PD104VT2

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be

distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,

Ltd.

Page:7

Note 5-2 : DENB input signal.

If customer wanted to off the DENB mode , you must keep the DENB (pin 27)

always High or Low.

Note 5-4 : The definitions of U/D & R/L

U/D & R/L (PIN 30)= High

U/D & R/L (PIN 30)= Low

5-2) Backlight driving

Connector type:BHR-03VS-1 (JST) , PIN No 3pin, pitch=4mm

Pin No

Symbol

Description

Remark

1

VL1

Input terminal (Hi voltage side)

Wire color : Pink

2

NC

No Connection

3

VL2

Input terminal (Low voltage side)

Wire Color : White

Note 5-3

Note 5-3 : Low voltage side of backlight inverter connects with ground of inverter circuits.

800 tc

DENB

640 tc