TDA75610S-QLX datasheet(19/42 Pages) STMICROELECTRONICS

部品番号	TDA75610S-QLX

部品情報	4 x 45 W power amplifier with full I2C diagnostics, high efficiency and low voltage operation

PDF	42 Pages

Scroll/Zoom	100%

メーカー	STMICROELECTRONICS [STMicroelectronics]

ホームページ	http://www.st.com

Logo

19 / 42 page

DocID025599 Rev 6

19/42

TDA75610SLV

Diagnostics functional description

Figure 25. SVR and output pin behavior (Case 2: with turn-on diagnostic)

The information related to the outputs status is read and memorized at the end of the

current pulse plateau. The acquisition time is 100 ms (typ.). No audible noise is generated in

the process. As for SHORT TO GND / Vs the fault-detection thresholds remain unchanged

from 26 dB to 16 dB gain setting. They are as follows:

Figure 26. Short circuit detection thresholds

Concerning SHORT ACROSS THE SPEAKER / OPEN SPEAKER, the threshold varies

from 26 dB to 16 dB gain setting, since different loads are expected (either normal speaker's

impedance or high impedance). The values in case of 26 dB gain are as follows:

Figure 27. Load detection thresholds - high gain setting

If the Line-Driver mode (Gv= 16 dB and Line Driver Mode diagnostic = 1) is selected, the

same thresholds will change as follows:

Figure 28. Load detection threshold - low gain setting

TDA75610S-QLX データシート(PDF) 19 Page - STMicroelectronics