ACE25GD100

SPI 1M Bits Serial EEPROM

VER 1.1

2

Absolute Maximum Ratings

Parameters

Ratings

Units

Operating Temperature

–40 to 85

°C

Storage Temperature

–65 to 150

°C

Voltage on any Pin with Respect to Ground (Note)

–0.5 to 6.5

V

VESD（HBM）

8000

V

Note:

The DC input voltage on any pin should not be lower than −0.5 V or higher than VCC + 0.5 V. During transitions, the

voltage on any pin may undershot to no less than

−1.5 V or overshoot to no more than VCC+ 1.5 V, for periods of

less than 20 ns.

Comments: Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these

limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected.