CSR33B563JS datasheet(58/84 Pages) KEMET

58 / 84 page

KEMET

TANTALUM MOLDED / RADIAL — MIL-C-49137/6

T370/T378 (CX06) MIL-C-49137/6 SERIES

KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300

The KEMET Micron Series is available in a variety of case styles and

sizes. They are designed to operate from -55°C to +85°C at full volt-

age and to +125°C with derating. Typical applications include use in

bypass coupling, filtering, and timing circuits.

The KEMET Micron Series is qualified under MIL-C-49137/6 as mil-

itary styles CX06 (T378 Series).

The KEMET T370 Series is encapsulated in a molded gold color

epoxy. This encasement technique allows maximum utilization of cir-

cuit board real estate with precisely centered leads in a microminia-

ture case.

These molded packages also provide significant improvements in

overall dimensional consistency as well as lead wires precisely

spaced to within .010 inches (.25mm).

With our new molded packaging design, these capacitors can now

be marked using our laser printing technique. The KEMET laser

marking system ensures legibility and permanency while offering a

complete alphanumeric print format. Laser print meets all require-

ments of the Resistance to Solvents Test, method 215 of

MIL-STD-202.

• CAPACITANCE/VOLTAGE RANGE:

T370 Series: 0.68-220µF, 3-35 Volts.

T378 Series: 2.2-220µF, 3-35 Volts.

• CAPACITANCE TOLERANCE: Available in stan-

dard EIA nominal values with ±20% tolerance

standard, +40% -20%, ±10% and ±5% are also

available.

• DISSIPATION FACTOR: Maximum DF limits are

shown in corresponding series part number list-

ings on page 60. See Application Notes Section,

page 76 for additional information.

• DC LEAKAGE CURRENT: Maximum leakage val-

ues at 25° are shown in part number listings, page

60. See Application Notes Section, page 76 for

additional information.

• RATED VOLTAGE; WORKING VOLTAGE; SURGE

VOLTAGE; REVERSE VOLTAGE: See Application

Notes Section, pages 76 & 77 for description.

• IMPEDANCE and ESR: See Application Notes

Section, pages 78 for description. Reference ESR

values are listed in table below.

• AC RIPPLE VOLTAGE: Permissible AC ripple volt-

age is related to the ESR of the capacitor and the

power dissipation capabilities of a particular case

size. Thermal capacities for the various case sizes

have been determined and are listed in Table

below. For additional description see page 78.

• ENVIRONMENTAL CONSIDERATIONS:

A. Shock Test: MIL-STD-202, Method 213

Condition 1.

B. Thermal Shock, MIL-STD-202, Method 107.

C. Moisture Resistance: MIL-STD-202,

Method 106.

D. Solderability: MIL-STD-202, Method 208.

For additional Environmental Test Information see

pages 80, 81 and 82.

• LEAD MATERIAL: Solder coated nickel per

MIL-STD1266, type N32.

• LEAD TAPE and REEL: Reeling per specification

RS-468. See pages 72 and 74 for additional infor-

mation.

PERFORMANCE CHARACTERISTICS

Case

Size

Watts

.070

.080

.090

.100

Maximum Power Dissipation Capability @ 25°C

T370 ESR (OHMS) at 100 kHz @ +25

°C

(The ESR values provided below are for

reference only. No warranty, as stated on

page 3 and reincorporated here, is made as

to the accuracy of these values for any

particular T370 Series product.)

0.68

1.00

1.50

2.20

3.30

4.70

6.80

10.0

15.0

22.0

33.0

47.0

68.0

100.0

150.0

6.0

5.0

3.7

3.0

2.0

1.8

1.6

0.9

6.0

5.0

3.7

2.7

2.1

1.7

1.3

1.0

2.5

2.0

1.6

1.3

1.0

5.5

4.5

3.6

2.9

2.3

1.8

1.4

1.2

6.0

5.0

4.0

3.1

2.5

2.0

1.5

1.2

10.0

8.0

6.0

5.0

4.0

3.0

2.5

2.0

1.6

1.3

Cap.

µF

Volt

CSR33B563JS データシート(PDF) 58 Page - Kemet Corporation

CSR33B563JS データシート(HTML) 58 Page - Kemet Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84

データシートダウンロード