WIZ610io User Manual (WIZnet Co.,Ltd.)

3

1. Introduction

WIZ610io is the internet offload network module that includes W6100 (TCP/IP

hardwired chip, include PHY), MAG-JACK (RJ45 with X’FMR) with other glue logics.

It can be used as a component and no effort is required to interface W6100 and

Transformer.

The WIZ610io is an ideal option for users who want to develop their Internet

enabling systems rapidly.

For the detailed information on implementation of Hardware TCP/IP, refer

to the W6100 Datasheet.

WIZ610io consists of W6100 and MAG-JACK.

⚫

Hardware TCP/IP, Ethernet MAC : Included in W6100

⚫

Ethernet PHY : Included in W6100

⚫

Connector : MAG-JACK(RJ45 with Transformer)

1.1 Feature

⚫

Support Hardwired TCP/IP Protocols : TCP, UDP, IPv6, IPv4, ICMPv6,

ICMPv4, IGMP, MLDv1, ARP, PPPoE

⚫

Support IPv4/IPv6 Dual Stack

⚫

Support 8 independent SOCKETs simultaneously with 32KB Memory

⚫

Support SOCKET-less Command:

ARP, PING, ICMPv6(PING, ARP,DAD,NA,RS) Command for IPv6 Auto-

configuration& Network Monitoring

⚫

Support Ethernet Power Down Mode & Main Clock Switching for power save

⚫

Support Wake on LAN over UDP

⚫

Support Serial Interface: High Speed SPI(MODE 0/3)

⚫

Internal 16Kbytes Memory for TX/ RX Buffers

⚫

10BaseT/100BaseTX Ethernet PHY Integrated

⚫

Support Auto Negotiation (Full and half duplex, 10 and 100-based )

⚫

Support Auto-MDIX only on Auto-Negotiation Mode

⚫

3V operation with 5V I/O signal tolerance

⚫

Network Indicator LEDs (Full/Half Duplex, Link, 10/100 Speed, Active)

⚫

Interfaces with two 2.54mm pitch 1 x 10 header pin

⚫

Temperature : -40 ~ 85℃(Operating)