Datasheet

BMP280 Digital Pressure Sensor

Page 39

BST-BMP280-DS001-19 | Revision 1.19 | January 2018

Bosch Sensortec

© Bosch Sensortec GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third

parties. BOSCH and the symbol are registered trademarks of Robert Bosch GmbH, Germany.

Note: Specifications within this document are subject to change without notice. Not intended for publication.

7. Package, reel and environment

7.1 Outline dimensions

depicted in Figure 18.

Figure 18: Package outline dimensions for top, bottom and side view

Note: General tolerances are ±50 µm (linear) and ±1° µm (angular)