Features

•

Kit content:

–

the STEVAL-PROTEUS main board

–

LiPo battery 3.7 V, 480 mAh

–

Plastic case and screws

•

Main components on the STEVAL-PROTEUS:

–

STM32WB5MMG - ultra-low-power module, dual core 32-bit Arm Cortex-

M4 MCU 64 MHz, Cortex-M0+ 32 MHz for real-time radio layer, with

1 Mbyte of flash memory, 256kbyte SRAM, and 2.4GHz RF supporting

Bluetooth® Low Energy 5, 802.15.4, Zigbee 3.0, and Thread

–

IIS3DWB - ultra-wide bandwidth up to 6 kHz, low noise, 3-axis digital

accelerometer

–

ISM330DHCX - iNEMO inertial module with machine learning core and

finite state machine with digital output

–

IIS2DLPC - high-performance ultra-low-power 3-axis digital accelerometer

–

STTS22H - low-voltage, ultra-low-power, 0.5°C accuracy I²C/SMBus 3.0

temperature sensor

–

2Gb QSPI NOR flash memory for data storage

–

STSAFE-A110 - secure element

–

STBC02 - Li-Ion linear battery charger with LDO

–

ST1PS02 - step-down converter with digital voltage selection

–

Three push-buttons (one reset, one user, one power-on battery)

–

Four LEDs (three user LEDs, one STBC02 LED status)

–

Flexible power supply options - LiPo battery, USB power, and primary

battery

–

SWD connector for debugging and programming capability

–

34-pin expansion connector compliant with STMOD+

•

Temperature monitoring and vibration preprocessing data in the time and

frequency domain, machine learning, and AI to address industrial asset

monitoring

•

STBLESensor app support for Android and iOS to ease the board and

processing configuration, condition monitoring, and anomaly detection

•

Comprehensive software libraries and demonstration examples available

Description

The STEVAL-PROTEUS1 is an evaluation tool designed for temperature and

vibration monitoring. It is based on a 2.4 GHz multiprotocol wireless SoC to address

machine or facility condition monitoring for industrial applications.

The evaluation board simplifies the prototyping, evaluation and development of

wireless industrial sensor nodes to enable the predictive maintenance. It comes with

a LiPo battery and a plastic case. All components are mounted exclusively on the

top side of the PCB to ensure an easy mounting on other equipment. The included

comprehensive software and the firmware libraries with time and frequency domain

vibration analysis ease your software customization and can reliably improve your

time-to-market.

Product summary

Industrial sensor

evaluation kit

for condition

monitoring based

on the 2.4 GHz

STM32WB5MMG

module

STEVAL-

PROTEUS1

Software package

for the STEVAL-

PROTEUS1 kit with

signal processing

to enable predictive

maintenance in a

WPAN

STSW-PROTEUS

Ultra-low-power

dual core Arm

Cortex-M4 MCU

STM32WB5MMGH

6UTR

Ultra-wide

bandwidth, low-

noise, 3-axis digital

vibration sensor

IIS3DWBTR

iNEMO inertial

module with

Machine Learning

Core

ISM330DHCXTR

Industrial sensor evaluation kit for condition monitoring based on the 2.4 GHz

STM32WB5MMG module

STEVAL-PROTEUS1

Data brief

DB4641 - Rev 1 - June 2022

For further information contact your local STMicroelectronics sales office.

www.st.com