| データシートサーチシステム |
|
FUSB302B10MPX データシート(PDF) 13 Page - ON Semiconductor |
|
|
|||||||||||||||||||||||||||||
FUSB302B10MPX データシート(HTML) 13 Page - ON Semiconductor |
|
13 / 32 page ![]() FUSB302B www.onsemi.com 13 Figure 15. I2C Read Example S WR A A S RD A A A NA P Register address to Read specified Note: 8bits If Register is not specified Master will begin read from current register. In this case only sequence showing in Red bracket is needed Single or multi byte read executed from current register location (Single Byte read is initiated by Master with NA immediately following first data byte) Read Data K+1 Read Data K+N-1 8bits 8bits 8bits Slave Address Register Address K Read Data K Slave Address From Master to Slave S Start Condition NA NOT Acknowledge (SDA High) RD Read =1 From Slave to Master A Acknowledge (SDA Low) WR Write=0 P Stop Condition Table 7. ABSOLUTE MAXIMUM RATINGS Symbol Parameter Min Max Unit VvDD Supply Voltage from VDD −0.5 6.0 V VCC_HDDRP CC pins when configured as Host, Device or Dual Role Port −0.5 6.0 V VVBUS VBUS Supply Voltage −0.5 28 .0 V TSTORAGE Storage Temperature Range −65 +150 °C TJ Maximum Junction Temperature − +150 °C TL Lead Temperature (Soldering, 10 Seconds) − +260 °C ESD Human Body Model, ANSI/ESDA/JEDEC JS−001−2012 4 − kV Charged Device Model, JEDEC JESD22−C101 1 − Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. Table 8. RECOMMENDED OPERATING CONDITIONS Symbol Parameter Min Typ Max Unit VVBUS VBUS Supply Voltage 4.0 5 .0 21 .0 V VVDD VDD Supply Voltage 2.7 (Note 3) 3.3 5.5 V VVCONN VCONN Supply Voltage 2.7 − 5.5 V IVCONN VCONN Supply Current − − 560 mA TA Operating Temperature −40 − +85 °C TA Operating Temperature (Note 11) −40 − +105 °C Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond the Recommended Operating Ranges limits may affect device reliability. 3. This is for functional operation only and not the lowest limit for all subsequent electrical specifications below. All electrical parameters have a minimum of 3.0 V operation. |
|
リンク URL |
| ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |