Wall Mountable Display Solution

4Discovery-50

Page 39 of 43

www.4dsystems.com.au

23. Appendix 1 – (DB01 – RS485)

The following are a few additional configurations for the 4Discovery.

This image shows the 4Discovery when acting as Master, connecting to a Slaved device which is incapable of Auto

turn-around, but can have its RS485 chip controlled externally by the 4Discovery. Not a typical situation.

This image shows the 4Discovery when acting as a Slave, where the Master device is controlling the Turn pin of the

4Discovery. This is an unlikely situation, as the 4Discovery typically would be programmed to Auto Turn based on

the protocol of the Master.