MODEL: 10AC

http://www.m-system.co.jp/

10AC SPECIFICATIONS

ES-0836 Rev.8 Page 1/3

High-density Signal Conditioners 10-RACK

AC TRANSMITTER

Functions & Features

• Converting an alternating current/voltage into two

standard process signals

• True RMS sensing

• Optional second channel output available at the front

terminals and at the Standard Rack connector

Typical Applications

• Converting a large AC current in combination with a shunt

resistor, or a narrow span AC voltage

MODEL: 10AC–[1][2][3]–R[4]

ORDERING INFORMATION

• Code number: 10AC-[1][2][3]-R[4]

Specify a code from below for each [1] through [4].

(e.g. 10AC-A1A6-R/Q)

• Special input range (For codes AZ & A8)

• Specify the specification for option code /Q

(e.g. /C01)

[1] INPUT

Current

AA: 0 – 10 mA AC (Input resistance 100 Ω)

AB: 0 – 50 mA AC (Input resistance 20 Ω)

AC: 0 – 100 mA AC (Input resistance 10 Ω)

AD: 0 – 500 mA AC (Input resistance 1 Ω)

AZ: Specify current (See INPUT SPECIFICATIONS)

(0 % input must be 0 mA.)

Voltage

A1: 0 – 100 mV AC (Input resistance 10 kΩ min.)

A2: 0 – 500 mV AC (Input resistance 10 kΩ min.)

A3: 0 – 1 V AC (Input resistance 10 kΩ min.)

A4: 0 – 5 V AC (Input resistance 200 kΩ min.)

A5: 0 – 10 V AC (Input resistance 200 kΩ min.)

A6: 0 – 120 V AC (Input resistance 200 kΩ min.)

A7: 0 – 150 V AC (Input resistance 200 kΩ min.)

A8: Specify voltage (See INPUT SPECIFICATIONS)

(0 % input must be 0 V.)

[2] OUTPUT 1

Current

A: 4 – 20 mA DC (Load resistance 600 Ω max.)

B: 2 – 10 mA DC (Load resistance 1200 Ω max.)

C: 1 – 5 mA DC (Load resistance 2400 Ω max.)

D: 0 – 20 mA DC (Load resistance 600 Ω max.)

E: 0 – 16 mA DC (Load resistance 750 Ω max.)

F: 0 – 10 mA DC (Load resistance 1200 Ω max.)

G: 0 – 1 mA DC (Load resistance 12 kΩ max.)

Voltage

1: 0 – 10 mV DC (Load resistance 10 kΩ min.)

2: 0 – 100 mV DC (Load resistance 100 kΩ min.)

3: 0 – 1 V DC (Load resistance 100 Ω min.)

4: 0 – 10 V DC (Load resistance 1000 Ω min.)

5: 0 – 5 V DC (Load resistance 500 Ω min.)

6: 1 – 5 V DC (Load resistance 500 Ω min.)

[3] OUTPUT 2

0: None

Voltage

6: 1 – 5 V DC (Load resistance 5000 Ω min.)

POWER INPUT

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

[4] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

GENERAL SPECIFICATIONS

Construction: Rack-mounted; terminal access via screw

terminals at the front and via card-edge connector at the

rear; terminal cover provided

Connection

Input: M3.5 screw terminals (torque 0.8 N·m)

Output: Card-edge connector and M3.5 screw terminals