IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make

changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated

Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to

its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.

The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other

applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical harm, injury, or death to a person or severe

property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice.

For additional information please visit our website at: www.ixysic.com

FDA217

5

Specification: DS-FDA217-R03

©Copyright 2013,

IXYS Integrated Circuits Division

OptoMOS® is a registered trademark of

IXYS Integrated Circuits Division

All rights reserved. Printed in USA.

11/13/2013

Mechanical Dimensions

Dimensions

mm

(inches)

PCB Hole Pattern

2.540 ± 0.127

(0.100 ± 0.005)

6.350 ± 0.127

(0.250 ± 0.005)

9.144 ± 0.508

(0.360 ± 0.020)

0.457 ± 0.076

(0.018 ± 0.003)

9.652 ± 0.381

(0.380 ± 0.015)

7.239 TYP.

(0.285)

7.620 ± 0.254

(0.300 ± 0.010)

4.064 TYP

(0.160)

0.813 ± 0.102

(0.032 ± 0.004)

8-0.800 DIA.

(8-0.031 DIA.)

2.540 ± 0.127

(0.100 ± 0.005)

7.620 ± 0.127

(0.300 ± 0.005)

7.620 ± 0.127

(0.300 ± 0.005)

6.350 ± 0.127

(0.250 ± 0.005)

3.302 ± 0.051

(0.130 ± 0.002)

Pin 1

0.254 ± 0.0127

(0.010 ± 0.0005)

FDA217

Dimensions

mm

(inches)

PCB Land Pattern

2.540 ± 0.127

(0.100 ± 0.005)

9.652 ± 0.381

(0.380 ± 0.015)

6.350 ± 0.127

(0.250 ± 0.005)

9.525 ± 0.254

(0.375 ± 0.010)

0.457 ± 0.076

(0.018 ± 0.003)

0.813 ± 0.102

(0.032 ± 0.004)

4.445 ± 0.127

(0.175 ± 0.005)

7.620 ± 0.254

(0.300 ± 0.010)

0.635 ± 0.127

(0.025 ± 0.005)

0.254 ± 0.0127

(0.010 ± 0.0005)

2.54

(0.10)

8.90

(0.3503)

1.65

(0.0649)

0.65

(0.0255)

3.302 ± 0.051

(0.130 ± 0.002)

Pin 1

FDA217S

Dimensions

mm

(inches)

User Direction of Feed

NOTES:

1. Dimensions carry tolerances of EIA Standard 481-2

2. Tape complies with all “Notes” for constant dimensions listed on page 5 of EIA-481-2

Embossment

Embossed Carrier

Top Cover

Tape Thickness

0.102 MAX.

(0.004 MAX.)

330.2 DIA.

(13.00 DIA.)

K

(0.165)

0

K =4.90

(0.193)

P=12.00

(0.472)

W=16.00

(0.63)

Bo=10.30

(0.406)

Ao=10.30

(0.406)

FDA217STR Tape & Reel