MP5083 datasheet(3/14 Pages) MPS

3 / 14 page

MP5083

– 5.5V, 2A LOW RDSON LOAD SWITCH WITH CURRENT MONITORING

MP5083 Rev. 1.1

www.MonolithicPower.com

7/12/2017

MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.

ABSOLUTE MAXIMUM RATINGS (1)

VIN.............................................. –0.3V to +6.5V

VCC............................................. –0.3V to +6.5V

VOUT ........................................... –0.3V to +6.5V

EN, SS, IMON .....................

–0.3V to Vcc+0.3 V

Junction Temperature .............................. 150°C

Lead Temperature ................................... 260°C

Continuous Power Dissipation

(2)

QFN12 (2mmx2mm) ..................................1.6W

Recommended Operating Conditions

(3)

Supply Voltage VIN ......................... 0.5V to 5.5V

Supply Voltage VCC ........................... 3V to 5.5V

Output Voltage VOUT....................... 0.5V to 5.5V

Operating Junction Temp ........ -40°C to +125°C

Thermal Resistance

(4)

θJA

θJC

QFN-

12 (2mmx2mm) ……....…80

°C/W

Notes:

1) Exceeding these ratings may damage the device.

2) The maximum allowable power dissipation is a function of the

maximum junction temperature TJ (MAX), the junction-to-

ambient thermal resistance θ

JA, and the ambient temperature

TA. The maximum allowable continuous power dissipation at

any ambient temperature is calculated by PD (MAX) = (TJ

(MAX)-TA)/θJA. Exceeding the maximum allowable power

dissipation will cause excessive die temperature, and the

regulator will go into thermal shutdown. Internal thermal

shutdown circuitry protects the device from permanent

damage.

3) The device is not guaranteed to function outside of its

operating conditions.

4) Measured on JESD51-7, 4-layer PCB.

MP5083 データシート(PDF) 3 Page - Monolithic Power Systems

MP5083 データシート(HTML) 3 Page - Monolithic Power Systems

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14

データシートダウンロード