| データシートサーチシステム |
|
STPD01 データシート(PDF) 19 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STPD01 データシート(HTML) 19 Page - STMicroelectronics |
|
19 / 43 page ![]() Figure 33. Deglitch time Pon VOUT deglitch time 5% of Vout Time Time 7.5 Vout transition The Vout transitions are performed forcing the device into PWM mode in order to guarantee the max. slew rate reported in the EC table (see Table 6. Electrical characteristics). During the transitions, the voltage level overcomes the limits defined by the ±2% precision. Therefore an extra margin of 500 mV (max.) is allowed for about 300 ms and OVP is masked in order to avoid false alarms. Figure 34. Transition envelope for positive voltage transitions Slew rate 500mV 500mV Voltage Time Figure 35. Transition envelope for negative voltage transitions 500mV 500mV Voltage Time Slew rate The maximum slew rate is guaranteed with the output capacitance value defined in the USB-PD spec. as follows: STPD01 Vout transition DS13473 - Rev 1 page 19/43 |
|
リンク URL |
| ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |