W0805R-RJI Price, 販売店, Stock

Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. Limited Detent SMP Male Bulkhead to SMP Female Right Angle Cable 18 Inch Length Using RG405 Coax., Radio frequency assembly limited detent SMP male bulkhead to SMP female right angle cable 18 inch length using RG405 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Limited detent SMP male bulkhead to SMP female right angle cable 18 inch length using RG405 coax, SMP cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMP bulkhead cable connection on one end and right angle SMP cable connection on the other. Our SMP to right angle SMP cable assemblies have a male gender on end 1 and female on end 2. PE3W08176-18 can also be known as a SMP plug to right angle SMP jack cable assembly and will be shipped same-day as it is purchased. SMP plug to SMP jack cable assembly PE3W08176-18 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with SMP to right angle SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMP male bulkhead to SMP right angle female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08176-18 can also be used in the other direction and will be right angle SMP female to SMP male bulkhead cable assembly if the opposite connectivity is required. SMP plug bulkhead to SMP right angle jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this limited detent SMP male bulkhead to SMP female right angle cable 18 inch length using RG405 coax.

1 : $181.99
25 : $172.89
50 : $163.79
100 : $156.51

110

PE3W08119-200CM

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. N Male to QMA Male Right Angle Cable 200 cm Using LMR-240-UF Coax., Radio frequency assembly N male to QMA male right angle cable 200 cm using LMR-240-UF coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N male to QMA male right angle cable 200 cm using LMR-240-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to QMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and right angle QMA cable connection on the other. Our low loss N type to right angle QMA cable assemblies have a male gender on end 1 and male on end 2. This type N to QMA cable is a male to male coax assembly, PE3W08119-200CM, can also be known as a low loss N type plug to right angle QMA plug cable assembly and will be shipped same-day as it is purchased. Type N plug to QMA plug cable assembly PE3W08119-200CM is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle QMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to QMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08119-200CM can also be used in the other direction and will be right angle QMA male to N type male cable assembly if the opposite connectivity is required. Low loss type N plug to QMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to QMA cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to QMA male right angle cable 200 cm using LMR-240-UF coax.

1 : $96.99
25 : $92.14
50 : $87.29
100 : $83.41

103

PE3W08060-50CM

Pasternack Enterprises

Key Specifications, Connector Series 1: 3.5mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.92mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402AL, RF Cable Type: PE-SR402AL, RF Cable Impedance: 50 Ohm, Length: 19.68 inches. 3.5mm Female to 2.92mm Male Cable 50 cm Using PE-SR402AL Coax., Radio frequency assembly 3.5mm female to 2.92mm male cable 50 cm using PE-SR402AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 3.5mm female to 2.92mm male cable 50 cm using PE-SR402AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 3.5mm to 2.92mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 3.5mm cable connection on one end and 2.92mm cable connection on the other. Our 3.5mm to 2.92mm cable assemblies have a female gender on end 1 and male on end 2. This 3.5mm to 2.92mm cable is a female to male coax assembly, PE3W08060-50CM, can also be known as a 3.5mm jack to 2.92mm plug cable assembly and will be shipped same-day as it is purchased. 3.5mm jack to 2.92mm plug cable assembly PE3W08060-50CM is built with PE-SR402AL which is a semi-rigid coax type. The Pasternack semi-rigid 3.5mm cable assembly is manufactured with 3.5mm to 2.92mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 36 GHz maximum frequency 3.5mm female to 2.92mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08060-50CM can also be used in the other direction and will be 2.92mm male to 3.5mm female cable assembly if the opposite connectivity is required. 3.5mm jack to 2.92mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 3.5mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 3.5mm female to 2.92mm male cable 50 cm using PE-SR402AL coax.

1 : $253.99
25 : $241.29
50 : $228.59
100 : $218.43

PE3W08033

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. SMA Male to SMB Jack Cable Using RG174 Coax. PE3W08033 is a SMA male to SMB jack cable using RG174 coax. This Pasternack SMA male to SMB jack cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMB for connector 2. Our male SMA to jack SMB cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08033 SMA male to SMB jack cable assembly is constructed with RG174 coax.

PE3W08074LF/HS-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. BNC Male to Push-On SMP Female Right Angle Cable 48 Inch Length Using RG316 Coax with HeatShrink, LF Solder., Radio frequency assembly BNC male to push-on SMP female right angle cable 48 inch length using RG316 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC male to push-on SMP female right angle cable 48 inch length using RG316 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BNC cable connection on one end and a right angle SMP cable connection on the other. Our BNC to right angle SMP cable assembly has a male gender on end 1 and a female on end 2. PE3W08074LF/HS-48 can also be known as a BNC plug to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3W08074LF/HS-48 RF cable has a FEP jacket of 0.102-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has a between series connection. Our BNC male to right angle SMP female cable has a maximum VSWR of 1.4:1. BNC plug to SMP jack cable assembly PE3W08074LF/HS-48 is built with RG316 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to right angle SMP cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the crimp/crimp attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W08074LF/HS-48 can also be used in the other direction and will be a right angle SMP female to BNC male cable assembly if the opposite connectivity is required. BNC plug to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to SMP cable assembly for quick shipment worldwide. Variations of BNC and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to SMP RF cable assembly as per your requirements.

1 : $74.99
25 : $71.24
50 : $67.49
100 : $64.49

PE3W08084/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Cable Using RG405 Coax with HeatShrink. PE3W08084/HS is a SMA male to SMA male cable using RG405 coax. This Pasternack SMA male to SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to male SMA cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W08084/HS SMA male to SMA male cable assembly is constructed with RG405 coax.

PE3W08114

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm. TNC Male Right Angle to MCX Plug Cable Using PE-SR405AL Coax. PE3W08114 is a TNC male right angle to MCX plug cable using PE-SR405AL coax. This Pasternack TNC male right angle to MCX plug cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm MCX for connector 2. TNC right angle to MCX coaxial cable assembly uses 90 degree right angle coax cable connector. Our male TNC right angle to plug MCX cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W08114 TNC male right angle to MCX plug cable assembly is constructed with PE-SR405AL coax.

PE3W08196

Pasternack Enterprises

Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. SMB Plug to SMA Male Right Angle Cable Using PE-SR405FL Coax. PE3W08196 is a SMB plug to SMA male right angle cable using PE-SR405FL coax. This Pasternack SMB plug to SMA male right angle cable assembly uses a 50 Ohm SMB for connector 1 and a 50 Ohm SMA for connector 2. SMB to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug SMB to male SMA right angle cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W08196 SMB plug to SMA male right angle cable assembly is constructed with PE-SR405FL coax.

PE3W08203LF-200CM

Pasternack Enterprises

Key Specifications, Connector Series 1: MCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. MCX Plug to SMA Female Cable 200 cm Length Using LMR-100 Coax, LF Solder., Radio frequency assembly MCX plug to SMA female cable 200 cm length using LMR-100 coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MCX plug to SMA female cable 200 cm length using LMR-100 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MCX to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MCX cable connection on one end and SMA cable connection on the other. Our MCX to SMA cable assemblies have a plug gender on end 1 and female on end 2. This MCX to SMA cable is a plug to female coax assembly, PE3W08203LF-200CM, can also be known as a MCX male to SMA jack cable assembly and will be shipped same-day as it is purchased. MCX male to SMA jack cable assembly PE3W08203LF-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with MCX to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency MCX plug to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08203LF-200CM can also be used in the other direction and will be SMA female to MCX plug cable assembly if the opposite connectivity is required. MCX male to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MCX to SMA cable assembly for quick shipment worldwide. Variations of MCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MCX plug to SMA female cable 200 cm length using LMR-100 coax, LF solder.

1 : $105.99
25 : $100.69
50 : $95.39
100 : $91.15

PE3W08217-100CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.370079 inches. Push-On SMP Female Right Angle to SMA Female Bulkhead Low Loss Cable 100 CM Length Using LMR-100 Coax., Radio frequency assembly push-on SMP female right angle to SMA female bulkhead low loss cable 100 cm length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Push-on SMP female right angle to SMA female bulkhead low loss cable 100 cm length using LMR-100 coax, SMP cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle SMP cable connection on one end and SMA bulkhead cable connection on the other. Our low loss right angle SMP to SMA cable assemblies have a female gender on end 1 and female on end 2. This SMP to SMA cable is a female to female coax assembly, PE3W08217-100CM, can also be known as a low loss right angle SMP jack to SMA jack cable assembly and will be shipped same-day as it is purchased. SMP jack to SMA jack cable assembly PE3W08217-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMP cable assembly is manufactured with right angle SMP to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMP right angle female to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08217-100CM can also be used in the other direction and will be SMA female bulkhead to right angle SMP female cable assembly if the opposite connectivity is required. Low loss SMP right angle jack to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMA cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this push-on SMP female right angle to SMA female bulkhead low loss cable 100 cm length using LMR-100 coax.

1 : $103.99
25 : $98.79
50 : $93.59
100 : $89.43

PE3W08234LF/HS-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: HN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: PE-C195, RF Cable Type: PE-C195, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. N Female to HN Male Low Loss Cable 48 Inch Length Using PE-C195 Coax with HeatShrink, LF Solder., Radio frequency assembly N female to HN male low loss cable 48 inch length using PE-C195 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N female to HN male low loss cable 48 inch length using PE-C195 coax with heatshrink, LF solder, N type cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to HN cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and HN cable connection on the other. Our low loss type N to HN cable assemblies have a female gender on end 1 and male on end 2. This N type to HN cable is a female to male coax assembly, PE3W08234LF/HS-48, can also be known as a low loss type N jack to HN plug cable assembly and will be shipped same-day as it is purchased. Type N jack to HN plug cable assembly PE3W08234LF/HS-48 is built with PE-C195 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to HN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this type N female to HN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08234LF/HS-48 can also be used in the other direction and will be HN male to type N female cable assembly if the opposite connectivity is required. Low loss type N jack to HN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to HN cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female to HN male low loss cable 48 inch length using PE-C195 coax with heatshrink, LF solder.

1 : $157.99
25 : $150.09
50 : $142.19
100 : $135.87

PE3W08240

Pasternack Enterprises

PE3W08277

Pasternack Enterprises

PE3W08321

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Right Angle Cable Using RG188 Coax. PE3W08321 is a SMA male to SMA male right angle cable using RG188 coax. This Pasternack SMA male to SMA male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08321 SMA male to SMA male right angle cable assembly is constructed with RG188 coax.

PE3W08325-12

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR047AL, RF Cable Type: PE-SR047AL, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Female 4 Hole Flange to BNC Female 4 Hole Flange Cable 12 Inch Using PE-SR047AL Coax., Radio frequency assembly SMA female 4 hole flange to BNC female 4 hole flange cable 12 inch using PE-SR047AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female 4 hole flange to BNC female 4 hole flange cable 12 inch using PE-SR047AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA 4 hole flange cable connection on one end and BNC 4 hole flange cable connection on the other. Our SMA to BNC cable assemblies have a female gender on end 1 and female on end 2. This SMA to BNC cable is a female to female coax assembly, PE3W08325-12, can also be known as a SMA jack to BNC jack cable assembly and will be shipped same-day as it is purchased. SMA jack to BNC jack cable assembly PE3W08325-12 is built with PE-SR047AL which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 2 GHz maximum frequency SMA female 4 hole flange to BNC female 4 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08325-12 can also be used in the other direction and will be BNC female 4 hole flange to SMA female 4 hole flange cable assembly if the opposite connectivity is required. SMA jack 4 hole flange to BNC jack 4 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female 4 hole flange to BNC female 4 hole flange cable 12 inch using PE-SR047AL coax.

1 : $137.99
25 : $131.09
50 : $124.19
100 : $118.67

Vyrian

CRCW0805249KFKEAHP

Vishay Intertechnologies

Fixed Resistor, Metal Glaze/thick Film, 0.5W, 249000ohm, 150V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0805
RoHS : Compliant

18,119

AECW0801C03S-3000S

Abracon Corporation

RF/Microwave Antenna, 698MHz Min, 960MHz Max
RoHS : Compliant

16,286

CRCW0805499RFKEA

Vishay Intertechnologies

Fixed Resistor, Metal Glaze/thick Film, 0.125W, 499ohm, 150V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0805
RoHS : Compliant

16,103

CRCW080588R7FKEAC

Vishay Intertechnologies

Fixed Resistor, Metal Glaze/thick Film, 0.125W, 88.7ohm, 150V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0805
RoHS : Compliant

13,696

DW-08-15-T-S-295

Samtec Inc

Board Stacking Connector, 8 Contact(s), 1 Row(s), Male, Straight, 0.1 inch Pitch, Solder Terminal, Locking, Black Insulator
RoHS : Compliant

12,387

CRCW080528K0FKEB

Vishay Intertechnologies

Fixed Resistor, Metal Glaze/thick Film, 0.125W, 28000ohm, 150V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0805
RoHS : Compliant

11,604

DW-08-11-F-D-665

Samtec Inc

Board Stacking Connector, 16 Contact(s), 2 Row(s), Male, Straight, 0.1 inch Pitch, Solder Terminal, Locking, Black Insulator
RoHS : Compliant

10,503

DW-08-11-G-D-600

Samtec Inc

Board Stacking Connector, 16 Contact(s), 2 Row(s), Male, Straight, 0.1 inch Pitch, Solder Terminal, Locking, Black Insulator
RoHS : Compliant

10,239

CRCW080551K1FKEAHP

Vishay Intertechnologies

Fixed Resistor, Metal Glaze/thick Film, 0.5W, 51100ohm, 150V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0805
RoHS : Compliant

9,283

CRCW08051K80JNEAIF

Vishay Intertechnologies

Fixed Resistor, Metal Glaze/thick Film, 0.125W, 1800ohm, 150V, 5% +/-Tol, 200ppm/Cel, Surface Mount, 0805
RoHS : Compliant

825

M850491921W08

Souriau-sunbank Connection Technologies

Circular Conn Accessory, Backshell, Aluminum Alloy

810

CRCW0805100RFKTC

Vishay Draloric

Fixed Resistor, Metal Glaze/thick Film, 0.125W, 100ohm, 150V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0805

776

CRCW08050000Z0EAE0

Vishay Intertechnologies

Metal Glaze/thick Film, 0.125W, 0ohm, Surface Mount, 0805
RoHS : Compliant

617

TNPW0805102KBETA

Vishay Intertechnologies

Fixed Resistor, Thin Film, 0.125W, 102000ohm, 150V, 0.1% +/-Tol, 25ppm/Cel, Surface Mount, 0805
RoHS : Not Compliant

456

MC0.1W08051%2K74

Multicomp Pro

Fixed Resistor, Metal Glaze/thick Film, 0.1W, 2740ohm, 150V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0805

422

Win Source Electronics

CRCW080515K0FKEA

Vishay Huntington

RES SMD 15K OHM 1% 1/8W 0805

31,580 : $0.0106
23,810 : $0.0118
18,350 : $0.0122
13,275 : $0.0127
8,625 : $0.013
3,525 : $0.0159

990,000

CRCW080510R0FKEA

Vishay Huntington

RES SMD 10 OHM 1% 1/8W 0805

46,875 : $0.0064
34,725 : $0.0072
27,030 : $0.0074
19,485 : $0.0077
12,660 : $0.0079
5,210 : $0.0096

985,698

CRCW080510K0FKEA

Vishay Huntington

RES SMD 10K OHM 1% 1/2W 0805

76,925 : $0.0039
60,980 : $0.0041
47,620 : $0.0042
32,610 : $0.0046
21,280 : $0.0047
10,000 : $0.005

978,288

CRCW0805100RFKEA

Vishay Huntington

RES SMD 100 OHM 1% 1/8W 0805

68,185 : $0.0049
51,025 : $0.0055
39,220 : $0.0057
28,850 : $0.0058
18,520 : $0.006
7,580 : $0.0074

900,000

CRCW08050000Z0EA

Vishay Huntington

RES SMD 0 OHM JUMPER 1/8W 0805

15,310 : $0.0196
11,420 : $0.0219
8,850 : $0.0226
6,415 : $0.0234
4,150 : $0.0241
1,705 : $0.0294

580,554

CRCW08054K70FKEAC

Vishay Huntington

RES 4.7K OHM 1% 1/8W 0805

37,975 : $0.0079
28,410 : $0.0088
21,980 : $0.0091
15,960 : $0.0094
10,310 : $0.0097
4,205 : $0.0119

352,680

CRCW080510R0FKEC

Vishay Huntington

RES SMD 10 OHM 1% 1/8W 0805

19,235 : $0.0175
14,370 : $0.0195
11,115 : $0.0202
8,065 : $0.0208
5,210 : $0.0215
2,150 : $0.0261

120,000

CRCW080510R0FKEAHP

Vishay Huntington

RES SMD 10 OHM 1% 1/2W 0805 / 10 Ohms ±1% 0.5W, 1/2W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200, Pulse Withstanding Thick Film

11,030 : $0.0305
8,255 : $0.0339
6,370 : $0.0352
4,630 : $0.0363
2,990 : $0.0375
1,230 : $0.0457

73,840

CRCW08052K20FKEA

Vishay Huntington

RES SMD 2.2K OHM 1% 1/8W 0805

56,605 : $0.0053
42,375 : $0.0059
32,790 : $0.0061
23,810 : $0.0063
15,385 : $0.0065
6,330 : $0.0079

54,000

CRCW08053K30FKEA

Vishay Huntington

RES SMD 3.3K OHM 1% 1/8W 0805

69,770 : $0.0043
52,085 : $0.0048
40,820 : $0.0049
29,415 : $0.0051
18,870 : $0.0053
7,815 : $0.0064

49,806

CRCW0805470RFKEA

Vishay Huntington

RES SMD 470 OHM 1% 1/8W 0805

34,095 : $0.0088
25,515 : $0.0098
19,610 : $0.0102
14,290 : $0.0105
9,260 : $0.0108
3,790 : $0.0132

30,000

CRCW080533R0JNEAC

Vishay Huntington

RES 33 OHM 5% 1/8W 0805

25,645 : $0.0131
19,235 : $0.0146
14,815 : $0.0151
10,795 : $0.0156
6,945 : $0.0161
2,860 : $0.0196

25,000

CRCW080549R9FKEA

Vishay Huntington

RES SMD 49.9 OHM 1% 1/8W 0805

12,610 : $0.0238
9,400 : $0.0266
7,275 : $0.0275
5,285 : $0.0284
3,415 : $0.0293
1,405 : $0.0357

11,000

FM18W08-SG

Cypress Semiconductor

IC FRAM 256KBIT 70NS 28SOIC / FRAM 256Kbit Parallel Interface 3.3V 28-Pin SOIC Tube
RoHS : Compliant

34 : $8.8637
26 : $9.8864
20 : $10.2273
15 : $10.5682
10 : $10.9091
4 : $13.2955

10,000

CRCW0805100RJNEAHP

Vishay Huntington

RES SMD 100 OHM 5% 1/2W 0805

7,110 : $0.0422
5,310 : $0.0471
4,110 : $0.0487
2,985 : $0.0503
1,930 : $0.0519
790 : $0.0633

5,000

Wuhan P&S

CRCW08055R60JNTA

Vishay Intertechnologies

Lead (Pb)-Bearing Thick Film Chip Resistors
RoHS : Not Compliant

1 : $0.19
100 : $0.07
500 : $0.06
1,000 : $0.06

200,000

CRCW08051K80JNEAHP

Vishay Intertechnologies

Pulse Proof, High Power Thick Film Chip Resistors��1.8 k�� 5% 0.5W
RoHS : Compliant

1 : $0.2
100 : $0.07
500 : $0.07
1,000 : $0.06

95,000

CRCW0805180RFKEA

Vishay Intertechnologies

Standard Thick Film Chip Resistors
RoHS : Compliant

1 : $0.08
100 : $0.03
500 : $0.03
1,000 : $0.03

55,000

CRCW0805150RFKEAHP

Vishay Intertechnologies

CRCW0805-HP 100 150R 1% ET1 E3
RoHS : Compliant

1 : $0.25
100 : $0.09
500 : $0.08
1,000 : $0.08

45,000

CRCW080510R0FKEAHP

Vishay Intertechnologies

Pulse Proof, High Power Thick Film Chip Resistors
RoHS : Compliant

1 : $0.2746
100 : $0.0916
500 : $0.085
1,000 : $0.0824

10,000

W0805R-RJI 販売店

リンク URL