F2LP-W

F2LP-W

3

Amplifier Unit

Supply voltage

120/240 VAC 15%, 50/60 Hz

Power consumption

3VA max.

Sensitivity adjustment

Selector and variable resistor

Timer

DC solid-state

Normal or 40-ms OFF delay. (selectable)

Relay

One-shot, 40 ms (fixed)

Sensing

interval

DC solid-state

Normal: 75 ms max.; OFF-delay: 125 ms max. (Minimum sensing objects can be detected at

intervals specified. Larger objects need longer intervals.)

interval

Relay

75 ms max. (See note for DC solid-state sensing interval.)

Control

DC solid-state

100 mA, 40 VDC max. photocoupler output; residual voltage: 2 V max. (Refer to Engineering Data.)

output

Relay

Resistive load of 2 A at 250 VAC or 3 A at 30 VDC

Compatibility with Sensor

Heads with different

diameters

Can be connected to F2LP-WjM Sensors with a diameter of 10, 20, 50, 75, or 100 (switchable).

Compensation for cord length

Switch setting

Output form

NO or NC (switchable)

Indicators

Power and operation

Ambient temperature

Operating: --10

Cto 55C (with no icing)

Ambient humidity

Operating: 35% to 85%

Insulation resistance

50 M

τ min. (at 500 VDC) between all live terminals and non-current carrying bare metal parts, and

between all primary terminals (for power supply) and all secondary terminals (for non-contact output

and Sensor)

Dielectric strength

1,500 VAC, 50/60 Hz for 1 minute between all live terminals and non-current carrying bare metal

parts, between all primary terminals (for power supply) and all secondary terminals (for non-contact

output and Sensor), and among all contact output terminals

Vibration resistance

Destruction: 10 to 55 Hz, 1.5 mm double amplitude for 2 hours in X, Y, Z directions respectively

Shock resistance

Enclosure ratings

IEC IP30

Weight

Approx. 300 g

Engineering Data

Object Size vs. Falling Speed of Object (Typ.)

F2LP-W10M

F2LP-W20M

Object size (dia. x 0.5 mm)

Object size (dia. in 1 mm)

Iron

Aluminum

Object

Iron

Object

Heigh

t

Aluminum

Height