 |
データシートサーチシステム |
|
|
データシートサーチシステム |
|
R7K4FML3-6-DC32A1-R データシート(PDF) 1 Page - M-System Co.,Ltd. |
|
|
|||||||||||||||||||||||||||||
R7K4FML3-6-DC32A1-R データシート(HTML) 1 Page - M-System Co.,Ltd. |
|
|
1 / 7 page  MODEL: R7K4FML3-6-DC32A1 R7K4FML3-6-DC32A1 SPECIFICATIONS ES-7773-G Rev.1 Page 1/7 http://www.m-system.co.jp/ Remote I/O R7K4F Series MECHATROLINK I/O MODULE (NPN transistor output, 32 points, screw terminal block, MECHATROLINK- III use, external excitation 12V) Functions & Features • 32 points NPN transistor output module for MECHATROLINK- III mm (inch) 210 (8.27) 53.5 (2.11) 47(1.85) MODELR7K4FML3-6-DC32A1-R[1] ORDERING INFORMATION • Code number: R7K4FML3-6-DC32A1-R[1] Specify a code from below for [1]. (e.g. R7K4FML3-6-DC32A1-R/Q) • Specify the specification for option code /Q (e.g. /C01/SET) TERMINAL BLOCK 6: Screw terminal block for power supply Connector for MECHATROLINK- III Screw terminal block for I/O I/O TYPE DC32A1: NPN transistor output, 32 points (12 V external output power) POWER INPUT DC power R: 24 V DC (Operational voltage range: ±10 %; ripple 10 %p-p max.) [1] OPTIONS blank: none /Q: Options other than the above (specify the specification) SPECIFICATIONS OF OPTION: Q (multiple selections) COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating /C03: Rubber coating EX-FACTORY SETTING /SET: Preset according to the Ordering Information Sheet (No. ESU-7773-DC32) GENERAL SPECIFICATIONS Connection MECHATROLINK-III: MECHATROLINK-III connector Power input, output: M3 separable screw terminal (torque 0.5 N·m) Solderless terminal: Refer to the drawing at the end of the section. Recommended manufacturer: Japan Solderless Terminal MFG.Co.Ltd, Nichifu Co.,ltd Applicable wire size: 0.25 to 1.65 mm2 (AWG 22 to 16) Screw terminal: Nickel-plated steel Housing material: Flame-resistant resin (gray) Isolation: Output to MECHATROLINK or FE to power Output at the loss of communication: Output hold(*), Output clear Selectable with the front DIP SW (*) factory default setting Status indicator LEDs: PWR, ERR, CON, LNK1, LNK2 (5 LEDs) indicate the module’s operating conditions. (Refer to the insruction manual) Discrete output status indicator LED: Green LED turns on with output ON ■Recommended solderless terminal 3.3 (.13) max mm (inch) MECHATROLINK-III COMMUNICATION Baud rate: 100 Mbps Transmission distance: 6300 m max. Distance between stations: 100 m max. Transmission media: MECHATROLINK cable (Model JEPMC- W6013-x-E, Yaskawa Controls Co., Ltd.) Connector: TYCO AMP Industrial mini I/O connector Max. number of slaves: 62 (The maximum number of slaves might change depending on the master unit. Refer to the manual of the master unit) Transmission cycle: 125 µsec., 250 µsec., 500 µsec., 1 – 64 msec. (with 1 msec. increments) Communication cycle: 125 µsec. through 64 msec. |
同様の部品番号 - R7K4FML3-6-DC32A1-R |
|
同様の説明 - R7K4FML3-6-DC32A1-R |
|
|
|
リンク URL |
| ALLDATASHEETはお客様のビジネスに役立ちますか？ [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Japanese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
