Optically Coupled Isolator

OPI110, OPI1264 Series

© TT electronics plc

Issue C

11/2017

Page 2

TT Electronics | OPTEK Technology

1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200

www.ttelectronics.com | sensors@ttelectronics.com

General Note

TT Electronics reserves the right to make changes in product specification without

notice or liability. All information is subject to TT Electronics’ own data and is

considered accurate at time of going to print.

Storage Temperature

-40° C to +100° C

Operating Temperature

-40° C to +85° C

Input-to-Output Isolation Voltage

(1)(2)

± 15 kVDC

Lead Soldering Temperature (1/16” (1.6 mm) from case for 5 seconds with soldering iron)

(3)

260° C

Input Diode

Forward DC Current

40 mA

Reverse DC Voltage

2 V

Power Dissipation

(4)

50 mW

Output Photosensor

Collector-Emitter Voltage

OPI110, OPI1264

30

Emitter-Collector Voltage

5

Power Dissipation

(5)

100 mW

Notes:

(1)

Measured with input and output leads shorted. Typical input/output capacitance is 0.06 pF.

(2)

UL recognition is for 15kV dc for one minute.

(3)

RMA flux is recommended. The duration can be extended to 10 seconds maximum when flow soldering.

(4)

Derate linearly 0.83 mW/°C above 25°C.

(5)

Derate linearly 1.67 mW/°C above 25°C.

OPI1264

1

4

2

3

OPI110

1

4

2

3