MIC863 datasheet(18/26 Pages) MICROCHIP

部品番号	MIC863

部品情報	Dual Ultra-Low Power Op Amp in SOT-23-8

PDF	26 Pages

Scroll/Zoom	100%

メーカー	MICROCHIP [Microchip Technology]

ホームページ	http://www.microchip.com

Logo

18 / 26 page

MIC863

DS20006308A-page 18

 2020 Microchip Technology Inc.

4.0

APPLICATION INFORMATION

Regular

supply

bypassing

techniques

are

recommended. A 10 μF capacitor in parallel with a

0.1 μF capacitor on both the positive and negative

supplies are ideal. For best performance all bypassing

capacitors should be located as close to the op amp as

possible and all capacitors should be low equivalent

series inductance (ESL), equivalent series resistance

(ESR). Surface-mount ceramic capacitors are ideal.

The MIC863 is intended for single-supply applications

configured with a grounded load. It is not advisable to

operate the MIC863 under either of the following

conditions when the load is less than 20 kΩ and the

output swing is greater than 1V (peak-to-peak):

• A grounded load and split supplies (±V)

• A single supply where the load is terminated

above ground.

Under the conditions listed above, there may be some

instability when the output is sinking current.

MIC863 データシート(PDF) 18 Page - Microchip Technology