Request for your special attention and precautions in using the technical information and

semiconductors described in this book

regulations of the exporting country, especially, those with regard to security export control, must be observed.

(2) The technical information described in this book is intended only to show the main characteristics and application circuit examples

of the products. No license is granted in and to any intellectual property right or other right owned by Panasonic Corporation or any

other company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any

other company which may arise as a result of the use of technical information described in this book.

(3) The products described in this book are intended to be used for general applications (such as office equipment, communications

equipment, measuring instruments and household appliances), or for specific applications as expressly stated in this book.

Consult our sales staff in advance for information on the following applications:

–

Special applications (such as for airplanes, aerospace, automotive equipment, traffic signaling equipment, combustion equipment,

life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of

the products may directly jeopardize life or harm the human body.

It is to be understood that our company shall not be held responsible for any damage incurred as a result of or in connection with

your using the products described in this book for any special application, unless our company agrees to your using the products in

this book for any special application.

(4) The products and product specifications described in this book are subject to change without notice for modification and/or im-

provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product

Standards in advance to make sure that the latest specifications satisfy your requirements.

(5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions

(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute

maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any

defect which may arise later in your equipment.

Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure

mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire

or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.

(6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,

thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which

damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.

(7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of our company.

20100202

Precautions on the Sales of IPDs

Attached table "IPD availability by customer"

1) The sale and/or the export of IPD products to any customer or customers located in any country other than Japan is expressly

prohibited by the Agreement made and executed by and between Power Integrations, Inc. and Panasonic Corporation.

2) IPD products purchased from our company, or its authorized agents, hereinafter referred to as our company, shall be used only

for production purposes by those parties who have duly purchased IPD products. Those who have purchased IPD products shall

not use such IPD products in unmodified form for re-sale, loan, or sample shipment for evaluation purposes to any other

parties.

3) If a party who has duly purchased IPD products subcontracts its production to any other parties, including its subsidiaries or any other

third parties inside and/or out of Japan, and the IPD products are consigned to such subcontracting parties thereat, such party is

obligated to monitor and control the quantity of IPD products to prevent any of the aforementioned re-sale, loan or sample shipments

from taking place.

4) In the event that any actual or threatened breach or violation of any of the above mentioned 1, 2, or 3, has occurred or is about to occur,

our company will hold all shipments of IPD products and may request the party alleged to be responsible for such occurrence for

necessary.

Note) The products of MIP50£, MIP51£, and MIP7££ are excluded from above-mentioned precautions, 1) to 3).

Application

· For power supply

· For DC-DC converter

· For power supply

· For EL driver

· For LED lighting driver

· For lamp driver/

car electronics accessories

Companies/areas to which

products cannot be sold

· Companies in European

and American countries

· Asian companies in Asia

· Other local companies

· Companies in European

and American countries

· Other local companies

· No restrictions in terms of

contract

Companies/areas to which

products can be sold

· Japanese companies in Japan

· Japanese companies in Asia

(50% or more owned)

· Japanese companies in Japan

· Japanese companies in Asia

(50% or more owned)

· Asian companies in Asia

· No restrictions in terms of

contract

MIP0£££

MIP3£££

MIP9L££

Note) If you have any inquiries about sales, contact Corporate Marketing & Sales Division of our company.

Parts No.

MIP1££

MIP4£££

MIP2£££

MIP9A££

MIP55£

MIP9E££

MIP50£

MIP51£

MIP803/804

MIP7££

MIP816/826