ADP7118

Data Sheet

Rev. F | Page 4 of 24

INPUT AND OUTPUT CAPACITANCE, RECOMMENDED SPECIFICATIONS

Table 2.

Parameter

Symbol

Test Conditions/Comments

Min

Typ

Max

Unit

INPUT AND OUTPUT CAPACITANCE

1.5

µF

Capacitor Effective Series Resistance (ESR)

0.001

0.3

Ω

1

The minimum input and output capacitance must be greater than 1.5 μF over the full range of operating conditions. The full range of operating conditions in the

application must be considered during device selection to ensure that the minimum capacitance specification is met. X7R and X5R type capacitors are recommended,

while Y5V and Z5U capacitors are not recommended for use with any LDO.