 |
データシートサーチシステム |
|
|
データシートサーチシステム |
|
TSC2011IST データシート(PDF) 28 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
TSC2011IST データシート(HTML) 28 Page - STMicroelectronics |
|
|
28 / 54 page  5.3 Unidirectionnal / bidirectionnal operation • Unidirectional operation Unidirectional mode of operation allows the device to measure the current through a shunt resistor in one direction only. The output reference can be ground or Vcc and can be set by using Vref1 and Vref2 pins for adjustment. • Ground referenced Figure 58. Output reference to ground In this configuration Vref1 pin and Vref2 pin are connected together to the ground. The output common mode voltage is then automatically set to GND when no current flows through the Rshunt resistance. This configuration allows the full scale output in unidirectional mode. It allows a current to be measured as described in Figure 58. Output reference to ground. • Vcc referenced Figure 59. Output reference to Vcc TSC2010, TSC2011, TSC2012 Unidirectionnal / bidirectionnal operation DS13057 - Rev 4 page 28/54 |
|
リンク URL |
| ALLDATASHEETはお客様のビジネスに役立ちますか？ [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Japanese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
