Package Information

www.vishay.com

Vishay Siliconix

Revision: 20-Oct-14

2

Document Number: 67234

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

Notes

1. Use millimeters as the primary measurement

2. Dimensioning and tolerances conform to ASME Y14.5M. - 1994

3. N is the number of terminals,

Nd is the number of terminals in X-direction and

Ne is the number of terminals in Y-direction.

4. Dimension b applies to plated terminal and is measured between 0.20 mm and 0.25 mm from terminal tip

5. The pin #1 identifier must be existed on the top surface of the package by using indentation mark or other feature of package body

6. Exact shape and size of this feature is optional

7. Package warpage max. 0.08 mm

8. Applied only for terminals

T14-0626-Rev. A, 20-Oct-14

DWG: 6028