![]() |
データシートサーチシステム |
|
GLQ110 データシート(PDF) 1 Page - Emerson Network Power |
|
|
GLQ110 データシート(HTML) 1 Page - Emerson Network Power |
1 / 109 page ![]() GLQ110 Series Installation & Operating Instructions P/N: A272-168 Rev 2 12/29/09 Ref: 03361001602 Installation & Safety To comply with the published safety standards, the following must be observed when using this power supply: 1. Maximum ambient temperature for the power supply must not exceed 50°C. 2. When installing the power supply in the end-use equipment, special attention is required to ensure safety compliance with the following safety standards: UL60950, EN60950-1, IEC60950-1, and CSA22.2 No. 234-M90; including the requirements for creepage distances, clearances, and distance through insulation between primary wiring and earth or secondary (SELV) wiring. 3. The power supply’s rated input voltage is automatically selected. Please refer to the specification sheet for the input voltage range. 4. The maximum output power of the supply must not exceed the rating indicated in the specification sheet. 5. The earth ground wire must be connected only to the point marked with the earth ground symbol (on the unit). 6. Hazardous voltages exist in the primary circuits. Disconnect the power supply before servicing. 7. When operating with a dc input voltage range, the unit input must be protected by a dc rated fuse in the end-use installation system. 8. The internal fuse should only be replaced with a 4 A, 250 V ac, Type SP0001.1010 manufactured by Schurter AG, Type 216004 manufactured by Littelfuse or Type S501 manufactured by Cooper. 9. This power supply is marked following the provisions of the Low Voltage Directive, 2006/95/EC. For technical assistance, contact SolaHD Technical Support at (800) 377-4384 or send an e-mail to tech@solahd.com. Please visit our Web site at www.solahd.com for additional product information and specification sheets. Output Ratings Model OutputVoltage (V) ConvectionCooling 30CFMForcedAirCooling Max.Output Current(A) Max.Output Power(W) Max.Output Current(A) Max.Output Power(W) GLQ112 +5 9.0 80 11.0 110 +12 4.5 5 -12 0.7 1.0 ±5 to ±25 2.5 3.0 GLQ113 +5 9.0 11.0 +15 4.5 5.0 -15 0.7 1.0 ±5 to ±25 2.5 3.0 GLQ114 +5 9.0 11.0 +12 4.5 5.0 -12 0.7 1.0 +24 3.5 4.5 Connector PIN Designation InputConnector PIN GLQ112 GLQ113 GLQ114 SK1 1 GND 3 Neutral 5 Line OutputConnector PIN GLQ112 GLQ113 GLQ114 SK2 1 +5 V 2 3 4 Common 5 6 7 8 +12 V +15 V +12 V 9 +12 V +15 V +12 V 10 -12 V -15 V -12 V 11 +5 V to +25 V +5 V to +25 V +24 V 12 -5 V to -25 V -5 V to -25 V Common SK201 1 +Sense 2 -Sense SK202 1 P OK 2 GND |
同様の部品番号 - GLQ110 |
|
同様の説明 - GLQ110 |
|
|
リンク URL |
プライバシーポリシー |
ALLDATASHEET.JP |
ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |