Hardware Specifications

Specification

Description

Backplane Current

Load

800 mA @ 5 V

Operating

Temperature

0 to 60°C (32 to 140°F)

Storage Temperature

–40 to 85°C (–40 to 185°F)

Shock:

30g Operational

50g non-operational

Vibration: 5 g from 10 to 150 Hz

Relative Humidity

5 to 95% (non-condensing)

LED Indicators:

Module Status

Backplane Transfer Status

Application Status

Serial Activity

Debug/Configuration port (CFG)

CFG Port (CFG)

RJ45 (DB-9M with supplied cable)

RS-232 only

Application ports (PRT1 & PRT2)

Full hardware handshaking control, providing radio, modem

and Multi-drop support

Software configurable

communication

parameters

Baud rate: 110 to 115,200 baud,

depending on protocol

RS-232, 485 and 422

Parity: none, odd or even

Data bits: 5, 6, 7, or 8

Stop bits: 1 or 2

RTS on/off delay: 0 to 65535 ms

App Ports (P1,P2)

(Serial modules)

RJ45 (DB-9M with supplied cable)

RS-232 handshaking configurable

500V Optical isolation from

backplane

Shipped with Unit

RJ45 to DB-9M cables for each port

6-foot RS-232 configuration cable

Functional Specifications

The MVI56-101S module accepts commands from an

attached master unit. A port configured as a virtual slave

permits a remote master to interact with all data

contained in the module. This data can be derived from

the ControlLogix processor. The remote master device

uses the fully-configured databases in the module to

control outputs and monitor inputs. The module can

operate in balanced or unbalanced mode.

•

Supports time stamp events

•

Supports time and data synchronization from a

master or the processor

•

Supports monitored data

•

Event queue supports 99 points for each data type

•

Reports events by configurable priority order

•

Order monitored points by interrogation groups

•

Configurable deadband for monitored measured

points

•

Supports Master Class 1 and Class 2 polls with

configurable parameters

•

Acknowledgement transmission is handled internally

by the module

•

Configurable data link address, Common ASDU

address and Information Object Address

•

Configurable pulse duration.

Additional Products

ProSoft Technology offers a full complement of

hardware and software solutions for a wide variety of

industrial communication platforms.

Visit our web site at http://www.prosoft-technology.com

for a complete list of products.

Ordering Information

To order this product, please use the following:

MVI56-101S

IEC 60870-5-101 Slave

Communication Module

To place an order, please contact your local ProSoft

Technology distributor. For a list of ProSoft distributors

near you, go to http://www.prosoft-technology.com

Copyright © ProSoft Technology, Inc. 2019. All Rights Reserved.

May 3, 2019