MODEL: M1EAXV-2

M1EAXV-2 SPECIFICATIONS

ES-5995 Rev.2 Page 4/10

https://www.m-system.co.jp/

EXTERNAL VIEW

Mode Button

Set Button

Display

Configurator Jack

Up Button

Down Button

■ COMPONENT FUNCTION

COMPONENT

FUNCTION

Display

Indicates present values, setting values and abnormal information.

Two types of present values are displayed respectively at the upper and lower parts according to setting.

Mode button

Shifts from Measuring mode to each setting mode.

The destination changes depending on how long the button is held down.

Pressing Mode button for ≥ 2 seconds returns to Measuring mode from each setting mode..

Set button

Shifts the setting value of each setting parameter item to a setting changeable state.

When at setting changeable state, used to move through the digits of setting value and to enter (save) the set-

ting value.

Cancels Ch1’s and Ch2’s alarm latches in Measuring mode (hold down for ≥ 2 seconds).

Up button

Shifts through setting parameter items and to increase or select the setting value.

Cancels Ch1’s latched alarm in Measuring mode (hold down for ≥ 2 seconds).

Down button

Shifts through setting parameter items and to decrease or select the setting value.

Cancels Ch2’s latched alarm in Measuring mode (hold down for ≥ 2 seconds).

Con gurator Jack

Used to perform con guration with M1EA con gurator software (model: M1EACFG).

When using the software, set the Lockout setting of the unit to ‘Lock’.

Refer to the operating manual (EM-5995-B) for detailed procedures.