OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006

Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com

Issue 1.0

0505

Page 2

4-Pin Amber LED Lamp (7.6mm)

OVFSAAC8

Storage Temperature Range

-40 ~ +100°C

Operating Temperature Range

-40 ~ +100°C

260°C

Reverse Voltage

5 V

70 mA

Peak Forward Current (10% Duty Cycle, PW

”  —VHF

200 mA

Power Dissipation

210 mW

Absolute Maximum Ratings

Notes:

1.

Solder time less than 5 seconds at temperature extreme.

2.

Heat sink is adequate if the device is operated at ambient temperature higher than 25°C. For long term performance the drive currents

between 10mA and 50mA are recommended. Please contact an Optek sales representative for more information on recommended drive

conditions.

Electrical Characteristics

SYMBOL

PARAMETER

MIN

TYP

MAX

UNITS

CONDITIONS

lumen

Luminous Flux

3000

5000

----

mlm

Forward Voltage

----

2.5

3.0

V

Reverse Current

----

----

100

µA

D

Dominant Wavelength

584

591

599

nm

2 ½

50% Power Angle

----

100

----

deg

Orders for OVFSAAC8 may be filled with any or all bins contained as below.

Rank

V3

V4

V5

V6

V7

Voltage (V)

2.0–2.2

2.2–2.4

2.4–2.6

2.6–2.8

2.8–3.0

Important Notes:

1. All ranks will be included per delivery, rank ratio will be based on the chip distribution.

2. To designate luminous intensity ranks, please contact OPTEK.

5000-7300

M

4000-6100

L

3500-4800

K

3000-4200

J

Dominant Wavelength (nm)

Luminous flux is at

J bin or above.

584

599

590

593

596

587

X2

X3

X4

X5

X6