 |
データシートサーチシステム |
|
|
データシートサーチシステム |
|
TMP139AIYAHT データシート(PDF) 40 Page - Texas Instruments |
|
|
|
|||||||||||||||||||||||||||||
TMP139AIYAHT データシート(HTML) 40 Page - Texas Instruments |
|
|
40 / 58 page  7.6.10 MR26: TS Configuration (address = 1Ah) [reset = 00h] The MR26 register may be used by the host to disable the temperature sensor. The device will stop temperature conversion or, if there is an ongoing conversion when the bit is set, then it shall complete the current conversion and then disable the temperature sensor. Return to Register Map. Figure 7-56. MR26: Temperature Sensor Configuration Register 7 6 5 4 3 2 1 0 Reserved DIS_TS R-00h RW-0 Table 7-22. MR26: Temperature Sensor Configuration Field Descriptions Bit Field Type Reset Description 7:1 Reserved R 00h Reserved 0 DIS_TS RW 0 Disable temperature sensor 0 = Enable temperature sensor. 1 = Disable temperature sensor. 7.6.11 MR27: Interrupt Configuration (address = 1Bh) [reset = 00h] Return to Register Map. Figure 7-57. MR27: Interrupt Configuration Register 7 6 5 4 3 2 1 0 CLR_GLOBAL Reserved IBI_ERROR_EN IBI_TS_CRIT_ LOW_EN IBI_TS_CRIT_ HIGH_EN IBI_TS_LOW_E N IBI_TS_HIGH_E N W1C R-00 R-0 RW-0 RW-0 RW-0 RW-0 Table 7-23. MR27: Interrupt Configuration Field Descriptions Bit Field Type Reset Description 7 CLR_GLOBAL R0-W1C 0 Global clear event status and In Band Interrupt (IBI) status 1 = Write '1' to clear the registers MR48, MR51 and MR52. Writing a '0' has no effect on registers MR48, MR51 and MR52. 6:5 Reserved R 00 Reserved 4 IBI_ERROR_EN R 0 In band interrupt (IBI) enable for MR52 error log.1 0 = Disable. Errors logged in MR52 register bits do not generate an IBI to host. 1 = Enable. Errors logged in MR52 register bits generate an IBI to host. 3 IBI_TS_CRIT_LOW_EN RW 0 In band interrupt (IBI) enable for temperature sensor critical low. 0 = Disable. MR51 register TS_CRIT_LOW_STATUS bit does not generate an IBI to host. 1 = Enable. MR51 register TS_CRIT_LOW_STATUS bit generates an IBI to host. 2 IBI_TS_CRIT_HIGH_EN RW 0 In band interrupt (IBI) enable for temperature sensor critical high. 0 = Disable. MR51 register TS_CRIT_HIGH_STATUS bit does not generate an IBI to host. 1 = Enable. MR51 register TS_CRIT_HIGH_STATUS bit generates an IBI to host. 1 IBI_TS_LOW_EN RW 0 In band interrupt (IBI) enable for temperature sensor low. 0 = Disable. MR51 register TS_LOW_STATUS bit does not generate an IBI to host. 1 = Enable. MR51 register TS_LOW_STATUS bit generates an IBI to host. TMP139 SNIS217 – DECEMBER 2020 www.ti.com 40 Submit Document Feedback Copyright © 2021 Texas Instruments Incorporated Product Folder Links: TMP139 |
|
リンク URL |
| ALLDATASHEETはお客様のビジネスに役立ちますか？ [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Japanese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
