1161 Ringwood Ct, #110, San Jose, CA 95131, U. S. A. Tel.: (408) 748-9100, Fax: (408) 748-9111

www.analogtechnologies.com

Copyrights 2000-2018, Analog Technologies, Inc. All Rights Reserved. Updated on 3/22/2018

www.analogti.com

3

Analog Technologies

ATAS80

Auto Iron

OPERATION INSTRUCTION

1. Connection between the soldering handle and the main body

A. Position the indication point of the soldering handle knob towards the corresponding point of the plug.

See Figure 5.

Figure 5

B. Position the salient point of the plug of the soldering handle with the indent point of the main body socket, then

insert and tighten. See Figure 6.

Figure 6

C. Turn the plug knob of the soldering handle clockwise again. See Figure 7.

Figure 7

2. Disassembly of the soldering handle from the main body. (removal)

Reverse the procedure from above, and then remove. See Figure 8.

Figure 8

Aim

Aim