GLX140-CF Cover Top Fan Kit

P/N: A272-216 Rev 0 09/10/09 Ref: LPX140-CF

While every precaution has been taken to ensure accuracy and completeness in this manual, EGS Electrical Group, LLC. assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions.

The SolaHD and Emerson logos are registered in the U.S. Patent and Trademark Office. All other product or service names are the property of their registered owners. ©2009 EGS Electrical Group, LLC. All rights reserved. Specifications subject to change without notice.

Designed for the following power supply: GLQ142

What’s Included

• One cover with top fan

• Four M3 x 6mm countersunk screws

Recommended Assembly

1. Attach fan wires to SK5 output connector.

SK5

SK2

SK6

1

2

6

1

SK3

Figure 1: SK5 Output Connector

2. Place cover over power supply and align with base countersink holes.

3. Secure cover to base using the supplied M3 x 6mm countersunk screws (4).

Overall Dimensions

1.50

[38.1]

-CF option

7.00 [177.8]

3.15 [80.0]

Figure 2: Mechanical Drawing

Notes

• All dimensions are in inches [mm].

• Ensure that the relevant safety standards (e.g. EN60950-1) are complied with, in

respect to creepage and clearance distances, and distances through insulation.

Technical Support

U.S.: (800) 377-4384 • International: (847) 268-6000

E-mail: tech@solahd.com • Web site: www.solahd.com