DocID16887 Rev 4

11/20

STM6700, STM6710

Maximum ratings

20

5

Maximum ratings

Stressing the device above the ratings listed in Table 3 may cause permanent damage to

the device. These are stress ratings only and operation of the device at these or any other

conditions above those indicated in Table 4 of this specification is not implied. Exposure to

absolute maximum rating conditions for extended periods may affect device reliability. Refer

also to the STMicroelectronics™ SURE program and other relevant quality documents.

Table 3. Absolute maximum ratings

Symbol

Parameter

Value

Unit

–55 to 150

°C

(1)

1.

Reflow at peak temperature of 260 °C. The time above 255 °C must not exceed 30 seconds.

Lead solder temperature for 10 seconds

260

Input or output voltage

V

Supply voltage

–0.3 to + 7

Output current

20

mA

Thermal resistance (junction to ambient)

N/A

°C/W