Compliant |
| 435 | ||
| MTSW-116-09-T-S-480 | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 352 | ||
| HMTMS-108-58-G-S-485 | Samtec Inc | .050" x .100" High-Temp Variable Post He RoHS : Compliant |
| 253 | ||
| MTSW-150-09-G-S-488 | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 231 | ||
| MTSW-150-09-L-S-485 | Samtec Inc | Connector Header RoHS : Compliant |
| 231 | ||
| TTMS-4.8-3 | TE Connectivity | Connectors |
| 198 | ||
| DW-12-11-S-S-485 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 128 | ||
| S48 | NKK Switches | MEDIUM CAPACITY STANDARD SIZE TOGGLE RoHS : Compliant |
| 49 | ||
| 280-057S4-8P8MEPA | Glenair Inc | HIPER-D - RECTANGULAR CONN RoHS : Compliant |
| 1 | ||
 PUI | 9111-4MS48AFS101C7PU-A001 | 5,000 | ||||
| 9B1TS48P0G001 | Sanyo-Denki Co Ltd | RoHS : Compliant |
| 50 | ||
 Richardson RFPD | THAS482M040AD0C | Knowles CDE | Cap Aluminum Lytic 4800uF 40V 20% (25.2 X 9 X 66.5 RoHS : Compliant |
| 0 | |
| RS-4815SZ/H3 | RECOM Power GmbH | Module DC-DC 48VIN 1-OUT 15V 0.134A 2W Medical 7-P RoHS : Compliant |
| 0 | ||
| DCHBW100-48S48TF | Wall Industries Inc | DCTODC CONVERTR MOD | 0 | |||
| DCQA150-48S48 | Wall Industries Inc | 144 Watts, Quarter-Brick DC/DCConverters RoHS : Compliant | 0 | |||
| CAS480M12HM3T | Wolfspeed | SiC, Module, 480A, 1200V, 62mm, HM3, Half-Bridge, RoHS : Compliant |
| 0 | ||
| DCHBW150-110S48 | Wall Industries Inc | 182.4 Watts Half-Brick DC/DCConverter Single Outpu RoHS : Compliant | 0 | |||
| DCHBW150-24S48 | Wall Industries Inc | DCTODC CONVERTR MOD RoHS : Compliant | 0 | |||
| CMSP24S48-100 | Wall Industries Inc | 50, 66, 75, and 100 Watts Rev. A Half Brick, Singl | 0 | |||
| Z93S4848PN | Knowles CDE | OIL FILLED CAPACITOR RoHS : Compliant | 0 | |||
| DCHBW100-110S48TF | Wall Industries Inc | DCTODC CONVERTR MOD | 0 | |||
| RS-4815S/H3 | RECOM Power GmbH | Module DC-DC 48VIN 1-OUT 15V 0.134A 2W Medical 7-P RoHS : Compliant |
| 0 | ||
| RTX-2016AD333-S-48.000.TR | Raltron Electronics Corporation | OSC TCXO/VCTCXO RoHS : Compliant | 0 | |||
| CCT-38S480 | Teledyne Relays | RF COAXIAL SWITCH RoHS : Compliant |
| 0 | ||
| Z93S4824PN | Knowles CDE | High Intensity Discharge Film Capacitors RoHS : Compliant |
| 0 | ||
| PSTAD100US-48DN | Wall Industries Inc | Up to 100 Watts AC/DC Power Supply Single Output RoHS : Compliant | 0 | |||
 Rutronik | ITS4880RCUMA1 | Infineon Technologies AG | 8xHSS 200mOhm 45V PowerSO36 SMD RoHS : Compliant |
| 4,800 | |
| SQS488CENW-T1_GE3 | Vishay Intertechnologies | DUAL N-CH 40V 16A 6.4mOhm PPAK 1212-8W RoHS : Compliant |
| 3,000 | ||
 Chip 1 Exchange | US4881LUC-AAA-100-WB | Melexis Microelectronic Integrated Systems | INSTOCK | 343,924 | ||
| MAX6394US480D1/V+T | MAXAD | INSTOCK | 23,697 | |||
| SIT1602BC-13-XXS-48.000000 | SiTime Corporation | INSTOCK RoHS : Compliant | 4,783 | |||
| BFS 483 H6327 | INSTOCK | 3,777 | ||||
| T491D686M010AS4820R087 | KEMET Corporation | INSTOCK | 2,500 | |||
| NTMFS4834NT1G | onsemi | INSTOCK RoHS : Compliant | 1,885 | |||
| TTMS-4.8-1 | TE Connectivity | INSTOCK | 1,781 | |||
| T496D206M020AS4822 | INSTOCK | 1,281 | ||||
| 101S48W105KV4E | INSTOCK | 786 | ||||
| IS489 | INSTOCK | 240 | ||||
| 1005S48HN | INSTOCK | 110 | ||||
| 1005S48HNR | INSTOCK | 100 | ||||
| LTS-4801E | INSTOCK | 32 | ||||
| LTS-4801HG-02 | INSTOCK | 15 | ||||
| XCF16PFS48C | AMD Xilinx | INSTOCK RoHS : Not Compliant | 2 | |||
 Avnet Abacus | FBMJ3216HS480NT | TAIYO YUDEN | (Alt: CGHMK107C7224KA8TE) RoHS : Compliant | 114,000 | ||
| AKM90PS48 | XP Power | ACDC Power Supply ITE Medical 1 Output 90 W 48 VDC 188 A (Alt: AKM90PS48) RoHS : Compliant | 26 | |||
| AQM250PS48 | XP Power | (Alt: AQM250PS48) RoHS : Compliant | 3 | |||
| NDTS4805C | Murata Manufacturing Co Ltd | Module DCDC 1OUT 5V 06A 3W 8Pin DIP (Alt: NDTS4805C) RoHS : Compliant | 0 | |||
| VCE03US48 | XP Power | ACDC 3W PCB MOUNT ENCAPSULATED (Alt: VCE03US48) RoHS : Compliant | 0 | |||
| HPF3K0PS48 | XP Power | ACDC Enclosed Power Supply PSU ITE Industrial Medical 1 Outputs 3 kW 48 VDC 625 A (Alt: HPF3K0PS48) RoHS : Compliant | 0 | |||
| GB40S48P01 | Advanced Energy Industries Inc | (Alt: GB40S48P01) RoHS : Compliant | 0 | |||
| ECS100US48 | XP Power | ACDC Open Frame Power Supply PSU ITE Medical 1 Output 100W 10CFM 80 W (Alt: ECS100US48) RoHS : Compliant | 0 | |||
| AKM65US48C2 | XP Power | XP Power ACDC External PSU 65W Level VI ITE Medical (Alt: AKM65US48C2) RoHS : Compliant | 0 | |||
| SHP1000PS48 | XP Power | PSU 1000W INDUSTRIAL (Alt: SHP1000PS48) RoHS : Compliant | 0 | |||
EML30US48-T | XP Power | ACDC Open Frame Power Supply PSU Medical 1 Output 30 W 85V AC to 264V AC (Alt: EML30US48-T) RoHS : Compliant | 0 | |||
| HS4810800000G | Amphenol Corporation | (Alt: HS4810800000G) RoHS : Compliant | 0 | |||
| NPIS48LS220MTRF | NIC Components Corp | Power Inductor SMD 22 uH 20 590 mA Shielded 800 mA 4mm x 4mm x 18mm - Tape and Reel (Alt: NPIS48LS220MTRF) RoHS : Compliant | 0 | |||
| AME30-48S480JZ-B | Aimtec | ACDC PCB Mount Power Supply PSU Household Industrial ITE Transformer Fixed 1 Output 30 W (Alt: AME30-48S480JZ-B) RoHS : Compliant | 0 | |||
| ABLS-48.000MHZ-B2-T | Abracon Corporation | Crystal Standard 48 MHz SMD 115mm x 47mm x 42mm 50 ppm 18 pF 20 ppm ABLS - Tape and Reel (Alt: ABLS-48.000MHZ-B2-T) RoHS : Compliant | 0 | |||
Avnet Asia | SQS484ENW-T1_GE3 | Vishay Intertechnologies | (Alt: SQS484ENW-T1_GE3) RoHS : Compliant | 0 | ||
| MURS480ET3G | onsemi | (Alt: MURS480ET3G) RoHS : Compliant | 0 | |||
| ECS-480-7-33B2-CKM-TR3 | ECS International Inc | (Alt: ECS-480-7-33B2-CKM-TR3) RoHS : Compliant | 0 | |||
| NPIS48LP2R2MTRF | NIC Components Corp | (Alt: NPIS48LP2R2MTRF) RoHS : Compliant | 0 | |||
| FBMJ3216HS480NT | TAIYO YUDEN | (Alt: FBMJ3216HS480NT) RoHS : Compliant | 0 | |||
| PTVS48VP1UP,115 | Nexperia | TVS Diode, PTVSxP1UP Series, Unidirectional, 48 V, 77.4 V, CFP5 (SOD-128), 2 Pins (Alt: PTVS48VP1UP,115) RoHS : Compliant | 0 | |||
| ECS-480-8-33B-CWN-TR | ECS International Inc | (Alt: ECS-480-8-33B-CWN-TR) RoHS : Compliant |
| 0 | ||
| SQS484CENW-T1_GE3 | Vishay Intertechnologies | Transistor MOSFET N-CH 40V 16A 8-Pin PowerPAK 1212 (Alt: SQS484CENW-T1_GE3) RoHS : Compliant | 0 | |||
| ECS-480-8-36-RWN-TR | ECS International Inc | Crystal, Standard, 48 MHz, SMD, 2.5mm x 2mm x 0.55mm, 15 ppm, 8 pF, 15 ppm, ECX-2236 (Alt: ECS-480-8-36-RWN-TR) RoHS : Compliant | 0 | |||
| TS480GSSD910T-FLP | Transcend Information Inc | (Alt: TS480GSSD910T-FLP) RoHS : Compliant | 0 | |||
 Avnet Silica | IS485E | Sharp Microelectronics of the Americas | Photodetector Optoschmitt 3Pin (Alt: IS485E) RoHS : Compliant | 20,000 | ||
| TS482IST | STMicroelectronics | Audio Amp Headphone 2CH Stereo 0107W ClassAB 8Pin MSOP TR (Alt: TS482IST) RoHS : Compliant | 12,000 | |||
| PTVS48VP1UP,115 | Nexperia | TVS Diode PTVSxP1UP Series Unidirectional 48 V 774 V CFP5 SOD128 2 Pins (Alt: PTVS48VP1UP,115) RoHS : Compliant | 6,000 | |||
CS48540-DQZ | Cirrus Logic | DSP FixedPoint 32Bit 150MHz 150MIPS 48Pin LQFP (Alt: CS48540-DQZ) RoHS : Compliant | 0 | |||
| MURS480ET3G | onsemi | 800 V 40 A Ultrafast Rectifier (Alt: MURS480ET3G) RoHS : Compliant | 0 | |||
| CS48L32-CNZR | Cirrus Logic | (Alt: CS48L32-CNZR) RoHS : Compliant | 0 | |||
| CS48L10-CNZR | Cirrus Logic | DSP FixedPoint 32Bit 120MHz 24Pin QFN TR (Alt: CS48L10-CNZR) RoHS : Compliant | 0 | |||
| CS48540-DQZR | Cirrus Logic | DSP FixedPoint 32Bit 150MHz 150MIPS 48Pin LQFP TR (Alt: CS48540-DQZR) RoHS : Compliant | 0 | |||
| CS48L11-CNZR | Cirrus Logic | (Alt: CS48L11-CNZR) RoHS : Compliant | 0 | |||
| EV12DS480ACZPY | Teledyne HiRel | Digital to Analog Converter 1 Channel 12 bit Voltage Serial Microwire 475 V to 525 V (Alt: EV12DS480ACZPY) RoHS : Compliant | 0 | |||
| EV12DS480AMZPEQM | Teledyne HiRel | MUXDAC 12bits 8GSPS Mil Temp Burn In (Alt: EV12DS480AMZPEQM) RoHS : Not Compliant | 0 | |||
| PTVS48VP1UTP,115 | Nexperia | TVS Diode PTVS4 Unidirectional 48 V 774 V SOD128 2 Pins (Alt: PTVS48VP1UTP,115) RoHS : Compliant | 0 | |||
| SM2S-484FG-MSSOC | Microchip Technology Inc | SmartFusion2 and IGLOO2 Silicon Sculptor Adapter Modules (Alt: SM2S-484FG-MSSOC) RoHS : Compliant | 0 | |||
SIT1602BI-33-XXS-48.000000T | SiTime Corporation | Silicon Oscillator 48MHz 25V33V 15pF 4Pin QFN TR (Alt: SIT1602BI-33-XXS-48.000000T) RoHS : Compliant | 0 | |||
| LENS ALLIED VISION S-4.8-F2.2-1MP-T1- | Allied Vision Technologies GmbH | M12Mount 1MP type 14 f48mm F22 for IMX991 (Alt: 19622) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | CFM500S480C | Cincon Electronics Corporation | AC-DC AC-DC MODULES RoHS : Compliant |
| 0 | |
| CFM81S480-CA | Cincon Electronics Corporation | OPEN FRAME AC-DC MODULES RoHS : Compliant |
| 0 | ||
| CHB300-300S48-CMFC | Cincon Electronics Corporation | Isolated DC/DC Converters RoHS : Compliant |
| 0 | ||
| CHB350-48S48N | Cincon Electronics Corporation | BRICK DC-DC |
| 0 | ||
| AMMLPAAVRS-48.0000T | Abracon Corporation |
| 0 | |||
| AMMLPEAVRS-48.0000T | Abracon Corporation |
| 0 | |||
| ABLS-48.000MHZ-B2-T | Abracon Corporation | CRYSTAL 48.0000MHZ 18PF SMD RoHS : Compliant |
| 0 | ||
| CFM81S480 | Cincon Electronics Corporation | OPEN FRAME AC-DC MODULES RoHS : Compliant |
| 0 | ||
| CHB100-110S48 | Cincon Electronics Corporation | Railway DC-DC Converter RoHS : Compliant |
| 0 | ||
| CHB150W-48S48 | Cincon Electronics Corporation | Isolated DC/DC Converters RoHS : Compliant |
| 0 | ||
| CHB200W12-72S48-CMFD+HD | Cincon Electronics Corporation | Half Brick Chassis Mount Railway DC-DC Converter Module RoHS : Compliant |
| 0 | ||
| CHB75W-48S48-DIN | Cincon Electronics Corporation | DC-DC Converter Module RoHS : Compliant |
| 0 | ||
| CQB50W8-36S48-CMFD | Cincon Electronics Corporation | RAILWAY BRICK DC-DC RoHS : Compliant |
| 0 | ||
| AMEOFL10-5S480LPZ | Aimtec | RoHS : Compliant |
| 0 | ||
| AMMLPFLALRS-48.0000T | Abracon Corporation |
| 0 | |||
 Chip-Germany GmbH | MT29C4G48MAAGBBAKS-48 IT | Micron Technology Inc | 10,000 | |||
| MT29C4G48MAZBBAKS-48 IT | Micron Technology Inc |
| 500 | |||
 Component Electronics, Inc | T491A225K010AS4838 | KEMET Corporation | IN STOCK SHIP TODAY |
| 6,000 | |
| CFB200-48S48 | Cincon Electronics Corporation | IN STOCK SHIP TODAY |
| 286 | ||
| 3022S-4-881 | TOBY ELECTRO | IN STOCK SHIP TODAY | 202 | |||
| CGS482U075R3C | Knowles CDE | IN STOCK SHIP TODAY RoHS : Compliant |
| 90 | ||
BWS4805 | Bel Power Solutions | IN STOCK SHIP TODAY RoHS : Compliant |
| 87 | ||
| 74LS48PC | Fairchild Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant | 73 | |||
| DS485M/NOPB | Texas Instruments | IN STOCK SHIP TODAY RoHS : Compliant |
| 56 | ||
| DS485TM/NOPB | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 52 | ||
| BGN-S48G | ABB Low Voltage Products and Systems | IN STOCK SHIP TODAY |
| 40 | ||
| GS4882-CTA | Gennum Corporation | IN STOCK SHIP TODAY |
| 7 | ||
| 102S48W104KV4E | Johanson Dielectrics Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 6 | ||
| BM60-220S48-00 | Enargy Power Corporation | IN STOCK SHIP TODAY |
| 5 | ||
| DM74LS48N | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant | 2 | |||
| PAH150S48-28/V | TDK-Lambda Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 1 | ||
| DPS48T05 | Delta Electronics Inc | IN STOCK SHIP TODAY | 1 | |||
 DB Roberts | AKS4-8125-3.8B | AVK Industrial Products | AK INSERT M8 ST YZ 0,70-3,8 CL |
| 80 | |
| AEKS4-832-80B | PennEngineering (PEM) | 0 | ||||
| AFS48470A | Essentra Components | 48MM BASE 38-16 THREAD X 1.5 L | 0 | |||
| AFS48420A | Essentra Components | 48MM BASE 516-18 THREAD X 1.5 | 0 | |||
| M1653-A-2545-SS-48 | RAF Electronic Hardware | 0 | ||||
| BMS-S-48 | Essentra Components | CARD GUIDE,NO ADH,BLACK,4 FT L | 0 | |||
| AFS48520A | Essentra Components | 48MM BASE 12-13 THREAD X 1.5 L | 0 | |||
| 1219-25-SS-48 | RAF Electronic Hardware | 0 | ||||
| DLCBS4-8-01 | Essentra Components | CB SptDual LckNatural.740 in Spc CB Spt Dual Lck Natural | 0 | |||
| 2103-832-SS-48 | RAF Electronic Hardware | 0 | ||||
| AFS48550A | Essentra Components | 48MM BASE 12-13 THREAD X 4 LEN | 0 | |||
| HS-4-8 | Essentra Components | SpacerHex4 ST ScrGrey1 in Lg Spacer Hex 4 ST Screw Grey | 0 | |||
| MS 480 | SHEREX FASTENING SO | 0 | ||||
| M1653-B-2545-SS-48 | RAF Electronic Hardware | 0 | ||||
| SRS4-8-01 | Essentra Components | SpacerSlf Ret 4 ScrNat1/2 in Spc | 0 | |||
 EBV Elektronik | BTS4880RAUMA1 | Infineon Technologies AG | Smart Power Switch SIPMOS Technology High Side 8 Outputs 45V 14A SOIC36 (Alt: SP000276938) RoHS : Compliant | 10,400 | ||
| BFS483H6327XTSA1 | Infineon Technologies AG | Bipolar RF Transistor Dual NPN 12 V 8 GHz 450 mW 65 mA SOT363 (Alt: SP000750464) RoHS : Compliant | 9,000 | |||
| VS-48CTQ060-M3 | Vishay Intertechnologies | (Alt: VS-48CTQ060-M3) RoHS : Compliant | 4,650 | |||
| VS-48CTQ060STRL-M3 | Vishay Intertechnologies | (Alt: VS-48CTQ060STRL-M3) RoHS : Compliant | 4,000 | |||
| VS-48CTQ060S-M3 | Vishay Intertechnologies | Schottky Rectifier 60 V 40 A Dual Common Cathode TO263AB 3 Pins 830 mV (Alt: VS-48CTQ060S-M3) RoHS : Compliant | 1,250 | |||
| MURS480ET3G | onsemi | 800 V 40 A Ultrafast Rectifier (Alt: MURS480ET3G) RoHS : Compliant | 0 | |||
| ITS4880RCUMA1 | Infineon Technologies AG | Power Load Distribution Switch IC High Side 8 Channels 45 V 5 A 150 Milliohms 36 Pins DSO (Alt: SP000219527) RoHS : Compliant | 0 | |||
| SIS488DN-T1-GE3 | Vishay Intertechnologies | (Alt: SIS488DN-T1-GE3) RoHS : Compliant | 0 | |||
| SQS484EN-T1-GE3 | Vishay Intertechnologies | NCHANNEL 40V DS 175C MOSFET (Alt: SQS484EN-T1-GE3) RoHS : Compliant | 0 | |||
| SQS484ENW-T1_GE3 | Vishay Intertechnologies | (Alt: SQS484ENW-T1_GE3) RoHS : Compliant | 0 | |||
| SM2S-484FG-MSSOC | Microchip Technology Inc | SmartFusion2 and IGLOO2 Silicon Sculptor Adapter Modules (Alt: SM2S-484FG-MSSOC) RoHS : Compliant | 0 | |||
| SQS482ENW-T1-GE3 | Vishay Intertechnologies | NCHANNEL 30V DS 175C MOSFET (Alt: SQS482ENW-T1_GE3) RoHS : Compliant | 0 | |||
| SQS488CENW-T1_GE3 | Vishay Intertechnologies | Automotive NChannel 40 V DS 175 C MOSFET (Alt: SQS488CENW-T1_GE3) RoHS : Compliant | 0 | |||
| VS-48CTQ060STRR-M3 | Vishay Intertechnologies | (Alt: VS-48CTQ060STRR-M3) RoHS : Compliant | 0 | |||
| 74ALVC164245XTS48G/TR | SG Micro Corp | (Alt: 74ALVC164245XTS48G/TR) RoHS : Compliant | 0 | |||
 FDH Electronics | 280-057S4-8P8MEPA | Glenair Inc | Backshells & Ac RoHS : Compliant |
| 3 | |
| TMDE-50PS48GR | W L Gore & Associates | Cable Assembly |
| 3 | ||
| M85049/109S48KW23-6 | Amphenol PCD | Backshells & Ac |
| 0 | ||
| M85049/111S48KN23-6D | Amphenol PCD | Backshells & Ac |
| 0 | ||
| M85049/111S48KW24-6D | Amphenol PCD | Backshells & Ac |
| 0 | ||
| M85049/144S48N06-4 | Amphenol PCD | Backshells & Ac | 0 | |||
| M85049/144S48N40-6 | Amphenol PCD | Backshells & Ac | 0 | |||
| M85049/144S48W24-5 | Amphenol PCD | Backshells & Ac | 0 | |||
| M85049/144S48Z12-5 | Amphenol PCD | Backshells & Ac | 0 | |||
| M85049/144S48Z40-4 | Amphenol PCD | Backshells & Ac | 0 | |||
| M85049/146S48N32 | Amphenol PCD | Backshells & Ac | 0 | |||
| M85049/144S48N28-6 | Amphenol PCD | Backshells & Ac | 0 | |||
| M85049/144S48W03-4 | Amphenol PCD | Backshells & Ac | 0 | |||
| M85049/144S48W20-5 | Amphenol PCD | Backshells & Ac | 0 | |||
| M85049/144S48Z28-4 | Amphenol PCD | Backshells & Ac | 0 | |||
 Flip Electronics | NVTFS4824NTWG | onsemi | Stock, Ship Today RoHS : Compliant |
| 170,000 | |
| NVTFS4824NTAG | onsemi | Stock, Ship Today RoHS : Compliant |
| 22,500 | ||
9EPRS488CKLF | Integrated Device Technology Inc | Stock, Ship Today RoHS : Compliant |
| 12,226 | ||
| 9EPRS488CKLFTR | Integrated Device Technology Inc | Stock | 12,226 | |||
| 9EPRS488CKLFT | Integrated Device Technology Inc | Stock RoHS : Compliant | 12,226 | |||
| ICS9EPRS488CKLF | Integrated Device Technology Inc | Stock | 12,226 | |||
| NTTFS4821NTAG | onsemi | Stock, Ship Today RoHS : Compliant |
| 5,039 | ||
| NVTFS4823NWFTWG | onsemi | Stock, Ship Today RoHS : Compliant |
| 5,000 | ||
NTMS4807NR2G | onsemi | Stock, Ship Today RoHS : Compliant |
| 2,500 | ||
| NTMFS4823NT1G | onsemi | Stock, Ship Today RoHS : Compliant |
| 1,500 | ||
| NTMFS4834NT1G | onsemi | Stock, Ship Today RoHS : Compliant |
| 1,260 | ||
| CY8C4548AXI-S485 | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 890 | ||
| CY8C4548AZI-S483 | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 870 | ||
| CY8C4548AZQ-S483 | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 500 | ||
| NTMS4816NR2G | onsemi | Stock, Ship Today RoHS : Compliant |
| 1 | ||
 Maritex | WS48P4SMA-B | Cyg Wayon Circuit Protection Co Ltd | Transil Diode (TVS); 400W; 48V; 5.2A; bidirectional; -65+150 deg.C; SMD; DO214AC(SMA) |
| 3,400 | |
| BFS481H6327XTSA1 | Infineon Technologies AG | Bipolar Transistors (BJT); BFS481H6327XTSA1; INFINEON TECHNOLOGIES; NPN; 6; 12 V; 20 mA RoHS : Compliant |
| 789 | ||
| DRS-480-24 | Mean Well | Buffer Power Supply; DIN; 480W; 24V; 20A; 90-305VAC ; 127-431VDC RoHS : Compliant |
| 57 | ||
| DRS-480-48 | Mean Well | Buffer Power Supply; DIN; 480W; 48V; 10A; 90-305VAC ; 127-431VDC RoHS : Compliant |
| 17 | ||
| EPS-65S-48 | Mean Well | Power supply; 65.3W; 48V; 1.36A; 85-264VAC RoHS : Compliant |
| 9 | ||
| RQB40W12-110S48 | Mean Well | DC/DC rail inverter; 40W; 14-160V; 48V; 0.833A RoHS : Compliant |
| 7 | ||
| M1608SS-4-8 | BEISIT | Stainless Steel cable gland M16x1.5 4-8mm SS316L |
| 7 | ||
| RQB150W3-110S48 | Mean Well | DC/DC rail inverter; 150W; 60-160V; 48V; 3.125A RoHS : Compliant |
| 5 | ||
| EG-S48D24-L-V20W90 16W 6500K | NiViss | LED strip; Lens type 2-LED mono white; vertical bending; cool white 6500K; CRI min. 90; 24V; width 12mm; height: 6.2 mm; 16W/m; 48LED/m; IP20; cut every 41.7mm; red black cable / 5 meter reel |
| 2 | ||
| DRS-480-36CAN | Mean Well | Buffer Power Supply; DIN; 480W; 36V; 13.3A; 90-305VAC ; 127-431VDC RoHS : Compliant |
| 2 | ||
| RPS-120S-48 | Mean Well | Power supply; medical; 120W; 48V; 2.5A; 80-264VAC; 113-370VDC RoHS : Compliant |
| 1 | ||
| PAH100S48-28 | TDK Corporation | DC-DC Converters; PAH100S48-28; TDK; Module; 1; 3.6 A; 12.7 mm |
| 1 | ||
 Master Electronics | PSM-ME-RS485/RS485-P | Phoenix Contact | Repeater - for potential separation and range increase in RS-485 2-wire bus systems - 3-way isolation - rail-mountable RoHS : Compliant |
| 5 | |
| PCMAS48S48 | MTM Power | AC/DC Power Supply - 48W - 48VDC - Input 100-240 VAC - Chassis Mount - cUL/UL certified RoHS : Compliant |
| 3 | ||
| MTSW-150-09-G-S-488 | Samtec Inc | .100 Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MS4800A40048010X10RRM2AP | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
| MS4800B20048010X10RRM | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
| MS4800B30076010X10RRMX | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
| MS4800CDMANUAL | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
| MS4800S14072010X10R | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
| MS4800S140720R | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
| MS4800S141200X | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
| MS4800S20028015X30RRM | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
| MS4800S20048030X30R | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
| MS4800S20064010X10R | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
| MS4800S20064010X10RRM2A | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
| MS4800S30032015X15R | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
 Neutron USA | CFM81S480 | Cincon Electronics Corporation | Switching Power Supplies 80W 90-264Vin 48V 1.67A RoHS : Compliant |
| 50 | |
| ECS100US48 | XP Power | Power Supply; AC-DC; PSU, 100W, COMPACT OPEN FRAME RoHS : Compliant |
| 50 | ||
| AKM65US48C2 | XP Power | Desktop AC Adapter Medical&ITE; 65W 48V 1.35A; 90-264VAC Input, AC C8, DC Barrel 2.5mm RoHS : Compliant |
| 38 | ||
| HPF3K0PS48 | XP Power | Switching Power Supplies AC/DC 3kW programmable power supply RoHS : Compliant |
| 14 | ||
| VCE03US48 | XP Power | Power Supply; AC-DC; Encapsulated; 3W 48V 63mA; 85-305VAC In; PCB Mount RoHS : Compliant |
| 7 | ||
| RS485-USB | Littelfuse Inc | Interface Modules RS-485:RS-232CONV.W/ CABLE& |
| 5 | ||
| VFT150PS48 | XP Power | Power Supply; AC-DC; PSU, 100/150W 48V 2.1/3.13A for Convect/Forced air, 90 ~ 264 VACin, 1U 3X5" OPEN FRAME RoHS : Compliant |
| 4 | ||
| SHP1000PS48 | XP Power | Power Supply; AC-DC; 48V, 25A, 5V, 1A; 180-264V In; Enclosed; 1205W; Panel; SHP Series RoHS : Compliant |
| 4 | ||
CLC125US48 | XP Power | Switching Power Supplies PSU, 125W, OPEN FRAME, 2X4" RoHS : Compliant |
| 3 | ||
| MFA420PS48 | XP Power | Power Supply; AC-DC; 420W U-Channel, 48VDC 8.8A, Open Frame RoHS : Compliant |
| 2 | ||
| BI5U-Q08-AP6X2-0.6-RS4/S480-S481 | TURCK Inc | Inductive ProXimity Sensor, Rectang H 8mm, R: 5mm flush, DC 3-wire NO, PNP, 0.6m cable M12 Conn |
| 0 | ||
| VFB600-D24-S48 | CUI Inc | Isolated DC/DC Converters dc-dc isolated, 600 W, 18 36 Vdc input, 48 Vdc, 12.5 A, single output, DIP RoHS : Compliant |
| 0 | ||
| CFM500S480C | Cincon Electronics Corporation | Switching Power Supplies 500W 48V 7.92A w/Cover RoHS : Compliant |
| 0 | ||
| VHK50W-Q48-S48 | CUI Inc | Isolated DC/DC Converters dc-dc isolated, 50 W, 18 75 Vdc input, 48 Vdc, 1.04 A, single output, chassis mount RoHS : Compliant |
| 0 | ||
| FS48-750-C2 | Triad Magnetics | Power Transformers 48VCT@.75A 24V@1.5A 36VA 8pin Class 2 RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE3C10538LF/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Straight Cut Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-FR, RF Cable Type: LMR-240-FR, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Fire Rated N Male Right Angle to Straight Cut Lead Low Loss Cable 48 Inch Length Using LMR-240-FR Coax with HeatShrink, LF Solder., Pasternack’s PE3C10538LF/HS-48 low loss right angle type N male to straight cut lead sexless RF cable assembly using LMR-240-FR coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The type N male to straight cut lead sexless cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to straight cut lead cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle type N cable connection on one end and a straight cut lead cable connection on the other. Our type N to straight cut lead cable assembly has a male gender on end 1 and a sexless on end 2. PE3C10538LF/HS-48 can also be known as a low loss right angle type N plug to straight cut lead sexless cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10538LF/HS-48 RF cable has an frpe jacket of 0.240-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. This PE3C10538LF/HS-48 type N plug to straight cut lead sexless cable assembly is built with LMR-240-FR, which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with right angle type N to straight cut lead cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this 48-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3C10538LF/HS-48 can also be used in the other direction and will be a straight cut lead sexless to right angle type N male cable assembly if the opposite connectivity is required. This low loss type N right angle plug to straight cut lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to straight cut lead cable assembly for quick shipment worldwide. Variations of type N and straight cut lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to straight cut lead low loss RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems. |
| 1,609 | |
| PE3W02524LF/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Male Right Angle to N Male Low Loss Cable 48 Inch Length Using LMR-240 Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male right angle to N male low loss cable 48 inch length using LMR-240 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to N male low loss cable 48 inch length using LMR-240 coax with heatshrink, LF solder, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle SMA cable connection on one end and N type cable connection on the other. Our low loss right angle SMA to type N cable assemblies have a male gender on end 1 and male on end 2. This SMA to type N cable is a male to male coax assembly, PE3W02524LF/HS-48, can also be known as a low loss right angle SMA plug to N type plug cable assembly and will be shipped same-day as it is purchased. SMA plug to type N plug cable assembly PE3W02524LF/HS-48 is built with LMR-240 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA right angle male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W02524LF/HS-48 can also be used in the other direction and will be type N male to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to N male low loss cable 48 inch length using LMR-240 coax with heatshrink, LF solder. |
| 1,015 | ||
| PE3721/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG188-DS, RF Cable Type: RG188-DS, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMB Plug to SMB Plug Cable 48 Inch Length Using RG188-DS Coax with HeatShrink., Radio frequency assembly SMB plug to SMB plug cable 48 inch length using RG188-DS coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMB plug to SMB plug cable 48 inch length using RG188-DS coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMB to SMB cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMB cable connection on one end and a SMB cable connection on the other. Our SMB to SMB cable assembly has a plug gender on end 1 and a plug on end 2. PE3721/HS-48 can also be known as a SMB male to SMB male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3721/HS-48 RF cable has a PTFE jacket of 0.118-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has an in-series connection. Our SMB plug to SMB plug cable has a maximum VSWR of 1.4:1. SMB male to SMB male cable assembly PE3721/HS-48 is built with RG188-DS which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to SMB cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. SMB male to SMB male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMB to SMB cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMB to SMB RF cable assembly as per your requirements. |
| 377 | ||
| PE3C1064/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. 7/16 DIN Male Right Angle to 7/16 DIN Male Right Angle Low Loss Cable 48 Inch Length Using LMR-240 Coax with HeatShrink., Radio frequency assembly 7/16 DIN male right angle to 7/16 DIN male right angle low loss cable 48 inch length using LMR-240 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 7/16 DIN male right angle to 7/16 DIN male right angle low loss cable 48 inch length using LMR-240 coax with heatshrink, 7/16 DIN cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle 7/16 DIN cable connection on one end and right angle 7/16 DIN cable connection on the other. Our low loss right angle 7/16 DIN to right angle 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. PE3C1064/HS-48 can also be known as a low loss right angle 7/16 DIN plug to right angle 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN plug cable assembly PE3C1064/HS-48 is built with LMR-240 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with right angle 7/16 DIN to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency 7/16 DIN right angle male to 7/16 DIN right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss 7/16 DIN right angle plug to 7/16 DIN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male right angle to 7/16 DIN male right angle low loss cable 48 inch length using LMR-240 coax with heatshrink. |
| 140 | ||
| PE3C3868/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Male to Reverse Polarity SMA Female Cable Using RG142 Coax with HeatShrink in 48 Inch., Radio frequency assembly SMA male to reverse polarity SMA female cable using RG142 coax with heatshrink in 48 inch from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to reverse polarity SMA female cable using RG142 coax with heatshrink in 48 inch, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and reverse polarity SMA cable connection on the other. Our SMA to reverse polarity SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to reverse polarity SMA cable is a male to female coax assembly, PE3C3868/HS-48, can also be known as a SMA plug to reverse polarity SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to reverse polarity SMA jack cable assembly PE3C3868/HS-48 is built with RG142 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA male to reverse polarity SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3868/HS-48 can also be used in the other direction and will be reverse polarity SMA female to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA reverse polarity jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to reverse polarity SMA female cable using RG142 coax with heatshrink in 48 inch. |
| 83 | ||
| PE3C2179LF/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-LLPX, RF Cable Type: LMR-400-LLPX, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Plenum TNC Male to TNC Male Low Loss Cable 48 Inch Length Using LMR-400-LLPX Coax with Times Microwave Components with HeatShrink, LF Solder., Pasternack’s PE3C2179LF/HS-48 low loss TNC male to TNC male RF cable assembly using LMR-400-LLPX coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a TNC cable connection on the other. Our TNC to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3C2179LF/HS-48 can also be known as a low loss TNC plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable’s inner conducting material and PTFE (LD) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2179LF/HS-48 RF cable has an fluoropolymer jacket of 0.370-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 90 dB. Our TNC male to TNC male cable has a maximum VSWR of 1.4:1. This PE3C2179LF/HS-48 TNC plug to TNC plug cable assembly is built with LMR-400-LLPX, which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications, and CAD drawings for this 48-inch-long low loss RF cable are available on our downloadable PDF datasheet. This low loss TNC plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems. |
| 47 | ||
| PE3237/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Male to SSMB Plug Cable 48 Inch Length Using RG316 Coax with HeatShrink., Radio frequency assembly SMA male to SSMB plug cable 48 inch length using RG316 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SSMB plug cable 48 inch length using RG316 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SSMB cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SSMB cable connection on the other. Our SMA to SSMB cable assembly has male gender on end 1 and plug on end 2. PE3237/HS-48 can also be known as a SMA plug to SSMB male cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. SMA plug to SSMB male cable assembly PE3237/HS-48 is built with RG316 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SSMB cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3237/HS-48 RF cable are available on our downloadable PDF datasheet.PE3237/HS-48 can also be used in the other direction and will be SSMB plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to SSMB male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SSMB cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3336LF/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Female Bulkhead to SMB Plug Right Angle Cable 48 Inch Length Using RG188 Coax with HeatShrink, LF Solder., Radio frequency assembly SMA female bulkhead to SMB plug right angle cable 48 inch length using RG188 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female bulkhead to SMB plug right angle cable 48 inch length using RG188 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMB cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA bulkhead cable connection on one end and right angle SMB cable connection on the other. Our SMA to right angle SMB cable assembly has female gender on end 1 and plug on end 2. PE3336LF/HS-48 can also be known as a SMA jack to right angle SMB male cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. SMA jack to SMB male cable assembly PE3336LF/HS-48 is built with RG188 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMB cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3336LF/HS-48 RF cable are available on our downloadable PDF datasheet.PE3336LF/HS-48 can also be used in the other direction and will be right angle SMB plug to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to SMB right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMB cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3C0304LF/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Male to MMCX Plug Right Angle Low Loss Cable 48 Inch Length Using LMR-100 Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male to MMCX plug right angle low loss cable 48 inch length using LMR-100 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to MMCX plug right angle low loss cable 48 inch length using LMR-100 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to MMCX cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a right angle MMCX cable connection on the other. Our low loss SMA to right angle MMCX cable assembly has a male gender on end 1 and a plug on end 2. PE3C0304LF/HS-48 can also be known as a low loss SMA plug to right angle MMCX male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0304LF/HS-48 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our SMA male to right angle MMCX plug cable has a maximum VSWR of 1.4:1. SMA plug to MMCX male cable assembly PE3C0304LF/HS-48 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle MMCX cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C0304LF/HS-48 can also be used in the other direction and will be a right angle MMCX plug to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to MMCX right angle male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to MMCX cable assembly for quick shipment worldwide. Variations of SMA and MMCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to MMCX low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C0823LF/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Male Right Angle to SMA Male Right Angle Low Loss Cable 48 Inch Length Using LMR-100 Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male right angle to SMA male right angle low loss cable 48 inch length using LMR-100 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to SMA male right angle low loss cable 48 inch length using LMR-100 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a right angle SMA cable connection on the other. Our low loss right angle SMA to right angle SMA cable assembly has a male gender on end 1 and a male on end 2. PE3C0823LF/HS-48 can also be known as a low loss right angle SMA plug to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0823LF/HS-48 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our right angle SMA male to right angle SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3C0823LF/HS-48 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss SMA right angle plug to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C2478/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. BNC Male to SMA Male Low Loss Cable 48 Inch Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly BNC male to SMA male low loss cable 48 inch length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to SMA male low loss cable 48 inch length using LMR-100 coax with heatshrink, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and SMA cable connection on the other. Our low loss BNC to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C2478/HS-48 can also be known as a low loss BNC plug to SMA plug cable assembly and will be shipped same-day as it is purchased. BNC plug to SMA plug cable assembly PE3C2478/HS-48 is built with LMR-100A which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this BNC male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2478/HS-48 can also be used in the other direction and will be SMA male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to SMA cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to SMA male low loss cable 48 inch length using LMR-100 coax with heatshrink. |
| 0 | ||
| PE3C3893/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Male to SMA Male Cable 48 Inch Length Using PE-P086 Coax with HeatShrink., Radio frequency assembly SMA male to SMA male cable 48 inch length using PE-P086 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable 48 inch length using PE-P086 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3C3893/HS-48 can also be known as a SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C3893/HS-48 RF cable has a FEP jacket of 0.104-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 110 dB. SMA plug to SMA plug cable assembly PE3C3893/HS-48 is built with PE-P086 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3C5239/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. TNC Male to SMA Male Low Loss Cable 48 Inch Length Using LMR-200 Coax with Times Microwave Components with HeatShrink., Radio frequency assembly TNC male to SMA male low loss cable 48 inch length using LMR-200 coax with Times Microwave components with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to SMA male low loss cable 48 inch length using LMR-200 coax with Times Microwave components with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and SMA cable connection on the other. Our low loss TNC to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C5239/HS-48 can also be known as a low loss TNC plug to SMA plug cable assembly and will be shipped same-day as it is purchased. TNC plug to SMA plug cable assembly PE3C5239/HS-48 is built with LMR-200 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency TNC male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5239/HS-48 can also be used in the other direction and will be SMA male to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to SMA male low loss cable 48 inch length using LMR-200 coax with Times Microwave components with heatshrink. |
| 0 | ||
| PE3C6908/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. 4.3-10 Male to 4.3-10 Male Low Loss Cable 48 Inch Length Using LMR-400 Coax with Times Microwave Components with HeatShrink., Pasternack’s PE3C6908/HS-48 low loss 4.3-10 male to 4.3-10 male RF cable assembly using LMR-400 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 4.3-10 male to 4.3-10 male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a 4.3-10 cable connection on one end and a 4.3-10 cable connection on the other. Our 4.3-10 to 4.3-10 cable assembly has a male gender on end 1 and a male on end 2. PE3C6908/HS-48 can also be known as a low loss 4.3-10 plug to 4.3-10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C6908/HS-48 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our 4.3-10 male to 4.3-10 male cable has a maximum VSWR of 1.4:1. This PE3C6908/HS-48 4.3-10 plug to 4.3-10 plug cable assembly is built with LMR-400, which is a flexible coax type. The Pasternack flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 4.3-10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications, and CAD drawings for this 48-inch-long low loss RF cable are available on our downloadable PDF datasheet. This low loss 4.3-10 plug to 4.3-10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 4.3-10 low loss RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W02070/HS-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 48 inches. SMA Male to SMA Male Cable 48 Inch Length Using RG316 Coax with HeatShrink., Radio frequency assembly SMA male to SMA male cable 48 inch length using RG316 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male cable 48 inch length using RG316 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3W02070/HS-48, can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3W02070/HS-48 is built with RG316 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male cable 48 inch length using RG316 coax with heatshrink. |
| 0 | ||
 TE Connectivity | SSR3S-480D50R | TE Connectivity | SSR3S-480D50R=3PH SERIS-SCR,PANEL MOUNT Input Voltage Type: DC Contact Arrangement: 1 Form A SPST-NO Load Voltage Rating: 48 – 480 Vrms Output Switching: Random Load Voltage Type: AC DC 1 Form A SPST-NO 48 – 480 Vrms Random | Solid State Relay | Part Number: SSR3S-480D50R | Internal Number: 2-2345984-2 | TE Connectivity RoHS : Compliant |
| 9 | |
| SSR3S-480A50 | TE Connectivity | SSR3S-480A50=3PH SERIS-SCR,PANEL MOUNT Input Voltage Type: AC Contact Arrangement: 1 Form A SPST-NO Input Voltage Range: 90 – 280 VAC Load Voltage Rating: 48 – 480 Vrms Output Switching: Zero AC 1 Form A SPST-NO 90 – 280 VAC 48 – 480 Vrms | Solid State Relay | Part Number: SSR3S-480A50 | Internal Number: 2345984-8 | TE Connectivity RoHS : Compliant |
| 2 | ||
 Vyrian | CFM500S480C | Cincon Electronics | AC-DC Power Factor Correction Module, 1 Output, 409.92W, Hybrid | 14,385 | ||
| CLC175US48 | XP Power | AC-DC Regulated Power Supply Module, 3 Output, 175W, Hybrid RoHS : Compliant | 12,834 | |||
| TS487ID | STMicroelectronics | Audio Amplifier, 0.108W, 2 Channel(s), 1 Func, PDSO8 RoHS : Compliant | 9,491 | |||
| NTMFS4847NAT1G | onsemi | Small Signal Field-Effect Transistor, 11.5A I(D), 30V, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 8,427 | |||
| SN74LS481N3 | Texas Instruments | Bit-Slice Processor, TTL, PDIP48 RoHS : Not Compliant | 7,986 | |||
| SN54S482FH | Texas Instruments | Bit-Slice Processor, 4-Bit, TTL, PQCC20 | 7,463 | |||
ADM6384YKS48D1-RL7 | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +4.8VV, PDSO4 RoHS : Not Compliant | 5,039 | |||
| XC6SLX150T-3CS484I | AMD Xilinx | Field Programmable Gate Array, 862MHz, 147443-Cell, CMOS, PBGA484 RoHS : Not Compliant | 4,132 | |||
| XCF08PFS48C | AMD Xilinx | Configuration Memory, 8MX1, Serial, CMOS, PBGA48 RoHS : Not Compliant | 3,915 | |||
| XC9536XV-4CS48 | AMD Xilinx | Programmable Logic Device RoHS : Not Compliant | 3,781 | |||
XC3SD3400A-4CS484LI | AMD Xilinx | Field Programmable Gate Array, 5968 CLBs, 3400000 Gates, 250MHz, 53712-Cell, CMOS, PBGA484 RoHS : Not Compliant | 2,585 | |||
| XC6SLX75-N3CS484C | AMD Xilinx | Field Programmable Gate Array, 806MHz, 74637-Cell, CMOS, PBGA484 RoHS : Not Compliant | 2,090 | |||
| XQ6SLX75-1LCS484C | AMD Xilinx | Field Programmable Gate Array RoHS : Not Compliant | 1,358 | |||
| HAE75-24S48W | P-duke Technology | DC-DC Regulated Power Supply Module, 1 Output, 75W, Hybrid | 700 | |||
| AMEOFL5-5S480HANZ | Aimtec | AC-DC Regulated Power Supply Module RoHS : Compliant | 210 | |||
 Win Source Electronics | CS48505S | ChipAnalog | Transceiver Half RS422, RS485 SOIC-8 RoHS : Unknown |
| 100,000 | |
| TS4871IDT | STMicroelectronics | IC AMP AUDIO PWR 1W MONO 8SOIC RoHS : Compliant |
| 25,200 | ||
| TS488IQT | STMicroelectronics | IC AMP AUDIO PWR .13W STER 8DFN RoHS : Compliant |
| 25,000 | ||
| MURS480ET3G | onsemi | DIODE GEN PURP 800V 4A SMC RoHS : Compliant |
| 15,100 | ||
| UTRS485G-S08-R | United Technologies Corporation | Schmitt trigger 4.75V~5.25V 500uA 50ns@5V,100pF SOP-8 Buffers, Drivers, Receivers, Transceivers RoHS |
| 12,483 | ||
NTMFS4833NT1G | onsemi | MOSFET N-CH 30V 16A SO-8FL RoHS : Compliant |
| 10,500 | ||
| SIS488DN-T1-GE3 | Vishay Huntington | MOSFET N-CH 40V 40A 1212-8 / Trans MOSFET N-CH Si 40V 40A 8-Pin PowerPAK 1212 EP |
| 9,898 | ||
| RS485 | Others |
| 7,245 | |||
| BTS4880R | Infineon Technologies AG | Current Limit Switch High Side / IC HIGH SIDE PWR SWITCH DSO-36 RoHS : Compliant |
| 4,800 | ||
| XCF16PFS48C | AMD Xilinx | IC PROM SRL 1.8V 16M 48CSBGA RoHS : Not Compliant |
| 3,846 | ||
| FDS4897AC | Fairchild Semiconductor Corporation | MOSFET N/P-CH 40V 6.1A/5.2A 8SO RoHS : Compliant |
| 3,621 | ||
| DS485M/NOPB | Texas Instruments | IC TRANSCEIVER HALF 1/1 8SOIC / 1/1 Transceiver Half RS422, RS485 8-SOIC RoHS : Compliant |
| 2,220 | ||
| DS485MX/NOPB | Texas Instruments | IC TXRX MULTIPOINT LP 8-SOIC RoHS : Compliant |
| 2,200 | ||
| DS485MX | Texas Instruments | IC TXRX MULTIPOINT LP 8-SOIC RoHS : Not Compliant |
| 2,160 | ||
| MT29C4G48MAZBBAKS-48 IT | Micron Technology Inc | IC FLASH 4GB LPDDR 137VFBGA |
| 1,800 | ||
 Wuhan P&S | NTMS4816NR2G | onsemi | Power MOSFET 30 V, 11 A, N-Channel, SO-8 RoHS : Compliant |
| 2,500 | |
| NTMFS4834NT1G | onsemi | Power MOSFET 30 V, 130 A RoHS : Compliant |
| 1,450 |
| ALLDATASHEETはお客様のビジネスに役立ちますか？ [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Japanese ▼ 
English
Chinese
German
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand