DANUBE

http://www.danube.com.tw

2015/11/30

5-5

PRD SERIES APPLICATION NOTES:

EXTERNAL CAPACITANCE REQUIREMENTS:

No external capacitance is required for operation of the PRD series.

To meet the reflected ripple requirements of the converter, an input impedance of less than 0.5 ohm

from DC to 250KHz is required.

External output capacitance is not required for operation, however it is recommended that 10uF

tantalum and 0.1uF ceramic capacitance be selected for reduced system noise.

Additional output capacitance may be added for increased filtering, but should not exceed 100uF.

We Can Offer EMC-Filter According To EN55011/22 Class B.

Negative Outputs:

A negative output voltage may be obtained by connecting the +OUT to circuit ground and

connecting –OUT as the negative output.

FOR MORE INFORMATION CALL:

Danube Enterprise Co., Ltd.

Tel: 886-7-3755165

Fax: 886-7-3755330

E-mail: danube@ms10.hinet.net

Home Page

http://www.danube.com.tw