| データシートサーチシステム |
|
VSC8540XMVRT-SV データシート(PDF) 10 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
VSC8540XMVRT-SV データシート(HTML) 10 Page - Microchip Technology |
|
10 / 87 page ![]() VSC8540RT DS60001603E-page 10 2022 Microchip Technology Inc. and its subsidiaries Miscellaneous THERMDA 15 A VDD25A Thermal Diode Anode Miscellaneous THERMDC_VSS 16 A VDD25A Thermal Diode Cathode connected to device ground. Temperature sensor must be chosen accordingly. PHY Configuration CLK_SQUELCH_IN 57 I, PD VDDIO Input control to squelch recovered clock PHY Configuration CLKOUT 54 I/O, PD VDDIO Clock output, can be enabled or disabled. Output a clock based on the local reference clock with programmable frequency. This pin is not active when NRESET is asserted and is disabled by default. When disabled, the pin is held low. The logic state on this pin is latched on the rising edge of NRESET to configure CLKOUT output. See Section 5.3, Hardware Mode Strapping and PHY Addressing for details. PHY Configuration COMA_MODE 56 I/O, PU VDDIO When this pin is asserted high, PHY is held in a powered down state. When de- asserted low, PHY is powered up and resumes normal operation. This signal is also used to synchronize the operation of multiple chips on the same PCB to provide visual synchronization for LEDs driven by separate chips. PHY Configuration FASTLINK_FAIL 52 O VDDIO Fast link failure indication signal PHY Configuration LED0 60 O VDDIO LED direct drive outputs. All LED pins are active low. LED_DATA output in serial LED mode. PHY Configuration LED1 59 O VDDIO LED direct drive outputs. All LED pins are active low. LED_CLK output in serial LED mode. PHY Configuration NRESET 53 I, PD VDDIO Device reset. Active low input that powers down the device and sets all register bits to their default state. PHY Configuration RCVRD_CLK 55 O VDDIO Recovered clock output, can be enabled or disabled. Output a clock based on the selected active media with programmable frequency. This pin is not active when NRESET is asserted. When disabled, the pin is held low. PHY Configuration REFCLK_SEL_0 62 I, PU VDDIO Reference clock mode/frequency select signal PHY Configuration REFCLK_SEL_1 61 I, PU VDDIO Reference clock mode/frequency select signal PHY Configuration XTAL1 63 I VDD25A Crystal/single ended reference clock input TABLE 3-2: PINS BY FUNCTION |
|
リンク URL |
| ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |