| データシートサーチシステム |
|
S60L-T27-R 販売店 |
| 販売店 | 部品番号 | メーカー | 部品情報 | Price | Qty. BuyNow | |
![]() TME | SINUS600 12V | Volt Polska | Converter: DC/AC; 300W; Uout: 230VAC; 11÷15VDC; Ppeak: 600W; 0÷40°C |
| 6 | |
| SS-60000-010 | Bel Fuse | Connector: RJ45; socket; data transfer; PIN: 8; Cat 6; unshielded RoHS : Compliant |
| 6 | ||
| ZXMS6004FFQ-7 | Diodes Incorporated | IC: power switch; low-side; 1.3A; Ch: 1; N-Channel; SMD; SOT23F RoHS : Compliant |
| 0 | ||
| ZXMS6004DN8Q-13 | Diodes Incorporated | IC: power switch; low-side; 1.3A; Ch: 2; N-Channel; SMD; SO8 RoHS : Compliant |
| 0 | ||
| RBR40NS60AFHTL | ROHM Semiconductor | Diode: Schottky rectifying; D2PAK,SC83,TO263S; SMD; 60V; 20Ax2 RoHS : Compliant |
| 0 | ||
S6006LS3TP![]() | Littelfuse Inc | Thyristor: standard; 600V; Ifmax: 6A; 3.8A; Igt: 500uA; TO220-3; THT RoHS : Compliant |
| 0 | ||
S6006RTP![]() | Littelfuse Inc | Thyristor: standard; 600V; Ifmax: 6A; 3.8A; Igt: 15mA; TO220-3; THT RoHS : Compliant |
| 0 | ||
| S6008DS1RP | Littelfuse Inc | Thyristor: standard; 600V; Ifmax: 8A; 5.1A; Igt: 50uA; DPAK; SMD RoHS : Compliant |
| 0 | ||
S6010LS3TP![]() | Littelfuse Inc | Thyristor: standard; 600V; Ifmax: 10A; 6.4A; Igt: 500uA; TO220-3; THT RoHS : Compliant |
| 0 | ||
S6010RTP![]() | Littelfuse Inc | Thyristor: standard; 600V; Ifmax: 10A; 6.4A; Igt: 15mA; TO220-3; THT RoHS : Compliant |
| 0 | ||
| S60BV011 | Thermaltronics | Tip; conical sloped; 1.1mm; 325÷358°C; sloped 60° |
| 0 | ||
| SMOS60N60B3L | Sirectifier | Transistor: N-MOSFET; unipolar; TO264 |
| 0 | ||
| SWS600L-48 | TDK-Lambda Corporation | Power supply: switching; for building in,modular; 600W; 48VDC RoHS : Compliant |
| 0 | ||
TPS60401DBVR![]() | Texas Instruments | IC: PMIC; inverting; Uout: -5.25÷-1.6V; SOT23-5; boost,buck RoHS : Compliant |
| 0 | ||
| TPSB474M050S6000 | Kyocera AVX Components | Capacitor: tantalum; 0.47uF; 50VDC; SMD; B; 1210; ±20%; -55÷125°C RoHS : Compliant |
| 0 | ||
![]() Avnet Americas | NRS6028T100MMGK | TAIYO YUDEN | - Tape and Reel (Alt: NRS6028T100MMGK) RoHS : Compliant |
| 192,000 | |
| VLS6045AF-101M | TDK Corporation | - Tape and Reel (Alt: VLS6045AF-101M) RoHS : Compliant |
| 99,000 | ||
| NRS6045T330MMGK | TAIYO YUDEN | - Tape and Reel (Alt: NRS6045T330MMGK) RoHS : Compliant |
| 97,500 | ||
| NRS6045T4R7NMGK | TAIYO YUDEN | Power Inductor (SMD), 4.7 uH, ? 30%, 3.6 A, Shielded, 5.4 A, 6mm x 6mm x 4.5mm - Tape and Reel (Alt: NRS6045T4R7NMGK) RoHS : Compliant |
| 64,500 | ||
| NRS6028T220MMGJ | TAIYO YUDEN | - Tape and Reel (Alt: NRS6028T220MMGJ) RoHS : Compliant |
| 58,000 | ||
| MPZ2012S601ATD25 | TDK Corporation | - Tape and Reel (Alt: MPZ2012S601ATD25) RoHS : Compliant |
| 32,000 | ||
| TYS6045221M-10 | Qnity Laird | - Tape and Reel (Alt: TYS6045221M-10) RoHS : Compliant |
| 15,000 | ||
PTVS60VS1UR,115![]() | Nexperia | - Tape and Reel (Alt: PTVS60VS1UR,115) RoHS : Compliant |
| 3,000 | ||
| VLS6045EX-6R8M | TDK Corporation | - Tape and Reel (Alt: VLS6045EX-6R8M) RoHS : Compliant |
| 1,500 | ||
| ATS-60000-C1-R0 | Advanced Thermal Solutions Inc | MAXIFLOW HEAT SINK , DOUBLE-SIDED ADHE - Bulk (Alt: ATS-60000-C1-R0) RoHS : Compliant |
| 60 | ||
| ATS-HP-F6L150S60W-021 | Advanced Thermal Solutions Inc | HEATPIPE,L=150, W=8.0, H=3.0, SINTERED, - Trays (Alt: ATS-HP-F6L150S60W-021) RoHS : Compliant |
| 50 | ||
| SWS600L-60 | TDK Corporation | - Bulk (Alt: SWS600L-60) RoHS : Compliant |
| 34 | ||
| RWS600B-24 | TDK Corporation | - Bulk (Alt: RWS600B-24) RoHS : Compliant |
| 12 | ||
| HWS600-24/HD | TDK Corporation | - Bulk (Alt: HWS600-24/HD) RoHS : Compliant |
| 4 | ||
| 660-024NF13S6-01 | Glenair Inc | - Bulk (Alt: 660-024NF13S6-01) RoHS : Not Compliant |
| 1 | ||
![]() Newark | BT137S-600E,118 | WeEn Semiconductor Co Ltd | Triac, 8A, 600V, To-252; |Ween Semiconductors BT137S-600E,118 RoHS : Compliant |
| 6,451 | |
| MTSW-118-10-S-S-600 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 18Pos; |Samtec, Inc. MTSW-118-10-S-S-600 RoHS : Compliant |
| 369 | ||
DSPIC33FJ64GS606-I/PT![]() | Microchip Technology Inc | Ic, Dsc, 16Bit, 64K Flash, 64Tqfp; |Microchip Technology DSPIC33FJ64GS606-I/PT RoHS : Compliant |
| 262 | ||
| DW-08-13-S-S-600 | Samtec Inc | Conn Stack Brd, 2.54Mm, 8Pos, Hdr; |Samtec, Inc. DW-08-13-S-S-600 RoHS : Compliant |
| 222 | ||
| DW-10-11-T-S-600 | Samtec Inc | Conn Stack Brd, 2.54Mm, 10Pos, Hdr; |Samtec, Inc. DW-10-11-T-S-600 RoHS : Compliant |
| 221 | ||
| SM9236-BCE-S-600-002 | TE Connectivity | Pressure Sensor, Gauge, 0 To 600Psi; Pressure Type:Gauge; Operating Pressure Min:0Pa; Operating Pressure Max:600Pa; Supply Voltage Min:3V; Supply Voltage Max:5.5V; Sensor Case/Package:Soic; No. Of Pins:16Pins; Accuracy:- Rohs Compliant: Yes RoHS : Compliant |
| 221 | ||
| ZW-12-12-L-S-605-350 | Samtec Inc | Conn Stack Brd, 2.54Mm, 12Pos, Hdr; |Samtec, Inc. ZW-12-12-L-S-605-350 RoHS : Compliant |
| 194 | ||
DSPIC33FJ64GS606-I/PT![]() | Microchip Technology Inc | Digital Signal Controller-Dsc, 16 Bit, 64 Kb, 40Mhz, 3.6V, Tqfp-64; Product Range:Dspic33F Series; Core Frequency:40Mhz; Flash Memory Size:64Kb; No. Of I/O S:58I/O S; Embedded Interface Type:Ecan, I2C, Spi, Uart; Dsc Case Style:Tqfp Rohs Compliant: Yes RoHS : Compliant |
| 119 | ||
| DW-20-13-G-S-600 | Samtec Inc | Conn Stack Brd, 2.54Mm, 20Pos, Hdr; |Samtec, Inc. DW-20-13-G-S-600 RoHS : Compliant |
| 117 | ||
| EW-24-19-T-S-600 | Samtec Inc | Conn Stack Brd, 2.54Mm, 24Pos, Hdr; |Samtec, Inc. EW-24-19-T-S-600 RoHS : Compliant |
| 105 | ||
| EW-50-13-G-S-600 | Samtec Inc | Conn Stack Brd, 2.54Mm, 50Pos, Hdr; |Samtec, Inc. EW-50-13-G-S-600 RoHS : Compliant |
| 91 | ||
| DW-36-11-T-S-600 | Samtec Inc | Conn Stack Brd, 2.54Mm, 36Pos, Hdr; |Samtec, Inc. DW-36-11-T-S-600 RoHS : Compliant |
| 79 | ||
| FMWGS6011 | Fairview Microwave Inc | Waveguide Components; |Fairview Microwave FMWGS6011 RoHS : Compliant |
| 2 | ||
| OS600J2PAB | ABB Low Voltage Products and Systems | Ab Os600J2Pab |Abb OS600J2PAB RoHS : Not Compliant |
| 2 | ||
| FMWGS6048 | Fairview Microwave Inc | Waveguide Components; |Fairview Microwave FMWGS6048 RoHS : Compliant |
| 1 | ||
![]() Analog Devices Inc | DS60R+T&R | Analog Devices Inc | Analog Temperature Sensor RoHS : Compliant |
| 437 | |
| DS600U+ | Analog Devices Inc | ±0.5°C Accurate Analog-Output RoHS : Compliant |
| 227 | ||
| DS600U+T&R | Analog Devices Inc | ±0.5°C Accurate Analog-Output |
| 49 | ||
| DS28S60EVKIT# | Analog Devices Inc | DS28S60 EVALUATION SYSTEM |
| 14 | ||
| DS60R+U | Analog Devices Inc | Analog Temperature Sensor RoHS : Compliant | 0 | |||
![]() RS | SWS600L-12 (SWS600L12) | TDK-Lambda Corporation | POWER SUPPLY, AC-DC,12V,53A,100-265V IN, ENCLOSED, PNL MNT, EMBEDDED,636W, SWS SERIES |
| 65 | |
| RWS600B-24 | TDK-Lambda Corporation | AC-DC POWER SUPPLY, 24V, 25A, 85-265V, ENCLOSED, EMBEDDED, 600W, RWS600B SERIES RoHS : Compliant |
| 50 | ||
| SWS600L-24 (SWS600L24) | TDK-Lambda Corporation | POWER SUPPLY, AC-DC,24V,27A,100-265V IN, ENCLOSED, PNL MNT, EMBEDDED,648W, SWS SERIES |
| 35 | ||
| FDS-60-J-2 | Marathon Special Products | FUSED DISCONNECT SWITCH, 60A, 2P, CLASS J |
| 24 | ||
| SWS600L-5 (SWS600L5) | TDK-Lambda Corporation | POWER SUPPLY, AC-DC,5V,120A,100-265V IN, ENCLOSED, DIN RAIL, PFC,600W, SWS SERIES |
| 17 | ||
| A9S60120 | Schneider Electric | MINIATURE CURRENT SWITCH 250V 20A RoHS : Compliant |
| 5 | ||
| TIS 600-124 UDS | Traco Power | POWER SUPPLY; 576W; 24V@24A; 93-264V IN |
| 5 | ||
| HWS600-24/HD (HWS60024/HD) | TDK-Lambda Corporation | POWER SUPPLY, AC-DC,24V,27A,85-265V IN, ENCLOSED, PANEL MNT, PFC, HWS300-1500 SERIES |
| 3 | ||
| PS-606-HG | Tripp Lite | POWER STRIP, 6 OUTLETS, WALL/DESK MOUNT, 15A, 6FT CORD, MEDICAL-GRADE SERIES |
| 2 | ||
| HWS600-48 (HWS60048) | TDK-Lambda Corporation | POWER SUPPLY, AC-DC,48V,13A,85-265V IN, ENCLOSED, PANEL MNT, PFC, HWS300-1500 SERIES |
| 2 | ||
| DFPD-480-RP-90-RS60-F1012-R3-EP (8048152) | Festo | QUARTER TURN ACTUATOR FOR PROCESS VALVE,90 DEG RIGHT SWIVEL,6 BAR, F1012,SZ480 |
| 2 | ||
| GS60YL4Q | Banner Engineering Corp | GUIDE LIGHT, 60MM SPOT, 12-30 VDC, YELLOW, 4-DEGREE CLEAR LENS, QD, GS60 |
| 1 | ||
| EDS-608-T | Moxa Inc | ETHERNET SWITCH, 8 PORT, COMPACT, MANAGED, 2 SLOTS 4 PORT FAST ETHERNET MODULE |
| 1 | ||
| FLK-TIS60+ 30HZ (5133399) | Fluke Calibration | THERMAL IMAGER, 30 HZ, RESOLUTION: 320X240, IR FUSION, AUTOBLEND, TIS SERIES |
| 1 | ||
| DFPD-120-RP-90-RS60-F0507-R3-EP (8048144) | Festo | ACTUATOR, QTR TURN, AIR, SEMI-ROT DRIVE, 120NM, 90 DEG R, SGL ACT, 6 BAR, F0507 |
| 1 | ||
![]() Microchip Technology Inc | DSPIC33FJ32GS606-E/PT![]() | Microchip Technology Inc | 16-bit DSC, 64LD,32KB Flash,SMPS,CAN,DMA,40 MIPS,nanoWatt, TQFP, Projected EOL: 2036-03-05 RoHS : Compliant |
| 2,080 | |
DSPIC33FJ64GS606-E/PT![]() | Microchip Technology Inc | 16-bit DSC, 64LD,64KB Flash,SMPS,CAN,DMA,40 MIPS,nanoWatt, TQFP, Projected EOL: 2036-03-05 RoHS : Compliant |
| 1,658 | ||
| DSPIC33FJ32GS606T-50I/PT | Microchip Technology Inc | 16 Bit DSC, 32KB Flash, 4KB RAM, 50 MHz, 64 Pin, SMPS PWM, 2 QEI, DAC, 4 Comp, TQFP, Projected EOL: 2041-01-25 RoHS : Compliant |
| 1,200 | ||
DSPIC33FJ32GS608-E/PT![]() | Microchip Technology Inc | 16-bit DSC, 80LD,32KB Flash,SMPS, DMA,40 MIPS,nanoWatt, TQFP, Projected EOL: 2036-03-05 RoHS : Compliant |
| 833 | ||
DSPIC33FJ32GS606-I/MR![]() | Microchip Technology Inc | 16-bit DSC, 64LD,32KB Flash,SMPS, DMA,40 MIPS,nanoWatt, QFN, Projected EOL: 2036-03-05 RoHS : Compliant |
| 760 | ||
| DSPIC33FJ32GS606-50I/MR | Microchip Technology Inc | 16 Bit DSC, 32KB Flash, 4KB RAM, 50 MHz, 64 Pin, SMPS PWM, 2 QEI, DAC, 4 Comp, QFN, Projected EOL: 2041-01-25 RoHS : Compliant |
| 680 | ||
DSPIC33FJ32GS606-E/MR![]() | Microchip Technology Inc | 16-bit DSC, 64LD,32KB Flash,SMPS, DMA,40 MIPS,nanoWatt, QFN, Projected EOL: 2036-03-05 RoHS : Compliant |
| 440 | ||
DSPIC33FJ32GS608-I/PT![]() | Microchip Technology Inc | 16-bit DSC, 80LD,32KB Flash,SMPS, DMA,40 MIPS,nanoWatt, TQFP, Projected EOL: 2036-03-05 RoHS : Compliant |
| 357 | ||
| DSPIC33FJ32GS606-50I/PT | Microchip Technology Inc | 16 Bit DSC, 32KB Flash, 4KB RAM, 50 MHz, 64 Pin, SMPS PWM, 2 QEI, DAC, 4 Comp, TQFP, Projected EOL: 2041-01-25 RoHS : Compliant |
| 340 | ||
| DSPIC33FJ64GS608-50I/PT | Microchip Technology Inc | 16 Bit DSC, 64KB Flash, 9KB RAM, 50MHz, 80Pin, SMPS PWM, 2 QEI, CAN, DAC, 4 Comp, TQFP, Projected EOL: 2041-01-25 RoHS : Compliant |
| 231 | ||
DSPIC33FJ64GS608-E/PT![]() | Microchip Technology Inc | 16-bit DSC, 80LD,64KB Flash,SMPS,CAN,DMA,40 MIPS,nanoWatt, TQFP, Projected EOL: 2036-03-05 RoHS : Compliant |
| 119 | ||
DSPIC33FJ32GS606-I/PT![]() | Microchip Technology Inc | 16-bit DSC, 64LD,32KB Flash,SMPS,CAN,DMA,40 MIPS,nanoWatt, TQFP, Projected EOL: 2036-03-05 RoHS : Compliant |
| 92 | ||
| DSPIC33FJ64GS606T-50I/PT | Microchip Technology Inc | 16 Bit DSC, 64KB Flash, 9KB RAM, 50MHz, 64Pin, SMPS PWM, 2 QEI, CAN, DAC, 4 Comp, TQFP, Projected EOL: 2041-01-25 RoHS : Compliant |
| 33 | ||
| APT30DS60BG | Microchip Technology Inc | FRED DS 600 V 30 A TO-247, TO-247, Projected EOL: 2046-04-30 RoHS : Compliant |
| 28 | ||
| DSPIC33FJ64GS606-50I/PT | Microchip Technology Inc | 16-bit DSC, 64LD,64KB Flash,SMPS,CAN,DMA,50 MIPS,nanoWatt, TQFP, Projected EOL: 2041-01-25 RoHS : Compliant |
| 2 | ||
![]() Rochester Electronics | 74HC123D/S600J | Nexperia | Dual retriggerable monostable multivibrator with reset RoHS : Compliant |
| 27,500 | |
TPS60124PWPR![]() | Texas Instruments | IC VOLT REG Fixed Step-Up Charge Pump 1 OUT 3V 200mA 20-SOP T/R RoHS : Compliant |
| 6,000 | ||
TPS60131PWP![]() | Texas Instruments | IC VOLT REG Fixed Step-Up Charge Pump 1 OUT 5V 300mA 20-SOP Tube RoHS : Compliant |
| 437 | ||
TPS60210DGSR![]() | Texas Instruments | IC VOLT REG Fixed Step-Up Charge Pump 1 OUT 3.3V 100mA 10-SOP T/R RoHS : Compliant |
| 50 | ||
TPS60300DGS![]() | Texas Instruments | TPS60300 Single cell to 3.3V, 20mA dual output, high efficiency charge pump with open-drain power-good output RoHS : Compliant |
| 18,933 | ||
THS6012IDWP![]() | Texas Instruments | Special Purpose Amplifier Driver 2 CH 20-SOIC Tube RoHS : Compliant |
| 23,737 | ||
THS6043IPWPR![]() | Texas Instruments | Special Purpose Amplifier Driver 2 CH 14-SOP T/R RoHS : Compliant |
| 397,901 | ||
TPS60101PWP![]() | Texas Instruments | IC VOLT REG Fixed Step-Up Charge Pump 1 OUT 3.3V 100mA 20-SOP Tube RoHS : Compliant |
| 10,838 | ||
| EP1S60B956C7 | Altera Corporation | FPGAs Stratix 5215104b 1.425V 683 I/O 956-BGA Tray RoHS : Not Compliant |
| 121 | ||
| EP1S60B956C6 | Altera Corporation | FPGAs Stratix 5215104b 1.425V 683 I/O 956-BGA Tray RoHS : Not Compliant |
| 143 | ||
| TPS60131PWP | Burr-Brown Corp | IC VOLT REG Fixed Step-Up Charge Pump 1 OUT 5V 300mA 20-SOP Tube RoHS : Compliant |
| 10 | ||
| FMG1G400US60H | Fairchild Semiconductor Corporation | IGBT MOD 600V 400A 1.136kW RoHS : Compliant |
| 18 | ||
| FMG2G50US60 | Fairchild Semiconductor Corporation | IGBT MOD 600V 50A 250W RoHS : Compliant |
| 100 | ||
| RFS60TZ6SGC13 | ROHM Semiconductor | Rectifier Single Standard 650V 60A TO-247GE Tube RoHS : Compliant |
| 600 | ||
| BT137S-600E,118 | WeEn Semiconductor Co Ltd | TRIAC Logic - Sensitive Gate 600V 8A TO-252-3 T/R RoHS : Compliant |
| 5,000 | ||
![]() Sager | MS60/MS60 | Eaton Bussmann | Fixed Terminal Blocks TWIN 60A PMP REPLACEMENT SWITCH-ACB | 0 | ||
| AXK6S60447YG | Panasonic Electronic Components | BOARD TO BOARD & MEZZANINE CONNECTORS RoHS : Compliant |
| 0 | ||
| TCMD-05-S-60.00-01 | Samtec Inc | Ribbon Cables / IDC Cables 2.00 mm IDC Ribbon Cable Assembly, Terminal RoHS : Compliant |
| 0 | ||
| TCSD-15-S-60.00-01-N | Samtec Inc | Ribbon Cables / IDC Cables IDC Socket Cable Assemblies, 2.00mm Pitch RoHS : Compliant |
| 0 | ||
| TCSD-17-S-60.00-01-N | Samtec Inc | Ribbon Cables / IDC Cables RoHS : Compliant | 0 | |||
SUCS60505C![]() | Cosel USA Inc | Isolated DC/DC Converters - Through Hole 6W 5V 1A Through Hole RoHS : Compliant |
| 0 | ||
| 09MS60-04-1-03N | Grayhill Inc | Rotary Switches Rotary Switch,Military, shaft/panel seal, 60°, 4 deck, 1 pole/deck, 3 positions/pole, non-shorting RoHS : Compliant | 0 | |||
| CDS60 | Eaton Bussmann | Industrial & Electrical Fuses CNDIAN D-TYP 600V TD |
| 0 | ||
| TW-18-06-LM-S-605-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-18-06-S-S-605-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-23-06-FM-S-605-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-23-06-TM-S-605-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-33-06-H-S-605-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-33-08-F-S-600-090 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-35-06-L-S-605-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
![]() Coilcraft Direct | MOS6020-104MLC | Coilcraft Inc | Power inductor, shielded, 20% tol, SMT, RoHS RoHS : Compliant |
| 1,558 | |
| MOS6020-332MLC | Coilcraft Inc | Power inductor, shielded, 20% tol, SMT, RoHS RoHS : Compliant |
| 1,171 | ||
| MOS6020-474MLC | Coilcraft Inc | Power inductor, shielded, 20% tol, SMT, RoHS RoHS : Compliant |
| 762 | ||
| S6000-AL | Coilcraft Inc | Transformer, for NSC LM258x, RoHS RoHS : Compliant |
| 428 | ||
| MOS6020-334MLC | Coilcraft Inc | Power inductor, shielded, 20% tol, SMT, RoHS RoHS : Compliant |
| 374 | ||
| MOS6020-224MLC | Coilcraft Inc | Power inductor, shielded, 20% tol, SMT, RoHS RoHS : Compliant |
| 205 | ||
| MOS6020-222MLC | Coilcraft Inc | Power inductor, shielded, 20% tol, SMT, RoHS RoHS : Compliant |
| 126 | ||
| CS60-100L | Coilcraft Inc | Current sensor, RoHS RoHS : Compliant |
| 20 | ||
| MOS6020-153MLC | Coilcraft Inc | Power inductor, shielded, 20% tol, SMT, RoHS RoHS : Compliant |
| 16 | ||
| MOS6020-103MLC | Coilcraft Inc | Power inductor, shielded, 20% tol, SMT, RoHS RoHS : Compliant |
| 0 | ||
| MOS6020-473MLC | Coilcraft Inc | Power inductor, shielded, 20% tol, SMT, RoHS RoHS : Compliant |
| 0 | ||
| MOS6020-103MLE | Coilcraft Inc | Power inductor, shielded, 20% tol, SMT, RoHS RoHS : Compliant |
| 0 | ||
| MOS6020-103MLF | Coilcraft Inc | Power inductor, shielded, 20% tol, SMT, RoHS RoHS : Compliant |
| 0 | ||
| MOS6020-472MLE | Coilcraft Inc | Power inductor, shielded, 20% tol, SMT, RoHS RoHS : Compliant |
| 0 | ||
| CS60-010L | Coilcraft Inc | Current sensor, RoHS RoHS : Compliant |
| 0 | ||
![]() Ameya Holding Limited | STPS60150CT![]() | STMicroelectronics | STPS60150C Series Dual 150 V 270 A Through Hole Schottky Rectifier - TO-220-3 RoHS : Compliant | 22,080 | ||
| NRS6020T2R2NMGJ | TAIYO YUDEN | RoHS : Compliant | 2,500 | |||
| NRS6028T100MMGK | TAIYO YUDEN | RoHS : Compliant | 2,000 | |||
TPS60110PWPR![]() | Texas Instruments | RoHS : Compliant | 2,000 | |||
| NRS6045T330MMGK | TAIYO YUDEN | RoHS : Compliant | 1,500 | |||
TPS60240DGKR![]() | Texas Instruments | RoHS : Compliant | 1,349 | |||
| RBR20NS60ATL | ROHM Semiconductor | RoHS : Compliant |
| 1,000 | ||
TPS60401DBVR![]() | Texas Instruments | IC REG SWITCHED CAP INV SOT23-5 RoHS : Compliant | 845 | |||
| EP2S60F1020C5N | Intel Corporation | RoHS : Compliant | 212 | |||
| RB088NS-60FHTL | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
DSPIC33FJ32GS606T-I/PT![]() | Microchip Technology Inc | IC DSC 16BIT 32KB FLASH 64TQFP RoHS : Compliant | 91 | |||
| RFS60TZ6SGC13 | ROHM Semiconductor | RoHS : Compliant |
| 85 | ||
| RGCL60TS60DGC11 | ROHM Semiconductor | RoHS : Compliant |
| 69 | ||
| RGCL80TS60DGC11 | ROHM Semiconductor | RoHS : Compliant |
| 38 | ||
| RGCL80TS60GC11 | ROHM Semiconductor | RoHS : Compliant |
| 30 | ||
![]() ComSIT USA | CBD13W3M37S600ZAA | POSITRONIC INDUSTRIES INC | AVAILABLE EU | 91 | ||
| MPZ2012S601AT000 | TDK Corporation | AVAILABLE EU RoHS : Compliant | 61,993 | |||
| MSPS601 | AVAILABLE EU | 2,870 | ||||
| NRS6045T4RSMMOK | TAIYO YUDEN | AVAILABLE EU | 20,346 | |||
| NRS6045T6R3MMGKV | TAIYO YUDEN | AVAILABLE EU RoHS : Compliant | 16,202 | |||
| RS6011SP6007 | AVAILABLE EU | 2,516 | ||||
| TPS60400QDBVRQ1 | TEXAS INSTRUMENTS INC | AVAILABLE EU | 3,734 | |||
TPS60402QDBVRQ1![]() | Texas Instruments | AVAILABLE EU RoHS : Compliant | 9,000 | |||
![]() ComSIT USA | IMSA9637S60Y922 | Iriso Electronics Co Ltd | Board-to-board connector, 16 positions, fine pitch, SMT, for compact signal interconnection in consumer and industrial electronics RoHS : Compliant | 64,000 | ||
IDT04S60C![]() | Infineon Technologies AG | 2ND GENERATION THINQ SIC SCHOTTKY DIODE Rectifier Diode, Schottky, 1 Phase, 1 Element, 4A, 600V V(RRM), Silicon Carbide, TO-220AC RoHS : Compliant | 26,000 | |||
| BT136S600 | NXP Semiconductors | 4Q TRIAC 4 Quadrant Logic Level TRIAC, 600V V(DRM), 4A I(T)RMS, TO-252AA RoHS : Compliant | 4,460 | |||
| NRS6045T330MMGK | TAIYO YUDEN | WIRE-WOUND FERRITE POWER INDUCTOR FOR GENERAL ELECTRONIC EQUIPMENT General Purpose Inductor, 33uH, 20%, 1 Element, Ferrite-Core, SMD, 2424 RoHS : Compliant | 3,000 | |||
| AOT15S60L | Alpha & Omega Semiconductor | 600V 15A ALPHA MOS POWER TRANSISTOR Power Field-Effect Transistor, 15A I(D), 600V, 0.29ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-220AB RoHS : Compliant | 3,000 | |||
| NRS6020T6R8NMGJV | TAIYO YUDEN | SMD POWER INDUCTOR General Purpose Inductor, 6.8uH, 30%, 1 Element, SMD, 2424 RoHS : Compliant | 2,500 | |||
AOD4S60![]() | Alpha & Omega Semiconductor | 600 V, 4 A ALPHAMOS POWER TRANSISTOR Power Field-Effect Transistor, 4A I(D), 600V, 0.9ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-252 RoHS : Compliant | 2,500 | |||
MC68HC908AS60AVFU![]() | Freescale Semiconductor | 8-BIT MICROCONTROLLER UNIT (MCU) Microcontroller, 8-Bit, FLASH, 68HC08 CPU, 8.4MHz, HCMOS, PQFP64 RoHS : Not Compliant | 1,007 | |||
| VS60EPF12M3 | Vishay Intertechnologies | Rectifier Diode, 1 Phase, 1 Element, 60A, 1200V V(RRM), Silicon RoHS : Compliant | 1,000 | |||
| S908AS60AH3CFUE | Freescale Semiconductor | 8-BIT MCU Microcontroller, 8-Bit, FLASH, S908 CPU, 8MHz, CMOS, PQFP64 RoHS : Compliant | 808 | |||
TPS60101PWP![]() | Texas Instruments | REGULATED 3.3-V 100-MILLI AMP LOW-NOISE CHARGE PUMP DC/DC CONVERTER Switched Capacitor Regulator, 0.1A, 400kHz Switching Freq-Max, PDSO20 RoHS : Not Compliant | 59 | |||
THS6012IDWP![]() | Texas Instruments | 500-MILLI AMP DUAL DIFFERENTIAL LINE DRIVER Line Driver, 2 Func, 2 Driver, BIPolar, PDSO20 RoHS : Not Compliant | 56 | |||
| EP1S60F1020C5N | Altera Corporation | STRATIX DEVICE FAMILY Field Programmable Gate Array, 6570 CLBs, 57120-Cell, CMOS, PBGA1020 RoHS : Compliant | 39 | |||
| GA200HS60SPBF | Vishay Intertechnologies | STANDARD SPEED HALF-BRIDGE IGBT INT-A-PAK Insulated Gate Bipolar Transistor, 470A I(C), 600V V(BR)CES, N-Channel RoHS : Compliant | 13 | |||
| EP2S60F484C3ES | Altera Corporation | STRATIX II FPGA Field Programmable Gate Array, 24176 CLBs, 717MHz, 60440-Cell, CMOS, PBGA484 RoHS : Not Compliant | 1 | |||
![]() GLYN GmbH & Co. KG | GP2S60B | Sharp Microelectronics of the Americas | Photointerrupter 4-SMD | 900 | ||
![]() Interstate Connecting Components | 770-001S603 | Glenair Inc | MOLDED SHRINK BOOT STRAIGHT LIPPED W EYELET | 0 | ||
| CBD11W1F36S60V5X | Amphenol Positronic | RoHS : Not Compliant | 0 | |||
| CBD11W1F3S60V3S/AA | Amphenol Positronic | RoHS : Compliant | 0 | |||
| CBD11W1M37S60T2Z/AA | Amphenol Positronic | RoHS : Compliant | 0 | |||
| CBD11W1M3S60T2Z | Amphenol Positronic | RoHS : Not Compliant | 0 | |||
| CBD11W1M65S60V3Z/AA | Amphenol Positronic | RoHS : Compliant | 0 | |||
| CBD13W3F37S600S/AA | Amphenol Positronic | CBD SERIES DSUB 13POS FEMALE RoHS : Compliant |
| 0 | ||
| CBD13W3F3S600X/AA | Amphenol Positronic | RoHS : Compliant | 0 | |||
| CBD13W3M3S60T2Z | Amphenol Positronic | RoHS : Not Compliant | 0 | |||
| CBD13W3M3S60V3Z/AA | Amphenol Positronic | RoHS : Compliant | 0 | |||
| CBD13W6F3S60V3X/AA | Amphenol Positronic | RoHS : Compliant | 0 | |||
| CBD13W6M36S60V3Z | Amphenol Positronic | RoHS : Not Compliant | 0 | |||
| CBD13W6S37S60T20 | Amphenol Positronic | 0 | ||||
| CBD17W2F36S60TS/AA | Amphenol Positronic | RoHS : Compliant | 0 | |||
| CBD17W2F37S60T0/AA | Amphenol Positronic | RoHS : Compliant | 0 | |||
![]() PEI Genesis | CN1020A18G14S6-040 | Cinch Connectivity Solutions |
| 405 | ||
| CN1020A16G10S6-040 | Cinch Connectivity Solutions |
| 375 | |||
| CN1021A18G08S6-040 | Cinch Connectivity Solutions |
| 205 | |||
| GK-S600TT | Times Microwave Systems |
| 88 | |||
| CN1021A24G61S6-000 | Cinch Connectivity Solutions |
| 42 | |||
| EN2997S60898B6 | SOURIAU-SUNBANK | RoHS : Compliant |
| 26 | ||
| EN2997RS60898AN | SOURIAU-SUNBANK | RoHS : Compliant |
| 25 | ||
| CN1021A24G30S6-040 | Cinch Connectivity Solutions |
| 22 | |||
| CN0966B24G30S6-000 | Cinch Connectivity Solutions |
| 11 | |||
| CN0966B14S03S6-040 | Cinch Connectivity Solutions |
| 5 | |||
| CN0966B14S04S6-040 | Cinch Connectivity Solutions |
| 5 | |||
| HVSLS600022A1H6 | Amphenol Corporation |
| 0 | |||
| HVSLS600063A125 | Amphenol Corporation |
| 0 | |||
| PC06E8-4S-603 | Amphenol Corporation |
| 0 | |||
| SG3101E14S-60S | Amphenol Corporation |
| 0 | |||
![]() Powell Electronics | MTSW-118-10-S-S-600 | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 244 | |
| DW-05-13-T-S-600 | Samtec Inc | Cable Assembly, Wire-to-Board, Dual-Row RoHS : Compliant |
| 188 | ||
| DW-08-13-S-S-600 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 147 | ||
| DW-10-11-T-S-600 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 146 | ||
| DW-09-11-L-S-600 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 146 | ||
| DW-10-14-S-S-600 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 132 | ||
| SM9236-BCE-S-600-002 | TE Connectivity | PRESSURE SENSOR SM9236-BCE-S-600-002 RoHS : Compliant |
| 130 | ||
| ZW-12-12-L-S-605-350 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 128 | ||
| DW-18-12-G-S-600 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 90 | ||
| DW-20-12-L-S-600 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 79 | ||
| DW-20-13-G-S-600 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 77 | ||
| EW-24-19-T-S-600 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 69 | ||
| EW-50-13-G-S-600 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 60 | ||
| DW-36-11-T-S-600 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 52 | ||
| 660-023M21S6-06 | Glenair Inc | PROTECTIVE COVERS - PROTECTIVE COVERS |
| 5 | ||
![]() PUI | RS60SB-250 | 5,400 | ||||
| RS60RB-025 | 4,874 | |||||
| RS60RB-010 | 3,000 | |||||
| 9111-5MP10S60P10C7PU-A001 | 2,504 | |||||
| RS60RB-020 | 1,900 | |||||
| RS60RB-005 | 1,750 | |||||
| FMX-MS-60A | 1,441 | |||||
| RS60RB-075 | 1,299 | |||||
| RS60RB-050 | 875 | |||||
| TFLS-60A | 837 | |||||
| RS60SB-135 | 400 | |||||
| RS60SB-110 | 78 | |||||
| FMX-MS-60A-BP | 32 | |||||
![]() Chip 1 Exchange | MPZ2012S601AT | TDK Corporation | INSTOCK RoHS : Compliant | 158,994 | ||
| MPZ1608S601A | INSTOCK | 14,190 | ||||
| LF BK-1608HS601-T | TAIYO YUDEN | INSTOCK | 12,000 | |||
| B72207-S600-K111 | TDK Electronics | INSTOCK | 4,500 | |||
| BH03Y314S60R | INSTOCK | 4,000 | ||||
| PA-14S6025611 | INSTOCK | 3,094 | ||||
| TPS60401DBVT | INSTOCK | 2,500 | ||||
| 04P/S-6008-2374 | INSTOCK | 2,263 | ||||
| RR0510S-6042-F | Susumu Co Ltd | INSTOCK RoHS : Compliant | 617 | |||
| STPS60L30CKY-TR | STMicroelectronics | INSTOCK RoHS : Compliant | 600 | |||
| KGM05DS60G226M# | Kycon Inc | INSTOCK | 529 | |||
| RS603 | INSTOCK | 454 | ||||
| TPS60110PWPRG4 | INSTOCK | 17 | ||||
| NAS604-6P | INSTOCK | 10 | ||||
| R4014MSS60 | NKL | INSTOCK | 4 | |||
![]() Avnet Abacus | MPZ2012S601ATD25 | TDK Corporation | Ferrite Bead 0805 2012 Metric 600 ohm 2 A MPZ Series 01 ohm 25 (Alt: MPZ2012S601ATD25) RoHS : Compliant | 3,024,000 | ||
| MMZ1005S601HT000 | TDK Corporation | Ferrite Bead 0402 1005 Metric 600 ohm 440 mA MMZH Series 034 ohm 25 (Alt: MMZ1005S601HT000) RoHS : Compliant | 170,000 | |||
| B72210S600K101 | TDK Corporation | TVS Varistor 60 VAC 85 VDC StandarD B722 165 V Disc Radial Leaded 10 mm (Alt: B72210S0600K101) RoHS : Compliant | 89,500 | |||
| MMZ1005S601CT000 | TDK Corporation | Ferrite Bead 0402 1005 Metric 600 ohm 300 mA MMZ Series 052 ohm 25 (Alt: MMZ1005S601CT000) RoHS : Compliant | 70,000 | |||
| NRS6028T100MMGK | TAIYO YUDEN | Power Inductor SMD 10 H 22 A Shielded 22 A NRS Series - Tape and Reel (Alt: LMNRS6028T100MMGK) RoHS : Compliant | 60,000 | |||
| NRS6045T150MMGK | TAIYO YUDEN | - Tape and Reel (Alt: LMNRS6045T150MMGK) RoHS : Compliant | 24,000 | |||
| NRS6028T220MMGJ | TAIYO YUDEN | (Alt: LMNRS6028T220MMGJ) RoHS : Compliant | 20,000 | |||
| NRS6028T220MMGJV | TAIYO YUDEN | - Tape and Reel (Alt: LMNRS6028T220MMGJV) RoHS : Compliant | 14,000 | |||
| VLS6045EX-471M | TDK Corporation | Power Inductor SMD 470 uH 20 420 mA Shielded 400 mA 6mm x 6mm x 45mm (Alt: VLS6045EX-471M) RoHS : Compliant | 6,000 | |||
| AXK5S60347YG | Panasonic Electronic Components | (Alt: AXK5S60347YG) RoHS : Compliant | 4,000 | |||
| VLS6045EX-220M | TDK Corporation | Power Inductor SMD Wirewound 22 H 19 A Shielded 24 A VLSEX Series (Alt: VLS6045EX-220M) RoHS : Compliant | 1,500 | |||
| NRS6045T330MMGK | TAIYO YUDEN | - Tape and Reel (Alt: LMNRS6045T330MMGK) RoHS : Compliant | 1,500 | |||
| HVSLS600022A1H6 | Amphenol Corporation | Automotive Connector With Interlock Excel Mate HVSLS 600 Series Box Mount Receptacle 2 Contacts (Alt: HVSLS600022A1H6) RoHS : Compliant | 960 | |||
| HVSLS600022B1H6 | Amphenol Corporation | Conn Power RCP 2 POS 30mm Screw ST Box Mount 2 Terminal 1 Port (Alt: HVSLS600022B1H6) RoHS : Compliant | 400 | |||
| SS-60000-009 | Bel Fuse | Modular Connector Vertical RJ45 Jack 1 x 1 Port 8P8C Cat6 Through Hole Mount (Alt: SS-60000-009) RoHS : Compliant | 50 | |||
![]() Avnet Asia | PTVS60VS1UR-QX | Nexperia | (Alt: PTVS60VS1UR-QX) RoHS : Compliant | 18,000 | ||
PTVS60VS1UTR,115![]() | Nexperia | TVS Diode, PTVSxS1UTR Series, Unidirectional, 60 V, 96.8 V, SOD-123W, 2 Pins (Alt: PTVS60VS1UTR,115) RoHS : Compliant | 9,000 | |||
| TYS60456R8N-15T | Qnity Laird | Ind Power Shielded Wirewound 6.8uH 30% 100kHz 3A T/R (Alt: TYS60456R8N-15T) RoHS : Compliant |
| 6,000 | ||
NSS60200LT1G![]() | onsemi | Low VCE(sat) Transistor, PNP, -60 V, 2.0 A. (Alt: NSS60200LT1G) RoHS : Compliant |
| 3,000 | ||
| ECS-60-S-1X | ECS International Inc | (Alt: ECS-60-S-1X) RoHS : Compliant | 0 | |||
| NRS6028T100MMGK | TAIYO YUDEN | (Alt: NRS6028T100MMGK) RoHS : Compliant | 0 | |||
| KGM05BS60J225KHAX00 | KYOCERA Corporation | (Alt: KGM05BS60J225KHAX00) RoHS : Compliant | 0 | |||
| BT150S-600R,118 | WeEn Semiconductor Co Ltd | Thyristor SCR 600V 38A 3-Pin(2+Tab) DPAK T/R (Alt: BT150S-600R,118) RoHS : Compliant | 0 | |||
| NRS6014T150MMGG | TAIYO YUDEN | (Alt: NRS6014T150MMGG) RoHS : Compliant | 0 | |||
| NRS6028T220MMGJV | TAIYO YUDEN | (Alt: NRS6028T220MMGJV) RoHS : Compliant | 0 | |||
| VLS6045EX-6R8M | TDK Corporation | (Alt: VLS6045EX-6R8M) RoHS : Compliant | 0 | |||
| KGM05CS60J106MN | KYOCERA Corporation | (Alt: KGM05CS60J106MN) RoHS : Compliant | 0 | |||
| LVS606028-1R5T-N | Pulse Electronics Corporation | (Alt: LVS606028-1R5T-N) RoHS : Compliant | 0 | |||
| KW SIURA1.KD-FQHP-DE20DS60-HN-N4S4-30-L | ams OSRAM Group | (Alt: KW SIURA1.KD-FQHP-DE20DS60-HN-N4S4-30-L) RoHS : Compliant | 0 | |||
| RTBS60M | Taiwan Semiconductor | (Alt: RTBS60M) RoHS : Compliant | 0 | |||
![]() Avnet Silica | ZXMS6004FFTA | Diodes Incorporated | (Alt: ZXMS6004FFTA) RoHS : Compliant | 66,000 | ||
PTVS60VS1UTR,115![]() | Nexperia | TVS Diode PTVSxS1UTR Series Unidirectional 60 V 968 V SOD123W 2 Pins (Alt: PTVS60VS1UTR,115) RoHS : Compliant | 54,000 | |||
| GP2S60B | Sharp Microelectronics of the Americas | (Alt: GP2S60B) RoHS : Compliant | 48,000 | |||
| ZXMS6004SGTA | Diodes Incorporated | (Alt: ZXMS6004SGTA) RoHS : Compliant | 26,000 | |||
PTVS60VS1UR,115![]() | Nexperia | (Alt: PTVS60VS1UR,115) RoHS : Compliant | 12,000 | |||
| GP2S60 | Sharp Microelectronics of the Americas | (Alt: GP2S60) RoHS : Compliant | 6,000 | |||
| BT137S-600E,118 | WeEn Semiconductor Co Ltd | Thyristor TRIAC 600V 71A 3Pin2Tab DPAK TR (Alt: BT137S-600E,118) RoHS : Compliant | 5,000 | |||
STPS60150CT![]() | STMicroelectronics | Schottky Rectifier 150 V 60 A Dual Common Cathode TO220AB 3 Pins 105 V (Alt: STPS60150CT) RoHS : Compliant | 4,050 | |||
| ZXMS6004FFQTA | Diodes Incorporated | Power MOSFET N Channel 60 V 2 A 035 ohm SOT23F Surface Mount (Alt: ZXMS6004FFQTA) RoHS : Compliant | 3,000 | |||
PTVS60VP1UP,115![]() | Nexperia | TVS Diode PTVSxP1UP Series (Alt: PTVS60VP1UP,115) RoHS : Compliant | 3,000 | |||
| ZXMS6005DN8-13 | Diodes Incorporated | (Alt: ZXMS6005DN8-13) RoHS : Compliant | 2,500 | |||
| ZXMS6005N8Q-13 | Diodes Incorporated | (Alt: ZXMS6005N8Q-13) RoHS : Compliant | 2,500 | |||
| BTA204S-600E,118 | WeEn Semiconductor Co Ltd | Thyristor TRIAC 600V 27A 3Pin2Tab DPAK TR (Alt: BTA204S-600E,118) RoHS : Compliant | 2,500 | |||
| DSPIC33FJ64GS608T-I/PTV05 | Microchip Technology Inc | MCU 16Bit DSPIC33FJ dsPIC RISC 64KB Flash 3V to 36V 80Pin TQFP TR (Alt: DSPIC33FJ64GS608T-I/PTV05) RoHS : Compliant | 2,400 | |||
| ZXMS6006DGQTA | Diodes Incorporated | (Alt: ZXMS6006DGQTA) RoHS : Compliant | 1,000 | |||
![]() Component Electronics, Inc | MMZ2012S601A | TDK Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 3,600 | |
| AS-6.000-18-EXT-SMD-T | Raltron Electronics Corporation | IN STOCK SHIP TODAY |
| 2,900 | ||
| MPZ1608S601A | TDK Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 1,326 | ||
| CS60-050 | Coilcraft Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 527 | ||
| SC18IS602BIPW-128 | NXP Semiconductors | IN STOCK SHIP TODAY |
| 526 | ||
| MS600-6-XP-4C | Marathon Special Products | IN STOCK SHIP TODAY |
| 217 | ||
| NRS6028T470MMGJ | TAIYO YUDEN | IN STOCK SHIP TODAY RoHS : Compliant |
| 38 | ||
| MOS6020-223MLB | Coilcraft Inc | IN STOCK SHIP TODAY RoHS : Compliant | 10 | |||
| NRS6014T150MMGG | TAIYO YUDEN | IN STOCK SHIP TODAY RoHS : Compliant |
| 10 | ||
| TPS-60 | Eaton Bussmann | IN STOCK SHIP TODAY RoHS : Unknown |
| 8 | ||
AUIPS6041S![]() | International Rectifier | IN STOCK SHIP TODAY RoHS : Compliant |
| 7 | ||
| VHS60-58 | IN STOCK SHIP TODAY | 4 | ||||
| S6065K | RECATE | IN STOCK SHIP TODAY |
| 3 | ||
| FES60 | Ferraz Shawmut | IN STOCK SHIP TODAY |
| 2 | ||
| XS608B1PAM12 | Telemechanique Sensors | IN STOCK SHIP TODAY |
| 1 | ||
![]() DB Roberts | NAS601-3P | Military Specifications |
| 285 | ||
| TF250S60-18-15 | Tech-Etch | 25 | ||||
| 250S60-18-09 | Tech-Etch | 18 | ||||
| EHCBS-6-01 | Essentra Components | CB SptEdge HoldNatural3/8 in Spc | 0 | |||
| LNCBS-6-01 | Essentra Components | CB SptLong NoseNatural3/8 in Spc CB Support Long Nose Natural | 0 | |||
| 7587-4S-60 | HeliCoil | TANGLESS HT M4X0.7 | 0 | |||
| FHS-60 | Sugatsune Kogyo Co Ltd | WELD ON BUTT HINGE, 304 STAINL | 0 | |||
| DLCBS-6-01 | Essentra Components | CB SptDual LckNatural3/8 in Spc CB Support Dual Lock Natural | 0 | |||
| PS-6-01 | Essentra Components | CB SptRest MntNatural3/8 in Spc CB Support Rest Mnt Natural | 0 | |||
| MS6018Z-1-1 | Essentra Components | LATCH, COMPRESSION TRIGGER LOC | 0 | |||
| LS60WT | Sugatsune Kogyo Co Ltd | CABLE GROMMET | 0 | |||
| CBDLS605A | Essentra Components | 0 | ||||
| SCBS-6-01 | Essentra Components | CB SptThrd ML8-32Nat3/8 inSpc | 0 | |||
| 3810S-24-S600 | Sugatsune Kogyo Co Ltd | CABINET LOCK | 0 | |||
| MGS-6-01 | Essentra Components | GROMMET STRIP,NAT,..255-.318 I | 0 | |||
![]() EBV Elektronik | 67-21SYGC/S530-E3/S605/TR8 | Everlight Electronics Co Ltd | LED Single Chip Yellow Green 573nm 25mA 2Pin PLCC TR (Alt: 3867210G00) RoHS : Compliant | 8,000 | ||
| ITS6035SEPKXUMA1 | Infineon Technologies AG | (Alt: SP005858659) RoHS : Compliant | 3,000 | |||
| VS-60CTQ150-M3 | Vishay Intertechnologies | (Alt: VS-60CTQ150-M3) RoHS : Compliant | 1,450 | |||
| STPS60SM200CW | STMicroelectronics | Schottky Rectifier 200 V 60 A Dual Common Cathode TO247 3 Pins (Alt: STPS60SM200CW) RoHS : Compliant | 1,320 | |||
STPS60L30CW![]() | STMicroelectronics | Diode Schottky 30V 30A 3Pin3Tab TO247 Tube (Alt: STPS60L30CW) RoHS : Compliant | 780 | |||
| VS-60CPQ150-N3 | Vishay Intertechnologies | Schottky TO247 (Alt: VS-60CPQ150-N3) RoHS : Compliant | 625 | |||
STPS60150CT![]() | STMicroelectronics | Schottky Rectifier 150 V 60 A Dual Common Cathode TO220AB 3 Pins 105 V (Alt: STPS60150CT) RoHS : Compliant | 550 | |||
STPS60170CT![]() | STMicroelectronics | Diode Schottky 170V 60A 3Pin3Tab TO220AB Tube (Alt: STPS60170CT) RoHS : Compliant | 500 | |||
| VS-60APU04LHN3 | Vishay Intertechnologies | Freds TO247 (Alt: VS-60APU04LHN3) RoHS : Compliant | 475 | |||
STPS60L45CW![]() | STMicroelectronics | Diode Schottky 45V 30A 3Pin3Tab TO247 Tube (Alt: STPS60L45CW) RoHS : Compliant | 420 | |||
| VS-60APF12-M3 | Vishay Intertechnologies | New Input Diodes TO247 (Alt: VS-60APF12-M3) RoHS : Compliant | 400 | |||
| BXNS-MS-60LT-E104N-02-A | Bridgelux Inc | 60W Linear Metal NonSELV NonDim Linear 220240V 200350mA (Alt: BXNS-MS-60LT-E104N-02-A) RoHS : Compliant | 400 | |||
| VS-60APU02-N3 | Vishay Intertechnologies | Freds TO247 (Alt: VS-60APU02-N3) RoHS : Compliant | 375 | |||
| VS-60APH03L-N3 | Vishay Intertechnologies | (Alt: VS-60APH03L-N3) RoHS : Compliant | 175 | |||
| VS-60EPS08-M3 | Vishay Intertechnologies | New Input Diodes TO247 (Alt: VS-60EPS08-M3) RoHS : Compliant | 75 | |||
![]() Flip Electronics | CY15B102N-ZS60XET | Cypress Semiconductor | Stock RoHS : Compliant | 7,604 | ||
NCS603DTBR2G![]() | onsemi | Stock, Ship Today RoHS : Compliant | 7,429 | |||
ICS601R-25ILF![]() | Integrated Device Technology Inc | Stock RoHS : Compliant | 1,965 | |||
NHPV08S600G![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 1,707 | ||
| S908AS60AH3CFUER | NXP Semiconductors | Stock | 1,500 | |||
| FFP08S60SNTU | onsemi | Stock, Ship Today RoHS : Compliant |
| 1,000 | ||
| S29GL01GS11DHSS60 | Infineon Technologies AG | Stock, Ship Today |
| 668 | ||
| S29GL01GS12DHSS60 | Cypress Semiconductor | Stock | 668 | |||
| MC908AS60ACFNE | NXP Semiconductors | Stock, Ship Today |
| 632 | ||
| FFH30S60STU | onsemi | Stock, Ship Today RoHS : Compliant |
| 500 | ||
| EP1S60F1020C7N | Altera Corporation | Stock RoHS : Compliant | 423 | |||
| DPH30IS600HI | Littelfuse Inc | Stock RoHS : Compliant | 240 | |||
| BLM7G22S-60PBGY | Flip Electronics Manufacturing Services | Stock, Ship Today | 151 | |||
| EP1S60F1020C6 | Altera Corporation | Stock RoHS : Not Compliant | 96 | |||
| EP1S60F1020C6N | Altera Corporation | Stock, Ship Today RoHS : Compliant |
| 96 | ||
![]() Master Electronics | AXK6S60447YG | Panasonic Electronic Components | Conn Board to Board PL 60 POS 0.5mm Solder ST SMD T/R RoHS : Compliant |
| 1,450 | |
DSPIC33FJ64GS606-I/PT![]() | Microchip Technology Inc | MCU - 16-bit dsPIC - 64KB Flash - 8KB RAM - -40°C to +85°C - 3.3V - 64-Pin TQFP - Tray RoHS : Compliant |
| 75 | ||
| TCMD-05-S-60.00-01 | Samtec Inc | 2.00 MM IDC RIBBON CABLE RoHS : Compliant |
| 0 | ||
| TCMD-20-S-60.29-01 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TCSD-15-S-60.00-01-N | Samtec Inc | IDC SOCKET CABLE ASSEMBLI RoHS : Compliant |
| 0 | ||
| TCSD-20-S-60.53-01-N | Samtec Inc | RoHS : Compliant |
| 0 | ||
| CM-33S60 | Teledyne Coax Switches | RF Switch RoHS : Compliant |
| 0 | ||
| TW-18-06-LM-S-605-SM | Samtec Inc | 2Mm Terminal Strips |Samtec Inc. TW-18-06-LM-S-605-SM RoHS : Compliant |
| 0 | ||
| TW-18-06-S-S-605-SM | Samtec Inc | 2Mm Terminal Strips |Samtec Inc. TW-18-06-S-S-605-SM RoHS : Compliant |
| 0 | ||
| TW-23-06-FM-S-605-SM | Samtec Inc | 2Mm Terminal Strips |Samtec TW-23-06-FM-S-605-SM RoHS : Compliant |
| 0 | ||
| TW-23-06-TM-S-605-SM | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-33-06-H-S-605-SM | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-33-08-F-S-600-090 | Samtec Inc | Conn Board Stacker HDR 33 POS 2mm Solder ST Through Hole RoHS : Compliant |
| 0 | ||
| MBS601-1T24-SL | Bel Power Solutions | AC/DC CONVERTER 24V 600W RoHS : Compliant |
| 0 | ||
| ESQT-109-02-FM-S-600 | Samtec Inc | 2.00 mm FleXYZ™ Flexible Elevated Socket Strip RoHS : Compliant |
| 0 | ||
![]() Neutron USA | RWS600B-24 | TDK-Lambda Corporation | Switching Power Supplies 24Vout 25A 600W 85-265VAC RoHS : Compliant |
| 50 | |
| RPS-60-5 | Mean Well | Switching Power Supplies 50W 5V 10A RoHS : Compliant |
| 50 | ||
| CUS600M-36/ADJ | TDK-Lambda Corporation | Switching Power Supplies 85-265VAC RoHS : Compliant |
| 24 | ||
| CUS60M-12/A | TDK-Lambda Corporation | Switching Power Supplies AC-DC, Medical, 115-230VAC, Output 12V 5A, 60W + Cover |
| 4 | ||
| HWS600-15/HD | TDK-Lambda Corporation | Switching Power Supplies 645W 15V 43A RoHS : Compliant |
| 3 | ||
| DFS60E-S4EL01024 | SICK AG | Incremental Encoder, 1,024 PPR, 10 x 19 mm Dia. Shaft, 10-32 V, 3 m Cable |
| 1 | ||
| MGS60512 | Cosel USA Inc | Isolated DC/DC Converters 6W 4.5-9Vin 12Vout 0.5A TH RoHS : Compliant |
| 1 | ||
SUCS60505C![]() | Cosel USA Inc | Isolated DC/DC Converters 6W 5V 1A Through Hole 6-DIP RoHS : Compliant |
| 0 | ||
| MBS601-1T24-SL | Bel Power Solutions | Modular Power Supply, In 85-305VAC; Out 24VDC 25A 600W, Nat Conv, ENCLOSED |
| 0 | ||
| DFS60A-S4CA32768 | SICK AG | Incremental Encoder, 32, 768 PPR, 10 x 19 mm Dia.Shaft, 10-32 V, Connector |
| 0 | ||
| DFS60B-S1PA10000 | SICK AG | Incremental Encoder; 10; 000 PPR; 6 x 10mm Dia.Shaft; 4.5-32 V; Connector |
| 0 | ||
| CUS600M-24/EF | TDK-Lambda Corporation | Switching Power Supplies Med End Fan 115-230V 600W 24V 25A RoHS : Compliant |
| 0 | ||
| HRL3024S600N | XP Power | DC-DC Converter; High Voltage; 30W; 0 to -600V; 1.5A; 22-30V In RoHS : Compliant |
| 0 | ||
| HWS600-5 | TDK-Lambda Corporation | Switching Power Supplies 600W 5V 120A AC/DC with cover RoHS : Compliant |
| 0 | ||
| BRDS60S | Cosel USA Inc | Non-Isolated DC/DC Converters 4.5-14Vin 0.6-2Vout 60A NON-ISO SMT RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3C0841/HS-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Male to TNC Male Low Loss Cable 60 Inch Length Using LMR-240-UF Coax with HeatShrink., Radio frequency assembly SMA male to TNC male low loss cable 60 inch length using LMR-240-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC male low loss cable 60 inch length using LMR-240-UF coax with heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and TNC cable connection on the other. Our low loss SMA to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C0841/HS-60 can also be known as a low loss SMA plug to TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to TNC plug cable assembly PE3C0841/HS-60 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0841/HS-60 can also be used in the other direction and will be TNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to TNC male low loss cable 60 inch length using LMR-240-UF coax with heatshrink. |
| 1,240 | |
| PE3W03065/HS-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to N Male Right Angle Low Loss Cable 60 Inch Length Using LMR-240-UF Coax with HeatShrink., Radio frequency assembly N male to N male right angle low loss cable 60 inch length using LMR-240-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male right angle low loss cable 60 inch length using LMR-240-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle type N cable connection on the other. Our low loss type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3W03065/HS-60 can also be known as a low loss type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W03065/HS-60 RF cable has a TPE jacket of 0.240-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Type N plug to type N plug cable assembly PE3W03065/HS-60 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/non-solder contact attachment method and a brass body with tri-metal plating, while the other has the crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W03065/HS-60 can also be used in the other direction and will be a right angle type N male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 1,240 | ||
| PE3W09738/HS-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. TNC Male to SMA Male Right Angle Low Loss Cable 60 Inch Length Using LMR-240-UF Coax with HeatShrink., Radio frequency assembly TNC male to SMA male right angle low loss cable 60 inch length using LMR-240-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to SMA male right angle low loss cable 60 inch length using LMR-240-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a right angle SMA cable connection on the other. Our low loss TNC to right angle SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W09738/HS-60 can also be known as a low loss TNC plug to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W09738/HS-60 RF cable has a TPE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our TNC male to right angle SMA male cable has a maximum VSWR of 1.4:1. TNC plug to SMA plug cable assembly PE3W09738/HS-60 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W09738/HS-60 can also be used in the other direction and will be a right angle SMA male to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 988 | ||
| PE3W06686/HS-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Jack, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. Reverse Polarity BNC Plug to Reverse Polarity BNC Jack Low Loss Cable 60 Inch Length Using LMR-195 Coax with HeatShrink., Radio frequency assembly reverse polarity BNC plug to reverse polarity BNC jack low loss cable 60 inch length using LMR-195 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Reverse polarity BNC plug to reverse polarity BNC jack low loss cable 60 inch length using LMR-195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with reverse polarity BNC cable connection on one end and reverse polarity BNC cable connection on the other. Our low loss reverse polarity BNC to reverse polarity BNC cable assemblies have a plug gender on end 1 and jack on end 2. PE3W06686/HS-60 can also be known as a low loss reverse polarity BNC male to reverse polarity BNC female cable assembly and will be shipped same-day as it is purchased. Reverse polarity BNC male to reverse polarity BNC female cable assembly PE3W06686/HS-60 is built with LMR-195 which is a flexible coax type. The Pasternack flexible reverse polarity BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this reverse polarity BNC plug to reverse polarity BNC jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06686/HS-60 can also be used in the other direction and will be reverse polarity BNC jack to reverse polarity BNC plug cable assembly if the opposite connectivity is required. Low loss BNC reverse polarity male to BNC reverse polarity female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity BNC plug to reverse polarity BNC jack low loss cable 60 inch length using LMR-195 coax with heatshrink. |
| 213 | ||
| PE3C5568/HS-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MMBX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMA Female to Snap-On MMBX Plug Cable 60 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly SMA female to snap-on MMBX plug cable 60 inch length using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female to snap-on MMBX plug cable 60 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to MMBX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and MMBX cable connection on the other. Our SMA to MMBX cable assemblies have a female gender on end 1 and plug on end 2. This SMA to MMBX cable is a female to plug coax assembly, PE3C5568/HS-60, can also be known as a SMA jack to MMBX male cable assembly and will be shipped same-day as it is purchased. SMA jack to MMBX male cable assembly PE3C5568/HS-60 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to MMBX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 12.5 GHz maximum frequency SMA female to MMBX plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5568/HS-60 can also be used in the other direction and will be MMBX plug to SMA female cable assembly if the opposite connectivity is required. SMA jack to MMBX male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to MMBX cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to snap-on MMBX plug cable 60 inch length using PE-SR405FLJ coax. |
| 69 | ||
| PEWGS6069 | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-112, Waveguide Type: Standard, Flange Size Flange Type Flange Group: CPR Flat Standard Flange, Frequency Band: X band, Minimum Frequency: 7.05 GHz, Maximum Frequency: 10 GHz, Impedance: 50 Ohms, Maximum VSWR: 1.1:1, Switch Design: SPDT/DPDT DPDT, Actuator Type: Failsafe Actuator, Additional Actuator Feature 1: Window Indicator, Additional Actuator Feature 2: Manual Override. WR-112 Waveguide Electromechanical Relay SPDT/DPDT Failsafe Switch, X Band 10 GHz, 7,000 Watts, CPR Flat, 28V, Window Indicator., WR112 standard waveguide electromechanical relay switch PEWGS6069 is part of Pasternack’s international ISO 9001:2008 certified facility same-day shipping program. Manufactured as SPDT and interchangeable DPDT settings, WR112 standard electromechanical waveguides are relay switches with failsafe actuators. Pasternack innovative SPDT/DPDT WR112 black-plated electromechanical switches are always in stock and have a 7,000 Watt maximum input power rating with a 202 KW peak power rating. 7,000 watts failsafe aluminum waveguide relay switch PEWGS6069 can operate in the ultra-wide X band frequency range of 7.05 GHz to 10 GHz. 10 GHz max WR112 7,000 watt waveguide electromechanical relay switch that has a typical actuating voltage of 28V is sold by Pasternack who has been in business since 1972. Electromechanical relay 28V 7,000 W max power X band waveguide has high CPR Flat standard flanges ports. These WR112 10 GHz aluminum body waveguide relay switches plated in black produce a maximum actuating current of 142 mA at a 28 V nominal operating voltage. 142 mA 7,000 W waveguide electromechanical failsafe relay switch PEWGS6069 by Pasternack has an operating range of 25.2 V to 30.8 V. 7.05 GHz minimum X band 28 V waveguide switches by Pasternack have an industry-leading design that features failsafe actuators with control. Our 7,000 W max input power 25.2 V to 30.8 V waveguide relay switch PEWGS6069 with CPR Flat flanges has an impressive impedance of 50 Ohms. Pasternack WR112 SPDT/DPDT waveguide relay switch that requires a +28 Vdc nominal bias voltage has a -40°C to 85°C operating temperature range. 10 GHz aluminum waveguide standard electromechanical relay switch with 50 Ohms impedance can function under 30psig maximum operating pressure and is fitted with a fully weatherized package of 0-100% humidity. PEWGS6069 Electromechanical WR112 failsafe waveguide switch by Pasternack is a tough aluminum waveguide component that has k cycles minimum of mechanical life. X band Pasternack SPDT/DPDT CPR Flat flanged waveguide relay switch with 1.44 lbs of weight, is 2.43 in. wide, 2.25 in. long, and 4.85 in. high. WR112 28 Vdc 142 mA 7.05 GHz to 10 GHz electromechanical relay switch with maximum 1.1:1 VSWR (voltage standing wave ratio) has Pasternack’s expert technical support always at hand. CAD drawings with dimensions and specs on a downloadable PEWGS6069 PDF datasheet are available on the product page for this WR112 7,000 W 10 GHz waveguide electromechanical relay switch with CPR Flat flanges. Industry-leading electromechanical polarity X band failsafe waveguide that can function under 30psig and temperatures up to 85°C, ships to anywhere globally available the same day. Pasternack’s 1.1:1 VSWR WR112 standard waveguide relay actuating switch has a quick-connect circular dc connector with mate providing 0.05 dB maximum insertion loss and in-stock consistently for your convenience. Electronic warfare and countermeasures, microwave radio, VSAT, space systems, are just a few of the important applications that these Pasternack PEWGS6069 7,000 kW WR112 10 GHz X band waveguides blacks are used in. Ordering is easy, just go online or call our knowledgeable sales team by phone and get this WR112 SPDT/DPDT failsafe switch with 0.05 dB insertion loss and 80 dB of minimum isolation. To summarize, the quality and availability of Pasternack WR112 standard waveguide electromechanical failsafe relay switch with 100,000,000 ns typical switching speed and 250,000k cycles can not be bested. |
| 1 | ||
| PEWGS6031 | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-187, Flange Size Flange Type Flange Group: CPR Flat Flange, Frequency Band: C band, Minimum Frequency: 3.95 GHz, Maximum Frequency: 5.85 GHz, Maximum VSWR: 1.05:1, Switch Design: SPDT/DPDT DPDT, Actuator Type: Latching Actuator, Additional Actuator Feature 1: TTL Logic, Additional Actuator Feature 2: Self Cut Off, Additional Actuator Feature 3: Set Indicators, Additional Actuator Feature 4: Manual Override. WR-187 Waveguide Electromechanical Relay SPDT/DPDT Latching Switch, C Band 5.85 GHz, 22,000 Watts, CPR Flat, 12V, TTL Logic, Self Cut Off., WR187 waveguide electromechanical relay switch PEWGS6031 is part of Pasternack’s international ISO 9001:2008 certified facility same-day shipping program. Manufactured as SPDT and interchangeable DPDT settings, WR187 electromechanical waveguides are relay switches with latching actuators. Pasternack innovative SPDT/DPDT WR187 gold-plated electromechanical switches are always in stock and have a 22,000 Watt maximum input power rating 22,000 watts latching aluminum waveguide relay switch PEWGS6031 can operate in the ultra-wide C band frequency range of 3.95 GHz to 5.85 GHz. 5.85 GHz max WR187 22,000 watt waveguide electromechanical relay switch that has a typical actuating voltage of 12V is sold by Pasternack who has been in business since 1972. Electromechanical relay 12V 22,000 W max power C band waveguide has high CPR Flat flanges ports. These WR187 5.85 GHz aluminum body waveguide relay switches plated in gold produce a maximum actuating current of mA at a 12 V nominal operating voltage. mA 22,000 W waveguide electromechanical latching relay switch PEWGS6031 by Pasternack has an operating range of 10 V to 20 V. The patented motor drive housings for PEWGS6031 C band electromechanical relay switches at 12 V with manual override control ttl-logic latching actuators support a removable cover for set indicators and a self cut off for the position indicator. Pasternack WR187 SPDT/DPDT waveguide relay switch that requires a +12 Vdc nominal bias voltage has a -40°C to 85°C operating temperature range. 5.85 GHz aluminum waveguide electromechanical relay switch can function under 30psig maximum operating pressure and is fitted with a fully weatherized package of 0-100% humidity. PEWGS6031 Electromechanical WR187 latching waveguide switch by Pasternack is a tough aluminum waveguide component that has k cycles minimum of mechanical life. C band Pasternack SPDT/DPDT CPR Flat flanged waveguide relay switch with 2.76 lbs of weight, is 0 in. wide, 0 in. long, and 0 in. high. WR187 12 Vdc mA 3.95 GHz to 5.85 GHz electromechanical relay switch with maximum 1.05:1 VSWR (voltage standing wave ratio) has Pasternack’s expert technical support always at hand. CAD drawings with dimensions and specs on a downloadable PEWGS6031 PDF datasheet are available on the product page for this WR187 22,000 W 5.85 GHz waveguide electromechanical relay switch with CPR Flat flanges. Industry-leading electromechanical polarity C band latching waveguide that can function under 30psig and temperatures up to 85°C, ships to anywhere globally available the same day. Pasternack’s 1.05:1 VSWR WR187 waveguide relay actuating switch has a quick-connect circular dc connector with mate providing 0.002 dB maximum insertion loss and in-stock consistently for your convenience. Electronic warfare and countermeasures, microwave radio, VSAT, space systems, are just a few of the important applications that these Pasternack PEWGS6031 22,000 kW WR187 5.85 GHz C band waveguides golds are used in. Ordering is easy, just go online or call our knowledgeable sales team by phone and get this WR187 SPDT/DPDT latching switch with 0.002 dB insertion loss and 80 dB of minimum isolation. To summarize, the quality and availability of Pasternack WR187 waveguide electromechanical latching relay switch with 150,000,000 ns typical switching speed and 250,000k cycles can not be bested. |
| 1 | ||
| PE3W14686/HS-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. 2.92mm Male to BNC Male Cable 60 Inch Length Using PE-047SR Coax with HeatShrink., Radio frequency assembly 2.92mm male to BNC male cable 60 inch length using PE-047SR coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to BNC male cable 60 inch length using PE-047SR coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm cable connection on one end and a BNC cable connection on the other. Our 2.92mm to BNC cable assembly has a male gender on end 1 and a male on end 2. PE3W14686/HS-60 can also be known as a 2.92mm plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.05-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The semi-rigid RF cable has a between series connection. Our 2.92mm male to BNC male cable has a maximum VSWR of 1.4:1. 2.92mm plug to BNC plug cable assembly PE3W14686/HS-60 is built with PE-047SR which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to BNC cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the clamp/solder attachment method, while the other has the solder/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W14686/HS-60 can also be used in the other direction and will be a BNC male to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to BNC cable assembly for quick shipment worldwide. Variations of 2.92mm and BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to BNC RF cable assembly as per your requirements. |
| 0 | ||
| PEWGS6032 | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-159, Flange Size Flange Type Flange Group: CPR Flat Flange, Frequency Band: C band, Minimum Frequency: 4.9 GHz, Maximum Frequency: 7.05 GHz, Maximum VSWR: 1.1:1, Switch Design: SPDT/DPDT DPDT, Actuator Type: Latching Actuator, Additional Actuator Feature 1: Self Cut Off, Additional Actuator Feature 2: Set Indicators, Additional Actuator Feature 3: Manual Override, Additional Actuator Feature 4: Viewing Window. WR-159 Waveguide Electromechanical Relay SPDT/DPDT Latching Switch, C Band 7.05 GHz, 12,000 Watts, CPR Flat, 28V, Self Cut Off., WR159 waveguide electromechanical relay switch PEWGS6032 is part of Pasternack’s international ISO 9001:2008 certified facility same-day shipping program. Manufactured as SPDT and interchangeable DPDT settings, WR159 electromechanical waveguides are relay switches with latching actuators. Pasternack innovative SPDT/DPDT WR159 gold-plated electromechanical switches are always in stock and have a 12,000 Watt maximum input power rating 12,000 watts latching aluminum waveguide relay switch PEWGS6032 can operate in the ultra-wide C band frequency range of 4.9 GHz to 7.05 GHz. 7.05 GHz max WR159 12,000 watt waveguide electromechanical relay switch that has a typical actuating voltage of 28V is sold by Pasternack who has been in business since 1972. Electromechanical relay 28V 12,000 W max power C band waveguide has high CPR Flat flanges ports. These WR159 7.05 GHz aluminum body waveguide relay switches plated in gold produce a maximum actuating current of mA at a 28 V nominal operating voltage. mA 12,000 W waveguide electromechanical latching relay switch PEWGS6032 by Pasternack has an operating range of 21 V to 32 V. The patented motor drive housings for PEWGS6032 C band electromechanical relay switches at 28 V with viewing window control self-cut-off latching actuators support a removable cover for manual override and a set indicators for the position indicator. Pasternack WR159 SPDT/DPDT waveguide relay switch that requires a +28 Vdc nominal bias voltage has a -40°C to 85°C operating temperature range. 7.05 GHz aluminum waveguide electromechanical relay switch can function under 30psig maximum operating pressure and is fitted with a fully weatherized package of 0-100% humidity. PEWGS6032 Electromechanical WR159 latching waveguide switch by Pasternack is a tough aluminum waveguide component that has k cycles minimum of mechanical life. C band Pasternack SPDT/DPDT CPR Flat flanged waveguide relay switch with 2.54 lbs of weight, is 0 in. wide, 0 in. long, and 0 in. high. WR159 28 Vdc mA 4.9 GHz to 7.05 GHz electromechanical relay switch with maximum 1.1:1 VSWR (voltage standing wave ratio) has Pasternack’s expert technical support always at hand. CAD drawings with dimensions and specs on a downloadable PEWGS6032 PDF datasheet are available on the product page for this WR159 12,000 W 7.05 GHz waveguide electromechanical relay switch with CPR Flat flanges. Industry-leading electromechanical polarity C band latching waveguide that can function under 30psig and temperatures up to 85°C, ships to anywhere globally available the same day. Pasternack’s 1.1:1 VSWR WR159 waveguide relay actuating switch has a quick-connect circular dc connector with mate providing 0.06 dB maximum insertion loss and in-stock consistently for your convenience. Electronic warfare and countermeasures, microwave radio, VSAT, space systems, are just a few of the important applications that these Pasternack PEWGS6032 12,000 kW WR159 7.05 GHz C band waveguides golds are used in. Ordering is easy, just go online or call our knowledgeable sales team by phone and get this WR159 SPDT/DPDT latching switch with 0.06 dB insertion loss and 70 dB of minimum isolation. To summarize, the quality and availability of Pasternack WR159 waveguide electromechanical latching relay switch with 150,000,000 ns typical switching speed and 250,000k cycles can not be bested. |
| 0 | ||
| PE3W02183/HS-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to TNC Male Right Angle Low Loss Cable 60 Inch Length Using LMR-400 Coax with HeatShrink., Radio frequency assembly N male to TNC male right angle low loss cable 60 inch length using LMR-400 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to TNC male right angle low loss cable 60 inch length using LMR-400 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle TNC cable connection on the other. Our low loss type N to right angle TNC cable assembly has a male gender on end 1 and a male on end 2. PE3W02183/HS-60 can also be known as a low loss type N plug to right angle TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W02183/HS-60 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to right angle TNC male cable has a maximum VSWR of 1.4:1. Type N plug to TNC plug cable assembly PE3W02183/HS-60 is built with LMR-400 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W02183/HS-60 can also be used in the other direction and will be a right angle TNC male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to TNC right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W07265/HS-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. TNC Male to SMA Male Right Angle Low Loss Cable 60 Inch Length Using LMR-200 Coax with HeatShrink., Radio frequency assembly TNC male to SMA male right angle low loss cable 60 inch length using LMR-200 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to SMA male right angle low loss cable 60 inch length using LMR-200 coax with heatshrink, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and right angle SMA cable connection on the other. Our low loss TNC to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W07265/HS-60 can also be known as a low loss TNC plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. TNC plug to SMA plug cable assembly PE3W07265/HS-60 is built with LMR-200 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency TNC male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W07265/HS-60 can also be used in the other direction and will be right angle SMA male to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to SMA male right angle low loss cable 60 inch length using LMR-200 coax with heatshrink. |
| 0 | ||
| PE71S6060 | Pasternack Enterprises | Key Specifications, Connector Series: SMA, Connector Gender: Female, Switch Design: SPDT, Minimum Frequency: DC, Maximum Frequency: 18 GHz, Impedance: 50 Ohm, Maximum Input Power (CW): 100 Watts, Maximum VSWR: 1.5:1, Maximum Insertion Loss: 0.5 dB, Minimum Isolation: 60 dB. SPDT Electromechanical Relay Failsafe Switch, Terminated, DC to 18 GHz, up to 240W, 28V, SMA. PE71S6060 electromechanical RF relay switch from Pasternack is a SPDT design. Our SPDT electromechanical RF switch uses SMA connectors at 50 Ohm. This SMA RF relay SPDT switch has a maximum frequency of 18 GHz and maximum power of 100 Watts. The Pasternack radio frequency SPDT SMA electro-mechanical relay switch is rated at a control voltage of 28 Volts, indicator voltage and switching speed of 10ms. SMA SPDT electro mechanical RF relay switch features with an isolation minimum of 60 dB. SPDT electromechanical relay radio frequency switch PE71S6060 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our SPDT SMA coaxial RF relay electromechanical switch can ship worldwide the same day that it is bought as with our other available RF parts. |
| 0 | ||
| PE71S6097 | Pasternack Enterprises | Key Specifications, Connector Series: SMA, Connector Gender: Female, Switch Design: SPDT, Minimum Frequency: DC, Maximum Frequency: 26.5 GHz, Impedance: 50 Ohm, Maximum Input Power (CW): 20 Watts, Maximum VSWR: 1.5:1, Maximum Insertion Loss: 0.5 dB, Minimum Isolation: 50 dB. SPDT Electromechanical Relay Failsafe Switch, DC to 26.5 GHz, 20W, 28V TTL, Diodes, Indicators, SMA. PE71S6097 electromechanical RF relay switch from Pasternack is a SPDT design. Our SPDT electromechanical RF switch uses SMA connectors at 50 Ohm. This SMA RF relay SPDT switch has a maximum frequency of 26.5 GHz and maximum power of 20 Watts. The Pasternack radio frequency SPDT SMA electro-mechanical relay switch is rated at a control voltage of 28 Volts, indicator voltage and switching speed of 35ms. SMA SPDT electro mechanical RF relay switch features TTL Logic, Diodes, Indicators with an isolation minimum of 50 dB. SPDT electromechanical relay radio frequency switch PE71S6097 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our SPDT SMA coaxial RF relay electromechanical switch can ship worldwide the same day that it is bought as with our other available RF parts. |
| 0 | ||
| PEWGS6068 | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-112, Waveguide Type: Standard, Flange Size Flange Type Flange Group: CPR Flat Standard Flange, Frequency Band: X band, Minimum Frequency: 7.05 GHz, Maximum Frequency: 10 GHz, Impedance: 50 Ohms, Maximum VSWR: 1.1:1, Switch Design: SPDT/DPDT DPDT, Actuator Type: Failsafe Actuator, Additional Actuator Feature 1: Window Indicator, Additional Actuator Feature 2: Manual Override. WR-112 Waveguide Electromechanical Relay SPDT/DPDT Failsafe Switch, X Band 10 GHz, 7,000 Watts, CPR Flat, 12V, Window Indicator., WR112 standard waveguide electromechanical relay switch PEWGS6068 is part of Pasternack’s international ISO 9001:2008 certified facility same-day shipping program. Manufactured as SPDT and interchangeable DPDT settings, WR112 standard electromechanical waveguides are relay switches with failsafe actuators. Pasternack innovative SPDT/DPDT WR112 black-plated electromechanical switches are always in stock and have a 7,000 Watt maximum input power rating with a 202 KW peak power rating. 7,000 watts failsafe aluminum waveguide relay switch PEWGS6068 can operate in the ultra-wide X band frequency range of 7.05 GHz to 10 GHz. 10 GHz max WR112 7,000 watt waveguide electromechanical relay switch that has a typical actuating voltage of 12V is sold by Pasternack who has been in business since 1972. Electromechanical relay 12V 7,000 W max power X band waveguide has high CPR Flat standard flanges ports. These WR112 10 GHz aluminum body waveguide relay switches plated in black produce a maximum actuating current of 250 mA at a 12 V nominal operating voltage. 250 mA 7,000 W waveguide electromechanical failsafe relay switch PEWGS6068 by Pasternack has an operating range of 10.8 V to 13.2 V. 7.05 GHz minimum X band 12 V waveguide switches by Pasternack have an industry-leading design that features failsafe actuators with control. Our 7,000 W max input power 10.8 V to 13.2 V waveguide relay switch PEWGS6068 with CPR Flat flanges has an impressive impedance of 50 Ohms. Pasternack WR112 SPDT/DPDT waveguide relay switch that requires a +12 Vdc nominal bias voltage has a -40°C to 85°C operating temperature range. 10 GHz aluminum waveguide standard electromechanical relay switch with 50 Ohms impedance can function under 30psig maximum operating pressure and is fitted with a fully weatherized package of 0-100% humidity. PEWGS6068 Electromechanical WR112 failsafe waveguide switch by Pasternack is a tough aluminum waveguide component that has k cycles minimum of mechanical life. X band Pasternack SPDT/DPDT CPR Flat flanged waveguide relay switch with 1.44 lbs of weight, is 2.43 in. wide, 2.25 in. long, and 4.85 in. high. WR112 12 Vdc 250 mA 7.05 GHz to 10 GHz electromechanical relay switch with maximum 1.1:1 VSWR (voltage standing wave ratio) has Pasternack’s expert technical support always at hand. CAD drawings with dimensions and specs on a downloadable PEWGS6068 PDF datasheet are available on the product page for this WR112 7,000 W 10 GHz waveguide electromechanical relay switch with CPR Flat flanges. Industry-leading electromechanical polarity X band failsafe waveguide that can function under 30psig and temperatures up to 85°C, ships to anywhere globally available the same day. Pasternack’s 1.1:1 VSWR WR112 standard waveguide relay actuating switch has a quick-connect circular dc connector with mate providing 0.05 dB maximum insertion loss and in-stock consistently for your convenience. Electronic warfare and countermeasures, microwave radio, VSAT, space systems, are just a few of the important applications that these Pasternack PEWGS6068 7,000 kW WR112 10 GHz X band waveguides blacks are used in. Ordering is easy, just go online or call our knowledgeable sales team by phone and get this WR112 SPDT/DPDT failsafe switch with 0.05 dB insertion loss and 80 dB of minimum isolation. To summarize, the quality and availability of Pasternack WR112 standard waveguide electromechanical failsafe relay switch with 125,000,000 ns typical switching speed and 250,000k cycles can not be bested. |
| 0 | ||
| PE3C8998/HS-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-200-FR, RF Cable Type: LMR-200-FR, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male Right Angle to N Male Low Loss Cable 60 Inch Length Using LMR-200-FR Coax with HeatShrink., Radio frequency assembly N male right angle to N male low loss cable 60 inch length using LMR-200-FR coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to N male low loss cable 60 inch length using LMR-200-FR coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle type N cable connection on one end and a type N cable connection on the other. Our low loss right angle type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8998/HS-60 can also be known as a low loss right angle type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C8998/HS-60 RF cable has a FRPE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 165 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. Our right angle type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C8998/HS-60 is built with LMR-200-FR which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with right angle type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C8998/HS-60 can also be used in the other direction and will be a type N male to right angle type N male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
![]() Vyrian | ZXMS6004DT8TA | Diodes Incorporated | Small Signal Field-Effect Transistor, 0.0009A I(D), 60V, 2-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET | 18,012 | ||
| ZXMS6005SGQTA | Diodes Incorporated | Small Signal Field-Effect Transistor, 60V, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET | 17,207 | |||
| ZXMS6002GQTA | Diodes Incorporated | Power Field-Effect Transistor, 1.4A I(D), 60V, 0.675ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET | 16,672 | |||
| ZXMS6006DT8QTA | Diodes Incorporated | Small Signal Field-Effect Transistor, 60V, 2-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET | 15,946 | |||
| ZXMS6004DT8QTA | Diodes Incorporated | Small Signal Field-Effect Transistor, 60V, 2-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET | 15,809 | |||
| XS608B1PAM12 | Schneider Electric | Sensors/Detector Modules RoHS : Compliant | 13,518 | |||
| V27ZS60PX10 | Littelfuse Inc | Varistor, 22V, 120J, Through Hole Mount RoHS : Compliant | 11,318 | |||
| ZXMS6004SGQTA | Diodes Incorporated | Small Signal Field-Effect Transistor, 60V, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET | 10,617 | |||
| ZXMS6004DN8-13 | Diodes Incorporated | Power Field-Effect Transistor, 60V, 0.6ohm, 2-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET | 9,555 | |||
| ZXMS6001N3QTA | Diodes Incorporated | Small Signal Field-Effect Transistor, 1.1A I(D), 60V, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET | 8,287 | |||
| XG5S-6022 | OMRON Corporation | Board Connector, 60 Contact(s), 1 Row(s), Female, IDC Terminal RoHS : Compliant | 6,855 | |||
| ZXMS6006DGQTA | Diodes Incorporated | Power Field-Effect Transistor, 60V, 0.125ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET | 6,336 | |||
| ZXMS6006SGQTA | Diodes Incorporated | Small Signal Field-Effect Transistor, 60V, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET | 5,898 | |||
| ZS-HLDS602M | OMRON Corporation | Diffuse Photoelectric Sensor, 250mm Min, 950mm Max, Rectangular, Board Mount RoHS : Compliant | 5,876 | |||
| XG4S-6004 | OMRON Corporation | Connector Accessory, Strain Relief, Polyamide RoHS : Compliant | 5,248 | |||
![]() Waytek, Inc. | FMS-60 | Eaton Electronics | Bussmann FMS Series Slotted Cartridge Fuse 60A 32VDC |
| 129 | |
![]() Win Source Electronics | MPZ1608S601ATA00 | TDK Corporation | FERRITE BEAD 600 OHM 0603 1LN / Ferrite Beads Multi-Layer 600Ohm 25% 100MHz 1A 0.15Ohm DCR 0603 T/R RoHS : Compliant |
| 893,140 | |
| KGM15CS60E107MT | Kyocera AVX Components | 0603 X6S 100UF +-20% 2.5V |
| 111,380 | ||
| VLS6045EX-221M | TDK Corporation | Wound Ferrite | FIXED IND 220UH 500MA 1.495 OHM RoHS : Compliant |
| 91,500 | ||
TPS60151DRVR![]() | Texas Instruments | Charge Pump STPUP 5V 140mA 6-Pin WSON EP T/R / IC REG SWTCHD CAP 5V 0.14A 6SON RoHS : Compliant |
| 60,000 | ||
TPS60400DBV![]() | Texas Instruments | UNREGULATED 60-mA CHARGE PUMP VOLTAGE INVERTER |
| 55,000 | ||
| BT136S-600D | Nexperia | Triacs logic level |
| 50,000 | ||
| BSS606NH6327 | Infineon Technologies AG | BSS606 - 250V-600V SMALL SIGNAL RoHS : Compliant |
| 36,225 | ||
| BKP2125HS600-T | TAIYO YUDEN | FERRITE BEAD 60 OHM 0805 1LN RoHS : Compliant |
| 28,868 | ||
TPS60402DBV![]() | Texas Instruments | Charge Pump Voltage Inverter 1.6V-5.5V Input SOT-23-5 |
| 3,296 | ||
TPS60402DBVTG4![]() | Texas Instruments | IC REG CHG PUMP INV 60MA SOT23-5 RoHS : Compliant |
| 3,120 | ||
TPS60402DBVRG4![]() | Texas Instruments | UNREGULATED 60-mA CHARGE PUMP VOLTAGE INVERTER RoHS : Compliant |
| 3,100 | ||
TPS60402DBVT![]() | Texas Instruments | IC REG SWTCHD CAP INV 60MA SOT23 RoHS : Compliant |
| 3,040 | ||
TPS60402DBVR![]() | Texas Instruments | IC REG SWTCHD CAP INV 60MA SOT23 / Charge Pump INV -1.6V to -5.25V 60mA 5-Pin SOT-23 T/R RoHS : Compliant |
| 3,000 | ||
| DSPIC33FJ64GS606-50I/PT | Microchip Technology Inc | IC MCU 16BIT 64KB FLASH 64TQFP RoHS : Compliant |
| 2,326 | ||
| CS60-16IO1 | IXYS Integrated Circuits Division | SCR 1.6KV 75A PLUS247-3 |
| 1,701 |
| ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |