B

BR

RIIG

GH

HT

T L

LE

ED

D E

EL

LE

EC

CT

TR

RO

ON

NIIC

CS

S C

CO

OR

RP

P..

Ver1.0 Page: 11 of 11

SI N CE 198 1

● Notes for designing:

Current limiting resistor must be used in the circuit to drive BRIGHT LEDs within the rated figures

and not to overload BRIGHT LEDs with instantaneous voltage at the turning ON and OFF cycles.

When using pulse driving, the average current must be within the rated figures. And the circuit should

be designed to avoid reverse voltage when turning off the BRIGHT LEDs.

● Storage:

In order to avoid the absorption of moisture, it is recommended to solder BRIGHT LEDs as soon as

possible after unpacking the sealed envelope.

If the envelope is still packed, to store it in the environment as following:

Temperature : 5℃-30℃(41℉)Humidity : RH 60﹪Max.

After this bag is opened, devices that will be applied to infrared reflow, vapor-phase reflow, or

equivalent soldering process must be:

Completed within 168 hours.

Stored at less than 30% RH.

Devices require baking before mounting, if:

(2) a or (2) b is not met.

If baking is required, devices must be baked under below conditions:

48 hours at 60℃±3℃.

● Package and Label of Products:

Package: Products are packed in one bag of 2000 pcs (one taping reel) and a label is attached to

each bag.

Label:

BRIGHT LED LOGO

Part No.

Quantity

BIN.

x

xx

xx

xx

Year Month Day

Manufacture Location

X X X X X

Sealing Date