Preliminary Datasheet

LP6284

Email: marketing@lowpowersemi.com www.lowpowersemi.com

Page 5 of 9

LP6284–00

Version 0.0 AUG.-2016

Absolute Maximum Ratings

Note 1



VIN, LDOI

--------------------------------------------------------------------------------------------------------- -0.3V to +6.5V



LX -------------------------------------------------------------------------------------------------------------------- -0.3V to +16V



LDOO

--------------------------------------------------------------------------------------------------------------



VGHM, VGH, DRN

---------------------------------------------------------------------------------------------

−0.3V to 30V



AVDD

-------------------------------------------------------------------------------------------------------------

−0.3V to 16



OPO, OPI, DRVP -----------------------------------------------------------------------------------------------



VDPM, VFLK, DLY,



℃ to 150℃



Operation Ambient Temperature Range---------------------------------------------------------------- -40°C to +85°C



Storage Temperature Range ------------------------------------------------------------------------------ -65°C to +150°C



Maximum Soldering Temperature (at leads, 10sec) ------------------------------------------------- +260°C



Maximum Junction Temperature ------------------------------------------------------------------------- 150°C

Note 1.

Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress

ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of

the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

Thermal Information



Thermal Resistance

QFN-24 4x4,

θ

JA

---------------------------------------------------------------------------------------------- 56°C/W

ESD Susceptibility



HBM(Human Body Mode)

Note 2

---------------------------------------------------------------------- 2KV



MM(Machine Mode)

Note 3

------------------------------------------------------------------------------ 200V

Note 2.

The Human body model (HBM) is a 100pF capacitor discharged through a 1.5kΩ resistor into each pin. The testing is

done according JEDEC.

Note 3.

Machine Model (MM) is a 200pF capacitor discharged through a 500nH inductor with no series resistor into each pin.

The testing is done according JEDEC.