7/20

MTC50150

10 APPLICATION EXAMPLE

The example below shows the reference design developed for the evaluation board. It is a complete

ADSL-based data gateway that connects to the ADSL enabled phone jack and provides a connection to

a 10/100bT Ethernet port. It utilizes a set of two ASSP available from ST.

The MTC50150 kit is composed of the following elements: A DynaMiTe™ ADSL modem and AFE

(MTC20174). Additional components are SDRAM and Flash memory and Ethernet PHY. Discrete compo-

nents and connectors are not shown on the block diagram. Larger SDRAM and Flash can be connected

to the MTC50150 to store and execute additional (custom) application.

Figure 4. Application block diagram

Intensive qualification efforts have been spent on this reference design insuring users of the platform max-

imum interoperability and smooth, rapid design-in, hence reducing engineering effort and Total Time to

Market (TTM).

ADSL

AFE

MTC50150

SDRAM

ETHERNET

PHY

MTC20174

WAN

LAN

FLASH

D02TL544MOD1