HMC6505ALC5TR-R5 datasheet(27/30 Pages) AD

部品番号	HMC6505ALC5TR-R5

部品情報	5.5 GHz to 8.6 GHz, GaAs, MMIC, I/Q Upconverter

PDF	30 Pages

Scroll/Zoom	100%

メーカー	AD [Analog Devices]

ホームページ	http://www.analog.com

Logo

27 / 30 page

Data Sheet

HMC6505A

Rev. 0 | Page 27 of 30

APPLICATIONS INFORMATION

TYPICAL APPLICATION CIRCUIT

Figure 103 shows the typical application circuit for the

HMC6505A. To select the appropriate sideband, an external 90°

hybrid is required. For applications not requiring operation to

dc, use an off chip dc blocking capacitor. For applications that

require the LO signal at the output to be suppressed, use a bias

tee or RF feed. Ensure that the source or sink current used for

LO suppression is <3 mA for each IF port to prevent damage to

the device. The common-mode voltage for each IF port is 0 V.

To select the upper sideband, connect the IF1 pin to the 90°

port of the hybrid and the IF2 pin to the 0° port of the hybrid.

To select the lower sideband, connect the IF1 pin to the 0° port

of the hybrid and the IF2 pin to the 90° port of the hybrid.

HMC6505A

Figure 103. Typical Application Circuit

HMC6505ALC5TR-R5 データシート(PDF) 27 Page - Analog Devices